Used Drill Grinding Machine for sale (83,944)

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm workpiece length: 700 mm Ijdpju Ng Hnjfx Ab Isa table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees - cutting speed of grinding wheel 25m / second - central lubrification - central coolant device The machine is including accessories see pictures! *

Condition: used, Year of construction: 1981, drill diameter 32 mm drilling length 0 mm Universal Drill Bit Grinder Isdpet Hwn Asfx Ab Isa lots of accessories

Condition: used, Year of construction: 2007, turning speeds 2800 U/min drill diameter 2 - 40 mm drilling length 200 mm lip angle 40 - 180 ° total power requirement 0,76 kW weight of the machine ca. 170 kg dimensions of the machine ca. 850 x 850 x 1200 mm Equipment: - Chuck - Coolant device - Machine light - Operating instructions Iedjvdxz Ajpfx Ab Iea

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m Isdevn U Adjpfx Ab Isa This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: good (used), Grinding diameter 3-40mm Length of drill unlimited Point angle 40-180mm Point thinning device Dressing attachment Isdpfxogy Ti Dj Ab Iea MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, The grinding machine was purchased by us in 2022 and was in operation for five months. Iodpoxrkqhofx Ab Iea This grinding machine greatly helped us to be independent from external service providers. The deep hole drills could now be quickly re-sharpened in-house, which also saved us a lot of money. The necessary grinding wheels, some of them new, are included in the delivery.

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t Isdpfxsu Ng Ncj Ab Isa dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: used, Year of construction: 1988, Manufacturer: Haacke type: UW II A-CNC year of construction: 1988

 only for step drills up to max. Ø 30mm cross adjustment: 250mm height adjustment: 250mm grinding length: 400mm weight: 1,4t footprint: 2,5 x 1,2 x 1,9mm Application: for grinding steps on step drills Accessories:

 Paper belt filter make LKK Foreground flap collet chuck Forkardt Overz /BR 50/ LH-Z 24394 Iedpfog Tvmbjx Ab Ioa

Condition: ready for operation (used), Erhardt & Spiess ES 175 drill grinding machine Grinding machine You are welcome to visit us for an inspection. We will be happy to arrange cost-effective transportation for you. organize! You will receive a proper invoice. Iedju Hhtqjpfx Ab Ioa A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), Description to follow! Isdew U U Ikjpfx Ab Isa

Condition: used, Year of construction: 1996, drill diameter 3 - 50 mm drilling length 500 mm lip angle 90 - 140 ° voltage 380 V Ijdpfxsp Raizo Ab Isa weight of the machine ca. 120 kg dimensions of the machine ca. 0,80 x 0,60 x 1,30 m Serial-No.: 76658

Condition: new, grinding range 8 - 32 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 16 Kg dimensions of the machine ca. 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: Iodpfxoupxh Nj Ab Iea 430 x 240 x 240mm. Weight 16kg.

Condition: used, Year of construction: 1984, Technical details: grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. * Iodpfx Aeu Ng Irsb Ioa

Year of construction: 1987, condition: not inspected (used), Chuck for workpiece pickup is missing Iedpfshaqv Dox Ab Iea

Year of construction: 1992, condition: good (used), machine/vehicle number: 92-2083, Twist drill grinding machine Offer number: 20063 Make: SCHANBACHER Type: S 3-50 machine no.: 92-2083 Year of construction: 1992 Technical data: - simple service - Grinding process by means of gear motor - Twist drill dimensions 3 - 50 mm - acute angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - Geared motor for swivel movement 400 V / 0.12 kW - Grinding wheel dimensions Isdpfefhy N Sox Ab Iea - 175 x 22 x 20/90 x 20 mm - Space requirement approx. W 810 x D 570 x H 1260 mm - Weight approx. 120 kg - with - Clamping device - Presetting device

Condition: used, Drill grinding machine GÜHRING type SS 15 make no. 909 year of construction approx. 1977 drill diameter max. 40 mm grinding wheel diameter right 300 mm grinding wheel diameter left 250 mm grinding wheel width 40 mm grinding spindle speed approx. 2800 rpm motor power approx. 2,2 kW Mains connection 380 Volt, 50 Hz - center angle infinitely variable - Pointing device - gear motor for height oscillation in front of the cup wheel - diamond dressing holder Isdpfxedzp Tbs Ab Iea - various drill bit holders - coolant device space requirement L x W x H 1200 x 950 x 1550 mm weight approx. 1150 kg

Condition: new, Drill grinding machine Make: MOTOM Model: BSM 13 DUO Grinding range 2-13 mm Paintwork gray Areas of application: Grinding cone shell Sharpening relief grinding Scope of delivery: Isdpjguadnjfx Ab Iea CBN grinding wheel for HSS tools Pliers set from 2-13 mm increasing by 1.0 Plexiglas protective shield

Condition: new, grinding range 2 - 20 mm sharp cornered angle min./max. 90 - 135 Grad Isdpfx Ajupxkwob Ija connected load 230 V weight of the machine ca. 8,6 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: used, Year of construction: 1982, Technical details: dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min Iodpfju Ngxdox Ab Iea height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories *

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Year of manufacture: 1987 Technical data: - simple operation - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with Iodpfx Aomnntmob Ija - clamping device - presetting device

Condition: used, Technical details: drill diameter: 5,,,,40 mm drilling length: 600 mm lip angle: 90-150 ° Ijdpfjwi Ni Hex Ab Isa total power requirement: 4,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2-2-2 m CNC programmable according to ISO Point angle 90-140 degrees, disc stroke x 80mm y 80mm grinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpm Grinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1 Avyac grind / 4 faces gr. Cross for deep drill .... *

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf Iedpfx Abonzt A He Iea - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: new, Drill Grinding Machine Iedpfxjb Ecp Ae Ab Ija Make: MOTOM Model: BSM 22 grinding range 8-22 mm (with options up to 25 mm) incl. CBN 200 grinding wheel for HSS tools incl. set of pliers from 8-22 mm increasing by 1,0 mm

Condition: new, grinding range 2 - 13 mm sharp cornered angle min./max. 90 - 140 Grad Ijdpfx Aeupxdqob Ija connected load 230 V weight of the machine ca. 10 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, Drill Grinding Machine Make: MOTOM Model: BSM 13 grinding range 2-13 mm incl. CBN 200 grinding wheel for HSS tools incl. set of pliers from 2-13 mm increasing by 1,0 Isdpfx Abo Sgi Rs Ija