Used Separation for sale (6,285)

Year of construction: 2024, condition: new, WPS Eddy Current Separator, Magnetic Series. Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminium, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. WPS Separators are used in the recovery of: • non-ferrous metals from the recycling of electronic waste • non-ferrous metals from car recycling • metals from foundry waste Nwsdoiqxtbepfx Aa Dsb • aluminium in glass recycling processes • non-ferrous metals from steel waste • non-ferrous metals from municipal waste To ensure the longevity of the equipment, the ZŁOMIARZE, as one of few companies, has introduced an improvement in the form of the central cooling of the bearings of the magnetic rotor, thanks to which the service life of the machine has been extended even several times. Technical Specification: • Magnetic field source – NdFeB magnets • Smooth adjustment of magnetic rotor speed – 0-3000 rpm • Belt speed adjustment • Belt position control system • Magnetic rotor cleaning cleats • Belt cleaning scraper • Material divider adjustable in two levels • Bearing cooling system (greatly extends bearing life) • Control panel with safety check For our non-ferrous metal separator we offer additional devices to make you separation process easier: • vibratory feeder • belt conveyors • magnetic drum/belt separators For more information please download our catalog. If you're interested in our products, please contact us!

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: Nwedpfxsua D Alj Aa Dob The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: like new (used), Year of construction: 2020, Max. airflow 840 m³/h Connection diameter 200 mm Njdpfx Aewmlgcja Dewb Drive power 0.55 kW Very little used, 2 units available

Condition: new, Size: 1250*1250*1550 mm Weight: 600 kg Power: 1.5 kW Capacity: about 500–1000 kg/h Nwjdpfx Aaew Ac D Ds Dsb Bottom discharge type

Condition: new, Year of construction: 2025, functionality: fully functional, The MS+PS coolant separator by GRAFS is a device that combines the functions of both a magnetic separator and a nonwoven fabric separator. This combination allows for an exceptionally high level of coolant purification, which is crucial in machining processes. The MS+PS separator is an ideal solution for machines requiring extremely clean coolant, where contaminants include both magnetic and non-magnetic particles. By integrating magnetic filtration technology with nonwoven fabric filtration, this device ensures top-quality cleaning with minimal energy consumption. OPERATION OF THE DEVICE: 1. Initial Stage (Magnetic Separator MS): Initially, coolant containing metal chips and other magnetic contaminants passes through the MS magnetic separator. This separator is equipped with a rotating magnetic drum that attracts and retains magnetic contaminants on its surface. The coolant, cleansed of metal particles, flows forward, while the contaminants are removed from the drum surface by a special scraper. 2. Main Stage (Nonwoven Fabric Separator PS): The coolant then flows through the PS nonwoven fabric separator, where it is filtered through a specialized fabric. This fabric captures fine particles, such as grinding dust or other impurities. An additional filtration layer forms on the fabric, enhancing filtration efficiency. Nodpfjvtp Ewjx Aa Dowb When the level of accumulated contaminants reaches the maximum allowable level, a float switch activates the fabric movement, winding the used material onto a reel and replacing it with a new, clean section of fabric. The process operates automatically. The Separator is Ideal for: Lathes Milling Machines Grinding Machines Technical Specifications: Separator Motor Power: 0.09 kW, 900 rpm + i80 gearbox (includes connection cable) Coolant Pump Motor Power: 0.09 kW Filter Efficiency: Up to 100 L/min Coolant Pump Capacity: 60 L/min Tank Capacity: 150 L Separator Drum Diameter: 110 mm Drum Rotational Speed: 3 rpm Set Weight with Pallet: 150 kg Dimensions: 1000 mm x 900 mm x 650 mm MS Separator Material: Stainless steel with a 10 mm base and 5 mm walls Drum: Stainless steel tube with 5 neodymium magnets inside The nonwoven fabric is available in viscose, polyester, and polypropylene options, with a basis weight ranging from 18 to 110 g/m². The separator comes equipped with a robust, mobile tank with baffles, designed to ensure the longest possible coolant flow. It is made from welded, powder-coated steel. GRAFS is a leading Polish manufacturer of industrial knife grinders.

Year of construction: 2025, condition: new, The Zig-Zag Air Separator by Koltex Plastic Recycling Systems enables efficient separation of bulk materials into fractions with different densities. The material to be separated is fed into the device via a rotary valve, ensuring even distribution across the entire cross-section of the separation channel. Nwodpfx Aaevmxvfe Dsb Sorting is carried out using an upward airflow generated by a high-performance blower. The air flows through the separator channel, lifting lighter particles while heavier fractions fall downward due to gravity. The specially designed Zig-Zag channel forces the material to pass through the airflow multiple times at each turn. Lighter fractions are effectively lifted and discharged through the top airflow, while heavier particles remain and fall, ensuring precise and efficient separation. The separator is equipped with advanced dust extraction cyclones with filters that eliminate dust emissions throughout the process. This ensures not only high separation efficiency but also environmental safety and workplace cleanliness. Koltex Plastic Recycling Systems also offers high-quality shredders, which can be integrated at the start of the process to create a complete grinding line with the separator. This solution enables comprehensive material processing, from shredding to precise separation, providing full control over the recycling process.

Condition: good (used), approx. 490 pcs. shelf dividers (free standing) for shelf racks 80cm, SSI Schäfer - used - : Prices per piece ex location: 2,50 € (net) disassembled, packed and loaded! Manufacturer: SSI Schäfer type: TRF-D 4817 G Year of manufacture: unknown Height: ca. 17cm Depth: ca. 76cm - for shelf depth 80cm Galvanized Nwsdpfxjki Tmrj Aa Dob New price: ca. 8.-€ Condition: good Available: immediately Location: Warehouse Frankenberg (Saxony)

Condition: good (used), approx. 200 pcs. shelf dividers (free standing) for shelf racks type 2510, SSI Schäfer - second-hand - : Prices per piece ex location: 2.- € (net) disassembled, packed and loaded! Nodpfx Aekhd Uioa Dewb Manufacturer: SSI Schaefer type: TRF 25 10 year of construction: unknown galvanized new price: approx. 5.-€ Condition: good Available: immediately Location: Warehouse Frankenberg (Saxony)

Condition: good (used), Year of construction: 2007, functionality: fully functional, Granulator, separator for copper or aluminum cables. Feed rate: 9 m/min Capacity: 150 kg/h of granulated cable. Granules approx. 3 mm and a copper content range of 50%. Nwodpexxirwefx Aa Djb 15 kW 400 V 50 Hz INSTRUCTION AND MAINTENANCE MANUAL AVAILABLE

Year of construction: 2022, condition: new, The Cyclonic Dust Separator (cyclone) exploits the centrifugal and gravitational force to carry out the dedusting of the air flow. The tangential entrance of the machine forces the air to whirl around inside the structure. The contained dust loses speed due to friction with the external surface of the system and is separated thanks to the gravitational effect. The air is released in the central part in correspondence with a counter-duct which, creating a depression, attracts the air inside and allows it to escape. Nwedpfx Asihu T Tsa Dsb

Condition: new, Efficient extraction of cooling and lubricating fluids directly at the machining center The two standard units, AL-KO OIL JET 600 and OIL JET 1200, are the ideal solution for direct extraction of oil and emulsion mist from all common turning, grinding, and milling machines. Application areas: AL-KO OIL JET units are used wherever oil and emulsion mist generated during the machining process needs to be directly extracted from the workspace of modern metal-cutting machines. Depending on workspace size, operating time, and the type of coolant used, either the OIL JET 600 or the more powerful OIL JET 1200 is selected. AL-KO OIL JET units are compatible with all standard coolants and lubricants and are installed directly onto the machine tool or positioned alongside on an optional mounting column. Functionality: The highly efficient filter system of AL-KO OIL JET units features, as standard, a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st stage: Washable metal mesh filter 2nd stage: Filter mat (LoTex®) with frame 3rd stage: Main filter cassette (ePM1 80%) The first stage separates coarse particles. The second stage, made from a nanocoated, drained mat, separates and channels away emulsion content. The third stage filters out the finest residual particles. Emulsion collected mainly in the second filter stage is gathered in the lower part of the unit and can be drained off. Applications: - Lathes - Machine tools - Metal-cutting machines Advantages: Nwedpfxswwt Tlo Aa Deb - Compact design - High separation efficiency thanks to three-stage filtration - Energy-efficient EC motors - Simple, tool-free filter replacement - Numerous options

Condition: used, Year of construction: 2011, functionality: fully functional, Donaldson DCE Torit DMC-MMC filter oil mist separator, oil separator, oil extractor, air filter Year of manufacture: 2011 Connection: 400V, 1.5KW Nwjdexri T Uepfx Aa Deb Fully functional condition, see pictures Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight forwarding possible, please inquire with postal code

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Njdohlnznopfx Aa Djwb Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift max. 1280 mm Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches dead weight 660 kg good condition

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss Njdpfsdzqn Ujx Aa Dewb All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: used, Year of construction: 1992, Made in Germany Electrostatic filter Suction capacity: max 1200 m³/h Weight: 130 kg Nodpfov D Dprox Aa Dswb Operating voltage: 400 VAC, 50 Hz, Current consumption: 0.82 A

Year of construction: 2018, condition: excellent (used), - volume flow: up to 1200 m³/h - elektric: 3-Ph. 400 V - 50/60 Hz - power: 1,5 kW (IE3) - current: 2,3 A - protection class: IP54 Nwedpjg Ipn Tsfx Aa Dsb - noise: 70 dB

Condition: used, Year of construction: 1992, Made in Germany Electrostatic filter Suction capacity: max 2200 m³/h Weight: 150 kg Nedpfx Aajv D Drmj Dewb Operating voltage: 400 VAC, 50 Hz, Current consumption: 3.2 A

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Intake pipe: 180 mm Voltage: 230 V, 50 Hz Filter area: 6.0 m² Conveying capacity: 1000 m³/h Total power requirement: 0.3 kw Machine weight approx.: 78 kg Dimensions L-W-H: 400x600x700 mm Nsdpsvrfv Asfx Aa Dowb Electrostatic separator: Filter chamber L: 360 x W: 510 x H: 500mm 3 slots with: -Pre-filter (knitted stainless steel) 500x370x20mm -Ionizer/collector cell 500x370x210mm -Post-filter (knitted stainless steel) 500x370x20mm

Year of construction: 2004, condition: used, -Manufacturer: Pieralisi -Type: FPC 12 CH01 -Year of construction: 2004 Nsdep Dumdjpfx Aa Dowb -Drum volume: 13 L -Drum diameter: 396mm -Max. speed: 6450 rpm -Motor power: 15 kW -Areas of application: chemistry, pharmacy, food industry -Complete control & extensive documentation available

Condition: new, Year of construction: 2024, functionality: fully functional, Ideal for separating ferrous impurities from granulates such as plastics and dry, free-flowing powders such as flour and sugar in free-fall conveying systems. Nwsdpfx Ajuc S Ihsa Djb We would be happy to carry out a test with your material to ensure that our product optimally meets your requirements. If you have any further questions, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: VNPX 507, total height: 1,600 mm, total width: 900 mm, total length: 1,600 mm, overall weight: 830 kg, power: 11,000 kW (14,955.82 HP), control voltage: 400 V, input frequency: 60 Hz, rotational speed (max.): 8,400 rpm, Equipment: documentation/manual, 1.We are pleased to offer a factory-rebuilt Alfa Laval Type Clara 80 centrifuge, specially suited for the clarification of fermentation broths. This machine combines industrial grade robustness with high operational reliability, suitable for biotech and fermentation applications. 2.Bowl: - Type: Self-cleaning disc-bowl - Volume: 6.2 liters - Solids Holding Space: 2.5 liters - Bowl Speed: 8,400 rpm - Material: Stainless steel - Liquid Outlet: Under pressure Frame: - Material: Cast iron with stainless steel hood and solids collector - Features: Coolable hood and solids collector, Vibration monitoring system Drive System: - Type: Belt drive - Control: Frequency converter - Motor: 11 kW, 400 V, 60 Hz Mounting & Integration: - Skid Frame: Mobile, stainless steel with rollers - Installed Systems: Separator and Control system 3. Included Accessories and Components Nwjdoxrr Nfspfx Aa Djb - Control System: - Original Alfa Laval PLC (Used), stainless steel housing - Motor starter - Automated valve control for desludging (partial and total) - Valves and Meters: - 1 On/Off feed valve (automated) - 1 Electromagnetic flow meter - 1 Counter pressure valve + pressure gauge - Manual process media valves - 2 Sample valves - Tools: 1 Set of special tools for maintenance/service 4. Optional Integrated Biomass Handling Pump - Type: Air-operated double diaphragm pump - Connection: Linked to the solids cyclone of the separator - Accessories: 1 Level sensor for operation monitoring and overflow protection 5. Commercial Terms - Delivery Terms: EX WORKS Winkelhorst - Trenntechnik GmbH Kelvinstrasse 8 D-50996 Koeln, Germany (Incoterms 2020) - Delivery Time: direct available for shipment - Payment Terms: 100% before shipment 6. Compliance & Legal - CE Compliance: If applicable, conforms to EU Directive 2006/42/EC - Export Compliance: Subject to export regulations and Article 12g of EU Reg. 833/2014

Year of construction: 2024, condition: new, functionality: fully functional, Description of Use: Overband Magnetic Separator (MAGNETIC series) is applied to loose materials to automatic removal of ferrous impurities in the process of waste recycling. Njdpfx Aash D H Rce Djwb Apart from metal recovery the Separator has a protective function for equipment in further steps of recycling process. They are usually installed on top of transport conveyors. Belt separators are used in many fields: -scrap removal from coal and aggregate -wood and plastic purification -iron particles recovery from cable shredding -iron rejection from WEEE recycling process -municipal waste purification Contact us for more information

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Nwjdpfx Aaeua Tbwj Deb Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Year of construction: 2016, operating hours: 5 h, functionality: fully functional, overall weight: 19 kg, type of input current: DC, input voltage: 220 V, total height: 320 mm, control voltage: 24 V, year of last overhaul: 2025, compressed air connection: 4 bar, temperature: 60 °C, Equipment: type plate available, Implantation by gravity fall or full column. Mechanical Description: • Height: 320 mm max • Effective passage diameter: 45 mm • Aluminum ejection valve • Aluminum Chassis • Phenolic resin inner tube (anti-wear option on request) • Overload tolerated above the device: 150kg • Weight: approximately 18kg Conditions of use: • Working temperature: 0 to 60°C • Protection: IP50 • 4 to 6 bar compressed air, water and oil free filtered, quick coupling NW7.2 • Maximum product drop height: 0 to 600mm • Maximum flow rate with standard pellets from 2 to 4mm: 5400 L/H Nedpfehr R Iuox Aa Dewb • Detection sensitivity with STANDARD electronics • Ferrous: 0.35 mm • Stainless steel: 0.9 mm • This data may vary depending on the location, vibration or effect may reduce sensitivity.

Condition: good (used), approx. 900 pieces shelf dividers (continuous) for shelf racks 30cm - used - : Prices per piece ex location: 2,50 € (net) disassembled, packed and loaded! Manufacturer: SSI Schäfer Nwedpfx Aaski Tq Ij Djb type: would have to TR 3330 Year of manufacture: unknown Height: approx. 33cm height incl. "lugs": ca. 36cm Depth: ca. 26cm - for shelf depth 30cm Galvanized Original price: ca. 7.-€ Condition: good Available: immediately Location: Warehouse Frankenberg (Saxony)