Used Separation for sale (6,621)

Condition: used, mileage: 2,64,000 km, power: 110 kW (149.56 HP), first registration: 10/2009, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 08/2027, color: white, gearing type: mechanical, emission class: euro4, number of seats: 5, total length: 6,360 mm, total width: 2,240 mm, total height: 2,980 mm, Year of construction: 2009, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, 1st owner. Very well-maintained vehicle. Inspection and TÜV (technical inspection) recently completed. All-wheel-drive ambulance Mercedes Sprinter 515 CDI with WAS ambulance body. Euro 4 engine, 4-cylinder, 2148 ccm / Green environmental badge. 6-speed manual transmission. 148 km/h. All-wheel drive can be engaged via a push button. Wheelbase: 3665 mm. CD radio. GARMIN navigation. Automatic climate control (Tempmatik). Airbags for driver and front passenger. Eberspächer Hydronic D10W auxiliary heater (diesel heater). ABS and ASR. ESP. Dwjdpezztm Rjfx Aptjb Rear-view camera with monitor. Electrically adjustable exterior mirrors and windows. Central locking with remote key. 2 original Mercedes remote keys plus 2 manual body keys included. Previously registered as "Other motor vehicle, ambulance, rescue vehicle, closed". Last registered with green license plates. Equipped with a special warning system. Overall vehicle dimensions: Length 6.36 m, width 2.24 m, height 2.98 m. Unladen weight according to vehicle documents: 3785 kg. Permissible total weight: 4600 kg. Electrically extending step at the side sliding door in the body on the right. 5 registered seats, including 3 emergency seats for accompanying personnel in the ambulance body, plus 1 stretcher. DUNLOP winter tires from 2015 with snowflake symbol, all in good condition, twin tires at the rear. TÜV valid until 04.08.2026, valid until August 2027. Last inspection at 263,224 km, engine/transmission/front axle/rear axle, all oils replaced. Door sills/doors are rust-free, minimal rust on the underbody, overall in exceptionally good condition for an ambulance from the 2009 model year. This Sprinter was initially used in regular ambulance service and in recent years was only used occasionally by the "Ambulance Support Group". Despite limited use, it was always serviced and parked in a garage to ensure full operational readiness until the last day of service. The Sprinter was deregistered by the original owner on 07.09.2026 and then driven to us without any problems for 700 kilometers on the highway. No error messages or other malfunctions, the car works perfectly. Interior is clean. Appearance is quite appealing for its age. Air conditioning is reportedly weak according to the driver. 1 boot of the lower right ball joint is damaged (status GM "minor defect" at TÜV. Otherwise without defects). This offer is only valid for businesses and freelancers of all kinds and in all industries, and also for authorities and emergency services of all kinds. Direct sale to private end consumers is unfortunately generally excluded. Subject to prior sale and errors. The selling price is the final price/payment amount, gross = net. The differential tax applies according to §25a UStG. This means that the value-added tax cannot be deducted separately and is also not additionally due.

Condition: ready for operation (used), Year of construction: 2018, Volume flow: 12500Bm³/h, total pressure difference: 40mbar, motor power: 22kW, speed: 3000rpm, machine weight: 1275kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025. Dwsdjvzbg Nopfx Aptsb

Condition: ready for operation (used), Year of construction: 2019, operating hours: 22,918 h, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 4,250 kg, spindle speed (max.): 24,000 rpm, number of axes: 5, This 5-axis DMG MORI DMP 70 was manufactured in 2019. It features a maximum spindle speed of 24,000 rpm and a weight of 4,250 kg, making it a robust option for precision machining. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMP 70 vertical machining centre we have for sale. Contact us for further details. Dwodpfx Ajzx Sryjptsb - Phase: L1/L2/L3/N/PE- Power Consumption: 30 kVA- Maximum Current (A In max): 43.5 A- Rated Current: 50 A- Short-Circuit Current (V max): 5 kA / 440 V max.- Voltage: 400 V ±10%- Frequency: 50 Hz- Control Voltage AC: 230 V- Control Voltage DC: 24 V- Control: 3D Control Siemens 840D SL Operate- Tool Taper: BBT30- Work Table: Integrated NC rotary tilt table, 5-axis simultaneous operation- Swivel Range A-Axis: -120° / +100°- C-Axis Operation: Continuous (Endless)- Maximum Load C-Axis: 100 kg- Table Diameter C-Axis: Ø290 mm- Drives: Torque drives including direct path measurement in A- and C-axis- Software Packages: Sinumerik MDynamics 5-Axis, 3D data model for simulation- Table Options: Clamping pneumatics (1-circuit)- Coolant & Chip Management: Chip conveyor, Production package belt filter with 40 bar internal coolant supply (IKZ), Blow air through spindle center, External blow air, Oil and emulsion mist separator system- Measuring & Monitoring: RENISHAW 3D touch probe kit, Tool breakage monitoring and in-machine measurement, Preparation for 3D quickSET- General Options: Operating mode 3, CE conformity- Automation Interface: Automation interface for external automation on the right- Automation System: DMG MORI WH 3 Cell- Robotic Arm: Fanuc LR Mate 200iD/7L yellow 6-axis robot- Robot Gripper: Double gripper PGN64- Automation Components: 10 DMG drawers, NIO chute, Alignment station, Measuring drawer, Raw material inlay system, Gripper set, Accessories- Machine Operating Hours (from control screen): Machine runtime: 22,918:34 h; Program runtime: 20,920:40 h; Spindle runtime: 18,815:51 h

Condition: used, Separator for clarifying fruit juice Additional title: Plate centrifuge with self-emptying drum Drum speed: 5000 rpm Density liquid: 1000 kg/m³ Density solid: 1200 kg/m³ Features: Centrifuge, motor, sludge discharge, control cabinet Dsdpoztx S Nefx Aptowb

Year of construction: 2003, condition: reconditioned (used), Machine inspected. Disassembled and ready for container transport (2). Wear-resistant liners. New bearings. Dwodeizkxwepfx Aptob Throughput capacity of 160 tons per hour. 50 kW to 150 kW motor, depending on requirements. Current installed motor: 75 kW.

Condition: used, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, total height: 2,250 mm, total width: 1,500 mm, total length: 1,500 mm, table length: 580 mm, input voltage: 380 V, AEG-Elotherm Elbomat 222s zinc spark machining center, equipped with an Elopuls generator, Eroplan control system, separate control cabinet, and ELESTA Visulesta II operating unit. Complete machine with work tank and documentation. Technical specifications: - Table dimensions: 580 x 310 mm - Max. table load: approx. 400 kg - X / Y travel: 300 / 200 mm - Z-axis stroke: 200 mm - Tank dimensions: 750 x 530 x 400 mm - Generator: AEG-Elotherm Elopuls - Control system: Eroplan - Operating unit: ELESTA Visulesta II - Connection: 380 V - Dimensions: approx. 150 x 150 x 225 cm Included: original AEG-Elotherm / Elbomat documentation. Dwedpfezzmgqox Aptob The machine is sold in its current condition (used, from a bankruptcy, Apeldoorn, Netherlands). Disassembly, loading, and transport are the responsibility of the buyer; the buyer is responsible for providing tools, lifting/loading equipment, and packaging. Inspection is possible by appointment.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0803078, spindle diameter: 40 mm, type of input current: three-phase, number of spindles: 4, For sale: Leadermac Linnerman 423c with four 40mm spindles, featuring a feed system controlled by a potentiometer. The maximum feed speed is 30 meters per minute. The control panel is mounted separately on a trolley. The equipment is disconnected from the power supply. Spindles: 4 shafts, diameter 40 mm. Feeding system: Variable feed speed controlled via a potentiometer. Feed speed: Adjustable up to 30 m/min. Djdpfxezvalpj Aptowb Control panel: Separate control unit mounted on a mobile trolley.

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). Dwjdpfx Apsyw Rzastsb The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Input: 125 mm (d) Djdont Uc Repfx Aptjwb We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Condition: used, Year of construction: 2010, functionality: unexamined, machine/vehicle number: B0.01177.0628, operating pressure: 570 bar, type of input current: three-phase, input voltage: 400 V, temperature: 70 °C, volume flow: 7.44 m³/h, water pressure: 570 bar, pump capacity: 124 l/min, rotational speed (max.): 1,500 rpm, Equipment: type plate available, For sale is a Hammelmann high-pressure pump unit on a base frame, with a 132 kW three-phase motor and a partially transparent protective housing. The exact model designation is not explicitly stated on the existing nameplates; the following data for the offered machine are decisive. Technical data according to the pump and motor nameplates: - Machine number: B0.01177.0628 - Order number: 09.11179.1046 - Year of manufacture: 2010 - Maximum operating pressure: 570 bar - Flow rate: 124 l/min - Piston diameter: 40 mm - Pump drive power: 131 kW - Speed: 1,500 rpm - Maximum fluid temperature: 70 °C - Pressure control valve: 0022 - Oil type: BM 320 - Oil quantity: 12.5 l - Oil pressure: 2.0 bar - Motor: AC Motoren GmbH/Küenle AH 315 MA-4 - Motor power at 50 Hz: 132 kW - Motor voltage at 50 Hz: 380–420 V Δ / 660–720 V Y - Motor protection class: IP55 Dsdpfxezzr Nqj Aptswb Visible scope of supply according to the images: - Hammelmann high-pressure pump - 132 kW three-phase motor - Coupling and drive - Pressure control and safety valves - Lubrication/oil unit - Connection lines and cables - Base frame and partially transparent protective housing Used condition with dirt and/or oil stains, paint chipping and surface rust, especially on the motor protection grille. The functional condition has not been re-checked after disassembly; therefore, it is sold as untested. No separate control cabinet, no lance, and no long high-pressure hose are included. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and upon prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Year of construction: 2011, condition: like new (used), functionality: fully functional, X-ray sorting machine. Manufacturer: TITECH TOMRA Type: X-TRACT 1200 Machine in PERFECT working condition. Complete machine overhaul performed. Djdpfxsyy A Uwj Aptjwb Source replaced: €35,000 All sensors replaced: €29,000 Belt replaced: €10,000 Application: Sorting of brominated plastics in D3E streams Sorting of metals Sorting of wood, glass, and PVC for the production of RDF (Refuse-Derived Fuel) Sorting of organic waste

Operating hours: 240 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: MSB14, Machine fully disassembled and overhauled with new and original GEA-Westfalia spare parts. During the overhaul, the bevel gear set, among other components, was replaced with new and original parts, and the frame was oven-painted. Hydraulic capacity: Up to 8,000/9,000 l/h Effective capacity: between 500/1,000 l/h, as measured during testing with your processed product; capacity may vary considerably depending on the percentage of solid residues present in the product to be treated. Technical specifications: - 7.5 kW electric motor – 380V/3ph – 50Hz - Drum volume: 6.9 l – sludge chamber: 3.9 l - Drum speed: 7,500 rpm The machine is sold complete with the following accessories: - Set of special wrenches for drum disassembly - New electric panel with 11 kW inverter-controlled power section and PLC-operated discharge control section, inside stainless steel housing The inverter enables smoother operation and significantly reduces power consumption and maintenance\. - New operating water unit with 20 l stainless steel tank, complete with float and stainless steel pump, to ensure consistent flushing - Flow indicator - The machine is mounted on a heavy-duty base with four M20 anti-vibration mounts in square profile steel. Dwedpsxvrfnsfx Aptob

Condition: excellent (used), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Alfa laval CHPX510SGD-35CGRX separator complete system including engine Valve rig Control cabinet Starter cabinet Solids pump Cyclone Sludge tank Foundation plate Vibration damping feet Tools for bowl Compression tool Inert gas system Documentation Dedpfsucct Ijx Aptowb Previosly used by alfa laval for training

Year of construction: 2025, condition: like new (used), Separator Terra-Star TSC.134, used, year of manufacture 2025 Maintenance-free, screening line 0- mm, mixing blocks M80X wear zones armoured with hardfacing wire. Application with mixing shafts: Mixing in lime or binding agents to dry soil, blending with compost, sand, other soils, etc. while simultaneously crushing soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost while simultaneously separating out branches, roots, etc. that cannot be shredded. Crushing friable stones from construction debris such as pumice, bricks, Poroton, while simultaneously separating pieces over mm in size; larger and hard parts remain in the separator. Feeding clumpy soil into a screen reduces waste and increases throughput. Equipped with OQ70/55. Price does not include adapter plate. For equipment returned from rental, the machine is inspected and comes with a 12-month warranty. Dwodoyf Atvjpfx Aptsb For excavators from 12 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 50 m³/h Drain line connection required: 2 Series: TSC.134.018

Condition: ready for operation (used), Year of construction: 2014, Volume flow: 6300Bm³/h, total pressure difference: 40mbar, motor power: 11kW, speed: 3000rpm, machine weight: 400kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025. Dwodpfx Apjvzbhaotsb

Condition: good (used), Max. External Dimensions: Diameter: 580 mm Height: 1160 mm Weight: approx. 50 kg Djdpfx Apszqc E Ustowb Condition: good, second-hand

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: E61SI17032579879, This is an SCC 61 WE combination steam oven in an electric version, manufactured by the premium brand Rational, built in 2017. The unit will be completely overhauled in our in-house workshop, and the combination steam oven is fully functional. The base shown in the picture is not included in the offer but can be purchased as an option. AVAILABLE FROM WEEK 35!! The recommended retail price is €9,400 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician. Are you looking for a specific Rational equipment type? Ask us; we have access to a large range of used and new equipment. We will gladly advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. This combination steam oven offers space for 5x 400x600mm trays. In automatic mode, the unit automatically detects the ideal cooking path, the size of the food, the quantity loaded, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845x850mm Power connection: V: 400 / kW: 11 / Hz: 50/60 Capacity: 6x 1/1GN Weight: approx. 110 kg Serial number: E61SI17032579879 Year of manufacture: 2017 Condition: used, completely overhauled, fully functional Further details: In combination steam oven mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C). Care Control – self-cleaning system Core temperature sensor Handheld spray nozzle with automatic retraction 8.5-inch color display and touchscreen Dsdpfxszw H Slj Aptowb 5 fan speeds programmable Integrated, maintenance-free grease separation system Automatic start time selection 7 cleaning levels for unattended cleaning – even overnight Moistening adjustable in 3 levels – from 30°C to 260°C 5 programmable proofing levels USB interface Joint-free, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like a consultation, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Extraction capacity approx. 500 m³/h Motor output approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99 % at ≥ 1–2 µm (F9), optional HEPA 99.95 % at ≥ 0.1 µm Noise level approx. 65 dB (model WS2 similar) Accessories & Features • Compact design for installation directly on or next to CNC machines • Stand for extraction • Three-stage filtration for efficient oil and coolant mist separation • Cartridge filter optionally upgradable with HEPA kit • Easy maintenance, low-noise operation, and durable filter elements Technical data and information subject to change and error. Prior sale reserved! Dwsdpfx Aszx Rrreptsb

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: 3171, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, Bylaser 4400. CO2 laser. Sheet metal thickness: steel, 20 mm. The sheet metal laser is being sold due to the purchase of a new laser. Very few operating hours (see photo). Includes cooling unit. Complete documentation is available. Dwedpfx Aezvncijptjb Regular maintenance performed. Dust extraction system, manufacturer Donaldson DFPRE4L-R, can be purchased separately (see separate listing). Without vacuum suction unit. Can be inspected while powered on until September 14, 2026. No dismantling included. Dismantling must be organized independently. Dismantling must be completed between September 15 and 17, 2026.

Year of construction: 2021, condition: ready for operation (used), Suitable for the separation of free oils from cooling lubricants, max. output: 500l/h, max. liquid temperature: 70°C, pH value: 6-9, length: 620mm, width: 510mm, height: 1140mm, weight: 60kg, with documentation. Dwodpfx Apok E Nccetsb

Condition: like new (used), Year of construction: 2024, operating hours: 2,468 h, power: 39 kW (53.03 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, workpiece length (max.): 1,700 mm, workpiece width (max.): 800 mm, workpiece height (max.): 800 mm, workpiece weight (max.): 1,500 kg, number of slots in tool magazine: 60, total height: 3,000 mm, total length: 5,800 mm, total width: 4,300 mm, overall weight: 15,000 kg, table length: 1,700 mm, table width: 800 mm, mount diameter: 40 mm, number of spindles: 1, power of the milling unit: 39,000 W, rapid traverse Z-axis: 32 m/min, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, space requirement width: 4,300 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, POSmill E 1600 Control system: Heidenhain iTNC 640 Travel in X: 1600 mm Travel in Y: 800 mm Travel in Z: 800 mm Dodpfxovwlp Hs Aptewb Table size: 1700 x 800 mm SK 40 tool holder Number of tool positions: 60 Max. spindle speed: 10,000 rpm Rapid traverse rate: 32 m/min Weight: 13.5 t Operating hours: only 2,468 h (as of August 20, 2026) Equipment: - Glass scales in all 3 axes - Hexagon 3D infrared probe system - Air through the spindle - Coolant system 20 bar with band filter unit - Mobile electronic handwheel - Heidenhain iTNC 640 - Tool changer with 60 positions, accessible from the front The machine is currently in our production facility and is still in use. Delivery is possible on short notice, subject to agreement. Training on the machine, transport, and commissioning are available for a separate fee. The machine has been regularly maintained and is in very good condition. Sale without accessories such as clamping devices, chip containers, workbenches, and tools.

Condition: used, Year of construction: 2008, functionality: fully functional, total height: 2,100 mm, total length: 1,800 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 255 kg, table load: 200 kg, input voltage: 400 V, A down-draft table combines a workbench with an exhaust/filtration system. Fumes and dust are extracted through the tabletop and rear panel and filtered by filters mounted in the table structure. The table can be placed anywhere, at any welding or grinding station. A three-stage spark separator enhances safety and meets the most stringent international guidelines for fumes and dust. DraftMax Advance features a manually operated filter cleaning mechanism activated by a button. In addition, the DraftMax Ultra model can be equipped with an automatic start/stop device, which provides even easier operation. This is an ideal table for very intensive welding or grinding applications. Work surface dimensions: 1366 mm x 750 mm Weight: 255 kg Dwsdpozukv Nofx Apteb Noise level: 67 dB (version with silencer and HEPA filter) Supply voltage: 400 V/3~/50 Hz Motor power: 2.2 kW Capacity: 2500 m³/h Filtration area: 2 x 26 m² Filtration efficiency: >99.9% (filter class: M) HEPA filter (required for stainless steel welding) Noise silencer Stock number: 1151

Condition: excellent (used), Year of construction: 2019, Horizontal, semi-automatic bandsaw machine in a robust design, intended for professional use. The machine is equipped with a coolant system as standard; its design separates coarse dirt from the required coolant. The saw frame can be easily pivoted, allowing for bevel cuts on both sides, up to 60° to the right and up to 45° to the left. The pivoting saw frame is secured using a clamping lever. Semi-automatic operation: At the touch of a button, the complete cutting cycle is performed – tensioning the material, starting the saw blade and the cooling system, carrying out the cutting process, stopping the saw blade and the cooling system, returning the saw frame to the adjustable starting position, and opening the clamping device, resulting in comfortable and efficient operation. Operation in manual mode is also possible. The clamping pressure can be adjusted via the hydraulic unit. * The table rotates with the pivoting action, preventing cutting into the table. * Precise carbide guides for accurate cuts. * Display for saw blade tension. * Saw blade speed is frequency-controlled, ranging from 15-90 m/min. * Saw blade dimensions: 2880 x 27 x 0.9 mm * Optional laser line and micro-spray system. The saw blade can be changed easily and quickly, which simplifies the use of the appropriate saw blade and also protects the machine and the saw blade. Dodpfx Aozwv Ntsptjwb

Condition: used, Year of construction: 1988, operating hours: 2,360 h, Equipment: soot filter, Ref. No.: B - 02 * O&K * RH 6 * Crawler chassis * with vibratory hammer * approx. 2360 operating hours * fully functional Trade-in possible Financing from 4.99% Dwodpjxvf S Ijfx Aptjb Subject to errors and prior sale! The information in this listing is non-binding descriptions and does not represent guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Listed equipment should be checked separately. All information in the listings is non-binding! Delivery available throughout Germany upon request Opening hours: Monday to Thursday from 9:00 am to 5:00 pm, Friday from 9:00 am to 2:00 pm, and by appointment!

Condition: used, Mayfran Emulsion Treatment System, Emulsion Separator, Chip Handling System, Used Machine Dwedpfx Apsy Uc Tpotjb Manufacturer: Mayfran Overall dimensions: 3300 x 2100 x 2200 mm Year of manufacture: 2004 Processing and filtration capacity: 700 l/min Filtration precision: 40 ppm > 20 µm Tank volume: 7250 l Pump performance: 4 kW; 160 l/min; 5 bar