Used Shark 282 Sxi Evo for sale (2,400)

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, mast type: standard, fork carriage width: 525 mm, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Mast type: Standard Technical condition: New Hodpexdqqfefx Aabenu Steering wheel: Rubber; Load rollers: Polyurethane; Tandem; Colour: Green; Version: EVO, manual drive and lifting, entry/exit rollers, 3D steel tiller, proportional lowering valve

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,688 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, gearing type: hydrostat, battery capacity: 500 Ah, battery voltage: 48 V, front tire type: cushion tires (non-marking), rear tire type: cushion tires (non-marking), Equipment: CE marking, full service history, lighting, pallet forks, sideshift, For Sale: Linde E16C-02 EVO Electric Forklift with 1600kg Load Capacity Are you looking for a reliable and efficient electric forklift for your business operations? 2Bro-Trading B.V. in Mol, Belgium, is offering a well-maintained Linde E16C-02 EVO, built in 2017 with only 4,688 operating hours. This forklift is equipped with high-quality specifications to optimize your internal logistics processes. Key Specifications: • Lift Height: 4,625 mm • Overall Height: 2,121 mm • Free Lift Height: 1,519 mm Hnsdpjxmhvqofx Aabju • Load Capacity: 1,600 kg • Independent Side Shift: Allows precise and flexible handling of various loads. • Tyres: Fitted with four brand new Trelleborg XP800 Non Marking tyres. • Controls: Equipped with a single-foot pedal for intuitive and efficient operation. • Accessories: Work lights, orange rotating beacon, bluespot, and red side markers for enhanced visibility and safety. • Charger included: Supplied with a matching charger so you can get to work immediately. Advantages of the Linde E16C-02: • Excellent Maneuverability: Thanks to its compact design and innovative Linde combi-steer axle, this four-wheel forklift is ideal for use in narrow aisles, with minimal tyre wear and no floor damage. • Ergonomic Design: The spacious cab and intuitive controls, such as the Linde Load Control and twin-pedal system, ensure a comfortable working environment that enhances productivity. • Reliable Performance: The powerful AC motors and Linde Load Control system provide precise and efficient load handling. • Low Maintenance Costs: Maintenance-free components such as AC motors and wet disc brakes minimize downtime and servicing costs. This Linde E16C-02 is immediately available at 2Bro-Trading B.V. in Mol, Belgium. Visit us to see this forklift in action and experience how it can improve your business processes. Interested? Contact 2Bro-Trading B.V. today to schedule a viewing!

Condition: excellent (used), Year of construction: 2022, operating hours: 1,530 h, functionality: fully functional, power: 129 kW (175.39 HP), For sale: Arjes Impaktor 250 EVO Year of manufacture: 10/2022 Operating hours: 1530 Equipped with paddle shaft for wood, plastic, commercial waste, etc. A concrete shaft is also included. The machine is fully operational and can be inspected during operation. Hnedpfx Asw Nyt Isabsu

Condition: used, Year of construction: 2019, operating hours: 4,943 h, functionality: fully functional, Shredder Willibald EP 5500 Manufacturer: Willibald Model: EP 5500 Shark II Year of manufacture (according to nameplate): 2019 Hnedpfx Aaow Imy Eobju Operating hours (read off): 4,943 Base machine – Shark II – 32 – 2-axle drawbar chassis, MAN engine 520 hp, Stage IV, flail set 32er with tungsten carbide, rubber belt; neodymium magnet; hydraulic, extended 4.5 m, steel motor hood, standard; central lubrication with pump; EP 5500 hydraulic support leg; extended feed hopper, hydraulically foldable; standard paintwork; cross-diagonal shredding flaps; standard hydraulic oil; 24V road lighting system as per StVO – EP 5500 decals & documentation – language: German; hydraulic quick-change hub system 32er; radio remote control; crawl drive; towing eye 50 mm; special equipment – 3-part basket screening system – compressed air hose – special decals; cross-diagonal shredding insert, welded; compressed air hose package for tools. Various spare parts Net purchase price plus statutory VAT. VAT will be shown separately on our invoice. Subject to change, errors, and prior sale. Sale is without warranty or guarantee and only to businesses. Enquiries will be processed Monday to Friday between 8 a.m. and 4 p.m.

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height -- mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Fully automatic band saws with two-column guide for series cuts in particular materials that are difficult to machine and solid material. With this machine, MEP offers you a machine that is technically on the highest level and by using the highest quality materials one is not has an unbeatable, robust and torsion-resistant structure. An extreme Robust saw bow made of gray cast iron ensures the necessary stability impressive cutting results and the strong cast iron columns which the saw arch slides by means of pre-stressed linear guides take care of themselves at maximum load for the highest cutting precision. The modern Machine control (MEP NC 5.0) offers the user maximum ease of use and ensures trouble-free operation. (Check/evaluation/correction in real time) HIGHEST PERFORMANCE > The 2 operating modes (semi-automatic and automatic) make this possible efficient cutting in all conditions. > The control allows up to 100 cutting programs with each different quantities and lengths and minimizes the Programming time for frequently executed jobs. > The automatically detected start position of the saw head reduces the setting time. > The feed of the saw head via driven hydraulic cylinders Linear guides with preloaded recirculating ball bearings ensures the Reduction of mechanical vibrations during cutting and higher Stability. > The automatic alignment of the front saw blade guide head depends on the dimensions of the bars to be cut reduces the processing time. > The saw blade is tensioned by the brushless motor and is constantly controlled and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and cuts all lengths. > The vertical pair of rollers allows any type of bar or bundle that Hnsdpfelf Tu Uox Aabsu to be fed, to hold and to align. > The vector converter for stepless adjustment of the blade speed from 15 to 100 m/min allows cutting of any material. > The motorized chip conveyor can be positioned to the right or left of the cutting area to be assembled. CHARACTERISTICS: Fully automatic control - NC 5.0 -Innovative (Windows CE based) touch screen control with additional software Touch buttons for common operating functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via an in cylinder mounted servo valve, constant monitoring of the preselected torque 4 and with precise feed adjustment in millimeters/minute 5 -Setting / pre-selection of the stepless belt speed in m/min. -Saw band tension with band tension control and indication on the display by means electronic converter -Automatic detection of the beginning of the cut -Large 7" color touch screen to display and select all Machine functions and parameters and programming in a matter of seconds. Advertisement detailed alarm and error messages -Numerous special functions including different lengths + quantities (10 Run programs) as a sequence, clean cut, step execution and much more. -Stable, torsion-resistant and low-vibration cast steel saw frame -Carbide band guides for maximum cutting precision, hinged for easy saw blade change -Largely dimensioned deflection pulleys, adjustable, made of cast steel integrated belt circulation contro...

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 9,947 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load centre: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Double-pedal Condition: Refurbished without warranty Technical condition: Good Hsdpfx Aasxllt Dsbsnu Front tyre type: Non-marking Front tyre size: 18x7-8 Front tyre condition: 60 - 80% Rear tyre type: Non-marking Rear tyre size: 140/55-9 Rear tyre condition: 60 - 80% Battery voltage: 48V Battery capacity: 500Ah Battery manufacturer: GNB Battery type: PzS Battery year of manufacture: 2014 Battery condition: 60 - 80% Description: Handed over with new FEM 4.004 inspection incl. inspection booklet Sideshift, Sideshift pre-installed, 4th valve to carriage, 3rd valve, 4th valve, rear work lights, front work lights, front windshield, full free lift, safety light, single-pedal control,

Condition: used, Year of construction: 2001, cutting diameter 210 mm capacity 90 degrees: flat 270 x 200 mm capacity 90 degrees: square 200 mm Hedpfexlufiex Aabonu capacity 60 degrees: round 90 mm turning speed range: 36 / 72 m/min engine output 0,7 / 0,81 kW dimensions of saw-band 2750 x 27 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 0,8 x 1,4 x 1,5 m Band saw machine with autocut - miter device max. 60 ° - Feed roller conveyor 1500mm - Discharge roller conveyor with measuring stop 1500mm - Coolant device

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,146 h, load capacity: 1,400 kg, lifting height: 4,100 mm, free lift: 1,343 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 1,946 mm, battery capacity: 500 Ah, battery voltage: 48 V, front tire type: cushion tires (non-marking), rear tire type: cushion tires (non-marking), Equipment: CE marking, gripper hydraulics, lighting, pallet forks, sideshift, For Sale: Linde E14-02 EVO Electric Forklift with 1400 kg Lifting Capacity Are you looking for a reliable and efficient electric forklift for your business operations? 2Bro-Trading B.V. in Mol, Belgium offers a well-maintained Linde E14-02 EVO, built in 2017 and with only 3146 operating hours. This forklift is equipped with premium specifications that will optimize your internal logistics processes. Key Specifications: - Lifting height: 4100 mm - Overall height: 1946 mm - Free lift: 1343 mm - Load capacity: 1400 kg - Separate sideshift: Enables precise and flexible handling of various loads. - Tires: Equipped with four excellent Continental solid tires - Controls: Fitted with a single foot pedal for intuitive and efficient operation. - Accessories: Work lights, orange beacon, blue spot, and red side lighting for increased visibility and safety. - Includes built-in charger: Allows flexible charging in various locations! Advantages of the Linde E16P-02: - Outstanding Maneuverability: Thanks to its compact design and the innovative Linde combi-axle, this four-wheel forklift is perfectly suited for narrow aisles, with minimal tire wear and no floor damage. - Ergonomic Design: The spacious cabin and intuitive controls, such as Linde Load Control and the twin-pedal system, provide a comfortable working environment, boosting productivity. - Reliable Performance: The powerful AC motors and the Linde Load Control system ensure precise and efficient load handling. Hnjdpfoxmgabox Aabou - Low Maintenance Costs: Maintenance-free components like the AC motors and wet disc brakes minimize downtime and reduce maintenance expenses. This Linde E15-02 is immediately available at 2Bro-Trading B.V. in Mol, Belgium. Visit us to see this forklift in action and experience firsthand how it can enhance your business processes. Interested? Contact 2Bro-Trading B.V. today to arrange a viewing!

Condition: good (used), Year of construction: 2018, Burning/Drilling System Plate Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year of Manufacture: 2018 CNC Control Power Source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic tool turret Tool holders: 14 Hnsdpfxovzrcze Aabsu Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring (scribing): 5 to 40 mm Sheet size min.: 1,500 x 300 mm (750 x 400 mm with restrictions) Minimum finished part size: 80 x 80 mm Max. sheet weight: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or sheets: 4,000 x 2,000 mm Datum position cross transporter Number of carriages: 2 clamps NC infeed carriage, positioned on the side 4 clamping jaws (2+2) 3 short-stroke cross conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with lowerable discharge table and chute Material collection container for the discharge of small parts. Filter unit including piping Powerful for the use of carbide tools. For drilling, thread cutting, marking, milling, and plasma cutting of flat steel and sheet metal. Software options for milling and scribing LANTEK license Availability: Immediately 91025ä

Condition: excellent (used), Specifications Manufacturer LIEBHERR Model LC 282 CNC Condition Used Stock Number Factory Max working diameter 280 mm Module 7 Worktable diameter 250 mm Worktable revolutions 100/200 rpm Min-max distance btw workpiece and hob 30 - 300 mm Hob head inclination angle 45° Hsdpjxgpqcjfx Aabenu Max hob diameter 160 mm Machine weight 12500 Kg

Condition: used, Year of construction: 2015, fuel type: diesel, weight max. in kg 2500 kg stroke 4150 mm load center 600 mm free lift 150 mm construction height 2814 mm fork length 1200 mm fork holder width 1150 mm Hnedpfxet Symro Aabju Frame width 1050 mm daylight opening 110-1320 IK-IK mm

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 6,431 h, load capacity: 5,000 kg, lifting height: 3,750 mm, free lift: 150 mm, fuel type: diesel, mast type: standard, construction height: 2,770 mm, fork carriage width: 1,350 mm, fork length: 1,700 mm, drive type: Diesel, construction width: 1,350 mm, Diesel Forklift Load Centre: 600 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Standard Transmission: Double Pedal Speed Class: 20 Condition: Refurbished without warranty Technical Condition: Good Front Tyres Type: Superelastic Front Tyres Size: 300-15 NEW Front Tyres Condition: 80 - 100% Rear Tyres Type: Superelastic Rear Tyres Size: 250-15 NEW Rear Tyres Condition: 80 - 100% Description: Handover with new FEM 4.004 inspection including inspection certificate / new maintenance. For further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik. We are happy to provide leasing & financing offers as well as delivery at attractive rates upon request. We also accept trade-ins of Linde equipment – even if you do not purchase a machine from us. The operating hours displayed have been read at the time of listing. Subject to prior sale, modifications, and errors. Hsdpfjxlltwjx Aabsnu Sideshifter, Fork Positioner, Durwen Fork Positioner with Sideshift 3rd Valve, 4th Valve, Rear Working Lights, Front Working Lights, Heater, Soot Filter, Road-legal (StVZO), Full Cabin, Air Conditioning, Safety Light, Rotating Beacon, Monopedal, Seat Heating, LED, Comfort seat with fabric upholstery, air suspension, and seat heating, Flashing Beacon, Split Door, Pre-dust Separator

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Hodpfx Aasfg E H Ejbonu Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,243 h, load capacity: 1,600 kg, lifting height: 6,625 mm, free lift: 2,369 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,968 mm, gearing type: hydrostat, battery capacity: 500 Ah, battery voltage: 48 V, DGUV certified until: 10/2026, tire condition: 90 %, Equipment: CE marking, lighting, pallet forks, sideshift, For Sale: Linde E16-02 EVO Electric Forklift with 1600kg Lifting Capacity Are you looking for a reliable and efficient electric forklift for your business operations? 2Bro-Trading B.V. in Mol, Belgium, is offering a well-maintained Linde E16-02 EVO, manufactured in 2018 and showing 4,243 operating hours. This forklift comes equipped with high-quality specifications to optimize your internal logistics processes. Key Specifications: Hedpfjxmf T Tjx Aabjnu Lifting height: 6,625 mm Overall height: 2,968 mm Free lift height: 2,369 mm Load capacity: 1,600 kg Independent sideshift: Enables precise and flexible handling of various loads. Tyres: Fitted with four well-maintained solid tyres Controls: Single pedal operation for intuitive and efficient handling. Accessories: Work lights, orange beacon, bluespot, and red side marker lights for enhanced visibility and safety. Charger included: Supplied with a matching charger, so you are ready to operate immediately. Advantages of the Linde E16-02: Excellent Maneuverability: Thanks to its compact design and the innovative Linde combi-steer axle, this four-wheel forklift is perfectly suited for use in narrow aisles, with minimal tyre wear and no floor damage. Ergonomic Design: The spacious cabin and intuitive control elements, such as Linde Load Control and the twin-pedal system, provide a comfortable working environment, boosting productivity. Reliable Performance: Powerful AC motors and the Linde Load Control system ensure precise and efficient load handling. Low Maintenance Costs: Maintenance-free components such as the AC motors and wet disc brakes minimize downtime and maintenance expenses. This Linde E16-02 is available immediately at 2Bro-Trading B.V. in Mol, Belgium. Visit us to see this forklift in operation and experience how it can improve your business processes. Interested? Contact 2Bro-Trading B.V. today to schedule a viewing!

Condition: used, mileage: 41,534 km, power: 316 kW (429.64 HP), first registration: 05/2021, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, next inspection (TÜV): 09/2025, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Right-hand drive, TollCollect, ASR (Anti-Slip Regulation), ESS (Emergency Stop Signal), EDC engine control, BreakMatic, MAN RIO Box, air-sprung driver comfort seat, entry lighting for driver and passenger, sun visor, LED daytime running lights, steered and liftable trailing axle, MAN Media Truck radio with European navigation map, 7-inch color display, central locking, electric window regulators, Brake Assist 2, emergency braking signal (ESS), Lane Guard System, hands-free functionality for two mobile phones, HS Speedline PPK sideloader, Evo Lift MEKRA turning assistant (on the right side with underrun protection for the vertical Evo Lift), 36-month warranty extension and service included. Hsdpfjg Rd Nasx Aabsnu

Year of construction: 2019, operating hours: 5,353 h, condition: used, Drivetrain Drive: Track Make of engine: Deutz Weights Empty weight: 36.300 kg Functional Dimensions of cargo space: 18600 x 3200 x 3400 cm CE mark: yes Condition General condition: good Technical condition: good Visual appearance: good Identification Serial number: K0860165 Hnsdpoxcp Tcofx Aabju Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Production country: DE Additional information Please contact Jeroen Rijk, Dennis van Loon or Antoon Schroder for more information

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 4,830 h, load capacity: 1,800 kg, lifting height: 4,625 mm, free lift: 1,524 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Hjdjxlltqepfx Aabjnu Transmission: Double pedal Condition: Refurbished, without warranty Technical condition: Good Front tire type: Non-marking Front tire size: 200/50-10 Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire size: 140/55-9 Rear tire condition: 60 - 80% Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: Midac Battery type: PzS Battery year of manufacture: 2016 Battery condition: 60 - 80% Description: Handover with new FEM 4004 inspection including inspection book. For further questions, feel free to call us. In addition to this model, we have approx. 150 other industrial trucks in stock. Visit our website, fleischmann-foerdertechnik. We are happy to arrange leasing & financing as well as delivery at attractive conditions. Trade-in of Linde equipment is also possible—even if you do not purchase a machine from us. Operating hours stated were recorded at the time of listing. Subject to prior sale, changes, and errors. Sideshift, Hydraulic sideshift pre-installed, 4th valve to carriage 3rd valve, 4th valve, rear working light, front working light, half cab, full free lift, safety light, seat heating,

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm table height mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions m SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Hedpfx Aaefg E Hysbsnu Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: good (used), Year of construction: 2019, operating hours: 5,380 h, Drivetrain Make of engine: DC13 71A Weights Empty weight: 47.280 kg Hedpfx Ajxcp S Eoabonu Functional Dimensions of cargo space: 17340 x 3000 x 3600 cm CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: K0180224 Other information Delivery terms: EXW Production country: DE Additional information Please contact Jeroen Rijk, Dennis van Loon or Antoon Schroder for more information

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,233 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Double pedal Condition: Refurbished without warranty Technical condition: Good Front tire type: Non-marking Front tire size: 18x7-8 Hnodexlltkspfx Aabju Front tire condition: New Rear tire type: Non-marking Rear tire size: 140/55-9 Rear tire condition: New Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: GBD Battery type: PzS Battery year: 2019 Battery condition: 60 - 80% Description: Delivery with new FEM 4.004 inspection including inspection booklet Side shifter, Integrated side shifter, 4th valve to fork carriage 3rd valve, 4th valve, rear work light, front work light, half cab, full free lift, safety light, non-marking tires, seat heating, LED, Linde Safety Pilot active, front & rear camera, comfort PVC seat with seat heating,

Condition: new, cutting diameter 280 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 330 mm Control NC capacity 90 degrees: flat 330x 260 mm Hedpfsfg E H Dsx Aabsnu capacity 90 degrees: square 260 x 260 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,24 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Attention: special price!!! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t dimensions of the machine ca. m MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Hedpfx Asfg E H Ieabsnu Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Hnodpfx Aaefm T Hbsbju Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Hsdefg E Hzspfx Aabenu Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material Hnjdpsfg Rlbofx Aabju •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side •Turntable with additional central axis