Used Shredders for sale (962)

Condition: new, Year of construction: 2025, operating hours: 1 h, Hackschnitzel oder Holzspänen produzieren mit PYTHON-G. Der Nachzerkleinerer Python-G wird in Kombination mit dem PYTHON betrieben. 2-Stufen Zerkleinerung. Die Endfraktion des Vorbrechers PYTHON wird direkt in den Materialeinlauf der Nachzerkleinerer PYTHON-G geführt. Die Maschinen werden dann in L-Form angeordnet • Antrieb mit Motorreduktor 15 kW, 400V, 3phs, 50Hz • Rotor Durchmesser ca 350mm x 1200mm • Rotormesser 40x40mm concave Rcsdpfx Ajibnd Ejnyof • Anzahl Messer ca 25 ( optional 50 Stk.) • Haubtabmessungen L 2100 x B 850 x H 1000mm • Sieb B 450mm x L 1200mm ( Fläche 0,85m2 ) • Siebloch Grösze nach Wahl ( 25mm/30mm/40mm/50mm ) • Gewicht ca. 1350 kg • "Made in Holland"

Condition: good (used), Year of construction: 2011, functionality: fully functional, overall weight: 30,000 kg, power: 250 kW (339.91 HP), input voltage: 400 V, Stationary shredder LINDNER Jupiter 2200. Redpfx Asuv Htuenyjcf Electric drive: 250 kW Including switch cabinet and hydraulic unit.

Year of construction: 2026, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Rcodpodubpuefx Anyef Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. dimensions approx. Length: 104cm Width: 22cm Height: 28 cm (at the motor) *Without controller Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. ----- Optional at extra charge: Cross and ascending belt demonstrators from € 7,995 net

Condition: good (used), Plummer block housings, bearing blocks for shredders, crushers, water mills, chippers, cutting mills, granulators, and cutting granulators -Quantity: 1 piece heavy-duty steel pillow block housing -Type: Bearing block, inner diameter: 320 mm Rsdpfodaa Husx Anyecf -Axis/Center of housing: 190 mm -with: shaft seal discs -Quantity: 1x bearing block available -Suitable for: Bearing abbreviations 22236/22330/23064/23138/23236, not included in the scope of delivery -Suitable for: Bearing abbreviations 22236K/22330K/23064K/23138K/23236K, not included in the scope of delivery -Dimensions: 560/190/H395 mm -Weight: 228 kg

Condition: new, - 1 discharge power 5,5 (7,5) kW (PS) throughput approx. ……………. 800 kg/h electric outlet 400V 50Hz (3 phases) Rsdpfx Aob Nvr Ienyscf fuse 20 A dimensions: length 725 mm width 690 mm height 1 520 mm weight 70 kg material 1.4301 / AISI 304 discharge height 475 mm Scope of supply - installed..... screen 5 mm Scope of supply - included in delivery..... 3 / 8 / 12 mm incl. pouring ring

Condition: ready for operation (used), Year of construction: 2007, power: 55 kW (74.78 HP), Fully functional single-shaft wood shredder - currently in operation in our factory. Including electrical control system (PLC), switch cabinet (Rittal/Sarell), anti-vibration foundation and enlarged hopper. Technical data Rotor working length: 1,500 mm Rotor diameter: 485 mm Motor: 55 KW Rotor speed: 100 RPM Redpfxora Ex Ej Anyecf Rotor knives: 76 pieces concave / 35x35 mm 4-fold rotating cutting crowns Screen size: 60 mm (new) Weight: approx. 9,000 kg Further details on request. Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Rjdjra N A Njpfx Anyocf Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: used, Year of construction: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3000 Maximum panel height mm 60 PVC-ABS edge thickness mm 3 Feed speed mt/min 40 Feed speed with rounders mt/min 20 Motorized pressure rubber belt Bearing track with retractable pin (distance between pins mm 500) Squaring part composed of: Anti-adhesive group Timed automatic anti-splinter group Double shredder group Free space for any group addition Gluing unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit FK rounding unit Rcsdpfx Aspp Tkfenyof Edge scraper unit Glue scraper group Brush group Anti-adhesive group

Condition: new, functionality: fully functional, The Brugger PX130 wood chipper is operated via the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 13 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed - Diameter up to 13cm - Weight 420kg Rcjdpsrblwdjfx Anyof - PTO speed: 540 rpm - Horsepower tractor: 30-70 hp

Condition: used, Year of construction: 1995, machine/vehicle number: IDC000049, Vecoplan VZ 60/34 V shredder For shredding wood waste and other products. Rcjdpfx Asrdykvonyef Inlet width 600 mm; Inlet height 340 mm; Number of cutting plates 28; Cutting inserts 40 x 40 mm; Rotor speed approx. 450 rpm; Chip or shredded product size approx. 30 mm; Capacity 2 m3/hour; Input rotor motor power 11 kW

Condition: used, Year of construction: 2018, functionality: fully functional, Vertical chain shredder / Querstromzerspanner QZ / Kettenmühle 37 KW Suitable for shredding turnings, plastics, PCB, turnings, biomass and many more. Easiliy adjustable grain size Redpfx Anjrrhcpoyocf Very efficient machine, with just the chain as a shredding tool. Ready to work. Equipped with electric cabinet and synchronizable feeding conveyor.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overworked machine 37 kW Rcjdpfxjtxykfo Anyof Feed opening: 1200 x 1200 mm Rotor length: 1300 mm Rotor diameter: 348 mm Rotor for soft Wood Screen size: 20/25mm Tools: 60 knives: 35x35mm caro and 35x35mm concav Controlled by PLC Hydraulic tank size: 20 l fast hydraulic backwards Conveyor belt sector 400mm Second row of knives

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rotor width 2500 mm Rotor diameter approx. 400 mm Rcodpfx Aetgqlyjnyjf Motor 75 kw Discharge via conveyor belt with magnetic roller

Condition: excellent (used), EPS CRUSHER / SHREDDER / GRINDER – GRINDER N. 1 For sale: a professional, high-efficiency EPS (expanded polystyrene) shredder/grinder, designed for continuous operation within a technological production line. Unlike standalone machines that require manual feeding or separate conveyor loading, this unit is specifically engineered for installation directly underneath an EPS cutting line. It automatically collects, crushes, and reduces the volume of both side and bottom waste material as it falls onto the conveyor belt during the cutting process. Rcjdpfx Aszc Hnlonyof PRICE: Original Price: 6,500 EUR New Price: 5,900 EUR Technical Specifications: External Dimensions (L x W x H): 191 x 120 x 64cm Inlet Dimensions: 148 x 38cm Drive System: Heavy-duty 7.5 kW gear motor (motoreducer) Shaft Configuration: Dual-shaft drive via heavy-duty gears (both shafts are actively driven) Tags: EPS shredder, polystyrene crusher, EPS grinder, recycling equipment, volume reducer, styrofoam shredder, compactor, waste processor.

Year of construction: 2015, operating hours: 13,275 h, condition: used, functionality: fully functional, rotor diameter: 800 mm, We are offering this used ZENO ZTLL 1600x1800 shredder for hollow bodies, pallets, etc., year of manufacture 2015. This unit is very well suited for processing hollow bodies, PE waste bins, PP + PE crates, PP KLTs, and PO pallets. 1.1 m³ waste bins can be fed and shredded in one piece. The throughput for these fractions is 1,500 kg per hour. Other hard plastics such as ABS, PS, PMMA, and ABS-chromed materials can also be processed very efficiently. For these, the throughput rate is 2,000 kg per hour. Type: ZTLL 1600x1800 Machine number: 15A-6191 Year of manufacture: 2015 Weight: 12,000 kg Rcjdpfxoy Efgms Anyef Main drive power: 90 kW Main motor current: 161 A Main motor voltage: 400/690 V Main motor speed: 1,450 rpm The main motor is equipped with forced ventilation. The motor was replaced with a new one in November 2023. Rotor speed: 80 - 140 rpm The rotor is equipped with 145 cutting crowns, each measuring 40 mm x 40 mm. The original rotor has been replaced. Hydraulic drive power: 5.5/1.1 kW Hydraulic motor current: 11/2.6 A Hydraulic motor voltage: 400/690 V Hydraulic motor speed: 1,500 rpm The unit is ready for immediate operation after installation. The floor of the unit is uneven. The unit is stored in 34431 Marsberg-Westheim, near the A44. We replaced the unit to further increase the throughput capacity of our facility. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Power 15 KW Technical specification:Hopper opening: 600 x 800 mmHopper capacity: 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 260 mmDrive power: 15 kWRotor speed: 90 rpm.Number of knives: 14 pieces 2 piecesType and size of knives: concave / 40 x 40 mm, reversible cutting crownsconcave / 30 x 30 mm, broaching knivesScreen perforation: 15/20 mmPaint finish: frame in RAL 5010, hopper in RAL 7016(HoKuTech standard paint finish)Connected load: 400 V /- 5 % / 50 Hzincluded:Switch cabinet (Rittal) with 5 m cableElectrical control (PLC Siemens)Star-delta startRubber oscillating elementsE-rotor with knife pockets milled into the profileGear limit switch1. Knife rowHold-down device on pusher for long and large partsLarge 40 x 40 mm knives for optimum material feedVery robust gearboxSpecial broaching knives to prevent lateral jammingMachine number: 510-5238 Redpfx Asvwfhcenyocf

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER MODEL ST-75ES MANUFACUTRED 2015 Rcodpfx Aexmthrjnyef TWIN 40 HP MOTORS DUTTING CHAMBER OF 956mm/37" X 635mm/25" DISCHARGE HEIGHT 1,067mm/42" THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE.

Condition: good (used), Chipper Klockner 120x400 L2 / 1W - German production - DTR Redpfx Anohfmuroyscf TECHNICAL SPECIFICATIONS: width 400 mm height 120 mm rotor diameter 430 mm rotor length 430 mm two knives sieve 60 x 60 mm engine power 37 kW engine power 2 x 2.2 kW two lower toothed shafts top toothed shaft feeder length 4900 mm chute the wood chips with a sieve transport dimensions (length / width / height) 850/245/220 cm weight ~ 2500 kg

Condition: new, Year of construction: 2025, Overband Magnetic Separator – Type DMPM 2000 | Industrial Version Manufacturer: die magnetprofis GmbH & Co. KG Model: DMPM 2000 Condition: New / unused Availability: Immediately ex stock ⸻ Technical Description: The DMPM 2000 overband magnetic separator is engineered for the reliable and continuous removal of ferromagnetic contaminants from product streams. It is ideally suited for use in recycling plants, bulk material processing, crushing plants, conveyor lines, and material processing facilities. ✅ Key Features: • Design: Cross-belt discharge with motor & discharge belt • Magnet type: Permanent magnet (maintenance-free) • Belt width: 650 mm • Magnet length: approx. 2000 mm • Support structure: Robust welded steel construction • Drive: Electric motor with low-maintenance gearbox • Ready to operate: Pre-assembled, ready for operation, incl. lifting lugs • Options: Control unit in the form of a frequency converter, gallows for suspension ⸻ Fields of Application: • Recycling industry (metal, wood, construction debris, etc.) • Conveyor systems in the cement, energy, or waste sectors • Protection of downstream machinery (e.g., shredders, crushers, mills) • Food industry (optionally available in stainless steel version) ⸻ Scope of Delivery: • Overband magnetic separator DMPM 2000 (new unit) • Conveyor belt with drive unit • Suspension system (chains as required) • Documentation (operating manual, CE conformity) • Optional: Control – frequency converter Rcedpfx Anjwx H E Djyjf Our core competence is delivering exactly what our customers truly need. Together with our customers, we develop tailored, application-specific solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, grid magnets, metal separator, block magnet, filtration systems

Condition: good (used), Year of construction: 2023, functionality: fully functional, Cushion Pack CP 428 S2i/6 packaging cushioning machine (cardboard shredder) in fully functional condition: Year of manufacture: 2023 Power: 3 kW Cushion width: up to 420 mm Infeed height: 20 mm Shipping via a freight forwarder is possible after consultation. Rjdpfx Aezpwnzjnyocf #8552-1

Condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator -Condition: unused, without controls -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Quantity: 3 pieces available Rcjdszbk Tispfx Anyof -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg

Condition: like new (used), Year of construction: 2014, functionality: fully functional, shredder SG - 500/200 - the shredder is completely overhauled and ready for operation - the shredder is also equipped with a vibrating conveyor 8 m long with a separation where sawdust is separated and equipped with a magnet with metal detection in the attachment you will find technical parameters for the machine ¨ Rjdswhw Iuepfx Anyecf - electrical switchboard for the machine

Year of construction: 2025, condition: like new (used), Replacement shafts for Lindner Urraco 75 for sale High-quality replacement shafts for a Lindner Urraco 75 shredder are for sale. Rsdpfszphiiox Anyscf – Application: Old wood, household and commercial waste – Condition: New / very good condition Design: Original Lindner shafts, not replica shafts The shafts are ready for immediate use. The price stated is net. Notes: • Sale is made excluding any warranty or guarantee. • No returns or renegotiations. • Subject to prior sale. All information is without guarantee. The seller assumes no liability for any errors, omissions, or changes to the information. The sale is made exclusively subject to prior sale.

Condition: like new (used), Year of construction: 2021, operating hours: 967 h, functionality: fully functional, machine/vehicle number: 90135010410, total length: 4,300 mm, total width: 2,070 mm, total height: 3,040 mm, overall weight: 9,000 kg, hopper volume: 3,000 l, rotational speed (max.): 10 rpm, blade width: 40 mm, torque: 40,000 Nm, power: 88 kW (119.65 HP), rotor width: 900 mm, input voltage: 400 V, type of input current: three-phase, control cabinet width: 300 mm, control cabinet length: 900 mm, control cabinet height: 900 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, Schomberg twin-shaft rotary shear ES 90/135-D with base frame, hopper and Siemens S7 1212C control cabinet. Powerful 88 kW metal shredder for scrap processing, plastics recycling, or waste treatment. Rcodpsw E H Npefx Anyjf

Condition: like new (used), Year of construction: 2023, operating hours: 111 h, functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 4,000 kg, The PS1600 was designed for shredding pallets into high-quality wood chips. - Recycling of pallets into high-quality wood chips - Significant space saving by eliminating the need for disposal sites - No disposal costs - Simple and safe operation Details Technical data Machine type: PS1600 Operating hours: 111 h Year of manufacture: 03/2023 Cutting unit opening: 284 x 1,588 mm Drive description: Belt drive with a 2-stage gearbox and elastomer damper Drive power: 22 kW Rotor speed: 53 rpm Energy efficiency class: IE3 Voltage / frequency: 400 V / 50 Hz Cutting system: Rotor Feed table with infeed belt and infeed roller Speed control of the infeed rollers Design: Smooth Rotor diameter: 300 mm Number of knife rows: 1 Number of cutting tools: 43 Perforated screen: 70 x 40 mm with chip breaker Color / paint Machine: Gray Covers: Gold yellow Control cabinet Control: Siemens LOGO control Color: Light gray Rcjdpezntu Ujfx Anyef Dimensions and weight Machine dimensions: l x w x h 4660 x 2320 x 2030 mm Total weight: 4 t Accessories Discharge screw: 3000 mm Trough chain conveyor 45°: 4000 mm Downpipe: 1000 mm Light barrier in the chip area OPTIONAL on request: Magnetic separator