Used Shredding for sale (834)

Condition: used, Catalogue No.: 7536 – German-made – No engine – Used chipper TECHNICAL DATA Feed opening width: 530 mm Number of knives: 2 pcs Shaft diameter: 580 mm Feed opening width: 420 mm Feed opening height: 200 mm Net price: 30,000 PLN Net price: 7,140 EUR (at 4.2 EUR rate) (Prices may change with significant fluctuations) Njdpfjzwwy Hox Ab Ujwl

Condition: excellent (used), CATALOG NUMBER 7069 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 150mm - Shaft width: 450mm - Shaft diameter: 550mm - Number of knives: 2 pcs - 3 toothed feed rollers from the top and bottom, 2×2.2kW - Electric auto-reverse - Reverse mode - Belt conveyor - Conveyor length: 5100mm - Feed belt width: 400mm - Main motor: 30kW - Chipper dimensions (L/W/H): 2600x1500x1530mm - Overall conveyor dimensions (L/W/H): 5200x560x910mm Nwodpfx Aezruu Dob Uel - Weight approx.: 3000kg – with belt conveyor – electric auto-reverse (adjustable) – reverse mode – used chipper, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 1994, Mawera RZM 200 Main motor: 22 kW with electronic soft start Automatic idling shutdown Hydraulics: 1.0/1.4 kW, reversible Hopper opening: 844 x 1000 mm All-steel pipe: 270 mm Ø Rotor speed: 135 rpm Nwsdpfx Ajy T Ih Neb Uol Chopping teeth: 30 pieces, replaceable Chopping capacity: 500-850 kg/h Extraction: 30-35 m/s Weight: 2100 kg (without control cabinet) Control cabinet: with PLC microprocessor control 30 pieces, replaceable 500-850 kg/h with PLC microprocessor control Operating hours: only 2562 Difference between RMO and RZM: The RMO is an older model, a classic found on the used market. The RZM 200 is its modern evolution – more robustly built, intelligently controlled, easier to maintain, and more efficient when processing modern wood waste and pallets.

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Nwsdpozhg Eyjfx Ab Usl Control cabinet brand new (original from THM recycling solutions GmbH) Hydr. feed pressure device (HNDE), feed hopper, Available from approximately the end of August.

Condition: used, Year of construction: 2021, operating hours: 4,119 h, functionality: fully functional, machine/vehicle number: 7187, overall weight: 20,000 kg, year of last overhaul: 2026, fuel type: diesel, We are offering this used Lindner crusher, model Urraco 75D, manufactured in 2020, for sale. The installed grinding unit has been completely refurbished. An additional grinding unit (unrefurbished) is included in the price. Nsdpfszc Izmsx Ab Uswl If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 506 h, functionality: fully functional, machine/vehicle number: 42, conveyor belt length: 6,900 mm, conveyor belt speed: 4,000 mm/s, conveyor belt width: 1,000 mm, Doppstadt Methor with only approx. 500 operating hours and extensive additional equipment! TECHNICAL DETAILS Shredding System Type: Size L Number of roller teeth: 8 Feed Hopper Loading height: 3,124 mm Rear Discharge Conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: 1 – 4 m/s MACHINE DETAILS Chassis: Crawler track undercarriage Working position (L x W x H): 11,293 x 2,545 x 4,184 mm Transport dimensions (L x W x H): 7,820 x 2,545 x 3,231 mm Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 HP) Emission standard: Stage V Fuel tank capacity: 300 l EQUIPMENT Methor basic package with crawler undercarriage Crawler undercarriage incl. 2 travel speeds Track width 400 mm, 3-bar Additional hydraulic connection 70 l/min 24 V electronic control system Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Frame for overbelt magnet Overbelt magnet Quick-change roller system on the roller Quick-change roller system on the machine Additional E-pump for operation when engine is shut down Njdpfsxrn Hgex Ab Ujwl

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, overall weight: 30,000 kg, rotor length: 3,000 mm, power: 375.1 kW (509.99 HP), Crawler-mounted crushing plant, Neuenhauser TARGO 3000. Equipment, detailed description: see documents. Nsdpfxjzd Srde Ab Uowl

Condition: used, Technical specifications: Njdpfx Ajzkh Inob Uewl For shredding wooden waste Shaft width: 500 mm Shaft diameter: 300 mm Screen diameter: 15 Safety switch Power supply: 400 V Motor power: 7.5 kW Overall dimensions: Length: 2500 mm Width: 1100 mm Height: 2300 mm

Condition: like new (used), Year of construction: 2014, functionality: fully functional, crusher SG - 500/200 - the crusher is completely overhauled and ready for operation - the crusher is also equipped with a vibrating conveyor 8 m long with a separation where sawdust is separated and equipped with a magnet with metal detection in the attachment you will find technical parameters for the machine ¨ Nodpfx Aswhw Iuob Ujwl - electrical switchboard for the machine.

Condition: used, Year of construction: 2015, operating hours: 6,877 h, functionality: fully functional, overall weight: 25,000 kg, We offer this used Doppstadt Buffalo DW-3060 Type D with HS-401 return system for sale: Nodpfx Aezavxzeb Uswl Operating permit no.: e13*2007/46*1470 Vehicle identification no.: W09306325F2D38792 Permissible total weight: 25000 kg Permissible axle load 1: 8000 kg Permissible axle load 2: 8000 kg Permissible axle load 3: 8000 kg Permissible support load: 1000 kg Type: DW3060 Type D Year of manufacture: 01/15 Serial number: 792 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2017, operating hours: 6,886 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Njdpfoxx Tfzox Ab Uowl Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: excellent (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, We brought this back in 2023 for a specific project that never came off so it is nearly new. We are looking to sell the shredder, WME infloor conveyor, and Helios fire system all together, new price was £440k for all 3. Our Presona LP100 cannot keep up with it but the most we have processed is 13 tons per hour, screened to 40mm secure paper destruction. It is still in place and runnning. Nedpfx Abjxftitj Uewl Buyer to decommision and collect. This is also advertised elsewhere so we reserve the right to take it down at any time as trade sellers are also advertising and selling the machine

Condition: repair required (used), functionality: limited functionality, Year of construction: 2001, Installation for crushing waste from construction site bins and demolition concrete, manufactured by DBT. The technical specifications are presented in the attached documents. This machine will be sent to the workshop for a major overhaul of the jaw crusher drive system. The electric motors and gearboxes will be inspected. The unit will be disassembled and sandblasted before applying a rust-proof coating, followed by a two-layer varnish. CE marking will be applied. Nwsdezxh N Ujpfx Ab Usl

Condition: excellent (used), For sale: a Rapid 1514 shredding mill from the Range 15 series. The machine has been inspected and is in working order. It is suitable for shredding appropriately selected materials, including plastic waste. The unit features a feed hopper, a cutting chamber with blades, an electric motor, and a control panel with an emergency stop switch. The photos also show the interior of the working chamber. Data from the nameplate: - Manufacturer: Maskin AB Rapid, Sweden - Type: 1514 Nwedsz Ezuuspfx Ab Uel - Series: Range 15 - Year of manufacture: 1994 - Machine number: 260319 The machine is used and shows signs of wear, which can be seen in the photos. The condition and scope of equipment are shown in the photographs.

Condition: repair required (used), Year of construction: 2014, functionality: not functional, machine/vehicle number: OP-2013-019*002, total length: 2,730 mm, total height: 3,192 mm, overall weight: 3,100 kg, total width: 1,752 mm, This is a two-rotor, slow-speed shredder from the manufacturer Automatica s.r.o., equipped with a new electric motor and a Nord gearbox. Unfortunately, the machine has a rotor shaft defect, but it is repairable. It includes new stator and rotor blades. New electrical wiring, including a switchboard. Nwodjzgf R Sspfx Ab Ujl Control via PLC, see photo. The shredder is designed for shredding wood, plastic, cardboard, etc.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 34, fuel tank capacity: 300 l, conveyor belt length: 6,900 mm, Only 200 operating hours! TECHNICAL DETAILS Undercarriage track: 400 mm with 3 grousers Rear belt: 6.9 m Shredding system: Size L (8 teeth) MACHINE DETAILS Additional hydraulic connection: 70 l/min Engine: Cat C7.1, 205 kW Fuel tank: 300 L Permissible total weight: 16,300 kg EQUIPMENT 24 V electrical control system Large radio remote control, complete Njdpfezcd Aajx Ab Uswl Easy-to-maintain engine compartment with LED light Folding hopper with distance sensor and automatic control Hydraulically reversible fan wheel Audible start-up warning Tracked undercarriage with 2 travel speeds Frame for overband magnet Rubber quick-change pads Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Watering system LED work lights Additional electric pump for operation when the engine is stopped

Condition: excellent (used), Weima WL6 wood chipper 18.5kW engine rotor length 800mm, Njdpfxszkqnqs Ab Uewl 21 knives on the rotor, hydraulic hopper, automatic reverse function 15mm screen at the bottom and 20mm screen at the top Machine has undergone inspection, in very good condition Weight approximately 1500kg

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW Nwsdpfx Absztqt Ss Uel - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2024, operating hours: 30 h, total height: 5,380 mm, total width: 4,170 mm, total length: 5,250 mm, RECU UZ 2000 Universal Shredder in open design. Manufacturer: Recuperma Model: RECU UZ 20000 Particularly suitable for gentle and rapid composite material breakdown. Disintegration, separation of composite materials, and volume reduction. Operating principle: - Use of flexible impact elements Nwjdpfxjv U Ttbo Ab Uel - Size reduction through impact effect of the input material - Crushing to various particle sizes Throughput: Hourly capacity depends on the particle size and bulk density of the material to be processed. Technical data (+/- 5%): Drive power: 250 kW approx. 1490 rpm Drive type: belt drive Auxiliary drive: hydraulic unit approx. 1.5 kW Control: SIEMENS Frequency converter: SEW brand Drum diameter: 1900 mm Weight: 25 tons Wear plate lining HB450 Material loading via hopper Chain curtain as protection against ejection of parts Material discharge via sliding door Currently, the machine is defective. The price refers to the repaired machine. Unrepaired price: €370,000. Transport not included.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Njdpfx Absy D I I Rs Uewl Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: as good as new (ex-display), Year of construction: 2026, Shredding machine ZM 1 with a cutting chamber of 360x380 mm and a 7.5 kW drive. Blade configuration: 14 mm, 3 hooks. Complete with hopper, base frame, and control system with a Siemens PLC, including overload protection and reversing function. Nwedjiwggxspfx Ab Ujl

Condition: refurbished (used), Year of construction: 2005, operating hours: 6,159 h, Doppstadt DW 2560 Buffalo - Year of construction 2005 - Operating hours 6149 - Engine Mercedes Benz 354PS - Roller : 17 teeth - Overband magnet - Remote control Nodez Dcb Hepfx Ab Uewl - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Condition: excellent (used), Year of construction: 2020, operating hours: 1,743 h, functionality: fully functional, power: 257 kW (349.42 HP), Mobile shredder LINDNER URRACO 75. Foldable discharge conveyor, overband magnet, radio remote control. Service new in February 2026. Nodpfx Aboydmgdo Uewl

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Rotor flight circle: 745 mm Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Upper scraper combs: 6 Hydraulic feed: 11 kW Total weight: approx. 33 t Nwjdov S Hyvepfx Ab Uol Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge belts available as an option.

Condition: excellent (used), CATALOGUE NUMBER 7240 Nsdpfxezruhqj Ab Uewl TECHNICAL DATA - inlet width 400mm - inlet height 210mm - shaft width 530mm - shaft diameter 500mm - blade length 530mm - number of blades 2 pcs - screen dimensions 55x50mm - 2 geared pull shafts from below - motor for lower shafts approx. 3kW - geared pull shaft from above - motor for upper shaft 1.5kW - feeder belt length 4600mm - feeder belt width 400mm - main motor 55kW - auto-reverse - feeder dimensions (L/W/H) 4630x620x760mm - machine dimensions (L/W/H) 2510x1700x1200mm - weight approx. 3500kg - German production - auto-reverse (adjustable) - used shredder, very good condition Net price: 85900 PLN Net price: 19977 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)