Used Wrap for sale (866)

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Bledsu Tg I Djpfx Abcec Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: good (used), Banding machine Willy Heckmann WHU 200E The machine is like new, ready to work. Manufacturer: Willy Heckmann GmbH & Co. Simple controls. An indispensable device on expeditions, for packing heavy parcels, e.g. with leaflets or catalogues. A strip of PP tape strengthens the packaging and additionally creates a handle that allows us to easily grab and transport the package. Adjustable tension force. Goal size 850x600mm Strap width 12mm Power supply 230V Weight 200 kg Ask About The P Bjdpfx Aeya Iubebcolc

Condition: used, machine/vehicle number: 16011, automatische Folieneinschlagmaschine - Wrapping & Shrinking Machines CMC FA-600 BT Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Bjdsh Axp Nepfx Abcolc On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1991, Folieneinschlagmaschine für pharmasichere Einzel- und Sammelgebinde - Film Wrapping Machine for pharma single and multipacks Pester PEWO-foldYear 1991 - Serial-No. N-261 Maschinen Abmessungen: 2950 x 1450 x 2100 mm [L x B x H] Ausstattung: K-Stapler Min. Formatbereich: Faltschachtel 30 x 15 x 60 mm [a x b x h] Gebinde 60 x 30 x 60 mm [L x B x H] Max. Formatbereich: Faltschachtel 150 x 80 x 250 mm [a x b x h] Gebinde 250 x 250 x 140 mm [L x B x H] Leistung: bis zu 60 Gebinde/ Min. Steuerung: Schneider Electric PacDrive 3 / Rockwell Automation (Allen-Bradley) Bljdeh Axgnepfx Abcjc Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1995, machine/vehicle number: 9503264, Palettenstretchmaschine - Pallet Wrapping Machine W&W EFA5 1450Year 1995 - Serial-No. 9503264-943-3144 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Bjdpfjh Axr Djx Abcslc Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1993, machine/vehicle number: 931200665, Verpackungssystem - Wrapping & Shrinking Machines BVM SM4012 K-SC4030SYear 1993 - Serial-No. 931200665 Full automatic packaging SM 4012K Einlaufbreite max. 420mm / Infeed width max. 420mm Shrink tunnel SC4030S Format (Breite x Höhe) / Size (width x high) 450mm x 330mm 5m Chain gripper feeder Delivery band GUK Feeder for single sheets Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Bodpfxsh Ax Hfe Abcslc

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2 h, functionality: fully functional, machine/vehicle number: LM 500 W6-P, Due to lack of use, a Plasmek Plastic Makinalari LM500 W6-P laminating machine is for sale. The machine has virtually 0 operating hours and has not been used. All parts and accessories are included. Special offer: now only €39,500. Bsdjw H Rpvopfx Abcjlc

Condition: used, Year of construction: 2007, Shrink wrapping machine BVM BMS 6030 W Year: 2007 Blsdpfxoygwdfo Abcoc With shrink tunnel

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 8868, Technical characteristics: Work Area # Table diameter: 1.2 m # Manual and automatic mode: available # Maximum height: 2.20 m # Adjustable speed and tension. # Maximum load: 1500 kg Blodpfxoyanixs Abcjc Electrical Equipment # Operating voltage: 230 V / 10A Machine status: WORKING

Condition: used, Year of construction: 2007, Overview This wrap-around cardboard packer was built in 2007 by Italian manufacturer Ocme. The machine was installed in a non-returnable glass bottling line. The whole line was dismantled and sold as single machines. The WA packer is properly dismantled and stored. Techn. Details Capacity: up to 60 packs per minute Recently packed: 3x4 cardboard 4x6 cardboard 0,5 L glass bottles 0,33 L glass bottles Other formats possible Bodpfjtq Dzhex Abcelc

Condition: used, Year of construction: 2006, Overview  This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  Capacity: 30,000 bottles/h (0.33 L, 6-packs) Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm Formation of packs: 2×3 (six-pack wraparound) Operating hours: 1,677 Construction: Full stainless steel Glue type: Hotmelt Scope of Delivery  Wraparound packer | Krones | Solidpac | 2006 Infeed conveyors for bottle supply and dividing system   Bledjw T Sthepfx Abcsc

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: HOP20170043, total width: 1,490 mm, total length: 820 mm, total height: 1,345 mm, Industrial double-chamber vacuum packaging machine designed for fast and efficient packing of food and non-food products in commercial settings. The machine is in excellent condition and ready for immediate use. It offers MAP (Modified Atmosphere Packaging) capability, which was its primary function for us—packing dried fruit in MAP packaging. Any product can be vacuum packed or MAP packed in MAP pouches. There is no shrink tank included. Pump capacity is 63 m³/h (Busch). Bljdpfx Ajyf A E Ejbcoc

Condition: used, Fully automatic packaging machine for products such as cans, glass bottles, and plastic bottles in shrink film, where the final output is multi-pack bundles with a defined number of products. The machine features robust Italian construction, high reliability, and quick format changeover for various product dimensions. Manufacturer: ZVT Model: PSP 032 S Maximum output: 30 cycles/min (two lanes) Output for 1.5 L bottles: up to 21,000 bph (multipacks 2x3) Bsdpfsxpn Edox Abcjlc Output for 0.5 L bottles: up to 43,000 bph (multipacks 4x3) Electrical power: 94 kW Air consumption: 7 l/min/cycle Dimensions: Installation length approx. 10,000 mm, width approx. 1,700 mm, height: 2,000 mm. Complete and original technical documentation. Technical condition: used machine

Year of construction: 2016, condition: excellent (used), Böhl - wrapping machine type JUNIOR/S-450 VA Bodpslcc U Esfx Abcjlc Product dimensions: Length: 600/800mm maximum 5800mm Width: 15mm maximum 220mm Height : 15 mm maximum 120 mm Maximum weight 30 kg/metre The maximum cross-section diagonal of the previous customer was 220 mm. The specified weights are only possible with a driven on-site roller conveyor. Technical specifications: Electrical control: Siemens S7 with TP Control voltage: 24V DC Operating voltage: 3 x 400 V/50 Hz, N, PE Pneumatics: FESTO Compressed air: 6 bar dried, cleaned and oil-free Air consumption: about 20 NL cycle Maximum feed pressure: 8 bar Noise emission value: less than 80 db/A Machine compare layout Operating side: on the right in the conveying direction Control cabinet: on the left fixed to the machine Varnish machine 7032, gray black-yellow Runway height: 900mm

Condition: used, Year of construction: 2011, Elopak's E-PS120UC is a carton packaging solution commonly used for beverages. Here are some key features and benefits: - Sustainable Packaging: Elopak focuses on sustainability, and their products often feature renewable resources and recyclability. - Functionality: The E-PS120UC is designed for easy pouring, which is essential for consumer convenience. - Preservation of Quality: This type of packaging helps to extend the shelf life of beverages, ensuring that the taste and quality are maintained. - Versatility: It can be used for a wide range of products, including juices, milk, and other liquid foods. - Customization Options: Elopak typically offers branding and design options for their cartons, allowing businesses to create a unique product presentation. Elopak® E-PS120UC Bjdpfx Abjyccuzscjlc Please also check the pictures there is one of the red label which also states the machine serial number, Meurer CM/TP 25-B 400 Wrap-Around Packing Machine - Filling Volume: 250 ml to 1136 ml Capacity: 12,000 b/h Condition: Excellent Available: Immediately Location: Central Europe Visit: Possible upon Request

Condition: repair required (used), Year of construction: 2005, functionality: not functional, Automatic stretch wrap machine for loads placed on pallets. Machine requires repair! Bledpfx Ajxfbfvebcoc Missing one stretch film carriage, ASI communication not functioning, and control cabinet incomplete. Original machine documentation and electrical schematics included. Manufacturer: M.J. MAILLIS GROUP (SIAT) Model: MANCON 1710 Year of manufacture: 2005

Condition: used, Year of construction: 2004, Back Coating Line Laminating Machine FRIZ, type Profi FBS 130, year 2004 Bjdpfx Asyay Rusbcolc

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, The machine is fully operational. CMC PRATICA poly foil wrapping machine. Year 2009 and not used that much by its former owner. Bledpfjxlgp Tex Abcec

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm Bljdju Nu Hispfx Abcec total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: new, Year of construction: 2025, Pallet Wrapping Machine for 1200x1000 mm Pallets – 2000 kg Capacity The pallet wrapping machine for 1200x1000 mm pallets with a load capacity of 2000 kg is a universal and cost-effective solution for companies looking to increase the efficiency of their packaging processes. This device combines high build quality, ease of use, and operational safety. It performs excellently across various industries – from food processing and manufacturing to logistics and e-commerce. 1650 mm Turntable Wrapper – Designed for Industrial Pallets and Heavy Loads Thanks to its 1650 mm turntable diameter, the wrapper is suitable for larger industrial pallets (1200x1000 mm) and non-standard loads with a wider base. It is ideal for use in: Manufacturing plants and heavy industry Shipping and transportation companies Logistics centers and wholesale operations Food, chemical, and metal industries High-bay warehouses With a high load capacity of 2000 kg, the machine can handle both lightweight carton pallets and heavy goods placed in crates, barrels, or industrial containers. Key Advantages of the 1200x1000 mm Pallet Wrapper ✅ High Load Capacity – up to 2000 kg Allows wrapping of heavy loads without the risk of damaging the turntable. ✅ 1650 mm Turntable Diameter Ideal for larger industrial pallets and wide-based loads. ✅ Versatile Use Compatible with EURO pallets, industrial pallets, and non-standard formats. ✅ Stretch Film Savings Precise film tensioning reduces consumption and lowers packaging costs. ✅ Film Compatibility Works with both black stretch film (for content concealment) and transparent film (for product visibility). ✅ User-Friendly Operation Intuitive control panel with adjustable rotation speed and number of wrap layers. ✅ Durable Construction Reinforced mast and turntable ensure long service life, even under heavy-duty use. 1650 mm Stretch Wrapper – Alternative Names & Practical Benefits This machine is also commonly referred to as: Industrial pallet stretch wrapper Pallet packing machine Blodpfx Abexnmnnjcoc 1650 mm automatic wrapper Large turntable pallet wrapper Heavy-duty load wrapping machine Regardless of the name, all serve the same purpose – effectively securing pallets and goods against damage during transportation.

Year of construction: 1995, condition: good (used), strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, drive unit for stretch wrapping machine -Manufacturer: Waldys, drive unit for stretch wrapping machine model 55 -Motor: 4 kW / 80 - 16 rpm Bodpfsu Huubox Abcslc -Individual components: see photos -Dimensions: 640/570/H680 mm -Weight: 120 kg

Year of construction: 2001, condition: ready for operation (used), Film material: LLDPE, film width: 500mm, max. roll diameter: 250mm, max. film thickness: 35µm, roll core diameter: 76mm, max. pallet length: 1675mm, max. pallet width: 1675mm, max. pallet height: 2200mm, max. pallet weight: 1500kg. Machine dimensions X/Y/Z: approx. 3000mm/2000mm/3200mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible. Bodpfx Absycigqecslc

Condition: good (used), functionality: fully functional, machine/vehicle number: 003128, empty load weight: 200 kg, Year of construction: 2003, Hello. I have a profile wrapping machine from Ruchser for sale. The machine is 100% operational and comes with roller tables. It is capable of simultaneous wrapping of the profile on three sides. If you have any questions, please contact me. Blodpfx Aex Tpgysbcec

Condition: excellent (used), Year of construction: 2020, We are offering this very well-maintained minipack Modular 50 shrink wrapping machine with tunnel, year of manufacture 2020. Manufacturer: minipack Model: Modular 50 Year of manufacture: 2020 Condition: very good Category ID: 537 Bodpfx Aboycg Dtocolc Type ID: 1669 Machine type: shrink wrapping machine with tunnel If you have any questions or require more information, please feel free to send us a message or give us a call.

Condition: used, film wrapping machine with shrink film, maximum package size: 2600 x 1300 mm Bsdpfx Asydrhmsbcslc