Used Sieve for sale (425)

Year of construction: 2021, condition: as good as new (ex-display), Rental Unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Hedjf H Azgspfx Aabofn Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Alpine Ultraplex UPZ is a universal impact mill that can be fitted with a variety of easily interchangeable grinding tolls to achieve different results, such as pin disc, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks, sieves or a combination of both to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemical or mineral products. Materials up to approx. 3 Mohs can be processed on the UPZ. The 100 UPZ is the perfect mill for the laboratory, research and development of new materials or even small scale production. Thanks to the easy mill’s door opening, that doesn´t require disassemble of other system parts nor use of tools, grinding tools exchange or revision is very quick. It is fitted with a security device that prevents the opening of the machine while in operation. Motor power: 1.5 kW Construction material: stainless steel

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net A machine is currently available immediately. The ideal machine for shredding voluminous, light aluminum chips or turnings. Not suitable for more solid aluminum parts. Includes: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blade: 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutter opening 600 x 800 mm, Funnel volume approx. 0.6 qbm, Hydraulically operated slider Sieve perforation of your choice (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available for an additional charge: - Raise the shredder by 30 cm (preparation for conveyor belt) +2,990 € net - Angle conveyor belt (discharge height approx. 220 cm) +9,770 € net - Overband magnet + €6,980 net Hedpjgmh H Tjfx Aabefn - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the chipper) We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: used, Year of construction: 2014, working width 250 mm working length 250 mm Hsdpfxswdiwyj Aabefn work height max. 280 mm laser capacity in Watt 400 Rofin travel -z axis 10 - 1000 mm/s positioning accuracy +/- 0,1 mm repeating accuracy +/- 3,5 my capacity 6,8 kVA Required air-pressure 6-10 bar Type of gas Schutzgas Stickstoff 5 bar dimensions of the machine ca. 5,9 x 4,2 x 3 m range L-W-H 2,44 x 1,63 x 2,36 m weight 2 300 kg Little used Concept Laser M2 Cusing system for processing reactive and non- reactive powder materials. Design of process chamber, handling station, powder suction according to ATEX Directive II for flammable substances. Materials: steel, stainless steel + aluminum. Supplementing titanium against additional payment possible. Dynamic coating system with 3 different wiper blades. Peripherals and accessories: Rofin laser source - photo 4 Nitrogen generator (in the other room, photo 7) External filter including fan and operating hours counter: 10464 - Photo 8. Storage container for the filter inserts. Transport device with lift for powder loading - photo 9. 6 stainless steel powder charging containers. Pneum. Vibrating sieve for attachment to the powder container. Powder container rack for swap containers, dimensions 1.15 x 0.17 x 1.22 m - photo 10. Orange wet vacuum cleaner - photo 8. Selling due to production change. Price at the time € 1/2 mio! Vid 1: Machine outside, Vid 2: Machining - created on this machine, Vid 3: Slide show Workpiece creation on this machine + accessories. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), total length: 900 mm, total width: 400 mm, total height: 1,100 mm, empty load weight: 140 kg, gasleiding: Ø50 x 3,91 mm stalen buis: Ø60 x 3 mm roestvrijstalen buis: Ø60 x 2 mm koper/alu buis: Ø64 x 4 mm massieve staaf: Ø35 mm massieve rechthoekige staaf: 60 x 10 mm vlakke staaf (hard): 60 x 16 mm platte staaf (gemakkelijk): 60 x 30 mm doosdoorsnede: 60 x 30 x 4 mm maximale straal: 200 mm Hfedpfx Aaoxllirobon buigsnelheid: 1,25 2,5 rpm video klik hier

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete wood sawing line for pallet production with stacker, formatter, chipper, edger and dust removal. Year of production 2021 Technical data: - Max wood diameter 480 mm - Min wood diameter 120 mm - Min wood length 1500 mm - Max log length 3000 mm CAPACITY UP TO 200 m3 per shift THE SAWING LINE CONSISTS OF THE FOLLOWING DEVICES: 1.BRODPOL SAWING LINE consisting of: - Log feeder - Longitudinal feeder of the sawmill - Disc sawmill – 110 and 90 kW engines - Roller receiving table with a mechanism for dumping edge and side boards - Driven roller table - SB 4000 base table - WP 210 two-shaft multi-saw – 110 and 75kW engines - Receiving table with dumping boards and feeder to the stacker - Lower return conveyor of the edgers, side feeder to the edger and conveyor belt to the chipper - sieve for sawdust 2. LIGNUMA OFZ 300 EDGER and EDGER Year of production 2023 The machine consists of the following components - centering table - MN 315 edger - SC-2 separating table - OFD 500/K edger Hfodev Dm T Tepfx Aabon 3. JABŁOŃSKI SD-250 E BOARD STACKER WITH CUTTER The device consists of the following components: - buffering conveyor - gooseneck feeder - formatter - buffer - stacker - driven output roller conveyor - straight driven roller conveyor - pallet lifter 4. TEKNAMOTOR SKORPION 650 CHIPPER EB/2 with feeder and receiver. 5. COMPLETE DUST EXTRACTION INSTALLATION FOR ALL DEVICES

Condition: used, Power: 1 kW (2 HP) Current frequency: 50 Hz Voltage: 220/380 Rotational speed: 700 Manufacturer : AZO Model: E450 B1 Type : Rotary sieve Application : Control and safety screening Stainless steel Motor power : 1,3 kW Hedpfx Aevlznneabjfn ATEX classification: Exe G1-3 Te 30 Capacity: max 6000 KG / H depending on screen size Documentation available

Year of construction: 2008, condition: refurbished (used), functionality: fully functional, Fully refurbished Hosokawa Alpine UPZ 100 used system by Alpine Originals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation (N2) Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Hsdpfx Aeq Rv E Djabofn Scope of supply 100 UPZ system in large table fitted with pins (other grinding tools of choice could be offered for an additional price), small feeding hopper with a dosing screw, filter and barrel to collect the fines, blower and piping. Includes a relay control panel. This small size system with an universall mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: excellent (used), CATALOGUE NUMBER 7610 Technical data: - inlet width 410mm - inlet height 140mm - shaft width 430mm - shaft diameter 400mm - number of knives 2pcs - sieve dimensions 80x130mm - top pulling shaft, toothed - bottom 2 pulling shafts, toothed - feed belt length 2850mm - feed belt width 390mm - auto reverse - main engine 30kW - feed motor 2×2.2kW - machine dimensions L/W/H 4800x1550x1200mm - weight approx. 2200kg Hsdpov Ubikjfx Aabofn ADVANTAGES - Polish production - auto reverse - with conveyor belt - DTR documentation - used chipper, very good condition good Net price: PLN 75,900 Net price: EUR 17,860 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: used, Year of construction: 2010, total length: 1,750 mm, total height: 1,660 mm, total width: 1,500 mm, Price: On request - Rotor width [mm]: 630 - Number of shafts [pcs.]: 1 - Opening width [mm]: 810 - Opening length [mm]: 630 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 28 - Year: 2010 - Documentation available: No - CE marking present: Yes Hfjdjxixitopfx Aabsn - Serial number: 0509 - Transport dimensions: 1750mm x 1500mm x 1660mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: like new (used), Year of construction: 2024, operating hours: 150 h, functionality: fully functional, Under 150 spindle hours!!! Including HAIMER Power Clamp Economic Plus NG shrink fit device, year: 2024 Including tool holders, clamping devices, and tools Manufacturer: DMG MORI SEIKI Model: DMU 50 3rd Generation, Stealth Design Control: CELOS with HEIDENHAIN TNC640 Year: 2024 Operating hours (approx.): Spindle hours: 140 h, Power-on hours: 790 h EQUIPMENT: - Swivel rotary table, simultaneous - Direct measuring systems and plane transformation in B and C axes - Scraper belt chip conveyor with cleaned gap sieve - Internal coolant supply (IKZ) - Coolant/air blow-off switchable via M-function - Rotating inspection window - Rinsing gun for chip removal - Oil and emulsion mist extractor - Infrared probe, Renishaw Blue Power Probe Kit - Laser tool measurement Renishaw NC4 - Tool length and diameter measurement - Automatic cleaning of the measuring system by air blast - Calibration arbor for tool measurement Hedpfxsxgh H Ne Aabjfn - 3D quickSET - Quick stop for machine protection, MPC – Machine Protection Control - Automation interface, Profibus M65 - Automatic loading door - Work table with 4-channel rotary feedthrough - Machine-side automation software interface - Electronic handwheel - RMS sensor, internal handling - Digital Manufacturing Package - Messenger V4 - Service Agent - Direct path measuring systems in all axes TECHNICAL DATA: Travel paths: X: 650 mm, Y: 520 mm, Z: 475 mm Clamping area: D630 x 500 Swivel range: -35 to +110° Rotary axis: 360° Rapid traverse: 42 m/min, direct drive Tool holder: HSK-A36, BIG-PLUS compatible, speedMASTER® motor spindle Spindle speed: 20 – 20,000 rpm Spindle power: 35 kW/25 kW (40/100% duty cycle) Spindle torque: 130 Nm/86 Nm (40/100% duty cycle) Tool magazine: 60 slots, incl. setup aid for loading This used machine can be inspected under production conditions. All information without guarantee – sale excludes any guarantees and warranties. Subject to prior sale. Our general terms and conditions of sale and contract apply.

Year of construction: 2025, condition: refurbished (used), functionality: fully functional, Rental Hosokawa Alpine CS 25 compactor system by Alpine Rentals. Technical details Material of construction: - product contacting parts: stainless steel - non product contacting parts: stainless steel/mild steel - non ATEX - Non Pressure Shock Resistant (NPSR) Scope of supply Compactor CS25 with 11kW motor and AFC 200 capable of producing briquettes, granulates, pellets and even be used as a roller crusher depending on the fitted rolls (pending availability). The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Suitable to process many different products for industries such as minerals, chemicals, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Hfjdpfx Aaevq Rirjbjn Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: excellent (used), Catalog number 7411 TECHNICAL DATA - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from the bottom - lower shaft motor 1.5kW - toothed pulling shaft from the top - upper shaft motor 1.5kW - belt feeder - feed belt length 2250mm - feed belt width 400mm Hodpfjt N Tt Tjx Aabefn - main motor 30kW - auto reverse - overall dimensions length/width/height 4300x1630x1000mm - weight 1800kg – German production - auto reverse (possibility of adjustment) - used chipper, very good condition Net price: PLN 69,900 Net price: EUR 16,450 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Year of construction: 2016, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Hfjdpjiuxv Nefx Aaben We are also interested in buying back disused HOSOKAWA ALPINE machinery Lightly used Hosokawa Alpine Ventoplex C32V air classifier in very good conditions. Recirculation classifier perfect for fine classification of abrasive products separating a fine fraction from the coarser one to ensure a perfect top cut of the product or dedust it getting rid of undesired ultrafines. It is suited for high yields with low energy consumption. Our classifiers obtain the perfect end product particle design. Our air classifiers allow you to split the product into two fractions, a fine and a coarse one, when a regular sieve can´t achieve this task due to product fineness or other characteristics. This is handy when you need to dedust the product removing the undesired fine dust or ensure a certain top cut separating the oversize coarse material, allowing you to adjust your product´s particle side distribution (PSD) to the required specification. This unit is suitable to process abrasive materials, mainly for the minerals industry. Material of construction: mild steel with wear protection Non pressure shock resistant (NPSR), non ATEX Scope: Hosokawa Alpine Ventoplex C32V with 15 kW motor and frequency converter for classifier wheel, 37 kW motor and frequency converter for ventilator wheel, internal feeding screw 5,5 kW motor with frequency converter, external blower for cooling 3 kW motor

Condition: excellent (used), CATALOGUE NUMBER 7613 Hfedpfswa Aqlsx Aabon Technical data: - inlet width 650mm - inlet height 300mm - shaft width 660mm - knife length 660mm - number of knives 2pcs - sieve dimensions 90x100mm - 2 toothed pulling shafts from the bottom - lower shaft motor 3kW - 2 toothed pulling shafts from the top - upper shaft motor 3kW - belt feeder - feed belt length 2700mm - feed belt width 630mm - main motor 75kW - auto reverse - reverse gear - overall dimensions length/width/height 5350x1300x1300mm - weight 4200kg ADVANTAGES – Italian production – auto reverse (possibility adjustment) - reverse gear - used chipper, very good condition Net price: PLN 149,900 Net price: EUR 35,270 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nitrogen of different products, to help in their grinding process (plastics for instance) or maintain their properties (food for instance). The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. Hsdpfoq Rv Hhjx Aabofn A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: excellent (used), CATALOGUE NUMBER 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of shredded material 160mm - shaft width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - sieve dimensions 25mm - pulling pressure shaft at the entrance 0.75kW - toothed pulling shaft from the bottom 1.8kW - toothed pulling shaft from the top 1.8kW - vibrating chute length 4470mm - vibrating chute width 710mm - vibrating chute motor 2.2kW - main motor 55kW - auto reverse - diameter of the exhaust port 260mm - vibrating chute dimensions length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight approx. 5500kg - German production - very low mileage - original documentation Hfedelrvg Uepfx Aaben - auto reverse (adjustable) - used chipper, very good/perfect condition Net price: PLN 159,900 Net price: EUR 37,620 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations, the price may change)

Year of construction: 2024, condition: like new (used), functionality: fully functional, Rental Hosokawa Alpine RO 28/40 system by Alpine Rentals. Cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee, spices, dried vegetables, etc.). Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, non gas tight Material of construction: -product contacted parts: stainless steel -non product contacted parts: normal steel Food grade Wear protection: without Scope of supply Complete Hosokawa Alpine Rotoplex RO28/40 production plant consisting of: mill inlet with safe design for manual feeding, mill with rotor, knifes and sieve for the rotor, including a relays control cabinet everything fitted on a frame, product fines collecting barrel and vacuum cleaner with filter. REMARK: The user must provide an on site operating platform for the operator to safely handle the feed material and feed it in to the mill. This is NOT part of our scope. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Hfsdpfx Aaev Dalpsbjn Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - inlet width 740mm - inlet height 300mm - shaft width 780mm - shaft diameter 1000mm - knife length 780mm - number of knives 2pcs - sieve dimensions 55x55mm - 4 toothed pulling shafts from the bottom - lower shaft motor 5.5kW - 3 toothed pulling shafts from the top - upper shaft motor 5.5kW - belt feeder - feed belt length 4300mm - feed belt width 600mm - belt feed motor 2.2kW - main motor 90kW - reverse gear - auto reverse - total machine dimensions L/W/H 4600x2350x1700mm - total dimensions of the feeder L/W/H 4550x980x970mm - total weight approx. 11000kg - German production, - auto reverse (adjustable) - used chipper, very good condition Hfedpfxoma Hv Do Aabjn Net price: PLN 285900 Net price: EUR 67270 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Year of construction: 2003, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Turboplex ATP 200 air classifier for the perfect end product particle design. Our air classifiers allow you to split the product into two fractions, a fine and a coarse one, when a regular sieve can´t achieve this task due to product fineness or other characteristics. This is handy when you need to dedust the product removing the undesired fine dust or ensure a certain top cut separating the oversize coarse material, allowing you to adjust your product´s particle side distribution (PSD) to the required specification. This unit is suitable to process many different products for all kind of industries, like minerals, chemicals, etc. Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Without wear protection Non pressure shock resistant (NPSR) Scope: Hfjdpfx Aaoic Nq Hjbsn Hosokawa Alpine bare Turboplex ATP 200 air classifier with one single classifier wheel and 5,5kW motor

Condition: excellent (used), CATALOGUE NUMBER 6943 TECHNICAL DATA - hopper inlet 1600x1500mm - rotor working width 1500mm - main engine 45kW Hsdpfelnkxwsx Aabsfn - pump engine 5.5kW - number of knives 44pcs - knife dimensions 50x50mm - sieve 59mm - pressure drawer - auto reverse - dimensions length/width/height 3430x2800x2850mm - weight about 9000kg ADVANTAGES - French production - new knives installed - auto reverse - pressure drawer - very good condition - used chipper Net price: PLN 159900 Net price: EUR 37620 Net price calculated according to the exchange rate of PLN 4.25/EUR (with larger fluctuations (price may change)

Year of construction: 2006, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Hfodpfxoh U Awno Aabjn Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Refurbished Hosokawa Alpine compactor CS 25. The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Suitable to process many different products for industries such as minerals, chemicals, etc. Material of construction - product contacting parts: stainless steel - non product contacting parts: mild steel Non ATEX - Non Pressure Shock Resistant (NPSR) Scope: Compactor, with 11kW motor for compactor rolls and 4kW for the feeding screw, switch cabinet

Condition: excellent (used), CATALOGUE NUMBER 7032 Hfjdpjmgbt Iofx Aabsn TECHNICAL DATA - loading hopper inlet 1050x610mm - outlet for shredded wood fi 160mm - working width of the rotor 580mm - main engine 18.5kW - pump engine 0.75kW - number of knives 14pcs - knife dimensions 30x30mm - sieve 15mm x 20mm - pressure drawer - electric auto reverse - dimensions l/w/h 2000x1130x1530mm - weight 970kg ADVANTAGES - German production - auto reverse - pressure drawer - very good condition - used chipper Net price: PLN 47,900 Net price: EUR 11,260 Net price converted at the exchange rate of 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Year of construction: 1992, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Hfsdpfx Ajg R Smvoabon Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Used Hosokawa Alpine ARC MS 50 compactor, made of stainless steel. The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Scope of supply: Compactor, with 30kW motor for the compactor rolls and 7,5kW for the feeding screw

Year of construction: 1999, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Hodpfx Aaei E Himobjfn Used Hosokawa Alpine APC K 200-50 pharmapactor with Flake Crusher AFC 300. The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Specially built for pharma industry. Material of construction: - product contacting parts: stainless steel - none product contacting parts: stainless steel Non Pressure Shock Resistant (NPSR), non ATEX Scope: Hosokawa Alpine Pharmapaktor APC K200/50 with 4,0 kW motor, feeding screw with 1,1 kW motor + Flake Crusher AFC 300 with 0,75 kW motor

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Fully refurbished Hosokawa Alpine ARC MS 36 used compactor by Alpine Originals. Technical details: Product contacted parts in stainless steel Non product contacted parts in normal steel Non ATEX, Non Pressure Shock Resistant (NPSR), can be operated inerted with N2 (not part of our scope) Scope of supply: Feeding, MS 36 compactor and control cabinet The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Hfsdpfxevq Nq Us Aabsn Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery