Used Silo for sale (659)

Year of construction: 2010, condition: like new (used), 20m³ OFFLINE - FLUORINATION Fluorination of plastic surfaces with reactive gases for permeation reduction Njdpfeid Ngdox Aiyjda The technology used is suitable for treating surfaces of plastic fuel tanks (PFT) with the help of fluorine gas mixture (10% F2/N2) and changing the surface properties in such a way that a desired reduction of permeation of fuels from the PFT into the environment and thus the emission of fuel vapors is significantly reduced. Technical data: Vacuum chamber (capacity): 20 m3 Process time, individual: (approx. 2.5 hrs.) Chamber temperature, jacket: 90 - 100 °C Products introduced: Fuel tank and accessories Material: stainless steel 1.4301 and similar Min. vacuum pressure: 1 mbar (a) Process pressure : 350 - 700 mbar (a) Nitrogen inlet pressure : 15 bar(g) F2/N2 inlet pressure : 150 bar, alternatively 100 bar Gas mixture 1 10% F2 in N2 Gas mixture 2 20% F2 in N2 as gas mixture MAK values H, HH 0.1 ppm F2, 0.2 ppm F2 Supply voltage 400 V Frequency 50 Hz Connected load, max. 200 kW Back-up fuse 150 A The fluorination plant consists of the following components: - A treatment chamber (20m3), into which the plastic material to be fluorinated can be placed in material baskets/boxes suitable for this purpose, - A bundling station for fluorine-nitrogen mixtures Bottle bundles of 12x50 liters for 10% F2/N2 at 150 bar and 20% F2/N2 mixtures at 100 bar, - Amature panel for nitrogen supply of the process flow, - Vacuum pumping station in a container, for conditioning and disposal of the treatment chamber - Heating system for temperature control of the treatment chamber - Control cabinet with a programmable logic controller S7/ WIN CC7 - Operator control station for process monitoring, process parameter setting and the visualized plant picture, as well as the trend control, the error message system, the protocol output, - Al2O3 absorber (silo) Dimensions: Lower unit: vacuum chamber heated, with control cabinet. length: 7500mm width: 2850mm height: 2380mm weight approx. 12.000 Kg Upper unit: pump chamber Length: 4100mm width: 2850mm height: 3000mm Weight approx. 5.000 Kg

Condition: excellent (used), Year of construction: 2014, Scheuch cyclone with rotary valve and spark extinguisher for wood chips Cyclone as bunker or silo structure with attached rotary valve Designation: fru v 1000-04/014-B Serial No.:/Year: F-1633/14 System is dismantled and immediately available Nsdpfx Asuvdploiyjda

Condition: good (used), functionality: fully functional, color: blue, tank capacity: 80,000 l, machine/vehicle number: AHL-80, storage tank with the capacity of 80.000 liter for liquid fertilizer Nedpfxjb Avh Aj Aiyoda

Condition: good (used), Bunker with auger bag ripper control auger in good condition wear cookies available please contact via fue mobile number Ndedpfspith Tjx Aiyja

Condition: new, Year of construction: 2025, Ideal for shredding straw, polystyrene, leaves, hay, and bread. Throughput is highly dependent on the screen and the input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW - 400 volts, (9.2 kW or 15 kW also possible upon request) Optional: *Additional cost for the next larger machine with 18.5 kW and a larger silo diameter: + €2,750 net Robust steel construction, hardened cutting blades, screen with interchangeable inserts, optionally with (10), 15, 22, 26, 30, 40, or 60 mm perforations For electric drive with star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge spout 150 mm, optionally for plastic or grain pipes, blowing distance approx. 12 m, chassis with 2 running wheels, Ø 380 mm, and one pivoting support wheel, Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) Ndodpozbizjfx Aiyja Weight approx. 240 kg, Spare part prices and options: 24 blades, hardened, €9.90 net each 6 bolts, €14.90 net each 1 screen, €475 net Cover, €290 net each Polystyrene disc: €600 net each

Condition: new, Year of construction: 2026, functionality: fully functional, We deliver the machines where you want them, install them if you wish by mutual agreement. Optional: stainless steel drain element, stainless steel storage silo, blower, pipes approx 3 meters. Njdst Iw Huepfx Aiyoda Grinder 800 series 22 kW or 37 kW 3 x 2 blade set configuration. Bwj3E79Mpn 2 x stators screen deck your request With Variablele Frequency controller, Optional Product discharge and storage in various options in combination extra favorably priced Motor power adaptable. Other adjustments can be discussed such as a rotor adjustment, more blades e.g. 5 rows of blades or heavy duty version. Delivery / time in consultation. Call or email us for consultation or if you have questions, please respond with your name, company name, and correct phone number. Without these correct details RSS Recycling Shredders and Solutions (Netherlands) cannot respond.

Condition: used, machine/vehicle number: ...11, mileage: 6,88,323 km, power: 340 kW (462.27 HP), first registration: 11/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, AdBlue, EBS, additional headlights, air conditioning, central locking, compressor, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, lane keeping assist, low noise, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, spoiler, tachograph, traction control, DAF XF 460 FT ∗SuperSpaceCab ∗Euro6  - INTARDER - STAND-UP AIR CONDITIONING - FULL SPOILER with SIDE PANELS -  - PTO (Power Take-Off) - COMPRESSOR PREPARATION -  * Vehicle had a DAF MAINTENANCE CONTRACT *  Nsdpfx Aijk Rpl Hsyjda Equipment:  - PTO (Power Take-Off)  - COMPRESSOR PREPARATION  - SlimCool STAND-UP AIR CONDITIONING SYSTEM  - ZF INTARDER  - SIDE PANELS  - Luxury Air driver's seat  - Seat heating  - ATC air conditioning  - DPA Driver Performance Assistant  - ALUMINUM WHEELS  SAFETY ASSISTANCE  ACC Adaptive Cruise Control  FCW Forward Collision Warning/Distance Cruise Control  AEBS Advanced Emergency Braking System  Lane Change Warning System  - Euro6  - Automatic transmission  - ZF Intarder  - Super-Space-Cab cab  - 2 beds  - DAF original REFRIGERATOR  - ATC air conditioning  - Auxiliary heater  - On-board computer  - Cruise control  - Central locking  - Additional headlights/long-range, wide-beam headlights  - Differential lock  - Axle load monitoring  - Aluminum tank  - ALUMINUM WHEELS  - Front tire size: 385/65R22,5  - Rear tire size: 315/80R22,5  - etc. .....  + Optional: SILO COMPRESSOR available at an additional cost! Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We will take care of all customs matters for you.  What to do with your old vehicle? We are happy to take it in as part of a trade-in.  For exports outside the EU, the statutory VAT must be deposited as a security.  This offer is non-binding and subject to change. Errors and prior sale excepted.

Condition: used, functionality: fully functional, Aluminum flour/sugar silo with a tall support ring (used), designed for a bulk density of 0.95 kg/dm³ Nsdpfx Asyhzm Rjiyoda Volume: 70,000 liters Available quantity: 1 Diameter: approx. 2,400 mm Cylindrical height: approx. 17,500 mm Overall height: approx. 19,200 mm (including roof edge railing) Material: AlMg3 Bulk density: 1.0 kg/dm³ Equipment and connections: In the upper section: 1 x access opening DN 600 with cover 1 x over/underpressure valve 1 x top-mounted ventilation filter (ø 1000 x 5 mm) 1 x flange DN 125 for filling pipe 1 x flange DN 50 for pressure transmitter 1 x roof edge railing with handrail 2 x crane eyelets On the shell: 1 x access door 850 x 1800 mm 8 x pipe support ø 108 mm for filling pipe 1 x filling pipe DN 100, ending in a TW connection at the bottom 1 x cable protection conduit DN 50 1 x block flange for level indicator 1 x rupture disc Various pipe penetrations in the area of the lower support ring The silo has a 40° cone at the bottom, which ends in a flange DN 1500 for mounting a vibratory base. At the bottom/cone: 1 x vibratory base VB 1400 with motor, manufacturer AZO 1 x block flange for empty level indicator The currently connected measuring and control technology is included in the above offer. However, no guarantee is given for its function! Please note that the connections and equipment of the four silos may differ slightly. Otherwise, as per the images and drawings.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 120 Production capacity: 120 m3 Mixer type: Twinshaft – 3 m3 Aggragate bunker: 4x20 m3 Cement weighing: 1750 kg Additives weighing: 40 kg Water weighing: 1000 lt Cement silo is optional. Nsdpozar Edefx Aiyjda COMPACT 120 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2017, condition: ready for operation (used), Granulation line, regranulation extruder, Yei machine I. PE/PP waste regranulation line, model: YDN-120 Material: PP/PE Maximum capacity: PP: 550 kg/h PE: 650 kg/h Installed power: 420 kW Power consumption during operation: approx. 250 kW Water consumption: approx. 25 l/min Required water pressure: 3 kg/cm² 1) Extruder Designed for double degassing Double-stage gearbox Screw diameter: 120 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 32:1 Rotation speed range: 0-130 rpm Heater power consumption on the barrel: 51 kW Ndedpfxjzhm Ihs Aiyja Number of heating zones on the barrel: 5 Barrel cooling: 1/8 HP x 5 fans Motor: 175 HP, controlled by a frequency inverter 2) Screen changer, 15 HP Filter area: 90,639 mm² x 2 Equipped with a pressure sensor with alarm. In case of excessive pressure, the machine will automatically shut down. One temperature control zone. 3) Knife system for granulating at the extruder head Number of knives: 4 pcs Temperature control: 1 zone Heating power: 3.5 kW 2 heads for PE 4) Water cooling system Motor: 5 HP, controlled by a frequency inverter 5) Shredding and pre-compacting drum Vertical type with temperature sensor Motor power: 150 HP, controlled by a frequency inverter Equipped with 12 rotary knives and 17 stationary knives Mill diameter: 1300 mm Blower: 7 1/2 HP Continuous water cooling device 6) Belt conveyor Dimensions: 4950 mm (length) x 670 mm (width) Motor: 2 HP 7) Vibrating dryer Water pump: 5 HP x 1 Vibration motor: 1/4 HP x 4 pcs Water tank dimensions: 3615 mm x 700 mm x 471 mm 8) Regranulate silo (with a centrifugal blower of 7.5 HP with a transport pipe) 9) Control panel Indicates the operating status of all major electrical devices The machine is equipped with a double cylinder screen changer, allowing for screen changes without stopping the machine. The line is designed in a compact way, which saves usable space. The device requires maintaining the cooling water temperature: 25-35°C Equipment: Enlarged drum to 1300 mm with 150 HP motor Second degassing port on the first screw with a vacuum pump Metal detector 5 HP centrifuge Second "cascade" plasticizing module (150 mm screw) with filter with a single degassing port and vacuum pump double-stage gearbox Parameters of the second plasticizing module Screw diameter: 150 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 20:1 Rotation speed range: 0-130 rpm Number of heating zones on the barrel: 2 Motor: AC 75 HP, controlled by a frequency inverter Control panel Hydraulic screen changer x 2 cylinders Additional equipment Increased filter area on the first screen changer: Standard: diameter 140 mm x W126 mm = 55,389 mm² x 2 After enlargement: diameter 204 mm x W141.5 mm = 90,639 mm² x 2 The delivery includes additional cooling for the control cabinets Static mixer with a connecting pipe for homogenization and uniformization of the mass.

Condition: used, Year of construction: 2010, functionality: fully functional, 37 kW grinder hopper and mixer 75 kW fine grinder intermediate storage silo feed screw ANDRITZ Paladin model press, 2 tons/hour product elevator cooler bagging machine Ndodpfx Aozlfcxoiyja

Condition: good (used), Used stainless steel tank / silo Article number: 10575 Volume: 2885 L Type: Standing on 3 legs Height of legs: 690 mm Material (in contact with the medium): 1.4301 / AISI304 Design: Single-walled Bottom: Conical bottom Nedpfx Aisg Sr Atsysda Top: Curved Operating pressure according to nameplate: 3 bar Max. operating temperature: 50 °C Tank dimensions: Diameter: 1500 mm Overall height: 2195 mm Overall width: 1610 mm Overall length: 1735 mm Materials: Inside: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Features: Nameplate: yes Outlet diameter: 114 mm Distance from outlet to bottom: 300 mm Various connections (1x at the bottom, Ø 195 mm; 1x at the top, Ø 164 mm) Side manhole 345x444 mm

Year of construction: 1990, condition: good (used), Short/ Nest Line Capacity - 400 kg/h 1. Silo - cyclone 2. Big silo 3. small silo 4. Mixer 5. Extruder 6. Chain with dough buckets 7. Dryer 8. output transporter 9. Chain conveyor for buckets - 2 pcs 10. Elevator (at the end of the line) 11. Trans, strip of finished product 12. Comand pult 13. El Cabinet 14. Automatic packing Unit Ndjdpfx Aien Arzkjyja

Condition: excellent (used), Year of construction: 2015, COMPLETE PELLET PRODUCTION LINE 6 t/h Hydraulic walking floors - double for hard and soft wood Conveyor belt 12m with magnetic separator for chips Two hammer mills each 130 kW for wet material Two beams with hydraulic floor befor drum dryer Dryer for drums of 12 m FIEDLER boiler 3.5 MW Refiner 250kW with transport fan and filter Silos bin ZEPI for dry material Z conveyor ZEPI above three silo bins for pellet mill 0qe0k Ndodpfxjqy Hcdj Aiysa TRI Pellet Mill ZEPI ZPM600 with 200kW (2pcs) and 160Kw Pellet mill production year 2015 (two pcs) Conveyor belt 10m for hot ball, conditioner and aspirin system vibro sieve ESSEGI packaging system (ITA) 2019 Pallet system ROBOTIK KOGLER (SLO) 2015 Grecon spark detection system Electrical cabinet room for complete equipment Line in operation, capacity 6-7 t/h

Condition: excellent (used), Catalogue number 7985 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 50mm - Silo diameter: 1000mm - Output: up to 10 briquettes/min, up to approx. 90 kg/h - Automatic machine operation - Motor: 5.5kW - Dimensions (L/W/H): 1720x1100x1500mm - Weight: approx. 650kg Ndjdpfx Aiozh Iy Eoyea ADVANTAGES – Italian made – Used briquetting press – Not repainted – Very good condition Net price: 32,900 PLN Net price: 7,830 EUR (at an exchange rate of 4.2 EUR) (Prices may change with significant fluctuations in exchange rates)

Condition: like new (used), Used stainless steel container / transport container / IBC Article number: 10654 Last application: Pharmaceutical Quantity: 97 Volume: 785 liters Type: Standing in a stainless steel stacking frame Material (in contact with the medium): 1.4404 / AISI316 Height of feet: 930 mm Manhole: 400 mm Empty weight: 178 kg Design: Single-walled Operating pressure according to nameplate: ATM Container dimensions: Overall width: 990 mm Overall length: 1190 mm Overall height: 1545 mm Materials: Interior: 1.4404 / AISI316 Exterior parts: 1.4301 / AISI 304 Equipment: Nameplate: No Diameter of blind flange: DN 80 Diameter of outlet: DN 100 DIN11851 Nozzle on the top: DN 50 Ndsdpfxeig Huze Aiysa

Condition: like new (used), Year of construction: 2026, operating hours: 6 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Ndedjxfwdspfx Aiyja Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Nodpfxjzump Ej Aiyjda Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE MEET OUR NEW INNOVATION MINIMIX-30! In this period when many products are mobilized and cost items are underestimated due to the current era, we continue to offer solution-oriented projects to our customers' concerns. As FABO Company, to reduce investment costs of our clients and provide them with quality service, we offer our new innovative MiniMix-30 model with affordable prices, which can be shipped by only one container. This plant, which is constructed completely by new parts on a new platform, has an economic structure and can be used to produce concrete mixture according to international standards on projects which require fairly moderate amount of concrete. Advantages of Mobile Minimix Concrete Batching Plant; - Cost effective shipping to overseas with 1 x 40 ft OT Container along with all its equipment’s - Minimizing installation area of the plant - Transportable by towing on roads - Can be installed, re-installed and transported in a very short period of time. - Ready Concrete Mixture conveyed by feeding conveyor to concrete mixing truck - According to the amount of the used concrete can be used Big Bag or small Bolted Silo - By complete automatic system can be produced homogeneous concrete Minimix model plant consists of following parts: - 4 x 5m3 Aggregate Bunker - 1m3 Aggregate Weighing Hopper - 600 x 4250mm Aggregate transfer conveyor - 600 x 12000mm Ready mixture transfer conveyor - 0.5m3 Pan Mixer - 300 kg Cement Weighing Hopper - 200 lt Water Weighing Hopper Ndjdpfx Aszvqlysiyea - 20 kg Admixture Weighing Hopper - 300 lt Air compressor - Optionally, Big Bag Blasting or 30 Ton Bolted Silo - Electrical switchboard consisting of Siemens switchgear - PLC Automation System Production capacity: 30 m3 FOR FURTHER INFORMATION, PLEASE FEEL FREE TO CALL US!!!

Condition: used, Applicable material: Concrete Capacity: 30 m^3/h Site type concrete batching plants has been issued for easy installation and easy legal procedures. Site batching plants consist of aggregate hoppers, from 2 to 8 pcs differant aggregate can be used such application, belt onveyor or skip hoist to transfer material from hoppers to mixer, mixing section, pan,planetery,twin shaft, single shaft or cone mixer, weighing section. Site type concrete batcing plant is for very fast location changer customers. After once installation you will never ned to disassembly iy again due to 4.5 full operation height. With 0,75m3 planetery mixer; Polygonmach site plants are best for small scale operations and all type of concrete you need. Site type plant a kind of mobile type plant however it has got shipment price advantages, all site type plant set consist of concrete transfer belt conveyor, cement silo can go with single container around the world. With axles, towing hook make it easy to trasnport in hours. Nsdpex Dx Dyjfx Aiyeda Portable batching plants,concrete plants, mixers are used to prepare precious dosed material by pneumatic cylinders and clamshell outlets, afterwards the material is weighed by weighing bin under hoppers. The material has been consisted of sand and aggregate(0-4mm, 4-8mm, 8-16mm, 16-32mm or similar). For excise material transfer procedure, belt conveyor. The sand and aggregate is waited before discharge to mixer. Additonally, there is weighing bin at top of mixer which consist of cement weighing scale/hopper, water hopper, liqued addtive hoppers. After sand and gravel discharged into mixer, cement, water,additive, sand and gravel is mixed on recipe based the mixing time chnages as per recipes. Mobility: mobile Capacity: 45 m³/

Condition: used, Applicable material: Concrete Capacity: 30 m^3/h Site type concrete batching plants has been issued for easy installation and easy legal procedures. Site batching plants consist of aggregate hoppers, from 2 to 8 pcs differant aggregate can be used such application, belt onveyor or skip hoist to transfer material from hoppers to mixer, mixing section, pan,planetery,twin shaft, single shaft or cone mixer, weighing section. Nsdpsylhdgsfx Aiyoda Site type concrete batcing plant is for very fast location changer customers. After once installation you will never ned to disassembly iy again due to 4.5 full operation height. With 0,5 and 0,75m3 single shaft and planetery mixer; Polygonmach site plants are best for small scale operations and all type of concrete you need. Site type plant a kind of mobile type plant however it has got shipment price advantages, all site type plant set consist of concrete transfer belt conveyor, cement silo can go with single container around the world. With axles, towing hook make it easy to trasnport in hours. Portable batching plants,concrete plants, mixers are used to prepare precious dosed material by pneumatic cylinders and clamshell outlets, afterwards the material is weighed by weighing bin under hoppers. The material has been consisted of sand and aggregate(0-4mm, 4-8mm, 8-16mm, 16-32mm or similar). For excise material transfer procedure, belt conveyor. The sand and aggregate is waited before discharge to mixer. Additonally, there is weighing bin at top of mixer which consist of cement weighing scale/hopper, water hopper, liqued addtive hoppers. After sand and gravel discharged into mixer, cement, water,additive, sand and gravel is mixed on recipe based the mixing time chnages as per recipes. Mobility: mobile Capacity: 30 m³/h(1,059.44 ft³/h)

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Njdpfx Aowg R Rtsiyeda

Condition: used, ? Polygonmach PVB150 Mobile Concrete Plant | Cold asphalt plant, RCC mixing plant, soil compound mixing plant. Emulsion mixing plant ? Polygonmach PVB150 is a next-generation mobile concrete plant designed to meet the demands of modern construction projects for speed, flexibility, and cost-efficiency. It offers dual-mode production – both Volumetric and Batch type operation – on a single platform, delivering perfect compatibility for all project types. ✅ Dual-Mode Flexibility: • Volumetric Mode: On-demand, instant production up to 200 m³/hour directly at the site • Batch Type Mode: Precision recipe-based production up to 100 m³/hour ✅ Key Features: • Fully Automatic or Manual Operation: User-friendly control panel allows seamless control • Precision Weighing System: Ensures accurate dosing, minimizes material waste • Multiple Mix Recipes: Easily switch between different mix designs • Separate Storage Bins: 3x8 m³ aggregate hoppers, 5-ton cement silo, water & additive tanks • Filling Conveyor: Fast and efficient loading • Quick Setup: Ready to operate in just 10 minutes • Fully Mobile: Maximum ease in site-to-site transportation • Low Logistics & Transport Costs: On-site production eliminates ready-mix losses • Sustainable Production: Mix only what you need, when you need it • Recycling-Friendly: Supports the use of recycled materials when needed ⸻ ? Multi-Purpose Capability – One Platform, Many Solutions: In addition to concrete production, the PVB150 is engineered to serve as: • Mechanical Stabilization Plant • Cold Asphalt Mixing Plant • Emulsion Mixing Plant • Soil Compound Mixing Plant This multi-functional system makes Polygonmach PVB150 the most versatile solution on the market for road construction, infrastructure development, and short-term or small-to-medium scale projects. ⸻ ?? 100% Made in Turkey | Smart Technology | High Performance | Eco-Friendly Operation Ndjdpfx Asyf Dbneiyea ✅ Replace fixed plants with a smarter solution. ✅ Reduce setup costs, increase mobility, boost site efficiency. ⸻ ? Contact us today and transform your jobsite! ? ? ?

Condition: new, functionality: fully functional, power: 205 kW (278.72 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH COMPACT-120 fully automatic concrete plant is a compact concrete production facility designed to offer high production capacity even in limited land conditions. Thanks to its reduced dimensions, it requires minimal space, yet delivers equivalent performance to stationary plants with a production capacity of 120 m³/h. This feature makes it an ideal solution, especially for urban projects, narrow construction sites, or projects requiring frequent relocation. The COMPACT-120 concrete plant can be manufactured with linear or square aggregate bunker options according to user needs. This allows for flexible use in both fixed and mobile plant concepts. Manufactured in compliance with CE standards, the plant offers significant cost advantages to businesses with its quick assembly, easy transportability, and low infrastructure requirements. Steel-legged cement silos eliminate the need for concrete foundations, while the aggregate feeding ramp can be conveniently prepared using a metal wall system. The 3 m³ capacity twin-shaft mixer used in the production line provides homogeneous mixing quality, while the plant's entire automation system is equipped with high-end components from SIEMENS and SCHNEIDER. The PLC-controlled system, with its advanced software interface, provides operators with ease of use and maximum control. COMPACT-120 Compact Concrete Plant Technical Specifications Nedpfxoxp U Ilj Aiysda Production Capacity: 120 m³/h Weight: 55 tons Total Motor Power: 205 kW Electric Generator Requirement: 300 kVA Mixer Type: Twin-Shaft Mixer Working Area: 600 m² Aggregate Storage Bunker: 4 x 30 m³ Aggregate Weighing Bunker: 4.5 m³ Aggregate Weighing Belt: 1,000 x 11,100 mm Aggregate Transfer Bucket Volume: 6 m³ Mixer Wet Concrete Volume: 3 m³ Cement Weighing Bunker: 1,800 kg Water Weighing Bin: 1,000 liters Additive Weighing Bin: 100 liters Air Compressor: 500 liters, 5.5 kW Cement Silo: Capacity options between 100 and 500 tons Control Type: Fully Automatic Why Should You Choose the COMPACT-120 Concrete Plant? CONSTMACH COMPACT-120 combines high production capacity with a compact design to offer investors maximum efficiency. With its low operating costs, easy installation, and portability, it is the perfect solution for both short-term and long-term projects. This plant, with all components from world-class brands, is designed for long-lasting and uninterrupted production. Offered with the CONSTMACH guarantee, the COMPACT-120 combines quality, durability, and engineering excellence in a single structure. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole Nodswrp Emepfx Aiyeda - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las