Used Sine Wave Ruler for sale (396)

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 3200 mm Cutting width at the width stop: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: electric Pivot adjustment saw blade: electric Width stop adjustment: electric Display saw blade angle: digital Gusdpfxjhpl Uno Alfsb Display cutting height: Digital Display width stop: Digital Display cutting ruler: Digital Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Weight: 1000kg

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine - Gedpfou R S Erjx Alfoub

Condition: ready for operation (used), Year of construction: 2001, Panel saw manufactured in 2001. This PANHANS EURO 32 features a cutting length of 5800 mm, a cutting width of 2x2200 mm, and a maximum cutting height of 100 mm. It includes a hydraulic lifting table with roller conveyor and an automatic angle cutting device. If you are looking to get high-quality panel cutting capabilities, consider the PANHANS EURO 32 machine we have for sale. Contact us for further details. Gsdpfx Aoyn Nccolfeub • Cutting length: 5800 mm • Cutting width: 2 x 2200 mm • Max. cutting height: 100 mmAdditional equipment • Rear roller table: 3982 mm • Rear support beams: 9 pcs., 40 x 4056 mm • Front air-cushion tables: 2 pcs., 600 x 1800 mm, movable • Front air-cushion table for angle cutting device: 1 pc., 600 x 1400 mm • Left air-cushion angle table: 600 x 1800 mm • Angle ruler: up to 2060 mm • Liftable clamping collets: 9 pcs. • Liftable stop jaws: 2 pcs. • Side pressure: 65–1365 mm, infinitely variable • Automatic angle cutting device • Hydraulic lifting table with roller conveyor • Feed roller conveyor • 4 longitudinal aligners • 4 plate pullers

Condition: ready for operation (used), Year of construction: 1995, This SCHELLING FLM 365.002 panel saw was manufactured in 1995. It features a main saw blade diameter of 400 mm and a scoring saw blade diameter of 200 mm, with a maximum saw blade projection of 80 mm. The machine is capable of processing materials like acrylic and glass-fiber reinforced plastic, with a maximum panel length of 3000 mm and a maximum thickness of 80 mm for acrylic. Consider the opportunity to buy this SCHELLING FLM 365.002 panel saw. Contact us for further details. • Technical data: • Main saw blade diameter: 400 mm • Scoring saw blade diameter: 200 mm • Max. saw blade projection: 80 mm • Max. clamp opening: 100 mm • Max. stack height: 60 mm • Main motor power (50/60 Hz): 15 / 18 kW • Saw unit feed speed: 0.2 – 22 m/min • Saw unit return speed: 22 m/min • Forward feed speed: 10 m/min • Backward feed speed: 10 m/min • Working height: 930 mm • Performance and requirements: • Processable materials: Acrylic, glass-fiber reinforced plastic (GFRP) • Max. panel length: 3000 mm • Max. panel width: 2200 mm • Max. thickness (Acrylic): 80 mm • Max. thickness (GFRP): 60 mm • Edges: deburred • Panel flatness: max. wave 5 mm • Thickness tolerance: ±0.2 mm • Electrical power consumption: approx. 25 kW • Supply voltage: 380 V / 50 Hz • Compressed air requirement: approx. 100 l/min (6 bar) • Extraction requirement: approx. 4000 m³/h (air speed 32 m/s) • Equipment (included with the machine): • Scoring unit • Servo-driven feed (0 – 40 m/min) Gusdpfoyhqlrsx Alfjb • Side guides on roller table, automatic adjustment; adjustment range 80 – 2200 mm • Safety light curtain with separate support frame • Hold-down clamps (according to machine configuration) • Cooling and spraying system • Computer control – COMMANDER (PLC/SPS) with display, membrane keyboard, diagnostic system • Graphical display of cutting plans • Electrical cabinet and control integrated in the machine • Slow scoring / pre-cut function

Condition: ready for operation (used), Year of construction: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. A robust used gluing press, it features a press bed of approximately 2500 x 1300 mm and a stable base frame. It includes a motor-driven multifunctional pusher and an automatic gluing station with a precision glue head. Ideal for both softwood and hardwood, it ensures even pressure distribution and high vertical pressure for low offset. Contact us for more information about this machine. • Workpiece capacity: • Lamella widths (for panels): 30–150 mm • Thicknesses: 11–60 mm • Input length: 800–2500 mm • Panel width: variable, up to max. 1300 mm • Filling width per cycle: min. 650 mm / max. 1300 mm • Max. filling area per cycle: 3.25 m² • Note: Max. usable press width depends on individual lamella widths • In multi-lane operation, filling widths may vary by max. 15 mm • Minimum contact surface per press filling: ≥ 100 cm² • Press performance: • Specific pressing pressure (at 2500 x 60 mm): up to 1.6 N/mm² • Press bed and construction: • Press bed area: approx. 2500 x 1300 mm • Stable base frame with lower press table in stainless steel (ground electrode) • Upper pressure plate with hydraulic motor “anti-reb” feature for high vertical pressure and low offset • Special hydraulic pressure elements ensure even pressure over the joint and compensate tolerances • Quick-change stop ruler sets for panel thicknesses 19–40 mm; hydraulically movable to the current filling width • Integrated hydraulic unit for press force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection value of press (without options): 7 kW • Electrical connection value for 40 kW HF generator: 56 kW • Controls and safety: • Control cabinet and control panel • Protective cover Gsdpfex D I Nrsx Alfoub Additional equipment • Collection table extended to 3700 x 1300 mm (with stainless steel wood support) • Motor-driven multifunctional pusher • Additional individual pressure elements from above • Automatic gluing station with precision glue head • Feed system for different widths • Camera • Washing and rinsing device for glue head • Modem with software for online connection

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, warranty duration: 18 months, input voltage: 240 V, measuring range X-axis: 250 mm, measuring range Z-axis: 320 mm, overall weight: 100 kg, feed length X-axis: 250 mm, feed length Z-axis: 320 mm, Equipment: type plate available, Modular extensible base basic Contour measuring system with down-direction Z-Scanning Anytime optionally via software updatable functions: - Up down measurement - Roughness measurement - Motorized Y-Supporting table - QR-Code Scanner (for tracingarms and reference files) - data export to QS-Stat (dfq file) - dominant waveness Scope of supply: - Basic mechanics with integrated Y-adjustment table (17mm way) - Integrated control system - ConturoMatic Software; manual - PC W11/64Bit; 24"TFT flat screen; - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Technical data: Measuring range 250mm Gedoxgqlhepfx Alfjub Measuring range 320mm Resolution 1nm Sensing system optically incremental Inaccuracy +/-(0,9µm+L/100)µm* [L=mm] Measuring speed 0,1-3mm/s self-optimizing Positioning speed up to 25mm/s Gauging force regulation Table load 35kg Granite precision guides Weight 95kg

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Applications: Guodsxl Dbtspfx Alfob • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Width stop display: Digital Gsdpjvxi Ddefx Alfsub Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3900mm Machine width: 2200mm weight: 1000kg

Condition: excellent (used), RMS Electrodynamic Vibration Test System Vibration Exciter SW 3006+ Power Amplifier TGA 1500 Technical Data: Sine: 3.7 kN Random: 3.7 kN Shock: 3.7 kN Stroke pk-pk: 26 mm Velocity: 0.9 m/s Acceleration: 80 g Gusdpfshyly Rox Alfjb Cooling: air-cooled Condition: used Untested! Testing was not possible Scope of delivery: (see picture) (Changes and errors in the technical data may apply!) We are happy to answer further questions by phone.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 130649, workpiece weight (max.): 400 kg, laser power: 1,800 W, total width: 750 mm, total height: 1,830 mm, total length: 1,200 mm, Fully Working, very good condition. 2013 20W Fibre Laser Gjdpfoyv A I Aex Alfsub work area 112 x 112 mm ( 300 mm max height ) Wave lenght: approx 1064 nm Feel free to ask for more technical details

Condition: used, Year of construction: 2004, Sliding carriage length: 3000 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 170 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilting adjustment: electric Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut ruler display: scale Saw blade diameter: 500 mm Guedpfx Aoyl Tihjlfob Spindle speeds: 4 Motor power: 7.5 kW Extraction port: 80 and 120 mm Machine length: 3600 mm Machine width: 2200 mm Weight: 1200 kg

Condition: good (used), Year of construction: 1993, Würth Fitting Drilling Machine Prebomat II Year of manufacture 1993 Complete in standard configuration with: Fully automatic pneumatic control in accordance with GS test, Gedpfx Asymynyelfoub Oil brake and return stroke limiter for line boring, Electrical skip operation Motor 0.75 KW, 400 V, 1 stop ruler 900 mm 2 extension rulers from 1.25 m to 2.5 m 4 swivel stops Worktable 1000 x 430 mm 4-spindle drilling head with pressure lever Pitch 25/5.5/32 mm 7-spindle drilling head for line boring, pitch 32 mm with integrated indexing pins

Year of construction: 2011, condition: used, functionality: fully functional, Universal Testing Machine Inspekt Table Blue 5 kN Gedpfjyyu I Njx Alfeub Mechanical Design: - 2 backlash-free ball screw spindles, driven by a DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm - 1 test space up to nominal load: - Test space width: 420 mm - Max. test stroke without test tools, adapters, and KMZ: 1025 mm Travel Speeds: - Test speed: 0.0015 – 1000 mm/min at full load - Return speed: 1000 mm/min Force Measurement: - Measuring range: 0.8 – 100% of nominal load, Class 1 (optionally Class 0.5) (+/- 1% of the displayed value according to DIN EN ISO 7500-1) - Force measurement resolution: +/-180,000 digits at 20 ms integration time The machine is delivered with a factory test certificate. If factory or DKD calibration at the installation site is requested by the customer, this will incur additional costs. Crosshead Travel Measurement: - Incremental square-wave input with encoder monitoring, saves crosshead position - Crosshead travel resolution: 1 μm Dimensions (W x D x H) / Weight: - Load frame: 685 mm x 550 mm x 1420 mm / 100 kg – controller mounted on the load frame Standard Functions: - Force, displacement, and strain control - Overload protection, automatic force calibration - Specimen break detector, return function - Set-up mode via control panel with display (force, displacement) Data Processing: - USB 2.0 interface or LAN - Data transfer rate to PC: 50 Hz (standard); optionally, higher data acquisition frequency via special software add-on module - Internal data processing rate: 2 ms - Optional: up to 2 free slots for expansion cards (1-channel analog cards or 2-channel digital cards) for additional sensors Power Supply / Operating Conditions: - 115/230 VAC, 0.5 kVA, 50/60 Hz, 5–40°C, 20–80% humidity - Required options for operation: load cell, grips, PC (current standard, OS 8-10-11), test software 5000 N Load Cell - Measuring range: 5–5000 N for tension and compression, with nominal 2 mV/V output signal - Overload protection: +/-100% - Linearity: +/-0.05% - Hysteresis: +/-0.03% - Repeatability: +/-0.02% - Incl. 1.5 m connection cable and calibration certificate Supplied with Extensometer MFX 200 The MFX 200-B extensometer, with its robust construction and high measurement accuracy, is suitable for almost all specimens with an initial gauge length from 10 mm. All strains can be measured, from the modulus of elasticity up to specimen break. It can be used unrestrictedly in both the lower and upper test areas. In combination with the MFQ-A, r- and n-value measurements on sheet metal are also possible. Two different measurement systems are available, differing in their signal and technical specifications (see technical documentation).

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: mechanical, working width: 3,060 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 41 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, Standard Features ELGO P40T CNC control unit Robust, welded and monolithic frame structure providing maximum cutting precision NC-controlled, motorized 750 mm backgauge system Upper blade: double-edged; lower blade: four-edged, manufactured from high-alloy steel Mechanical hold-down system to prevent sheet slippage during cutting Easily adjustable blade clearance system Ball transfer front support table Gsdpfjyg Ic Eex Alfjub Front support arms with ruler Cutting line illumination system Finger protection system Foot pedal Rear protective cages Emergency stop button Optional Features 1,000 mm backgauge system Rear sheet support and sheet sliding system for easy positioning and transfer of sheets to the rear System for dropping cut pieces to the front Adjustable front angle gauge 0–180° Front support arms available in custom lengths upon request Manual 750 mm backgauge with front-adjustable handwheel system Rear safety light barrier Technical Specifications Machine Type: A04/3060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 3,060 mm Cutting Angle: 1.3° Cutting Speed: 41 strokes per minute Table Length (C): 800 mm Machine Dimensions (L × W × H): 3,600 × 2,250 × 1,400 mm Motor Power: 7.5 kW Weight: 4,000 kg

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler Gusdpfx Asg Db U Ajlfsb central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, operating hours: 4,452 h, cutting height (max.): 120 mm, cutting depth: 340 mm, main saw diameter: 380 mm, Raimann KR 310 E 340/120 multi-saw with movable disc - manufactured in Germany - year of manufacture 1990 - DTR - number of hours 4452 h Guodpfx Aljrhig Eofsb TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum length of the element 700 mm - width of table 740 mm - feed regulated on inverter 6-48 m/min - three rows of pawls - possibility to mount a bush - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electrical adjustment of cutting height - electrical adjustment of shaft height - four top pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Overall dimensions of the machine 250x200x220 cm weight 2000 kg

Condition: used, mileage: 41,682 km, power: 115 kW (156.36 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 7,260 kg, maximum load weight: 230 kg, overall weight: 7,490 kg, wheelbase: 3,700 mm, fuel: diesel, color: blue, driver cabin: other, gearing type: other, emission class: euro5, suspension: other, number of seats: 3, total length: 6,215 mm, Year of construction: 2011, construction height: 2,970 mm, Equipment: parking heater, trailer coupling, Body variant: high roof, heated exterior mirrors, wing doors (opening angle 270 degrees), sliding door on the right-hand side of the cargo area, side collision protection, fog lights, rear fog lights, reversing lights, seats in the driver's cab: double passenger seat, anti-lock braking system (ABS), disc brake on the front axle, disc brake on the rear axle, axle load on the front axle 2.5 t, hydraulic steering, battery 74 Ah, 6-speed gearbox, fuel tank: 90 litres, permissible Total weight 7.49 t, Drive type: rear-wheel drive, Body/structure: high-space box, Driver's cab: basic, Suspension: leaf / leaf, Engine 4.3 ltr. - 115 kW Diesel (OM 904 LA), power steering, emission standard EURO 5, wheelbase 3700 mm, trailer coupling: ball head, generator 100 A, trailer socket 13-pin, windscreen tinted, sliding door loading area left, heat-insulating glazing, airbag driver's side Tires: 205/75R17.5 124/122M Goodyear M+S, rotating beacons round speed cameras, auxiliary heating Webasto, reflective warning strips, vehicle interior fittings control room, weather protection aluminum flap foldable up, lifting and lowering device with electric chain hoist, intercom, rear surveillance camera, Water tank approx. 90 liters with pump, control panel coded/ semi-professional, control panel extension for EX protection testing, rear area control, EDP mixer type SG-KST, slip ring cable reel 20 BSR, special camera cable 400m, camera trolley "Turbo 2", rotating and swivel head camera type "RZL-LED", rear area monitor, battery unit 24V/ 675Ah, battery charger, sine voltage converter output 24V/ 1600W, temperature and inclination measurement in the camera trolley Turbo 2, radio accessories, digital tachograph, vehicle TV system JT-elektonik GmbH: MB Vario 816 KA for examinations from DN 200mm - DN 1800/2000mm Godpjr Uzn Djfx Alfoub Only sold to tradespeople (agriculture, freelancers, small and large businesses) or export. Subject to error and prior sale

Condition: new, Year of construction: 2025, grinding wheel width: 480 mm, grinding wheel diameter: 720 mm, Workpiece diameter 1 - 300 mm, diam. grinding wheel max 725 mm, SS width 300-380 mm, weight basic machine approx. 13,5 to, drive power max. 100 kW. Gujdpfx Ajdld T Rolfjb Centerless grinding machine for through-feed and plunge-cut grinding, fixed grinding center, grinding wheel diam. 725 mm for highest lifetime and productivity, especially with conventional grinding wheels, hydrostatic grinding wheels, hydrostatic guideways for highest accuracy for grinding and regulating slides, Direct drive via servo motors for grinding and regulating slides, dresser with separate slide for copying ruler and servo contour, height adjustment of the guide rail via servo motor, thus easy and quick changeover possible.

Condition: new, saw blade diameter 550 mm Number of revolutions 3580 r.p.m hole of sawblade 32 mm Control NC total power requirement 3 kW weight of the machine ca. 250 kg required space 980 x 1130 x 1430 mm The Gerd Wolff AC 550 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Schnittbereich 90° rund: 155 mm Schnittbereich 90° quadratisch: 155 x 155 mm Schnittbereich 90° rechteckig: 260 x 200 mm Schnittbereich 45° rund: 130 mm Schnittbereich 45° quadratisch: 130 x 130 mm Schnittbereich 45° rechteckig: 180 x 200 mm Standard Accessories - Location points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps Gedpfsymf Tbox Alfsub - 1 x compressed air gun Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: excellent (used), functionality: fully functional, Model Jufeba LN-2 Gusdpfxem Tr E Sj Alfob with salt wave pretzel maker salt drip tray Output up to max. 200 pieces/hour stainless steel version Dimensions: 820 x 870 x 800 mm, WxDxH Connection 400V, 7.3 kW, 16A-CEE plug Used device cleaned with 6 months warranty We have a TOP selection of bakery machines!

Condition: excellent (used), Bandsaw with feed MEBER SR - after the technical review - in good condition - Italian production Guodpfx Aofwl Uaelfsb TECHNICAL PARAMETERS: 4 kW main engine wheel diameter 800 mm cutting height 420 mm maximum width of the cut material 780 mm cutting width at the ruler of 575 mm cutting width with rolls 195 mm maximum width of the material cut with a feed 355 mm cutting band width max 40 mm feed speed adjustable on the inverter feed speed range 0-12.5 m / min height of the feed roller 140 mm pneumatic feed pressure upper and lower belt guides 0.75 kW feed motor stub diameter 100 mm dimensions (length / width / height) 260 x 165 x 115 cm weight 700 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, - Conforms to CE standards Guodpjrbiv Ajfx Alfeb - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top presses and blade movement is pneumatic - There is a mm ruler system for the height and advancement of the blades. - Centering miter wedge is automatic - Drain button available for fine adjustment - Pneumatic presses use 2 pedals to squeeze the profile - Profile surfaces are polyamide sheet to prevent damage - Side support arms available

Condition: used, Year of construction: 2007, SCHNEEBERGER - DMR GEMINI - 2007 5-axis CNC tool grinder GEMINY-DMR Geminy 71 DMR + profile grinder Manufacturer: SCHNEEBERGER Year of manufacture: 2007 Technical data of grinders: X-axis - longitudinal slide, stroke 360 ​​mm Y-axis - vertical slide, stroke 270 mm Z-axis - transverse slide, stroke 270mm A-axis -axis for grinding on round, max. rpm 800 rpm C-axis – grinding spindle, 370° rotation, 15 kW, adjustable speed 500-1000 rpm Grinding machine equipment: Control system: Fanuc 310iA5 Standard software for the production and grinding of tools for mechanical engineering Guedoyl Shcjpfx Alfob Automatic central lubrication Automatic fire extinguishing system Hydraulic workpiece clamping Electrostatic vapor separator Measuring probes Hydraulic workpiece clamping In addition to the standard equipment, both grinders also have special accessories: -UPP-Ultra Precision Package-linear rulers 0.1 micron for the X, Y axes -grinding spindle motor 15 kW -OPC-Optical Profile Control-camera on the grinding spindle-integrated video coordinate system in the machine for measuring the profile of pre-ground and ground tools. -QUINTO- profile tools dxQ /CAD/CAM/-special program for grinding profile tools. This program, together with OPC, allows you to produce PROFILE TOOLS on grinders - it combines two types of machines into one: a profile grinder /e.g. PTW, AMADA/ and a 5-axis CNC tool grinder, which greatly expands the possibilities of using these machines. -Round grinding machine - a fixture for round grinding with a continuously programmable servo motor. With this software and cameras, we have a classic 5-axis CNC grinder + profile grinder and we have greatly expanded our production capabilities and the ability to reach a much larger range of customers. So we have two grinders in one machine - a toolmaker 5-axis CNC grinder and a profile grinder.

Condition: used, Year of construction: 2003, TRUMPF - TRUMATIC 5000R - 2003 - software WIN NT - 220 kN punching press - moves 3125x1650 mm Guodeyl I T Uspfx Alfsb - max 6,4 mm sheet thickness - linear ATC for 21 tools (1600) + 4 sheet holders - tool holders (casettes) - weight appr. 17500 kg - tool holders - used condition as showed on photos - regularly maintained - sheet holders 4 - weight appr. 17500 kg - OPTIONS: MULTITOOL (5, 10 places) THREADING / Gewindeschneiden ENGRAVING / Gravieren SIGN / Signieren HANDLING ROLLING TOOLS / Umgang mit Rollwerkzeuge REPOSITIONING CYLINDER / Nachsetzzylinder - sheet waving monitoring - used condition - regularly maintained, good condition: NEW X axis NEW PARTS UNDER HEAD - due to informations LINEAR AMPLIFIER was changed in arround 2019 - short video available - in our warehouse, dismantled, not under power

Condition: good (used), Magnetic plate, magnetic table, sine table, sine plate, relief grinding device, grinding machine accessories Guodpfjb A Iqdox Alfeb -Design: Cutting tool mold making for conically ground cutting plates or mold inserts -Angle head for surface grinding machine or measuring machine -Magnetic plate -Angle: adjustable -Wooden box -Total weight with box: 35 kg