Used Sine Wave Ruler for sale (398)

Condition: used, Year of construction: 2005, power: 7.5 kW (10.20 HP), cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,500 kg, Equipment: CE marking, No. 04528 Sliding table saw Martin T 73 BASIC Used, year of construction 2005 Sliding table 3000 mm Maximum cutting height 170 mm Iasdpfeyymtdex Amyet Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Circular saw ruler can be lowered Pneumatic saw shaft lock Cross table with fixed angle adjustment Length stop extendable up to 3300 mm Sliding table with stepless locking Integrated contact for controlling the dust extraction system Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no Ijdpfxevi H Dij Amyoat 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Iodpfjh Aw Rnox Amyeat Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: new, Year of construction: 2025, Lock former machine LFM is the one that is most required beyond our customers. It is used for forming ventilation locks such as Pittsburgh lock, standing seam lock, single hem, double hem, locking pin, elbow radius element. Those locks are widely used when construction process of different industrial and civil buildings. Iaedpef Epzcefx Amyst The advantage of our lock former machine compared to others machine is possibility to form pipe lock so you can use it while round pipes production. So our customers can save money on purchasing additional equipment and renting additional production areas. There are 7 pairs of forming rolls on the LFM machine to form different ventilation locks. Forming rolls are tempered so they have long life period. The process of ventilation element production is started from Pittsburgh lock forming process and single hem forming process with the lock forming machine LFM. After the process of locks forming are finished it’s necessary to put single hem lock into Pittsburgh lock and close it with a hummer or special Pittsburgh lock closing machine. After those procedures ventilation element is ready It’s very easy to work with our ventilation lock former machine LFM, because there are ruler guides so they help you to put metal in necessary forming position. Lock former machine LFM can be 380V (1.5kW engine power) or 220V (1.1-1.5kW engine power) depends on customer’s preferences. The machine is suited to work with color-coated metal sheets or stainless steel. We have been producing lock forming ventilation machines since 2008 year. So we have ready solutions for you to be the first Dimension: 110.00Sm x 51.00Sm x 100.00Sm Weight: 300.00Kg Maximum metal thickness: 1.2mm

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 1,600 rpm, travel distance X-axis: 368 mm, travel distance Z-axis: 2,900 mm, total height: 1,925 mm, total width: 1,525 mm, overall weight: 3,820 kg, product length (max.): 5,278 mm, number of axes: 2, Horizontal turning machine manufactured in 2022. This Optimum OptiTurn TH 8030D features a maximum swing diameter of 800 mm and a turning length of 250 mm. It includes a robust spindle chuck and a rapid motion speed of 3800 mm/min. If you are looking to get high-quality turning capabilities, consider the Optimum OptiTurn TH 8030D machine we have for sale. Contact us for further details regarding this machine. • Type and highlights • Leading and traction spindle lathe, high flexibility, precision and cost-effectiveness • With digital position indicator prepared (see Additional equipment) and quick-change steel holder (see Additional equipment) • Shipping information • Packaging metrics: Length 4770 mm, Width 1150 mm, Height 1840 mm • Weights: Gross 4480 kg, Net 3870 kg • Technical data • Load bearing capacity 1,4 t/m • Work areas: • Max. height 400 mm • Swing diameter above machine bed 800 mm • Swing diameter above planing slide 570 mm • Bed width 400 m • Max. width 3050 mm • Swing diameter in bed bridge 1035 mm • Turning length in bed bridge 250 mm • Speed range: • Number of gears 16 • Fast motion speed: • Rapid motion speed 3800 mm/min • Explanations about rapid motion max. 5 min (30 min. break) • Electrical data: • Drive motor output 11 kW • Supply voltage 400 V • Mains frequency 50 Hz • Electrical connections: Total rated value 12 kW • Cooling lubricant system: • Coolant pump output 150 W • Spindle: • Spindle chuck Camlock DIN ISO 702-2 No. 8 • Spindle bore/rod passage diameter 105 mm • Spindle cone Ø113 (cone 1:20) mm • Tool holder max. chuck height 32 mm • Tailstock: • Tailstock chuck MK 5 • Tailstock quill stroke 235 mm • Tailstock quill diameter 90 m • Pitches: • Metric pitch 0,45 – 120 mm/rev (54 pitches) • Imperial pitch 80 – 7/16 Gg/1" (60 pitches) • Diametrical pitch 7/8 – 160 (42 pitches) Iedpfxjyxncds Amyeat • Modular thread pitch 0,25 – 60 mm/rev (46 pitches) • Travel: • Travel upper slide 230 mm • Travel carriage saddle 2900 mm • Travel cross slide 368 mm • Feed: • Longitudinal feed range 0,044 – 1,48 mm/rev (25 feeds) • Flat feed range 0,022 – 0,74 mm/rev (25 feeds) • Design features and safety • Hardened and ground Z-axis guideway • Spindle mount Camlock DIN ISO 702-2 No. 8 • Precisely crafted sled; all guides adjustable by wedge strips • Adjustment range upper slide ± 90° • Guaranteed concentricity of the spindle nose better than 0.015 mm • Waves, wheels and main spindle running in oil bath • Gear wheels smooth, hardened and ground with 2 adjustable precision tapered roller bearings • Clear selection lever for switching the feed rates • Closed design of the rapid-action feed gear • Gears and shafts hardened and ground in an oil bath in precision bearings • Handwheels decoupled and tested according to EN 23125 • Two-channel right-left switch tested to EN 23125 • Switch with life cycle calculation, tested according to EN ISO 13849 • Right/left rotation on bed carriage via switching spindle switchable • Central lubrication in the bed slide • Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN • Leading spindle • Emergency stop blow switch, motor protection switch, lockable main switch • Emergency stop device with foot control • Safety handwheels with release function in the X-axis • Handwheels with adjustable fine scale 0.04 / 0.02 mm • Tailstock for taper turning ± 10 mm adjustable • Tailstock quill and handwheel with adjustable fine scaling

Condition: used, Year of construction: 1968, grinding length 500 mm grinding width 200 mm workpiece height 250 mm turning speeds 1000 - 4000 U/min table surface area 600 x 200 mm grinding wheel size 225 x 20 x 51 mm grinding spindle drive 1,5 kW table feed 1 - 20 m/min total power requirement 2,6 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,6 x 1,6 x 1,8 m Iajdpfswuuwyex Amyet Automatic feed; 2-axis digital display; stepless speed control; Water-cooled sine angle magnetic clamping plate 400x135mm; 10mm magnetic pitch Sony digital display with scales for transverse and height adjustment Swing-out dresser on the grinding head Table direction reversal with contactless inductive switches LOSMA belt filter coolant system

Condition: used, FANUC Robocut C 600 iA is a wire cutting EDM designed for precision, high accuracy and reliability. Working table 600×400 mm; max workpiece 1050×820×300 mm; table load 1000 kg; travels X600 Y400 Z310 U200 V200; wire from 0.1 mm. Power supply 50 Hz 3x 400 V; total power 11 kVA; machine weight ~1500 kg; overall 1800×1600×2000 mm. Accessories: lamp, automatic wire threading, Daikin cooling unit, automatic sliding door, glass rulers X,Y, rotating spindle Hirschmann F. Enables tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Ijdpfx Ajyxprtomyjat

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 20518, We offer this used Schmidler S4 carpentry machine, year of manufacture 2000. Manufacturer: Schmidler Model: S4 Year of manufacture: 2000 Machine type: carpentry machine - 4-strand cross conveyor (inclined, ascending) - Infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cut-off saw - Saw blade diameter: 710mm - Swivel angle: 360 degrees - Tilt: 0-65 degrees - Scrap wood pusher - Marking pin horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Powered outfeed roller conveyor - Pneumatic push ruler - Transport & measuring system - Conveyor belts need to be replaced - Controls: sema btl Maximum workpiece dimensions: Height: 300mm Width: 400mm Total length: approx. 21m Infeed roller conveyor Outfeed roller conveyor with push ruler and deposit rods Machine used, operational. Conveyor belts need replacement. Machine can be viewed by appointment. Available immediately. If you have any questions or would like more information, feel free to send us a message or call us. Iedpfx Asy Ewxzomyeat

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 50 mm -Transport width: approx. 500 mm -Wave: Dimensions see photos -Quantity: 118x transport rollers available -Price: per piece -Overall dimensions: Ø 50 x 540 mm Iaodpjyw Il Aefx Amyet -Weight: 1.3 kg/piece

Condition: excellent (used), functionality: fully functional, KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE MODEL: 1000 U YEAR OF MANUFACTURE: 2000 PARTIAL OVERHAUL: 2026 Centre height: 175 mm Grinding length: 1000 mm Equipment: - Standard accessories - Standard workpiece headstock MK5 with adapter flange DIN 55027, size 5 - Splash guard hood for the above - Tailstock with fine adjustment, MK4 - Internal grinding attachment with protective cover for grinding spindle D:80 mm for belt-driven spindles - FISCHER internal grinding spindle type HJN 842, incl. grinding mandrels (4 pieces, choice) - HJNZ 42 collet chuck - Oil mist lubricator for HJN spindles - STREULI magnetic paper band filter system, type: SPB 2 - Coolant supply through the workpiece spindle - HEIDENHAIN digital length measuring system on X and Z axes - Sine bar on the workpiece headstock incl. alignment arbor MK5 - Permanent magnetic chuck, D:200 mm - Three-jaw chuck, D:160 mm - Four-jaw chuck, D:160 mm - Collet attachment for Schaublin collets B32 - Set of B32 collets, D: 1.0–30.0 mm, increment 0.5 mm (59 pieces) - Dial indicator stop for table swivel with indicator 0.01 mm - Table fixed stop - Dressing stop for internal grinding - LED machine lamp - Various grinding wheel flanges, left (2 pieces) - Pneumatic table load relief - Swiveling dressing device for external, face, or internal grinding operations - Set of vibration damping pads Iaedpfx Aoyf E Sujmyst - New three-color paint finish (light grey RAL 7035 / blue RAL 5012 / dark grey RAL 7016) - New acceptance protocol according to KELLENBERGER standard - Documentation - CE conformity The machine is currently being overhauled, sample photos shown!

Condition: used, mileage: 55,315 km, power: 210 kW (285.52 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2022, next inspection (TÜV): 01/2025, color: beige, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, soot filter, Mileage varies, vehicle is still in use----Special equipment: Iasdpfxjvht Tne Amyet Roof rails, Black Style Design Package, Plus Driver Assistance Package, fire extinguisher, head-up display, Innovision Cockpit (digital instruments and operation via touchscreen color display), Climatronic 4-zone air conditioning, Comfort Package Keyless Access, Savona leather package and ErgoComfort front seats, LM wheels 9.5x21 (Suzuka, black), electronically controlled air suspension with adaptive roll stabilization, Matrix LED headlights (high-tech), Premium Memory Package, Mobile Online Services Car-Net, front panoramic sliding/tilting sunroof electric, with rear panoramic roof, smoker's package, tire pressure monitoring system (regular and winter tires), laminated glass side and rear windows, rear tinted, front seats with climate and massage function, special paint Sechura Beige Metallic, sunshade blinds on rear door windows, auxiliary heater with auxiliary ventilation (remote control and timer), variable load floor, additional winter tires (customer specification required) Other equipment: Cornering and all-weather lights / bad weather lights, driver/passenger airbag, deactivatable passenger airbag, white ambient lighting, Discover Premium audio navigation system (with hard drive storage), R-Line equipment, automatic headlight control (ALS) with leaving home/coming home light function, exterior mirrors electrically adjustable, heated and foldable, roof lining fabric, black, double sun visors with mirrors (illuminated), double-tone horn, assistance system: automatic distance control (ACC incl. stop & go function), assistance system: driving profile selection, assistance system: high beam control (Light Assist), assistance system: pedestrian recognition, assistance system: fatigue detection sensor, assistance system: park assist (Park Assist), assistance system: lane keeping assist (Lane Assist), assistance system: environment monitoring system (Front Assist) with city emergency braking function, assistance system: traffic sign recognition, electric windows front and rear, front camera (multifunction camera windshield), laminated glass windshield tinted, textile floor mats, vehicle without hybrid, enlarged urea tank (AdBlue), interior trim: aluminum wave inserts, interior filter: dust and pollen filter with activated carbon filter, Isofix mounts for child seats in rear seats (incl. i-Size child seats), body: 5-door, front and rear head airbag system incl. front side airbag, loading edge protection (stainless steel), speakers (8), lumbar supports front, electrically adjustable, heated steering wheel (leather, R-Line) with multifunction and shift function, rear center armrest, engine 3.0 liters - 210 kW V6 TDI, rear fog light, emergency call system, electric parking brake, stainless steel pedals, R-Line, R-Line package, radio reception digital (DAB+), wheelbase 2904 mm, tire repair kit, tire pressure display, rear view camera (Rear View), rear seat split/foldable and slidable, low-emission according to Euro 6d emission standard, heated washer nozzles, SCR system (AdBlue technology), front side airbag, rear outer seat belts with belt tensioners, front seat belts with belt tensioners, height adjustable, front seats electrically adjustable, front ErgoComfort seats, front seats height adjustable, front seat heating, differential lock, start/stop system, R-Line bumpers, lower door trim in body color, exterior door handles in body color, first-aid kit and warning triangle, seat

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, hole spacing: 32 mm, Ganner Gannomat belt and line boring machine Blum and Grass drill head 7 Spindle row hole drilling head incl. extension rulers 32 mm system pneumatic version Ijdpfx Aeq E Ur Asmyeat

Condition: excellent (used), Year of construction: 2014, Motor power: 7.5 HP (5.5 kW) Motor voltage: 400 V (50Hz) Planing width: 410 mm Planing shaft: 4-blade field system planing shaft No. of planing knives: 4 Planer table length: 2,200 mm Planer fence: 1,300 x 170 mm Chip removal: 5 mm Suction connection: 120 mm Weight: 510 kg Dressing guard EURO Standard Standard equipment - Planing shaft with 410 mm planing width - Infeed planer table with table length 1080 mm - Jointer fence with ruler 1300 x 170 mm - EURO Standard planer guard - 4-blade field system planing shaft Location: ex stock 54634 Bitburg - immediately available - Iaedpfxeh Hp Hye Amyot

Condition: used, mileage: 1,49,050 km, power: 130 kW (176.75 HP), first registration: 09/2019, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 3,350 mm, loading space width: 1,780 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 8210X ----Why autonext GmbH? One of the largest commercial vehicle showrooms in Germany. Always over 400 vehicles immediately available at the best price with the largest selection. More than 1,000 satisfied customers per year – top customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----1st owner, German vehicle, non-smoker vehicle Full service history exclusively at Volkswagen All-wheel drive 4MOTION Tow bar, increased towing capacity 3,000 kg Inverter in load compartment (PURE SINE INVERTER) 230V socket (in load compartment and passenger compartment) Rear view camera Front and rear parking sensors with active side protection Rear cross traffic alert Discover Media audio navigation system Navigation system Climatic air conditioning (cab) Blind Spot Sensor / Lane Change Assist Blind Spot Assist Rear access step ---- Special equipment: * Storage Package 2 * Storage: 2-DIN compartment front below roof lining * Interior lights in cab: front reading lamp * Tow bar: fixed ball head * Trailer stabilization program * Discover Media audio navigation system (touchscreen color display) * Voice control system * Multimedia interface USB (iPhone / iPod) with AUX-IN * Volkswagen Media Control and App-Connect * Lockable glove compartment * Driver assistance system: front and rear parking sensors with active side protection and lane change assist (Side Assist) * Exterior mirrors electrically adjustable, heated, and folding * Driver assistance system: Lane change assist (Side Assist / Blind Spot Sensor) * Driver assistance system: Rear cross traffic alert * Driver assistance system: front and rear parking sensors with active side protection * Driver assistance system: front and rear parking sensors * Rain sensor * Automatic headlight control * Light assistant (Coming Home, Leaving Home) * Spare wheel with road tires incl. on-board tools and jack * On-board tools and jack Isdpfjxrxtdjx Amyjat * Driver/passenger airbag, passenger airbag deactivatable * Load compartment floor: universal wooden floor with transverse adjustable lashing rails * Chassis: reinforced suspension and stabilizers front and rear * Remote control keys (2), folding * Cab floor mats: rubber * Vehicle without lashing rings * Rear wing doors with glazing * Climatic air conditioning (cab) * Paintwork: pearl effect finish * Partition with window * Side marker lights * Rotating beacon lights (2) front and rear * Rear view camera * Cab seats: dual passenger seat with storage/compartment and backrest foldable as storage table * Cab seats: comfort driver’s seat * Overcab storage compartment (accessible from load area) * 230V socket in cab * Sockets (12V connection) in load/passenger compartment (2 units) * Rear step right * Trim in load/passenger compartment: half-height plastic * Lashing rails in load compartment – on partition Standard equipment: Anti-lock braking system (ABS), Drive type: all-wheel drive, Exterior mirror convex, left, Exterior mirror convex, right, LED turn signals integrated into exterior mirrors, Cab floor covering: rubber, Drag coefficient underbody panel, Twin headlights, Grab handle on rear left pillar, Grab handle on rear right pillar, Electronic Stability Program (ESP), Driver assistance system: Hill Hold Assist, Driver assistance system: Brake Assist (HBA), Driver assistance sy...

Condition: like new (used), Year of construction: 2022, functionality: fully functional, 1. Automatic Textile Printing Machine VERSATRONIC S-line Iaodpfx Amev Ng T Reyst 🔹 Configuration: • 8 stations/pallets • 6 printing heads • Maximum print area: 400 x 450 mm • Pallet drive: frequency-controlled AC servo drive 🔹 Squeegee-drive system: • AC servo high-precision drive • 4-cylinder POWER-Squeegee system 🔹 Main Control Unit: • Rotatable control panel with 7” SMART touch display • Microprocessor with diagnostic program 🔹 Printing Programs: ✅ 6 standard printing programs ✅ High-density program ✅ MULTIFLASH program ✅ Cool-stop mode ✅ Sampling program ✅ Start-up/finishing program ✅ Screen-Cleaning mode, stopping pallets between print stations Fobqfb Ijv Ng T Reitjgf ✅ Free-wheel-mode _____ 2. Accessories • 8 pcs aluminum sandwich pallets 420 x 500 mm with neck • 8 pcs aluminum sandwich pallets 320 x 500 mm with neck • 8 pcs aluminum sandwich pallets 230 x 500 mm with neck • 8 pcs aluminum sandwich pallets 130 x 500 mm without neck • 6 pcs QS-printing squeegees 410 mm, 65° Shore • 6 pcs QS-printing squeegees 310 mm, 65° Shore • 6 pcs QS-printing squeegees 210 mm, 65° Shore • 6 pcs QS-printing squeegees 120 mm, 65° Shore • 6 pcs aluminum flood bars 410 mm • 1 pcs squeegee holder for wall mounting • 6 pcs micro-registration systems with control on each printing head • 6 pcs 3-point pneumatic screen-locks 🔹 Machine Dimensions: • For a print size of 400 x 450 mm, a frame of 530 x 780 mm is required (profile: 25x25/30x30 mm) • Machine diameter: 3.080 mm 🔹 Energy Requirements: • Power supply: 3x400V V, PEN, 3.7 kW, 5.6 A • Compressed air: 8 bar, approximately 300 liters/hour 🔹 Transport Dimensions: • S-LINE 8: • Gross weight: approximately 900 kg _____ possible to buy to the additionaly: 3.1 Automatic Quartz-flashcure MAGIC 5025 • Medium-wave IR radiators • Radiation area: 500 x 500 mm • With IR-Pyrometer for continuous measurement of print material temperature • Ensures constant temperature throughout the printing process, preventing overheating of textiles and pallets • Power supply: 9 kW, 14 A, 3x400V • Movable stand with wheels + 2500,- € + VAT

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Ijdpfxoy A D Ecj Amyeat Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,030 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, TECHNICAL DATA - Demonstration machine from showroom Roll carriage length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90° / 105 mm at 46° Cutting width width stop 1030 mm Saw blade max. Ø 450 mm Saw blade can be lowered under table Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus 750 x 655 mm Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1051 kg TECHNICAL DESCRIPTION Solid German engineering For trimming, cutting to length, sizing, mitre cutting etc. Dimensionally stable and self-supporting machine body manufactured as a stable welded frame construction made of thick-walled steel profiles, laser-machined sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is mounted on the machine body The robust and powerful saw unit installed in the machine frame guarantees precise saw cuts The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the entire length, guided by hardened and and ground round steel guides with remote locking at 50 mm intervals Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening Extendable up to 250 mm on the wide side Length stop on the cross slide with mm scale and telescopic extension, extendable up to 3500 mm; with 2 robust and backlash-free Isdsgz Hx Dspfx Amysat sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre stop on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) are can be quickly set via a fixing system Width stop with cutting width 1030 mm to the right of the saw blade with fine adjustment, easy to adjust and fix manually, dimension display via easy-to-read mm measuring scale on adjustable ruler holder Table extension 1200 x 600 mm and table extension 750 x 655 mm Operation on the machine body with 4.3" touchscreen control for cutting height, swivel adjustment and speed Electromotive height and tilt adjustment via touch button Swivel range of the saw blade from 0° - 46 APA saw blade quick clamping system Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Safety guard can be swiveled to both sides, safety hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400 mm can be lowered under the table Extraction nozzle Ø 120 mm on the machine body, Ø 80 mm on the protective hood Roller carriage, length and width stop profile anodized CE-compliant GS tested

Condition: new, Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 410 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,850 mm, TECHNICAL DATA Planing width 410 mm Feed table length 1620 mm Feed table length 1170 mm Total table length 2850 mm Iedpfx Amjqk Ulueysat Cutterblock speed 5000 rpm Suction nozzle Ø 160 mm chip removal up to 8 mm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 870 kg TECHNICAL DESCRIPTION Solid German engineering For planing and jointing incl. hollow and pointed joint adjustment for planing width up to 630 mm and max. chip removal up to 8 mm Ergonomic working position directly on the cutterhead PANHANS solid steel cutterblock ø 125 mm with 4 Tersa reversible knives Finely planed machine tables, total table length 2850 mm Top control panel at eye level with digital display of chip removal, current delivery table situation (neutral, hollow or pointed joint), incl. template holder and practical tool tray Electromotive adjustment of the feed table via push-button Hollow and pointed joint adjustment on the feed table Toothed table lips for noise reduction Dressing fence Adjustable in depth and inclination via single-lever operation, inclinable up to 45°, mounted in extremely smooth-running steel guide Anodized dressing fence ruler Pivoting auxiliary fence 1545 Console for feed unit TXF 1570 bridge guard with hinged cover Mechanical motor brake Automatic star-delta start, motor protection switch Planed in at the factory CE-compliant GS tested

Condition: new, Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,850 mm, TECHNICAL DATA Planing width 630 mm Feed table length 1620 mm Feed table length 1170 mm Total table length 2850 mm Iaedpoqffvgofx Amyot Cutterblock speed 5000 rpm Extraction nozzle Ø 160 mm chip removal up to 8 mm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 1400 kg TECHNICAL DESCRIPTION Solid German engineering For planing and jointing incl. hollow and pointed joint adjustment for planing width up to 630 mm and max. chip removal up to 8 mm Ergonomic working position directly on the cutterhead PANHANS solid steel cutterblock ø 125 mm with 4 Tersa reversible knives Finely planed machine tables, total table length 2850 mm Top control panel at eye level with digital display of chip removal, current delivery table situation (neutral, hollow or pointed joint), incl. template holder and practical tool tray Electromotive adjustment of the feed table via push-button Hollow and pointed joint adjustment on the feed table Toothed table lips for noise reduction Dressing fence Adjustable in depth and inclination via single-lever operation, inclinable up to 45°, mounted in extremely smooth-running steel guide Anodized dressing fence ruler Pivoting auxiliary fence 1545 Console for feed unit TXF 1570 bridge guard with hinged cover Mechanical motor brake Automatic star-delta start, motor protection switch Planed in at the factory CE-compliant GS tested

Year of construction: 2018, condition: ready for operation (used), An optical inspection machine Göpel for the inspection of THT components, THT solder joints and wave-soldered SMD components is available. Component clearance: 120mm, max. component height top/bottom: 80mm/10mm, max. inspection dimensions X/Y: 540mm/450mm, max. workpiece dimensions X/Y: 620mm/510mm, inspection speed: approx. 100cm²/s, machine dimensions X/Y/Z: approx. 1200mm/1400mm/1800mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible. Iaedpfxoy Aaflj Amyst

Condition: new, Year of construction: 2025, Panhans BSB 800 band sawing machine TECHNICAL DESCRIPTION Solid German machine construction Machine stand in shapely modern design torsion-free double-chamber welded steel construction Upper and lower door secured by limit switches Upper and lower precision band saw blade guide APA 2, size 2 Finely planed gray cast iron table Swivel table top up to 45 Dyn. balanced band saw wheels with vulcanized rubber bandages Stop ruler can be used to the left of the saw blade, Fence profile can be reversed Blade tension indicator 1 piece saw blade5775 x 30 x 0.8 mm, tooth width9 mm, No. 3780.301 Mechanical height adjustment of the saw blade guard by hand wheel with locking pinion Rotary cam switch with star-delta start and emergency stop button Mechanical motor brake with main switch and motor protection relay CE-compliant Iedpfxer Igzco Amysat GS tested Left-hand machine stand Rotary cam switch with star-delta start and emergency stop switch Wheel diameter 800 mm Belt speed 1800 m/min Cutting height 520 mm Cutting width 780 mm Blade length max. 5775 mm Saw blade width min. /max. 15 mm /4 0m m Optional with special coating Saw blade width min. max. 10 mm / 35 mm Table size 1145 x 760 mm Table height 930m m Suction nozzle 2 x 0 120 mm, Motor power 4 kW / 5.5P S Voltage 400 V / 50 Hz Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 525 kg Location: From stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, machine/vehicle number: C890, PANHANS band saw Type BSB 600 Stand in modern steel construction, table top thick-walled, high ribbed cast iron massive grey cast iron band saw frames technology: - upper and lower PANHANS band saw blade guide APA II - finely planed cast iron table - swivelling table top up to 20 - dynamically balanced band saw blades with vulcanized rubber bandages - fence ruler can be used to the left of the saw blade - Fence profile can be folded down Iedpfjbzmb Hsx Amyoat - blade tension indicator - mechanical height adjustment by hand wheel with locking pinion - automatic motor brake with main switch and motor protection switch technical data: - max. cutting height 380 mm - max. cutting width 570 mm - table size (BT) 590 x 810 mm - table height 905 mm - wheel-Ø 600 mm - engine power 2,2 kW - wheel speed 820 rpm - max. saw band length 4710 mm - suction nozzle-Ø 2 x 100 mm - machine weight 272 kg - machine size (LBH) 1120 x 750 x 2125 mm Location: ex stock Bitburg Top exhibition price Freely loaded

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 6,000 rpm, section length (max.): 3,450 mm, TECHNICAL DETAILS Maximum cutting height: 155 mm Maximum cutting height at 45°: 105 mm Maximum cutting width: 1,250 mm Maximum cutting length: 3,450 mm Maximum saw blade diameter: 450 mm Bore diameter: 30 mm Saw blade tilt range: 0 - 46° Speeds: 3,000 / 4,000 / 5,000 / 6,000 rpm Sliding table length: 3,200 mm Scorer: Auto-EPS with motorized positioning for lateral and height adjustment Cross carriage: Standard, with 3 digital flip stops, extendable up to 3,500 mm Rip fence: Motorized control, with positioning control to 0.1 mm MACHINE DETAILS Motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,300 x 1,700 mm Iedeyx Et Hjpfx Amyjat Machine weight: 1,250 kg EQUIPMENT Electrical axis control Sliding table completely readjusted Ruler carrier replaced with new system, featuring 3 flip stops Stainless steel scale for angle adjustment renewed Cross carriage checked Longitudinal fence with 90° locking completely replaced Machine electrically inspected Machine completely readjusted, checked, and lubricated Note: The specified data are partially taken from manufacturer's brochures or documents and may differ from the actual values.

Condition: ready for operation (used), Year of construction: 2025, Panel saw manufactured in 2025. This Wehrmann WT-50/900 is designed for classic cutting of wood and wood-based materials, featuring a maximum panel width of 450 mm and thickness ranging from 8 mm to 40 mm. It includes a user-friendly design with servo-controlled drives and a robust steel frame. If you are looking to get high-quality cutting capabilities, consider the Wehrmann WT-50/900 panel saw we have for sale. Contact us for further details. • Condition: New • Application: Classic cutting of rectangular workpieces made of wood/wood-based materials with laminate (CLP, HLP), paper, foil, or veneer • Workpiece/panel capacity: • Length: from 140 mm • Width (finished size): min 50+50 mm; max 450+450 mm (asymmetrical cutting possible) • Thickness: 8–40 mm • Max workpiece weight: approx. 30 kg • Shape: rectangular • Working height: 900 mm • Machine side: Right-hand machine (stop side on the right in the direction of travel) • Feed/adjustments: • Feed speed: 5–40 m/min, servo-controlled • Electronic height adjustment: 5–45 mm via Beckhoff servo axis Iasdpfx Amoyuggxsyjt • Right-side Teflon stop ruler, servo-driven • Left infeed ruler with pneumatically spring-loaded unit, servo-driven • Construction/transport: • Sturdy welded steel frame • Transport by belt with height-adjustable top pressure • Low-maintenance belt with gentle transport coating • 32 mm V-belt top pressure with spring-loaded rollers for reliable guidance • Aggregates: • Aggregate 1: Frequency-controlled scoring saw • Perske motor 4.4 kW, 50 Hz, 400 V, 4500 rpm • Tool holder D=35, key • External + internal thread R/L, servo-controlled, tandem, non-swiveling • Height adjustment via Beckhoff servo axis • Lateral adjustment with mechanical digital display • Max saw blade Ø 350 mm • Flow-optimized extraction hoods • Without tools • Aggregate 2: Frequency-controlled main saw • Perske motor 6 kW, 50 Hz, 400 V, 5000 rpm, counter-rotation • Tool holder D=35, spline shaft, external + internal thread R/L • Max saw blade Ø 400 mm • Split wedge adjustable by hand • Height adjustment via Beckhoff servo axis • Lateral adjustment with mechanical digital display • Flow-optimized extraction hoods • Without tools • Control and HMI (Beckhoff): • PC-based control with integrated PLC and electronic line control (TwinCAT 3) • 15.6" multitouch panel with integrated keypad/keyboard/mouse • Simple, component-oriented program creation; freely definable program names; virtually unlimited program memory • Operation via keyboard/mouse/touch; message system for operator/error messages • MDE Basic: production time, setup time, downtime, fault time, unit counter, adjustable recording period • Fast EtherCAT fieldbus; Ethernet RJ45; USB port • Uninterruptible power supply (UPS) for panel PC • PLC programming per IEC 61131-3 • Feed lock for adjacent machines/transport systems • Included with basic machine: • Sound absorber/protective hood with safety lock • Connection pieces for external extraction (min air velocity 28 m/s, negative pressure 2480 Pa) • Compressed air connection with maintenance unit • Integrated control cabinet with cooling unit (ambient 10–45 °C) • Safety and protective measures per CE; CE mark • Utilities and specs: • Operating pressure: 6 bar • Power: 3/N/PE, 400/230 V, 50 Hz, ±5% (ECD protective circuit not applicable) • Language: • Machine labeling: German • Operating instructions: German • Spare parts lists: German • Paint finish: • Base/cladding: Gray-white RAL 9002 • Aggregates: Dust gray RAL 7037

Year of construction: 1989, condition: good (used), Stop, depth stop, length stop for press brake, bending machine, guillotine shear... Iajdpjgrzu Uofx Amyot -Spare part: Stop bar comes from a Dorsten BBM press brake, type: APE80-3050 -Servo motor: Manufacturer Stromag -Servo motor: Type: FGP311/005-40AA -Stop ruler: 2630 mm -Length (unit of measurement) approx.: 800 mm -Dimensions 2630/800/H340 mm -Weight 480 kg