Used Skipper for sale (204)

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Safety enclosure on the working head - Side safety metal grids - Front emergency carpets The following technical data are ESTIMATED and are not BINDING: Numerical Control with Software Biesse Works - Workpieces dimensions (workable panels): - Length: mm 90 - 3000 x Width: mm 70 - 1000 x Thickness: mm 8-60 (for longer panels than mm 2000, minimum thickness is mm 13) - No. 2 Grippers to keep fix the workpieces during process and 1 in-feed table (with air-blowing) - No. 1 Out-feed table, with motorized conveyoring belts BOTTOM WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe) TOP WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe) Credozy Ngwepfx Aptjg

Condition: excellent (used), C.N.C. WORKING CENTER with 3 axes (X-Y-Z) - Goose-neck type Crsdpfx Apszyalkstog Movable panel (workpiece), static working head, Horizontal position of the panel (workpiece) Numerical Control with Software BiesseWorks (Separate electric and command cabinet) Safety cabin (enclosure) of the working head, Front emergency carpets In-feeding working table (panel support) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 90 x 70 x 8 (ca.) Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1300 x 60 (ca.) Two panels that can be processed simultaneously (on the Z-axis) Automatic panel dimension detection system (on the X and Y axes) BOTTOM WORKING UNITS (BH41): No. 31 Independent vertical boring spindles (No.) 31 No. 10 (8 X + 2 Y) Independent horizontal boring spindles No. 1 Circular Grooving Saw (on X axis) dia. (mm) 160 (N° 1 x kw 5) No. 1 Vertical electro-spindle ISO 30 (N° 1 x kw 6,5) No. 1 Horizontal electro-spindle (N° 1) on the Y axis TOP WORKING UNITS (BH41): No. 31 Independent vertical boring spindles (No.) 31 No. 10 (8 X + 2 Y) Independent horizontal boring spindles No. 1 Circular Grooving Saw (on X axis) dia. (mm) 160 (N° 1 x kw 5) No. 1 Vertical electro-spindle ISO 30 (N° 1 x kw 6,5) No. 1 Horizontal electro-spindle (N° 1) on the Y axis

Condition: used, machine/vehicle number: 008566, X axis working area: 3000 mm Y axis working area: 1300 mm Main Electrospindle power: 6.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 82 Csdpfxezvwprj Aptjrg

Condition: excellent (used), A complete furniture production plant, composed of the following main machines: 293000) “HOMAG” KFL flexible Sizing-Milling & Edge Banding line (with HIGH-PERFORMANCE PAKET) 239100) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex with CELASCHI splitter 231200) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex 238000) Flexible CNC Drilling Line “MORBIDELLI+MAHROS+RBO” Flexa 912 238400+200027) 2 x Flexible CNC Drilling Lines “MORBIDELLI+MAHROS” Author 912/924 231200) Flexible CNC Drilling Line “COMEC+KUKA” Frontal for front doors (of furniture) 214000) Digital Printing Line “PROJECTA+GIARDINA+UNIVERSAL+KUKA” 200002) Laminating (coating) Line “HYMMEN-KONTRA” 200037) Production Line “OMGA+BALESTRINI+GANNOMAT+DOUCET” for cabinet front doors/drawers (5 pieces) Csdpozwk Idsfx Aptsrg 200006) “HOLZMA” panel saw, Mod. HPL 400/43, with KUKA robot for unloading and stacking 237100+237200) 2xCNC machines “BIESSE” Skipper 130 CNC+237000+200028) 2x“BIESSE” Skipper 100 237300+200078) 2 x CNC machines “MORBIDELLI” CX 200 + CX 210 CNC machines 200034+200033) 2 x CNC drilling and dowel inserting machines “KOCH+BIESSE” Sprint PTP + HELIX K3 200029 + 200030) 2 x CNC Nesting machines “BIESSE” Rover A FT 1531 CNC (1 with loading and unloading) 200031A + 200032A) 2 x CNC machines “BIESSE” Rover B 1967 Edge (with KUKA robot) 200035) CNC machine “BIESSE” Excel (4 vertical electric spindles) for cabinet front doors 220700) Edge Banding machine “HOMAG” KAL 330 (with LIGMATECH workpiece return system) 200009+200010) 2 x Edge Banding machines “SCM” STEFANI XD (1 with workpiece return system) 200018+200019) 2 x Edge Banding machines “HOMAG-BRANDT” KDF 440 C and KDF 650 261200 + 261300) 2 Cardboard Packaging Lines “DYNATEC+ROBOPAK+KUKA” 2VAC01 + 2VAC02) Extraction systems (AIREX, TECO Westinghouse, Ingersoll-Rand) And many other machines (various ATLAS COPCOM and INGERSOLL RAND compressors, HOMAL KL/KR edge banding machines, HOLZMA and SELCO panel saws, ROBOPAC packaging machines), as well as roller conveyors, shelving, etc. The machines are still installed at the former owner’s premises and can be viewed by appointment.

Condition: used, Technical Data Workpiece Dimensions - Length: 90 - 3,000 mm - Width: 70 - 1,000 mm - Thickness: 8 - 60 mm Working Ranges Crodpezutrtefx Aptjg X-Axis - Vertical Drilling: 0 - 3,000 mm - Horizontal Drilling (X and Y): 0 - 3,000 mm - Through Milling: 0 - 2,500 mm - Partial Milling: 0 - 3,000 mm - Through Grooving with Saw (X-direction): 0 - 2,500 mm - Partial Grooving with Saw (X-direction): 0 - 3,000 mm Y-Axis - Vertical Drilling: 0 - 1,000 mm - Vertical Drilling with 32-mm System: 32 - 1,000 mm - Horizontal Drilling in X: 0 - 1,000 mm - Horizontal Drilling in Y-direction: 90 - 1,000 mm - Milling: 0 - 950 mm - Grooving with Saw (X-direction): 112 - 1,000 mm Z-Axis - Material Thickness: 0 - 60 mm Equipment The machine is equipped with 78 independent drilling spindles, distributed across two mirror-image processing units: - 39 spindles in the upper unit - 39 spindles in the lower unit Each processing unit includes: - 29 vertical drilling spindles (19 along the X-axis and 10 along the Y-axis, 32 mm spacing) - 8 horizontal drilling spindles along the X-axis (4 with dual outlets) - 2 independent horizontal drilling spindles in the X-direction - 2 independent horizontal drilling spindles in the Y-direction - 3.5 kW HSK electro-spindle - Spindle speed: 6,000 - 18,000 rpm Optional Equipment - Roller loading table - Upper and lower work tables (pressure tables) - Upper and lower processing units - Right-hand side strip unloading conveyor - Electronic thickness control - Central automatic lubrication - PC-based CNC control (Windows XP 600 with Soft CN) - Safety system

Year of construction: 2014, condition: ready for operation (used), spindle motor power: 4,000 W, spindle speed (max.): 15,000 rpm, number of axes: 3, This 3-axis BIESSE Skipper v31 was manufactured in 2014. It features a powerful 12 kW machine with a main spindle speed of 15,000 rpm. The machine is equipped with 16 drilling spindles (6 horizontal and 10 vertical) and a grooving blade, allowing for versatile drilling and milling capabilities. If you are looking to get high-quality wood boring capabilities, consider the BIESSE Skipper v31 machine we have for sale. Contact us for further details. Crjdpfxezug Dio Aptjg • Quantity available: 2 units • Machining type: Drilling and milling • Drilling spindles: 16 total (10 vertical, 6 horizontal) + grooving blade • Maximum workpiece size: X 2500 mm, Y 900 mm • Axis travel speeds: X 25 m/min, Y 50 m/min, Z 25 m/min • Electrical/power: 12 kW installed power; 415 VAC; 21 A

Condition: used, machine/vehicle number: 008563, X axis working area: 3000 mm Y axis working area: 1300 mm Csdpfjzruxvox Aptsrg Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 82

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 72122, functionality: fully functional, working width: 900 mm, number of spindles: 17, spindle speed (max.): 24,000 rpm, working height: 70 mm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 900 mm Working area, Z-axis: 70 mm Milling unit Number of milling spindles: 1 Tool holder interface: ISO 30 Spindle speed range: 12,000 – 24,000 rpm Spindle speed control: stepless Drilling unit Number of horizontal drilling spindles: 6 Number of vertical drilling spindles: 10 Sawing unit Manual operation Credpfx Aezulv Dsptjg MACHINE DETAILS Power of main motor: 4 kW Connected power: 12 kW Voltage: 400 V Current consumption: 22 A Fuse rating: 32 A Dimensions & Weight Transport dimensions (L × W × H): 2,000 × 2,600 × 2,700 mm Transport weight: 1,500 kg Number of transport packages: 1 EQUIPMENT CE marking

Condition: used, machine/vehicle number: 005836, X axis working area: 3000 mm Y axis working area: 1000 mm Codpfx Aswuckujptorg Main Electrospindle power: 3.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 82

Condition: used, machine/vehicle number: 007289, X axis working area: 3200 mm Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Cedpfjwukyqjx Aptjrg Total number of drilling spindles: 16

Condition: good (used), Code: 0231 Brand: BIESSE Model: SKIPPER 100 - CE Standard CNC working center for furniture, kitchens, custom furniture, panels and various - CE Standard - Year 2006 Technical data: 3-axis (x-y-z) CNC working center - swan neck machine Movable panel, fixed working head - panel horizontally Integral protection of the working head and with emergency front carpets Numerical control with biesseworks software Infeed table (with motorized belts) left N. 2 panel fixing clamps (for their introduction into the working area) Outfeed table (with motorized belts) right Useful (maximum) working area (x - y - z) mm 3000 x 1000 x 60 Dimensions (minimum) workpieces that can be machined (x - y - z) mm 90 x 70 x 8 Dimensions (maximum) workpieces that can be machined (x - y - z) mm 3000 x 1000 x 60 (for panels longer than mm 2000, the minimum thickness becomes mm 13) Total installed power (kw) 20 (approx.) Lower working units: N. 1 vertical electro spindle hsk d-50 (power Hp 4,8) with inverter Crodpoxqntdsfx Aptsg N. 1 circular saw unit (on x-axis) dia. mm 150 (power Hp 2,3) with inverter N. 29 vertical drilling spindles N. 10 horizontal drilling spindles (8 in x-axis + 2 in y-axis) Upper working units: N. 1 vertical electro spindle hsk d-50(power Hp 4,8) with inverter N. 1 circular saw unit (on x-axis) dia. mm 150 (power Hp 2,3) with inverter N. 29 vertical drilling spindles N. 10 horizontal drilling spindles (8 in x-axis + 2 in y-axis) Transfer for panel loading and unloading: structure made of aluminum profiles, belt-driven table for panel translation/lifting bar BiesseWorks machining programming system Compressed air 7/8 bar Total power Kw 20 Overall dimensions - (see attachment) Machine weight kg 2700

Condition: excellent (used), Year of construction: 2018, used vertical CNC machining center Manufacturer: Biesse Type: Skipper V31 Year of manufacture: 2018 automatic positioning of the chuck pre-positioning and zero-point detection via photoelectric cell work tables with air cushions pressure rollers and vertical pressure device optional: infeed and outfeed devices Codpozl Aqajfx Aptorg working area X 200 – 3200 mm working area Y 70 – 900 mm working area Z 10 – 00 mm working unit BH17 with: - vertical drilling spindles 10 pcs. - horizontal drilling spindles in X 4 pcs. - horizontal drilling spindles in Y 2 pcs. - groove saw 120mm diameter in X direction - milling spindle 4.5 kW workpiece clamping system Control/Software Biesse Works Delivery includes all tools and HSK tool holders shown in the pictures!

Condition: used, Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Crodpfx Aezf Ibdsptog Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Drilling units, Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units, Unit 2 (bottom) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Milling spindles Number of milling spindles: 2 Milling spindles, Unit 1 (top) Number of controlled axes: 3 Motor power: 4.5 kW Milling spindles, Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Grooving units Number of grooving units: 2 Grooving units, Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Grooving units, Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW MACHINE DETAILS Total installed power: 20 kW Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode scanner (manufacturer: SICK) CE marking Protective grating Safety mats The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565

Condition: repair required (used), Year of construction: 2010, functionality: limited functionality, BIESSE Skipper 130 - Year of manufacture: 2010 Codpfx Ajzp Simoptorg - Available from September 2026 - The lower drilling unit has a problem and needs to be repaired. - The machine is still in operation and can be inspected. - Please feel free to contact us if you have any questions.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, Digital automatic drilling machine BIESSE SKIPPER 130 Working condition. Csdpfx Aporkm R Hjtsrg Free for loading.

Condition: used, mileage: 5,44,347 km, power: 250 kW (339.91 HP), first registration: 01/2000, fuel type: diesel, overall weight: 17,990 kg, axle configuration: 2 axles, color: orange, gearing type: mechanical, emission class: euro2, Equipment: all wheel drive, crane, * Scania P114CB 4x4 All-Wheel Drive * 3-sided tipper with salt spreader * Front suspension: leaf spring * Rear suspension: air suspension * Manual gearbox with splitter * VIN: XLEP40004420844 * Engine type: 5770175 * kW: 250 * Displacement: 10600 cc * Tare weight: 11315 kg * Payload: 6450 kg * Gross vehicle weight: 17990 kg * Wheelbase: 3900 mm * Tipper bed length: 4.10 m * Tipper bed width: 2.40 m Cedpokq Apwefx Aptorg * Vehicle length: 7450 mm * Vehicle width: 2084 mm * Vehicle height: 3500 mm * Tires: 315 / 80 R 22.5 * Snowplow with mounting bracket * Winter service equipment * Snowplow width: 3.60 m * Crane: Hiab 085 * Serial number: 0617 * 2 hydraulic extensions * Radio remote control * Year of manufacture: 1999 * Net price * All information without guarantee Tel./WhatsApp:

Condition: used, mileage: 1,82,130 km, power: 294 kW (399.73 HP), first registration: 02/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro5, loading space length: 4,800 mm, loading space width: 2,400 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), Phone: call (Contact · Telephone · Mobile · WhatsApp) Special Equipment: Storage box, rear axle load 13.0 t, trailer coupling: Ringfeder 5050 A, car phone antenna, traction control system (ASR), trailer data display, work lights (2) on cab roof, audio system: MAN Topline radio 12V with navigation system, exterior mirrors and wide-angle mirrors electrically adjustable and heated, wide-angle mirror with electric maneuvering aid, 175 Ah battery, mechanical battery master switch, electrically adjustable and heated curb mirror (right), bolted bridge mounting brackets, air horns on cab roof (2), cab: reinforced suspension, cab: with 2 rear wall windows, tinted, cab: with exterior grab handle, comfort driver’s seat, air-suspended, heated and ventilated with lumbar support, flame start system, generator 28 V / 110 A, 12-speed transmission - type: ZF 12 AS, Tipmatic, rear axle AP HPD-1382/HP-1352, hydraulic pump (Meiller-pump 265/1), rocker lever - brake EVBec controlled, automatic climate control, multifunction steering wheel, high-mounted air intake, dust pre-separator air filter, air deflector against dust swirl, heated air dryer, PTO NH/4C without flange, retarder, seat cover/upholstery: comfort quality, external sun visor, sun roller blind for side window, driver’s door, sound system, stone guard grille in front of radiator, control module for external data exchange, foldable rear underrun protection, rear wall window curtain, extra step for construction vehicles, heated additional fuel filter with water separator Additional Equipment: Axle configuration: 6x4, approach/front mirror, trailer socket 24V / 7-pin, trailer ABS socket, MAN-Tronic on-board computer, rear axle differential lock, MAN Brakematic electronic braking system, EURO 5 engine, cab: M (medium length), suspension: leaf/leaf, electric window lifts, tinted windscreen, manual roof hatch, body type: tipper, rocker lever - brake EVB, heated fuel filter, fuel tank: combination tank - 300 L diesel + 40 L urea solution (AdBlue), air compressor 1-cylinder 360 cc, engine 10.5 L - 294 kW diesel, side-mounted spare wheel hoist, front axle disc brakes, rear side windows tinted, sunblind for front windscreen, spray mist reduction, stabilizer on both rear axles, front axle stabilizer, 3-piece steel bumper, rear axle drum brake, tinted door windows, viscous fan, front axle VO-09 straight, central locking, permissible total weight 26,000 kg Crsdpfx Apoqcrifetjg * VIN: WMA26SZZXBM559896 * 3-way tipper * With Boarmatik * 6-stage retarder * Full leaf spring suspension * Automatic climate control * Seat heating / seat ventilation * Euro 5 EEV * Curb weight: * Payload: * Total weight: 26,000 kg * Wheelbase: * Tipper length: 4.80 m * Tipper width: 2.40 m * Truck year: 2011 * Valid inspection (TÜV) until 02/2023 * ----Palfinger PK 15002 * Serial number: 0811158 * High boom * Rotator + grab connections * 4 hydraulic extensions * Lifting capacity: 2820 / 1820 / 1240 / 880 / 660 kg * Outreach: 4.3 / 5.9 / 7.9 / 10.2 / 12.4 m * Crane year: 2002 * ----Net price * All information subject to change

Condition: excellent (used), Year of construction: 2006, I sell the double side throughfeed CNC working centre Biesse Skipper 100 Year 2006. Very productive and fast. Automatic infeed table. Working length 90-3000mm Working width 70-1000mm Working height 8-60mm Configuration per side: Milling head 3,5 kW, 7000-18000 rpm 29+8+2 Drilling heads 1 Grooving saw D.150mm X-direction Software BiesseWorks. CD included. Condition very good ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included. Credpfjhlhigsx Aptsg Repairs required: 1 safety carpet

Condition: excellent (used), Year of construction: 2008, I sell the double side throughfeed CNC working centre Biesse Skipper 100 Year 2008. Very productive and fast. Automatic infeed table. Working length 90-3000mm Working width 70-1000mm Working height 8-60mm Configuration per side: Milling head 3,5 kW, 7000-18000 rpm 29+8+2 Drilling heads 1 Grooving saw D.150mm X-direction Software BiesseWorks. CD included. Crjdpfxsq Diw Ao Apteg Version with outfeed table. Condition very good ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included.

Condition: good (used), Machining center composed of: 2 drilling heads (one upper and one lower) for vertical and horizontal drilling 1 upper milling unit and 1 lower milling unit 1 upper saw unit and 1 lower saw unit STANDARD CONFIGURATION Crodpfxoy E Ir Ej Aptsg

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 55595, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 60 mm, overall weight: 3,000 kg, controller model: Xp 600, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Working Area Y-axis: 1,000 mm Working Area Z-axis: 60 mm Csdpeydk Rmsfx Apterg MACHINE DETAILS Control: Xp 600 with Biesse Works Software Weight: 3,000 kg EQUIPMENT Automatic loading system with motorized belt conveyor 2 clamps for securing and transporting the panel 1+1 vertical electrospindle (lower + upper) with 3 axes 1+1 independent saw (lower + upper) 29 + 29 independent spindles for vertical drilling in X and Y direction (upper + lower) 10 + 10 independent spindles for horizontal drilling in X and Y direction (upper + lower) Automatic unloading system with motorized belt conveyor

Condition: used, Xp 600 Numerical Control with Biesse Works Software Working range in X axis 3000 mm Working field in Y axis 1000 mm Working field in Z axis 60 mm Codpfxouickyj Aptjrg Automatic loading system with motorized belt transfer N° 2 Pliers for blocking and transporting the panel N° 1+1 vertical electrospindle 3 axes (lower + upper) N° 1+1 independent blade (lower + upper) N° 29 + 29 independent spindles for vertical drilling in "X and Y" direction (upper + lower) N° 10 + 10 independent spindles for horizontal drilling in "X and Y" direction (upper + lower) Automatic unloading system with motorized belt transfer

Condition: used, Year of construction: 2013, Numerical control with Biesse Works Advanced Software Air conditioning system for the electrical panel Working range X 3200 Working range Y 900 Working range Z 70 N ° 1 3-axis horizontal electrospindle, Kw 4.5, Iso 30 cone type "BH 17" boring head with 17 spindles arranged as follows: N ° 6 independent spindles for vertical boring in "X" direction N ° 5 independent spindles for vertical boring in "Y" direction N ° 4 spindles for horizontal boring in "X" direction N ° 2 spindles for horizontal boring in "Y" direction N ° 1 integrated blade in X axis Machine weight Kg 1300 Crjdsxlghcopfx Apteg

Condition: excellent (used), functionality: fully functional, mileage: 2,19,702 km, power: 130 kW (176.75 HP), first registration: 03/2011, empty load weight: 6,413 kg, maximum load weight: 1,077 kg, overall weight: 7,490 kg, axle configuration: 4x2, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 3, loading space length: 3,800 mm, loading space width: 2,400 mm, Year of construction: 2011, operating hours: 4,653 h, Equipment: crane, full service history, Mercedes Benz Atego 818/918/MEILLER 3-way tipper/TEREX 65.2-A2L/Clamshell grab • Manufacturer: Mercedes-Benz • Type: Atego 818 918 • Mileage: 219,702 km • Crane operating hours: 4,653 h • First registration: March 14, 2011 • Power: 130 kW / 180 hp • Wheel arrangement: 4x2 • Suspension: Leaf spring - Leaf spring • Transmission: Manual 6-speed • Engine brake • MEILLER 3-way tipper: Length 3.80m x Width 2.40 m • High side walls 40 cm • Crane: TEREX 65.2 – A2L • Clamshell grab: Kinshofer • 3 seats • 2 trailer couplings • Unladen weight: 6,413 kg • Payload: 1,077 kg • Permissible total weight: 7,490 kg • Euro emission standard: 5 • German vehicle • German registration documents Codpfx Apjzvpg Astjrg • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, mileage: 3,21,371 km, power: 240 kW (326.31 HP), first registration: 02/2012, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, color: white, gearing type: mechanical, emission class: euro5, loading space volume: 1 m³, loading space length: 5,200 mm, loading space width: 2,450 mm, loading space height: 100 mm, Equipment: ABS, air conditioning, crane, * Sun visor * ABS * ASR * Radio * On-board computer * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Heated mirrors * Sunroof * Rear window * Driver's comfort seat * Seat heating * Differential lock, rear axle * Air dryer Csdezywq Depfx Apterg * Duomatik air connection * Engine start/stop system * Fog lights * Trailer coupling * 2-line air connection * 16-speed * Suspension: leaf spring/air * Payload: 7300 * Continuous brake: engine brake ----Special body: Crane: Palfinger PK 12001 EHC, maximum lifting capacity 5.58t, foldable, remote control + floor control, 2-fold hydraulic extension, oil cooler, 6th and 7th control circuits for rotary servo and grapple operation. Read load chart: lifts 2.8t at 3.8m, 1.86t at 5.7m, 1.38t at 7.6m.----Body: 3-sided pallet tipping body, 2-part aluminum side boards left + right, steel floor, lashing points. For sale to commercial businesses only. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase agreements, invoices, pro forma invoices, orders, and sales discussions.