Used Sky Worker Ptk 31 for sale (5,647)

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 17,446 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: DELEM, controller model: DA65, bending force (max.): 110 t, working width: 3,100 mm, number of axes: 8, oil tank capacity: 130 l, overall weight: 8,900 kg, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, power: 11 kW (14.96 HP), input voltage: 400 V, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. In February 2024, the upper WILA tool clamping system was serviced. The machine has very few operating hours. Hydraulics: Hoerbiger Machine number: 122067 Machine type: EHP-L 110 31/25 Year of construction: 2000 Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Hjdsx N Ibhspfx Airow Weight: 8,900 kg Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation If you have any questions or would like more information, please send us a message or contact us by phone.

Condition: used, functionality: fully functional, Year of construction: 2012, in the following configuration: - GEKA punch holder No. 8-31 and 8-40 with quick-change system - GEKA die holder No. 8 and No. 5 - Support table at the punching station with stops - Support table at the flat bar station with stops - Selector switch for setup and operating modes - 1 foot pedal - Incl. accessories (punches and dies) - Technical documentation - CE design Technical data: Punching unit: Punching force: 40 t Throat depth: 175 mm Stroke: 50 mm Strokes per min. (at 20 mm stroke): 20 pcs. Max. sheet thickness Ø: 20 x 15 mm Working height: 970 mm Flat bar shear: Cutting capacity: 300 x 6 / 200 x 13 mm Angle steel 45° (one flange): 50 x 50 x 6 mm Angle steel 90°: 80 x 80 x 8 mm Blade length: 356 mm Working height: 980 mm Round and angle steel shear: Angle steel 90°: 80 x 80 x 8 mm Round: 30 mm Square: 25 mm Working height: 1,110 mm General: Motor power: 3 kW Voltage: 400 V / 50 Hz Dimensions: Width: 800 mm Hjdexu Ugxspfx Airsw Depth: 1,100 mm Height: 1,520 mm Weight approx.: 580 kg The specified performances refer to steel with R = 45 kg/mm²

Condition: excellent (used), Year of construction: 2022, For sale is a used Hammer A3-31 planer-thicknesser with a planing width of 310 mm. The machine is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Technical data: - Planer-thickness width 310 mm - 3 knife shafts (reversible knives) - Thickness height 4-225 mm - Dual foldable planer tables Hodpfx Asv Ianxoirew - Pivoting planer stop - 2.9 kW / 4 HP motor / 400 volts - Year of manufacture 2022 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-AT0YY

Condition: excellent (used), Year of construction: 2017, Ref:11159 . 2017 GP2 Technologies SC3-31 Autocase Fully integrated automatic case making system designed for hardcover and rigid case production with minimal manual input. Process: The operator places the cover material onto the G‑2 gluer, which automatically feeds it and applies adhesive, then positions the boards and spine onto the glued cover. The SC‑3 system then takes over, automatically feeding the case inward, trimming corners, wrapping and folding each side, and pressing the boards to the case material. All functions are controlled via a touchscreen interface, providing intuitive setup and consistent results. Features: Fully automatic case making with minimal operator intervention. G‑2 Gluer with Automatic Viscosity Control for consistent adhesive application. Automated corner trimming and side wrapping for clean finished cases. Integrated pressing system for accurate board bonding. Tablet touchscreen for centralized control and streamlined operation. Reliable, repeatable case alignment and finish quality. Hedpfx Aez H Rgvjirow Specification: Case Size Range: Height: 168.1–406.4 mm Width: 218.9–660.4 mm (up to 711.2 mm without corner trimmer option) Board Thickness: 1.52–3.18 mm (padded board up to ≈6.35 mm) Spine Width: 6.35–82.55 mm Operating Speed: Up to 300 cycles per hour.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: 3050 mm Working area Y: 1250 mm Working area Z: 180 mm 9.5 kW electrospindle Vertical drilling spindles: 12 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 Blade for grooving in the X direction 4-position tool changer Rear 10-position tool changer Worktable with 6 rails, 6 TVN tables with suction cups 90 m³/h vacuum pump Software: Xilog Maestro Laser positioning device Control panel Approximate weight: 2750 kg No additional components included! Hodpfsy Tb Ezex Airow

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Hedpfxjyzdnbj Airow Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: - 3-knife cutterhead - Planing width: 310 mm - Planing length: 1400 mm - Max. workpiece height: 230 mm - Motor power: 3 kW - Extractor connection Ø 120 mm - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Hsdpfx Aisx U U Ekorsw Reference: R-A0117

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2380 500KG, ABUS Lightweight Portal Crane / Gantry Crane Type: LPK Load capacity/lifting capacity: 500 kg Crane girder/steel structure consisting of IPE200 beam / square tube 140x140, standing on 4 heavy-duty swivel casters (200 mm) with 500 kg ABUS GM chain hoist with trolley drive Overall height approx. 4.92 m Width approx. 7 m Bottom edge of running rail approx. 4.65 cm Depth approx. 200 cm Hook height approx. 4.2 m Crane is disassembled and immediately available. The item is located in 75053 Gondelsheim. Very good condition, almost like new. See pictures. Hedpfx Aiozvrg Serjw Shipping by freight forwarder or collection only by prior arrangement.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: KHT, Steel / Stocker indoor crane, gantry crane, bridge crane, including steel structure + floor control Steel structure dimensions approx. length 15m x 9.5m width with 1 bridge crane 12500kg, lifting height 6m Payload/lifting capacity 12.5t System technical data: Crane runway/steel structure consisting of HEA/HEB180 girders, HEB240 guide rails Length of outer edge of steel structure approx. 15m Total width of outer edge (steel structure) approx. 9.53m Total crane height approx. 4.52m Top of guide rails approx. 3.99m Bottom of guide rails approx. 3.87m Top of bridge approx. 4.52m Bottom of bridge approx. 4.13m Hook height approx. 3.4m Track gauge approx. 6.23m Support spacing: left (2.65 + 4.44 + 4 + 3.5 m), right (4.6 + 4.9 + 4.9 m) System is delivered complete: Steel structure complete with conductor rail 1x bridge including travel drives 1x 12500 kg steel wire rope hoist SH 5032-25 4/1 1Am M4 lifting speed 1/6.3 m/min Hsdpowgwrqofx Airjw Crane is disassembled and immediately available The item is located in 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or pickup by appointment only

Year of construction: 1989, condition: good (used), machine/vehicle number: divx, DEMAG KBK crane canopy crane runway rails 1000 + accessories Payload / lifting capacity 80Kg - 2000KG The item is supplied complete: KBK 2 rails, rail connectors, trolleys, end plates, brackets/hangers Rails and accessories are disassembled and immediately available. Hedpfxsty Tkze Airow This item is only sold complete. Full volume approx. 2 truckloads - approx. 22000KG Used condition, see pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or pickup by appointment only

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: MIKA103, DEMAG KBK overhead crane system, dimensions approximately 26 x 3.4 m Load capacity / lifting capacity: 2 x 50 kg per suction lifter Technical data of the system: Hodozv Iyhepfx Airsw Overhead crane system consisting of Demag KBK1+2 rails System will be delivered complete: KBK rails, rail connectors Carriages, end plates, cable track, brackets/hangers, etc. Includes 2x vacuum pump with 2x suction lifters, load capacity per lifter 50 kg Includes various spare parts (approx. 3 suction lifters) and 1 additional crane bridge as a spare System is dismantled and packed on a pallet Connection to 400V 16A power supply and compressed air Item location is 75053 Gondelsheim Very good condition - see pictures Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2 and KBK3 rails are in stock!

Condition: good (used), functionality: fully functional, Year of construction: 2008, Well-maintained, used plate shear from LVD. Type CS 3100 / 6 Capacity: 3100 x 6 mm Electrically adjustable back gauge and cutting angle Manually adjustable shear gap Rear safety guard Hodpfxsz Dwtqj Airsw

Condition: good (used), Year of construction: 2017, functionality: fully functional, Lovati BEM 31 numerical control CNC machine for processing flat glass Year of production 2017 Power 40 KW max. size of glass 3200 x 1650 equiped with tilting loading table Machine is in a good condition working in the factory. Hodpfxotz T Saj Airsw Possibility to see it at work.

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: HN-ALU, DEMAG ALUMINUM overhead crane, span approximately 3x2m Load capacity / lever load: 500 KG - 0.5 tons Technical data of the system: Crane track made of Demag aluminum rails, 180mm The system is delivered complete: Rails, travel units, end plates, cable carrier, etc. Includes a 500kg Kito chain hoist. The crane is disassembled and immediately available. Very good condition, see pictures. Hsdpfx Ajz Tdfteirjw The item is located in 75053 Gondelsheim. Shipping via freight forwarder or collection by appointment only. Demag KBK1, KBK2 and KBK3 rails are in stock! Demag KBK systems are also available. Load capacity 125KG - 1600KG. Please inquire about your crane track with overhang load and dimensions.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: MIKA111-Kran152, DEMAG KBK overhead crane, dimensions approx. 18.2 x 3 m Load capacity / lifting capacity 2 x 50 kg per vacuum lifter Technical data of the system: Overhead crane track 2 x 8 x 3 m made of Demag KBK2 rails Height of steel structure 4 m Top of steel structure (purlin) 4 m Bottom of steel structure (purlin) 3.72 m Bottom of crane track 3.35 m Bottom of bridge 3 m Width approx. 3.1 m Lifting height of vacuum lifter approx. 30-220 cm External dimensions of steel structure (space requirement) 18.3 x 3.1 m Support spacing 8.85 m Hsdpfx Aijzv Icvsrow Dimensions of overhead crane track approx. 8 x 3 m System is delivered complete: KBK rails, rail connectors Carriages, end plates, cable track, holders/hangers, etc. + complete steel structure (IPE180 + square tube 150x150 mm) incl. 2 x vacuum pump with 2 x Palamatic vacuum tube lifter 3, capacity 50 kg System is disassembled and packed on a pallet 1 vacuum lifter is available as a spare Item location is 75053 Gondelsheim Very good condition - almost new. See pictures. Shipping by freight forwarder or pick-up only after prior arrangement. Demag KBK1, KBK2 and KBK3 rails are in stock!

Condition: used, axle configuration: 3 axles, first registration: 06/1992, suspension: air, tire size: 9.5R17.5, color: red, Year of construction: 1992, Self-tracking axle / caster steering. Extendable. Loading bed length: 930 cm x 253 cm Loading height: 90 cm. Extendable. = Further information = Axle configuration Tire size: 9.5R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 30%; tire tread depth right outer: 30% Rear axle 2: Dual tires; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 30%; tire tread depth right outer: 30% Rear axle 3: Dual tires; steered; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 30%; tire tread depth right outer: 30% Weights Unladen weight: 9,985 kg Payload: 35,015 kg GVW: 45,000 kg Identification Model number: SD 31 / SEMI TRAILER / EXTENDABLE = Company information = Hedpfxjy N S Rms Airsw ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Year of construction: 1970, condition: used, machine/vehicle number: TH20010142, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 10t - 10000KG, track 11750mm Hjdpfxsv A Rxkj Airjw Outer dimensions with head carriage approx. 12000mm with steel hoist with floor control Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 3500mm Lifting height of rope hoist 10000mm Crane weight approx. 4000KG incl. 2x 25m guide rails HEB280, incl. conductor rails!!! Beam lengths per side: 1x approx. 10m 1x approx. 15m Support spacing 10m/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: WILres, DEMAG KBK crane sky crane runway dimensions approx. 10x6m Payload / lifting load 500 KG - 0.5 tons Hedsy Hpbdepfx Airjw Technical data of the system: Crane runway made from Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DK2 500KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Hydraulics – Control block for a 40-liter pump. Four identical units are available. Hjdpfx Aszk Exdeirew Price per block: €400. These have not yet been installed.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: DN-HB160-250KG, ABUS HB overhead crane system with dimensions of approximately 19 x 4 m (4 m span) Extending the runway rails is possible! Hedpfszv Ea Sjx Airjw Load capacity / lifting capacity: 250 kg - 0.25 tons - increasing the load capacity up to 1000 kg is possible! Technical data of the system: Crane system with ABUS HB160 rails The system is delivered complete: HB rails, rail connectors, carriages, travel drive in the span, end plates, supports/hangers, etc. Including a 250 kg ABUS chain hoist - lifting height approximately 4 m The crane is disassembled and immediately available. Used condition, see pictures. The item is located in 75053 Gondelsheim. Shipping via freight forwarder or collection by appointment only. Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity: 125 kg - 1600 kg. Please request a non-binding quote for your crane system, specifying the load capacity and dimensions.

Year of construction: 1977, condition: good (used), machine/vehicle number: TH2001/0171-0173, DEMAG KBK crane canopy crane runway with dimensions approx. 10x7m (7m bridge) This crane is available several times ! Payload / lifting capacity 500 KG - 0,5to Technical data of the system: Crane runway made of Demag KBK1+2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/supports etc. incl. 500Kg steel chain hoist - lifting height approx. 3.5m Crane is dismantled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Hedpfx Aiovdnivorew Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: DN3486 / 3482, ABUS HB overhead crane system with dimensions of approximately 7x6m (6m span) The crane is available in two units! – Extension of the runway rails is possible! Load capacity / lifting capacity: 500 KG - 0.5 tons Technical data of the system: Crane system consisting of ABUS HB160 rails The system is delivered complete: HB rails, rail connectors, trolleys, travel drives, end plates, supports/hangers, etc. Includes 500KG ABUS chain hoist - lifting height approximately 4m The crane is dismantled and immediately available Used condition, see images The item is located in 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Hodpfxjzvrcgj Airow Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125KG - 1600KG Please request a non-binding quote for your overhead crane system, specifying the load capacity and dimensions.

Year of construction: 1976, condition: used, machine/vehicle number: TH20010161, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 10t - 10000KG, track 11750mm Outer dimensions with head carriage approx. 12000mm with steel hoist and floor control Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 3500mm Lifting height of rope hoist 10000mm Crane weight approx. 4000KG Hjdpfx Aev A Sa Neirjw incl. 2x 25m guide rails HEB280, incl. conductor rails!!! Beam lengths per side: 1x approx. 10m 1x approx. 15m Support spacing 10m/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: TD2002/2360, DEMAG KBK overhead crane system with approximate dimensions of 3x4m (4m span) This crane is available in multiple units! Other sizes are also available – please inquire! Load capacity / lifting capacity: 800 kg - 0.8 tons Technical data of the system: Crane system with Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, supports/hangers, etc. The crane has internal power supply Includes 800 kg Demag DKES chain hoist (infinitely variable) - lifting height approx. 3m The crane is disassembled and immediately available Very good condition, see pictures The item is located in 75053 Gondelsheim Shipping by freight forwarder or collection only by appointment Demag KBK1, KBK2 and KBK3 rails are in stock! Hedpfx Asztut Neirow Other KBK systems are also available. Load capacity 125 kg - 1600 kg Please request a non-binding quote for your overhead crane system, specifying the load capacity and dimensions.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: K118, Demag / Cranetool Stahlbau Gantry Crane Crane Sky Crane Runway Dimensions approx. 20.3 x 5.2/7.55m with bridge crane Width with 2 protruding posts + 150 + 80cm Payload/lifting capacity 2500 KG Technical data of the system: Crane track/steel construction consisting of HEA240 HEB220/260 HEM240 - beam Hedpfx Aiomkfulsrow Upper bridge 6.45m UK bridge 6.1m Top rails 6.06m UK rails 5.84m Hook height 5.45m Track width 4.96 m Total width outer edge 5.2m / 7.55m Inner edge of steel construction 4.96m Base plate steel construction 43x35 + 60x60cm Support spacing 9.5+10m The system is delivered complete: Steel construction with power supply 1 bridge with 2500 kg Demag DC-Com chain hoist BJ 2017 !!! Documents are available, more pictures on request. Crane is dismantled and available immediately The location of the article is 75053 Gondelsheim Very good condition, see pictures Dispatch by forwarding agent or pick-up only by appointment