Used Slitter for sale (94)

Year of construction: 1994, condition: used, Investors: Round stack feeder 1. folding unit: 4 buckle plates Rbsdpobi U Rqsfx Adbjt Downstream slitter shaft Load protection device 2nd folding unit: 4 buckle plates Laerermschutzeinrichtung accessories: Grooving, perforating, cutting, Shed display

Year of construction: 1989, condition: used, Pallet feeder 1. folding unit: 6 buckle plates Combination folding rollers Downstream slitter shaft Load protection device 2nd folding unit: 4 buckle plates Combination folding rollers noise protection device 3rd folding unit: Redpebi U Nzofx Adbobt 2 buckle plates Combination folding rollers noise protection device

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder • pallet feeder (MBO) • MC control 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates Rsdjddh Evepfx Adbsbt • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery

Condition: good (used), Size: 1.300 x 1.650 mm Speed: 150 m/min Equipment: Rbjdpfxedyk Rlj Adbot feeder: • pallet feeder (MABEG) • counter MCC 3 1st folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention 4th folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention

Year of construction: 2010, condition: ready for operation (used), A GUK slitter rewinder and buckle folding machine is available. Infeed paper width: 210mm, folding capacity: 320 sheets/min, min. forming range: 60mm/105mm, max. forming range: 210mm/340mm, cutting tolerance at 300 sheets/min: +/-1mm, max. roll diameter: 600mm, max. roll length: 4000mm. Documentation available. On-site inspection is possible. Redew Azt Repfx Adbjbt

Year of construction: 2001, condition: good (used), Dear Ladies and Gentleman, we are proud to offer you following machine. You also receive the pictures of the machine so that you can see the very good condition of the machine. The offer is on condition of subject to prior sale: ROTOFLEX VLI 510 – Slitter Rewinder General information: • Brand: Rotoflex • Model: VLI 510 • Year of Manufacture: 2003 • Condition: Good working condition • Availability: Immediately Technical Specifications: • Web Width: 510mm • Functions: o Slitting o Rewinding • Rewind Diameter: Up to 700mm • Unwind Diameter: Up to 750mm Rbodpswmf A Djfx Adbet • Core Sizes: 3" • Slitting System: Razor blade • Minimum Slit Width: 12mm • Web Path: Roll to roll • Counting Options: Label and length counting • Drive System: Servo driven • Web Guiding System: Included Application: Ideal for slitting and rewinding of self-adhesive labels, films, foils, and other flexible materials. • Condition: Regularly serviced and well-maintained _____ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment)

Condition: used, MPS EF 430 Year of Manufacture: 2006 _____ Product Description: • Webwidth: 430mm • 8 x Flexo Printing Units • Rewinders • Unwinder • Web Path Extension with Heater • Anti-static bar single • Web break control • Corona treatment • Combi Slitter Scissors • Web turner unit including backside reading • Lamination unit • Automatic register control • Cooling roller unit Rbjdewaafyepfx Adbet • 8 x UV Dry Sation Air Cooled • Infeed Unit 900 Machine Specifications and Equipment: _____ Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____ Price & Terms:

Year of construction: 1998, condition: good (used), ROTOFLEX R 1300 Rbodpfx Adeq T Schsbst Slitter / Rewinder Specifications:  Age: 1997  Width : 13" (330mm)  Unwind shaft diameter: 76mm  Rewind shaft diameter: 76mm, 50mm, 40mm  Location : Germany Technical- and optical condition: Technical: 8/10 (checked and in excellent running condition) Optical: 8/10 (cleaned and can go to end-user directly)

Year of construction: 1993, condition: good (used), ROTOFLEX VLI 330 Rbsdpfx Ajvwkhnodbjt INSPECTION – SLITTER – REWINDER Machine information: Rotoflex products are proven in practical applications with self-adhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty die-cutter with slitter/rewinder and label checking will rewind rolls in a perfect register with a max. diameter of 700 mms and a max. width of 330 mms into smaller sized rolls. During the process the labels can be checked for quality and missing labels. Specifications:  Max. web width: 330 mms  Roll diameter: unwind: 700 mms / rewind: 400 mms  Shaft diameter: unwind: 76 mms / rewind: 76 mms  Max. speed: 230 m/min.  Slitters  Rewinders  Splice table

Year of construction: 2003, condition: good (used), ROTOFLEX VLI 510 – Slitter Rewinder General information: • Brand: Rotoflex • Model: VLI 510 • Year of Manufacture: 2003 Rjdpfjwmf Adsx Adbobt • Condition: Good working condition • Availability: Immediately Technical Specifications: • Web Width: 510mm • Functions: o Slitting o Rewinding • Rewind Diameter: Up to 700mm • Unwind Diameter: Up to 750mm • Core Sizes: 3" • Slitting System: Razor blade • Minimum Slit Width: 12mm • Web Path: Roll to roll • Counting Options: Label and length counting • Drive System: Servo driven • Web Guiding System: Included Application: Ideal for slitting and rewinding of self-adhesive labels, films, foils, and other flexible materials. • Condition: Regularly serviced and well maintained _____ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) _____ Price & Terms:

Condition: new, functionality: fully functional, Year of construction: 2022, Complete extrusion line for the production of PVC shrink film, specifically designed for sleeve-label applications. Built in 2022 by RL Plastproject (Italy), the machine is brand new, never installed, and immediately available. Technical Specifications: Rbodpfxew Ahfgo Adbot Product: PVC shrink film for sleeves Material: Rigid PVC dry blend Extruder: Single-screw with venting and gravimetric dosing Output: approx. 180–200 kg/h Film thickness: 40–80 micron Usable film width: up to 620 mm Die width: 900 mm Line speed: up to 60 m/min (depending on film) Cooling: Calender with chill roll Orientation: Transverse shrink forming unit Corona treater: Integrated Winding: Dual-position slitter-rewinder Control system: Siemens PLC with touchscreen HMI Installed power: ~220 kW (to be confirmed) Air requirement: 6 bar Footprint: approx. 25 x 6 meters

Condition: new, Year of construction: 2025, Klanke roll slitter for efficient shredding of reject rolls. Features: - Automatic safety lock - Knife guard - Emergency stop ripcord - Siemens PLC Redpfx Aden Hy H Njbobt Technical Data: Blade length: 1500 mm Cutting channel opening: 800 mm Motor power: 7.5 kW Cutting force: 30 tons Made to order Price and further information on request. We are happy to provide you with a non-binding offer.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, overall weight: 5,000 kg, cutting force: 40 t, input voltage: 400 V, number of blades: 1, power: 18.5 kW (25.15 HP), roll length: 2,600 mm, roll diameter: 1,500 mm, noise level: 85 dB, Roll Slitting Machine BOA HRSM 40T 1500 x 2600. This machine is perfectly suited for cutting large rolls of paper/cardboard or even plastic into pieces. The machine is sold in a refurbished condition. It is currently being overhauled and will be provided with a new coat of paint. The machine is supplied with an infeed conveyor and outfeed table. The transport belt is 3,000 mm long and 2,000 mm wide. Technical specifications roll slitter: Maximum roll diameter: 1,500 mm Maximum roll width: 2,600 mm Cutting force: 40 tons Drive: 18.5 kW Rsdpfx Aoxbddaedbebt Cutting speed: approx. 4.5 cm/sec The machine can be inspected at our facility in Almelo.

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Characteristics: Capacity: max ~ 350000 T/pa Width: 7500 mm Rsdpfxevptbue Adbobt Grammage: 35 – 170 gr/m2 Speed: max 1400 m/min

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, offline coater, calander, reeler, offline calanders and slitter winders. Various updates including headbox, top former, press section, offline coater, Voith speedsizer, Voith jet coaters and steambox & ceramic rolls. Rbsdpfx Adovptqiebst Characteristics: Capacity: max ~ 240000 T/pa Width: 4800 mm Grammage: 40 – 170 gr/m2 Speed: max 1165 m/min

Condition: used, lot of debite machines moulders hydraulic shovel 27t and 42t polisher capacity 600mm to 2000mm vertical and horizontal slitter block size 2000 x 1800 3-point shovel etc. approx. 300 tons Rbedpfxencfpbs Adbst negotiation on site always in French, English by appointment or by e-mail translator

Condition: ready for operation (used), Used can manufacturing line for the production of 73 mm or 99 mm cans. Several compositions of machines are available. Consisting of: - Krupp Sdvt duplex slitter - Soudronic FBB400 welding machine - Soudronic inside powder coating system - Outside lacquering system - Frei curing oven - Metalbox 65d spin flanger - FMI A304 beader - FMC 652 seamer Rsdpfxevy Tyxs Adbebt

Condition: ready for operation (used), Used can manufacturing line for the production of 153 mm milk powder cans. Optional can be quoted for other can sizes as well or can be set to 153 mm food cans. Rjdpjvy Txzofx Adbsbt - Krupp Sdvt duplex slitter - Soudronic SBW150 welder - Free outside lacquer - Precision tools gas curing oven - Blema KEBS 160 flanger - Klinghammer SIA 180 beader - Angelus 50p seamer

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Rbjdsihf Twspfx Adbst Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: used, In this offer you purchase a used slitter rewinder ‘Neolt Electro Trim 150’ Object of sale: 1 x Neolt Electro Trim 150 with the following equipment: incl. underframe 150cm roll width possible electric from 2021 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! Redpfowln I Tsx Adbsbt A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: good (used), Robust 800 Roll-to-Sheet Slitter Machine in very good condition, ready for production. Slitting and cross-cutting machine, roll-fed. Sheeter Ideal for bookbinding veneer, paper, canvas, eco-leather, PVC, plastics, self-adhesive foil, etc. Easy format setting, computer control. Manual and automatic operation. Technical specifications: Total power: 3.5 kW Working width: 800 mm Rbedsx N D S Ajpfx Adbst Maximum roll diameter: 600 mm Maximum roll weight: 250 kg Feeding/cutting length controlled by computer Working speed adjustable via inverter Approximate dimensions (L x W x H): 1970 x 1310 x 1400 mm Weight: approx. 1100 kg Includes a sheet outfeed table.

Condition: excellent (used), Year of construction: 2021, Ref: 11062 . 2021 Horizon SmartStacker Only 1.1m books on the counter! The latest, innovative way to process B2 (20” x 29”) digitally printed sheets to finished format size. Features: Near-line operation with Sheet Feeder – can be operated as a near-line system. Newly designed sheet feeder accommodates B2 (20” x 29”) sheets at up to 4,500 sheets per hour. Finishing Line Controller (FLC) controls all setup and operation of the SmartStacker by use of JDF workflow. Can serve multiple HP Indigo 10000 Digital Press units and other HP Indigo presses. Can be connected directly inline to an HP Indigo 10000 Digital Press. Print submission, print, and sheet processing performed without any manual operation for higher sheet integrity & efficient workflow. Can be connected with an Horizon signature folder, saddle-stitcher or perfect binder to achieve total finishing automation. Specification: Sheet Size (Before Cut) Max. 762 x 530 mm or 30.000" x 20.865" Min. 279.4 x 330 mm or 11.000" x 12.995" Piece Size (After Cut) Max. 381 x 530 mm or 15.000" x 20.865" Min. 100 x 105 mm or 3.940" x 4.135" Sheet Weight Range: Normal Paper: 81.4 to 370 gsm Coated Paper (for Merge Stacker): 90 to 360 gsm Paper Thickness: 4 to 15 pt or 0.1 to 0.381 mm *1 pt=1/1,000" Sheet Stacking: Straight Stack or 10 mm or 0.39" Offset Stack Maximum Stack Height: 254 mm or 10.00" Number of Cuts: 1st Process Unit: 1 to 7 columns (14 cutters) 2nd Process Unit: 1 to 4 rows (8 cutters) Production Speed: Up to 4,600 sheets per hour * Production speed differs depending on number of cuts in 1st Process Unit and type/condition of sheets. Rbsdpoycb Srjfx Adbet * HP Press may need to slow down depending on the sheet condition in case of inline configuration.

Condition: new, Year of construction: 2025, Delivery every Monday, Tuesday - RELIABLE! The stable construction creates an ideal prerequisite for precise cutting of sheets up to 1.2 mm thick. Heavy duty manual guillotine shears for trade and industry. With the manual guillotine shear GLT you can make the perfect cut with every job. the extending table makes it easier to guide large-sized metal sheets on the table Support table with graduation Rjdpfx Aocudlasdbsbt robust and compact steel construction high quality, durable steel knife extremely stable and heavy construction made of cast iron ground and hardened guillotine shears Back gauge system with Scala CE approved quality Declaration of conformity stable and robust construction for steel plates up to 1.2mm open design suitable for endless cuts large cast work table Working length 2050mm Dimensions: Length: 2500mm Width: 750mm Height: 1150mm Weight: approx. 500 kg Price: 4.650 euros Delivery date: every week We are looking forward to your contact!

Condition: used, SLITTING LINE GEORG 1500x1.5x25 Redpfx Aoxl R A Rsdbsbt Main technical data Coil thickness: 0.24 – 1.5 mm Uncoiler coil weight: 25 Tn Coil width: 230 - 1500 mm Coil outer diameter: Max. 1850 mm Working speed: 200 m/min Slitting tolerance: +/- 0.125 mm Line direction: Right to left Recoiler coil weight: Max. 16 Tn 2 Slitting heads PLC: Siemens S7 1200 Cutting capacity: number of cuts with 350 MPa 24 cuts for thickness 0.25 mm 28 cuts for thickness 0.50 mm 21 cuts for thickness 0.75 mm 18 cuts for thickness 1.00 mm 15 cuts for thickness 1.25 mm 12 cuts for thickness 1.50 mm Scope of supply 1. Coil Carriage 2. Uncoiler 3. Guiding system with 2 measured edges 4. 203.2 diam. Pinch roll before shear 5. Double interlock table 6. Slitting shear:Shaft diameter: 160 mm 7. 1 off line quick change slitting head available 8. Scrap press and conveyor 9. Intermediate coil table 10. Loop Pit and covering tables 11. Strips Braking Unit 12. Motorised recoiler with hold down separator arm 13. Unloading Coil Car 14. 4 arms turnstile 15. Electrical cabinets & Control panels 16. Existing tooling 17. Existing documentation Coil thickness: 0.24 – 1.5 mm Uncoiler coil weight: 25 Tn Coil width: 230 - 1500 mm Coil outer diameter: Max. 1800 mm Working speed: 200 m/min Slitting tolerance: +/- 0.125 mm Line direction: Right to left Recoiler coil weight: Max. 16 Tn Slitting heads: 2 PLC: Siemens S7 1200 For thickness 0.25 mm: 24 cuts with 350 MPa For thickness 0.50 mm: 28 cuts with 350 MPa For thickness 0.75 mm: 21 cuts with 350 MPa For thickness 1.00 mm: 18 cuts with 350 MPa For thickness 1.25 mm: 15 cuts with 350 MPa For thickness 1.50 mm: 12 cuts with 350 MPa

Year of construction: 1968, condition: good (used), for aluminium Redsgryk Nopfx Adbebt strip width: max. 1.050 mm strip thickness: 10 - 20 mic