Used Smoke System for sale (40,583)

Condition: used, operating hours: 1,386 h, lifting height: 4,600 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX60-30L/600 electric forklift, year of manufacture: 2021, battery valid until 2026, hours: only 1,386!, previous owner: German Armed Forces, rated load capacity: 3,000 kg, lift height: 4,600 mm, fork length: 1,800 mm, scales, side shifter, triplex mast, free lift, STVZO lighting, including charger, in good condition, ready for immediate use. We will be happy to provide you with a leasing or financing offer upon request. Mr. Mihm (tel. ) will gladly assist you. Further information can be found on our website. Subject to errors and prior sale! Bjdpszwlynofx Aktslp Power steering, overhead guard = Further information = Year of manufacture: 2021 Lifting capacity: 3,000 kg Overall height: 225 cm Please contact Tobias Ebert for further information.

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mount DIN 69871 ISO 50 Overhang 358 mm Max. speed range 3000 rpm Max. drive power 22 kW Mounting flange: Blodpfxsz Adz Is Aktop Outer diameter Ø 306 mm Dimensions L x W x H 460 x 306 x 360 mm Weight approx. 150 kg Accessories / Special features: • 2 pivoting axis system "HURON" • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling and panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 2 weeks after order receipt The following work will be carried out during the partial overhaul: - 1 new gear pair - 1 new gear shaft - New bearings for the milling spindle and the gear shafts - New seals for the milling spindle and hydraulic tool clamping - New paint job The image is similar and shows a milling head that has already been overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, Year of construction: 2003, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg INJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l INJECTION UNIT (840) Screw diameter: 50 mm L/D ratio: 20 Bledpfx Aez D U D Tektep Injection pressure: 1946 bar Stroke volume: 442 cm³ Shot weight (PS): 400 g Max. dosing stroke: 225 mm Barrel heating power: 14.8 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Bljdpszd Rmgjfx Aktop Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Desktop Metal Desktop Metal 3D Printer Complete System 3D Metal Printer Studio System from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Includes: Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: In contrast to laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell fillings for lightweight strength. Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. Desktop Metal Studio Sinter Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, Bledpfx Akozd Tllotep the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure uniform heating and cooling without the residual stresses that occur in laser-based systems. Condition: used Scope of delivery: (See image) (Changes and errors in technical data, information is subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, VETTER Krantechnik PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual travel unit, and electric chain hoist For sale is a used VETTER PROFI crane system from the manufacturer Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI Crane System as a two-rail portal with crane bridge Year of manufacture: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,890 mm Support distance L: 5,590 mm Support distance B: 5,890 mm Beam length: 6,390 mm Overall dimensions of the system: approx. 6,590 x 6,590 mm UK crane bridge: 4,145 mm UK portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Rated current: 7.7 / 5.4 A FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Number of load chains: 2 Weight at 5 m lift: 65 kg Travel unit / Trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Bledpfx Aszgv U Ujktop Electric chain hoist SIXX8AF Manual travel unit SiCO-HF 2000 A Load hook Floor control Main switch Conductor rail / Power supply Steel support and beam structure Documentation / Crane test book available Hoist test book available EC declaration of conformity (crane) available EC declaration of conformity (hoist) available Assembly and operating instructions available Accessories as shown in the pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operations Material handling Logistics Longest component: approx. 6.4 m Heaviest single component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition as shown in the pictures System was assembled and in operation Test book and documentation available Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual travel unit SiCO-HF 2000 A Support and beam structure Control / Operating elements Main switch Documentation / Test book EC declarations of conformity Assembly and operating instructions Accessories according to pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Techman Type: Techman Robot TM5-900 The TM5-900 is equipped with an integrated image analysis system, which gives it the ability to "see," allowing it to handle assembly automation and inspection tasks with maximum flexibility. It works in collaboration with humans, sharing the same tasks without compromising productivity or safety. It offers the highest level of precision and efficiency while operating in the same workspace. The TM5-900 is the ideal cobot for the electronics, automotive, and food industries. Payload: 4 kg Reach: 946 mm Weight: 22.6 kg Perfect for Industry 4.0 Highest flexibility and adaptability Extremely low costs for automation and maintenance The TM5-900 is a true plug & play solution. Bedpfezg Eyasx Aktslp Connect a monitor, mouse, and keyboard to the control unit, and the TM5-900 will be ready for use in just a few steps. Scope of delivery: Techman Robot TM5-900 Control unit, connection cable Operating device 2 calibration plates for the camera system 1 landmark Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Bsdpezdqkrofx Aktslp Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, BÖLLHOFF Type: 9524-640-824-5 RIVSET Punch Rivet System with Punch Rivet Pliers Operating voltage: 400V 50 Hz Rated current: 12A Main fuse: 35 A Control voltage: 24 V Signal voltage: 0-10 V with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible riveting pressure: 250 bar max. permissible riveting force: 78 kN Weight of the pliers: approx. 279 kg Year of manufacture: 2012 The system was inspected by the manufacturer and is fully functional. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Bodpezgaabsfx Aktelp We will be happy to answer any further questions you may have by phone.

Condition: used, DSM Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Fastening system Condition: used Scope of delivery: (See picture) Bedpezgabfjfx Aktslp (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. Bedpfx Aezgci Esktslp The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Blodpfx Aezgckcsktsp Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Bosch Type: XR31-3 Description: Delta pick and place robot Manufacturer: Bosch Product type: Sigpack Systems XR31-3 Designation: Delta pick and place Year of manufacture: 2008 Pads/cycle (min): 185 Max. acceleration (g): 0.455 Cycle time (s): 0.32 Working area (mm): 48 x 9.2 Maintenance rate: None Assembly time (h): 2.5 Scope of supply: 1 x Delta robot XR 31-3 Manz operating panel pendant P51 1 x Rotary gripper Condition: used (Changes and errors in the technical data are subject to change!) Bljdpjzdrzrofx Aktep We will be happy to answer any further questions you may have by phone.

Condition: used, TOX Type: TZ-VSN TOX – Full-Punch Riveting System The full-punch rivet initially separates all joining partners and then pushes the punched-out section out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, is expanding its range of products and services to include a future-oriented process. Full-punch riveting offers an additional mechanical sheet metal connection that is of great importance for lightweight construction and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed to be so universal that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand tongs and TOX robot tongs. Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Bodpfx Aozdtffektjlp Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Eos EOSINT P 380 Eos EOSINT plastic laser sintering system P380 The following items are included with the EOS P380 system: Bsdpfx Ajzdywzoktslp Build volume container Powder container Overflow container Cooler: Termo TEK thermochiller, type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8-zone process chamber heater, 250°C Each zone can be set individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse rating 32 A MAX. laser power 100 W Laser class (open) 4 Laser class (closed) 1 Weight 850 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, total width: 3,000 mm, total length: 1,800 mm, total height: 6,000 mm, Bag filter Dimensions: 3000 x 1800 x H 6000 Air flow rate m³/h: 10,000/13,000 No. 108 bag filters, L. 3000 Filtration area m²: 120 No. 02 explosion-proof ventilation panels No. 01 motorized screw conveyor No. 01 star valve Ladder Excluded: - Fan - Electrical control panel Bsdpfx Aozy R Shjktjlp - Piping in general

Condition: new, 1 brand-new universal milling head system "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mounting: DIN 69871 ISO 50 Overhang: 358 mm Max. speed range: 3000 rpm Max. drive power: 22 kW Mounting flange: Outer diameter: Ø 306 mm Dimensions L x W x H: 460 x 306 x 360 mm Weight: approx. 150 kg Accessories / Special features: • 2 swivel plane system "HURON" • Hydraulic tool clamping Bodpfxezdbxbs Aktolp • For retrofitting to conventional, NC or CNC milling machines or panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, Iridex Type: IRIDEX OcuLight TX Iridex Laser Systems OcuLight TX IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, and cables. The OcuLight TX solid-state laser systems emit true green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system can result in undesirable side effects. OcuLight TX Ophthalmology: Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Otolaryngology: Stapedectomy Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser Excellent efficiency with a powerful 2500 mW of laser energy provides pulse durations and pulse intervals from 10 to 3000 ms. Offers TrueCW laser pulses for maximum control and precision. Flexible range of delivery devices and a wide selection of handpieces for different surgical procedures. Optional remote control and wireless foot switch to reduce clutter and improve ergonomics and control. Quiet operation eliminates distractions. The lightweight, portable design is easily transported between treatment rooms and offices. IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Bljdpfxezd Ut Re Aktjp Target laser: nominally 632 nm Cooling: On-demand whisper fan 10–3000 ms exposure duration and repetition interval Compatible with EndoProbe, LIO, OtoProbe, and SLA Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW Weight: 6.4 kg Length: 15 mm Width: 30 mm Height: 30 mm Condition: used Scope of supply: (See picture) (Subject to changes and errors in technical data, information provided is without guarantee!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A25-S5-22-48417, input voltage: 230 V, overall weight: 51 kg, Dear Sir or Madam, Bedpfx Akozxn E Netslp We are selling: FARO Quantum S MAX 2.5 m, year of manufacture 2022, fully functional, current calibration available, including CAM2 Probing Edition with an unlimited CAM2 license and USB dongle, complete with all accessories. - Arm reach: 2.5 m - Number of axes: 7 Sale only to business customers; no warranty. Equipment: - Calibration kit - Transport case - Mounting plate - 3 mm and 6 mm iProbes - USB cable - Power cord 230 V - Rechargeable battery - Mount G3+, magnetic holder 150 mm - Measuring software CAM2 Probing Edition 1, unlimited license for CAM2 - USB dongle, single-user license Please contact us if you have any questions.

Condition: used, Year of construction: 2018, Offered is a single-lane tray sealing line for food packaging. Sealing tool: 6 impressions. Tray format: Ø 148mm. Tray material: PP barrier. Tray volume max.: 550ml. Control system: Electronic machine control system with operator panel. Equipped with: Carsoe Anytray Denester (tray denester), Ishida infeed conveyor with indexing chain, length 6000mm, Ishida single-lane tray sealer QX1100 with 6-impression sealing tool including tooling trolley, Ishida conveyor belt, length 2400mm, Ishida X-ray inspection system IX-EN-2463, year of manufacture 2018, Ishida checkweigher DACS-G-S015-24-SS, year of manufacture 2018, Ishida discharge conveyor, length 1400mm, Ishida spare parts package. Low operating hours. Inspection is possible by arrangement. Bljds Agwp Ispfx Aktjp

Condition: excellent (used), mileage: 8,48,010 km, power: 368 kW (500.34 HP), first registration: 03/2019, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,300 mm, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 8,850 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 9,000 kg, General information Number of doors: 2 Year of construction: 2019 Cab: single Registration number: 67-BND-6 Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Axle configuration Front axle: Max. axle load: 9000 kg; Steering Rear axle 1: Max. axle load: 11500 kg Rear axle 2: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 11.605 kg Carrying capacity: 17.995 kg GVW: 29.500 kg Max. towing weight: 50.000 kg Functional Tipper: Back Maintenance, history and condition APK (MOT): tested until 03/2027 Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. Bodps Agw Dusfx Aktjlp No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Used Sterling Fluid Systems Liquid Ring Skid Mounted Compressor Skid: Comprises Sterling Fluid Systems Model KPHY 65112 1.4408 Stainless Steel Two Stage Liquid Ring Vacuum Compressor. Rated 265m3/h (154cfm) capacity with 1013mbar (14.7psi) input and 3.5bar (50.8psi) maximum over pressure. Direct driven by 36/40kW 400/690 volt 3/50 1484/1480 rpm motor rated EEX E II T3/T1&T3. Mounted on skid with Sterling 240 Litre Stainless Steel Vertical Receiver rated 4.5 bar maximum working pressure. Also includes (2) GSD Waermtechnik 4.9m2 Horizontal Stainless Steel Heat Exchangers rated 19kW capacity each. Tubes 12 litre capacity rated 4.5 bar design pressure at -20/+50 degC. Shell 42 litre capacity rated 4.5 bar design pressure at 90 degC. Specifications: Capacity: 156.1 ft³/min. Motor Power: 48.2 hp Material Of Construction: 1.4408 Stainless Steel Vacuum Rating: 1013 mbar input, 3.5 bar max overpressure Bsdpfx Akj Agv Tajtslp Speed: 1484/1480 rpm

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1639, Galvanized storage system with 12 slots, designed for DLF-sized items. Bodpfx Aks Agu Sdstelp

Condition: new, Year of construction: 2021, machine/vehicle number: 212288, Equipment: documentation/manual, type plate available, We offer this new GOM ATOS Q measuring system with a measuring volume of 270, manufactured in 2021. Manufacturer: GOM Model: ATOS Q Measuring volume: 270 Year of manufacture: 2021 Measuring volume 270 for ATOS Q Rotary/swivel head (Bento/Balsu) Column stand 1.8m with 0.9m cantilever Motorized rotary table – GOM ROT 350 Bsdpfs Agv Irex Aktslp Transport track on rollers with work surface Image processing computer 5820 24" TFT monitor with monitor case Dongle, external Condition: new If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Large ammonia cooling installation, Consisting of the following components: 1 large switchgear cabinet, left side. 2 frequency converters. 1 frequency converter in a steel cabinet. 1x NH3 separator with Pekasol cooler. 2x expansion tank. 1x tank with various valves and pumps. 2x MyCom unit, gold. 1x heavy-duty MyCom motor. Evapco condenser Indoor units: Cell 1 = 3x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 2 = 3x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 3 = 2x Helpman Thord 436-7/H-NC8-E1 Width: 1,550 mm. Height: 510 mm. Length: 3,420 mm. Cell 4 = 2x Helpman Thord 256-7-KB/E1-400V-SPEC Width: 680 mm. Height: 900 mm. Length: 4,500 mm. Cell 5 = 3x Helpman Thord 446-7/E1-G Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 6 = 3x Helpman Thord 444-7/E1 Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 7 = 2x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 8 = 3x Helpman Thord 446-7/E1-G Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 9 = 3x Helpman Thord 444-7/E1 Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 10 = 2x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 11 = 3x Helpman Thord 446-7/E1-G Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 12 = 3x Helpman Thord 444-7/E1 Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 13 = 2x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 14 = 1x Helpman Thord 456-7-E1-AFV. H-400V Width: 1,600 mm. Height: 510 mm. Length: 5,450 mm. Cell 15 = 1x Helpman Thord 456-7-E1-AFV. H-400V Width: 1,600 mm. Height: 510 mm. Length: 5,450 mm. Cell 16 = 3x Helpman Thord 446-7-E1-AFV.H-400V Width: 1,600 mm. Height: 510 mm. Length: 4,440 mm. Cell 17 = 3x Helpman Thord 446-7-E1-AFV.H-400V Width: 1,600 mm. Height: 510 mm. Length: 4,440 mm. Cell 18 = 3x Helpman Thord 446-7-E1-AFV.H-400V Width: 1,600 mm. Height: 510 mm. Length: 4,440 mm. Cell 19 = 1x Helpman Thor D 224-4-H Width: 1,230 mm. Height: 430 mm. Length: 2,030 mm. Blsdpfx Aks Ag Iu Hjtsp Cell 20 = 4x Helpman Thor D 224-4-H Width: 1,230 mm. Height: 430 mm. Length: 2,030 mm. Loading bay = 4x Helpman Thord 236-7LN Width: 1,580 mm. Height: 410 mm. Length: 2,850 mm. In total, there are 54 cooling motors in the cooling cells. The complete installation will be dismantled and prepared for transport by the seller.