Used Solar Inverter for sale (1,975)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, ALUP ALLEGRO 15-10 screw compressor with frequency inverter, recently serviced. Technical data: capacity: 2.54 m3/min; engine: 15 kW; maximum pressure: 9.7 bar; year: 2016; operating hours: 7583 h; Tedpfx Ais Afdb Rjrsd compressor in fully working condition, with warranty. Net price: 12,500 PLN Gross price: 15,375 PLN Link to video below.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, ATLAS COPCO GA11VSD screw compressor with frequency inverter, serviced. Technical data: Tedpfx Aio Afhhujrsd capacity: 1.70 m3/min; engine power: 11 kW; maximum pressure: 10 bar; operating hours: 8236 h; year: 2009. Price: 12,800 net. 15,744 gross. Compressor in perfect working order. We provide service support. Link to video below.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 11068, total width: 230 mm, total height: 230 mm, total length: 320 mm, overall weight: 6,000 kg, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,350 mm, We offer this demonstration machine, Heesemann Type HSM .4 RQHD, manufactured in 2026. It is currently located in our showroom in AT-4894 Oberhofen am Irrsee. Machine Type: Type HSM .4 RQHD, ROLLER/TRANSVERSE/LONGITUDINAL BELT/DB-S, Grinding width 1,350 mm Machine Number: 11068 Year of Manufacture: 2026 Machine Data: Multi-purpose surface grinding machine, Type HSM .4 RQHD ROLLER/TRANSVERSE/LONGITUDINAL BELT/DB-S Grinding width 1,350 mm Frame construction with conveying table With continuous conveyor belt, feed rate 3 - 15 m/min, frequency-controlled, constant working height 880 mm, machine upper part adjustable (3 - 160 mm) depending on the workpiece thickness, integrated control cabinets. Pressure roller (Ø 50 mm), pivoting, in the machine infeed, incl. oversize control Workpiece suction system with variable vacuum (controlled via vacuum sensor) for the safe transport of workpieces shorter than 500 mm in the feed direction, integrated fan with frequency inverter, drive power 4 kW Automatic workpiece thickness measurement in the infeed Non-driven rollers (in the machine infeed and outfeed) Fold-down table in the machine outfeed, with wooden plate Industrial PC 15.6" Program memory for 1,000 programs Tjdpfx Aj Aft Rbjired Program for remote maintenance Program for dust extraction flap control MMI package consisting of: Intuitive machine operation with self-explanatory symbols LED strips in the outfeed and infeed as operator assistance for the workpiece (Infeed workpiece positioning for better grinding belt utilization, outfeed displays workpiece position) Display of belt manager status on the unit (screen) Unit information with grit size (screen) Visualization of the workpiece position during passage through the machine 1 Contact roller unit with steel roller Grinding belt dimensions: 2,620 x 1,400 mm Belt speeds: 24 m/s Drive power: 22 kW Diameter: 200 mm 1 Transverse grinding unit Grinding belt dimensions: 4,800 x 150 mm Belt speed: 2.0 - 20 m/s Drive power: 15 kW Frequency inverter 1 Longitudinal grinding unit with pressure fin belt system Grinding belt dimensions: 2,620 x 1,400 mm Belt speeds: 1.8 - 16 m/s Drive power: 15 kW Frequency inverter 2 Pressure bar with computer-controlled selective pressure control system CSD® (10 years warranty) 1 Rotating disc brush unit DB-S 10 driven disc brushes, working in 2 rotation directions, central height adjustment for abrasive wear, incl. quick-change device for disc brushes Brush covering: Flex-Trim K220 (1 set) Diameter: 150 mm 1 additional set (10 pcs.) of discs with stranded wire covering (0.25 mm) Operating voltage: 400 Volt, 50 Hz Uninterruptible power supply Energy Management System EMS Belt support side: left Terminal: front left If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Used vertical, mobile, stainless steel AISI 316L reactor by BOCCARD (France) with a total capacity of 577 l. Reactor has a working volume of 300 l and is designed to operate at pressures ranging from -1 to 0,5 bar and temperatures up to 110 ºC. Internal dimensions: diameter 880 mm, length of straight wall line to inspection manway 800 mm. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 35 l and is designed to operate at pressures up to 3,5 bar and temperature up to 145 ºC. The jacket is insulated and clad with stainless steel sheet. Reactor has welded dished top equipped with inspection manway, with internal diameter 350 mm. Also in the top head there is a vertically downward installed homogenizing mixer, directly driven by an electric motor with a power of 2.2 kW, 400 V, 960 rpm, 50 Hz. Reactor has welded dished bottom with central discharge outlet and manually operated valve. Machine is mounted on an integrated frame with 4 wheels and an electrical cabinet equipped with an frequency inverter. Specifications: Capacity: 577 L Type of Stainless: 316 Stainless Steel Internal Pressure: 0.5 bar Internal Temperature: 110°C Jacket Pressure: 3.5 bar Tedpjzbuhwefx Airjd Jacket Temperature: 145°C Legs/Lugs/Mounting Ring: Legs Weight: 620 kg

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 161-540 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 40 mm Shot weight: 206 g Injection pressure: 2377 bar Dosing volume: 226 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x470 mm Platen size: 710x660 mm Ejector: electric Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Tjdpfx Aioz Ipm Djrod Electric machine: energy-saving and very quiet Operating hours: approx. in automatic operation Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control with hot runners x 15 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servomotor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Weight: 13200 kg Length/Width/Height: 5.60x1.72x1.95 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2016, Arburg 570H 2000-400 e² / Hybrid machine / Production line with Wittmann W823 robot Year of manufacture: 07.2016 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 200 t Tie bar distance: 570x570 mm Platen size: 795x795 mm Ejector: electric Clamping unit: toggle Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: energy-saving and very quiet Operating hours: h in automatic mode Euromap 67 Robot interface Air valve x 5 Core pull control Air core pull x 3 Injection unit hardened – bimetal Tjdpfx Aez Ip Tqoired Main motor of the machine – servo motor driven by an inverter – energy saving The injection unit is driven by a servo motor, which is controlled by an inverter Proportional valve on the injection unit – precise injection Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic tool height adjustment Parallel movements Robot Wittmann W823 Year of manufacture: 2015 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C - pneumatic Travel ranges in axes: X-550, Y-1000, Z-2500 Touch control panel Safety package for robot Robot with adapter, conveyor belt, protective housing Purchase of the robot and the conveyor belt at an additional cost Dimensions: Weight: 8550 kg Length/Width/Height: 5.25x1.71x2.21 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2014, Arburg 320C 500-170 e² / Hybrid Machine Year of manufacture: 2014 Injection Unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosing volume: 85 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Operating hours: 48,000 h in automatic mode Air valve x 2 Core pull control Controller with 8 hot runner zones Injection unit hardened - bimetallic Main motor of the machine: servo motor with inverter – energy-saving Proportional valve on the injection unit – for precise injection Dimensions: Weight: 2210 kg Length/Width/Height: 3.41x1.43x1.99 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request Todpez Iqzvjfx Airjd

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 32000 € 611.2 € Doppelsäulenführung 5000 x 34 x 1,1 mm mm 20 - 120 m/min 330 mm 330 mm 350 x 330 mm 845 mm 1.1 kW 3 kW 0.12 kW 2815 mm 1935 mm 1855 mm Tjdpfowiq Hgex Airod 2560 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple feeds) Omron touchscreen, 50 different cutting lengths and 30 programs can be saved Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Sensitive pressure Inverter for stepless blade speed Chip brush Optical height adjustment Chip conveyor Operating instructions in GERMAN or ENGLISH ALTERNATIVE (PRICE ON REQUEST): Model BMSO 330 CH NC with hydraulic feed instead of servo feed

Condition: excellent (used), Year of construction: 1995, Maximum center height: 330 mm Maximum distance between centers: 2000 mm Tsdsx Sx Htopfx Airjd Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter at front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse rate X/Z axis: 10/10 m/min Turret: Number of tool positions: 12 Of which, driven tool positions: 6 Cylindrical shank tool holder: VDI 50 mm Dimensions / Weight: Footprint L x W x H: approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special features: • CNC control system HEIDENHAIN TurnPlus EP 90 with color screen • Spindle orientation C-axis • 12-position turret, VDI 50, of which 6 positions with driven tools, manufacturer SAUTER DIN 5482 B 20x17, max. speed 3000 rpm. • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic steady rest with follower device • Hydraulic quill actuation • Air extraction system, manufacturer LTA • Various tool holders VDI 50 • CE compliant In 08/2025, GILDEMEISTER Service replaced the following parts: 1 servo motor, 1 AC servocontroller inverter power module for 2 axes, 1 power module Simodrive, 1 rectifier/inverter module, 1 control unit for 1 axis, 1 control module for 2 axes inverter servo drive, 1 Simodrive power module (1-axis motor) Total repair costs: 17,000.00 EUR net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Heidenhain UM 121BD ID 667942-01 SN:34007724A - including test report, professionally and completely overhauled and tested, with a 3-month warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange process, your defective exchange part must not have any mechanical damage, such as breakage, as these are no longer repairable. In this case, an additional charge of €300 including VAT will be applied. Tedpfx Aio Aaxg Rerjd Attention: You are bidding on a Heidenhain UM 121BD inverter, ID 667942-01, SN: 34007724A, as part of an exchange service. It has been professionally and completely overhauled and tested, and comes with a 3-month warranty. It is 100% functional, and the scope of delivery is as shown in the photos. Both in the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €300 including VAT will be issued.

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg Todpju U Ihzsfx Aired dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA and electric welding hand Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Protection class IP 23 Water-cooled and frost protection Gas-cooled torch head with remote control for welding current Shielding gas / solenoid valve Equipment: Hose package 7.0 meters Ground clamp and ground cable 3.3 meters *

Condition: ready for operation (used), Heidenhain UM 113 Id.325 002-03 SN: 13307325 – with test protocol, professionally overhauled and fully tested, comes with a 6-month warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange process, your defective part must not have any mechanical damage such as fractures, as these can no longer be repaired. In such cases, an additional invoice of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain (UM 113 ID 325 002-03 SN13307325) as an exchange (Exchange service), professionally overhauled and fully tested, with a 6-month warranty, 100% functional, and scope of delivery as shown in the photos. In both repair and exchange procedures, your defective exchange part must not show any mechanical damage like breakage, as these cannot be repaired. In such a case, a follow-up invoice of €1,000 including VAT will be issued. Tjdpfx Ais Aa Hlusrsd

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price Tsdpfjhvan Iex Airod • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Technical data: Working width mm 1,350 Min./max. working height mm 4 - 170 Sanding belt width/length mm 1,370/2,620 Main motor power kW 18.5 with inverter Feed speed, variable m/min 3.5 - 18 Working units: 1. Unit: "RA" diagonally ribbed contact roller, Sh 86, diameter 160 mm 2. Unit: Combi: rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad "MESAR" with 24 segments Version C: - Elastic electronic segmented sanding pad "MESAR" complete with: - Pneumatic cylinder (on/off) for the automatic raising and lowering of the sanding roller/sanding pad unit - Activation of the sectors via the electronic control system, which synchronizes their engagement with the feed speed and controls the number based on the workpiece geometry, and enables the selection of more or fewer sectors to the left and right of the workpiece. Version 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Tsdpfxehtuvro Aired Additional equipment: Roller table at the infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with electric fan 4 kW (5.5 hp) integrated into the machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4" display with 'eye S software integration' ATTENTION: IMAGES are EXAMPLE IMAGES of a SIMILAR SD70!

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 137 kW (186.27 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,795 kg, input voltage: 400 V, total width: 2,020 mm, total length: 3,800 mm, total height: 1,970 mm, warranty duration: 12 months, heating capacity: 154 kW (209.38 HP), Aircooled chiller/Heat pump GALLETTI MLE144PS2A 137 kW/154 kW Cooling capacity: 137 kW / 38.96 tons (12/7 — 35°C) Heating capacity: 154 kW / 43.79 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump. Hydraulic module. 4-pipe system. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Tedpfey H Dhlsx Airjd Compressors: 4 pcs. Danfoss DSH161A4ALD (scroll, soft starter) Type of refrigerant: R454B Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump EBARA 3M40-125/2.2-Q7AE-NEDN Dimensions: 3.8x2.02x1.97 m. Weight: 1795 kg. Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), CATALOG NUMBER: 6679 TECHNICAL DATA - max. width of workpiece: 250mm - max. height of workpiece: 170mm 6 spindles: 1) horizontal lower 250mm, 5.5kW 2) vertical right 170mm, 5.5kW 3) vertical left 170mm, 5.5kW 4) horizontal upper 250mm, 7.5kW 5) horizontal lower 250mm, 7.5kW 6) universal 250mm, adjustable at an angle of 360°, 5.5kW - 6 spindles with electric up/down adjustment - all spindles adjustable up/down, left/right - spindle diameter: 40mm - 6 toothed, pulling infeed rollers from above, including 2 double rollers - 6 pulling outfeed rollers from above, rubber, smooth, including 2 double rollers - 2 pressure rollers from above - toothed, pulling, swiveling infeed roller from below, in the bed before the first spindle - 2 pulling outfeed rollers from below, metal, smooth - 4 side pressure rollers from below - feed on Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment on a frequency inverter: 6-30m/min - feed motor: 4kW - working pressure: 8-10 bar - electric adjustment of planing thickness - body lifting motor: 1.1kW - central lubrication of the bed - length of the infeed bed: 2180mm - diameter of dust extraction nozzles: 6x150mm - dimensions (L/W/H): 5000x1800x1900mm Tedpfx Aijzxqvwjrjd - weight: approx. 4600kg ADVANTAGES - Made in Italy - With 6 heads - DTR + CE documentation - Ideal for both wet and dry wood - Universal spindle - In perfect condition / like new Net price: 114900 PLN Net price: 26720 EUR Net price calculated at an exchange rate of 4.3 PLN/EUR (prices may vary with significant exchange rate fluctuations)

Condition: used, Kadikis AV Belt Conveyors The conveyors are suitable for material handling, packaging, woodworking and other production lines. Technical specifications: Quantity: 2 pcs Conveyor length: 2000 mm Belt width: 150 mm Drive motor power: 0.75 kW Frequency inverter: Yaskawa V1000 Power supply: 230 V, single-phase Protection: C10 circuit breaker Controls: on/off switch, emergency stop button, speed adjustment with a potentiometer Construction: heavy-duty steel frame with adjustable feet Condition: lightly used, in working order Advantages: Adjustable belt speed Runs on a standard 230 V supply Compact, with a small footprint Tsdpfs Ad Ir Dox Airsd Robust and reliable construction

Condition: excellent (used), Catalog number 7960 TECHNICAL DATA - max. cutting height 140mm - max. element width 700mm - working width of the saw arbor 580mm - arbor diameter 70mm - max. saw diameter 400mm - from above: - pressure pads/ejectors - 2 geared feed rollers - metal sliding roller - from below: - sliding roller - pressure pads - smooth feed roller - saw arbor - smooth feed roller - metal sliding roller - stepless feed speed adjustment via frequency inverter - feed motor 3kW - main motor 22kW - overall dimensions L/W/H 1600x1300x1900mm - weight approximately 2000kg Net price: 46900 PLN Net price: 10910 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) Todoztacispfx Aired

Condition: excellent (used), Year of construction: 2004, CATALOGUE NUMBER 7880 Technical data: - max. cutting height 150mm - max. element width 500mm - working width of the saw blade shaft 400mm - shaft diameter 70mm - max. saw blade diameter 450mm - top: - anti-recoil devices - 2 toothed feed shafts, pneumatically pressed - bottom: - sliding roller - anti-recoil devices - 2 toothed feed shafts - saw blade shaft - 2 toothed feed shafts - stepless feed speed adjustment via a frequency inverter - feed motor 3kW - main motor 55kW - overall dimensions L/W/H 2120x1600x1630mm - weight approximately 2750kg ADVANTAGES – Polish production – solid construction – used machine, very good condition Net price: 55900 PLN Tedpfx Asztac Njired Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: new, functionality: fully functional, machine/vehicle number: 01.7246421503.0001.15, power: 0.18 kW (0.24 HP), rotational speed (max.): 900 rpm, input voltage: 220 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 7 kg, torque: 335 Nm, type of cooling: air, protection type (IP code): IP54, This SEW geared motor is a powerful frequency inverter that combines a compact design with high performance and efficiency. It has been developed for precise control of electric motors. This motor is ideal for applications that require a reliable drive solution. With a robust design and high-quality materials, it ensures a long service life and low maintenance costs. The integrated gear unit ensures optimum torque transmission and enables precise control of the drive speed. Thanks to its flexible mounting options and high adaptability, the SEW geared motor is the perfect choice for industrial applications in various fields, from conveyor technology to mechanical engineering. Tsdpfx Aisuu Rx Dsred

Condition: used, Year of construction: 2006, * Work area: 2,650 x 1,240 mm * X-Y travel: 2,995 x 1,385 mm * Z-axis travel: 200 mm * Clearance height: 180 mm C-axis deactivated - 3-axis machine The structure of the base body is a monolithic construction made of thick-walled steel. It is reinforced throughout the machine bed by welded triangular plates, making it extremely stable. The triangular shape used for the supporting parts, with a large base, is the key to long-lasting precision and stability. The machine's layout allows the user an optimal workflow despite minimal space requirements. The base body, constructed in this way, provides the machining unit with a balanced and secure base with particularly good load distribution. The mobile unit carrier is made from a solid monoblock. It is positioned in the X-direction on prismatically ground guides via ball screw slides. The machining unit is, in turn, attached to the mobile unit carrier on prismatic, ground guides and the ball screw slide. Description of units and accessories (base) Drilling unit: Drilling head with 12 + 6 spindles * 7 individually selectable vertical spindles in X * 5 individually selectable vertical spindles in Y * 4 horizontal spindles in X (2+2) * 2 horizontal spindles in Y (1+1) * Speed: 4,000 1/min * Power: 2.2 kW * Grid: 32 mm * Drill chuck: M 10 with Morse taper No. 11 Nut saw unit in "X": * Integrated in the drilling head * Nut saw blade with a diameter of up to max. 120 mm Main milling unit (Position 2): * Tool holder HSK 63F * Speed 1,500 - 24,000 1/min, stepless via inverter * Motor power 4.4 kW (6 hp) from 12,000 1/min (S1) * Motor power 6.6 kW (9 hp) from 12,000 1/min (S6) * Right/left rotation * Ceramic bearings * Scope of supply: 4 pcs. tool holder (right) without collet Tool changer R8L Automatic tool changing device for 8 tools. Mounted on the rear unit carrier for quick access to the tools. * Number of tool positions: 8 * Max. tool diameter: 120 mm * Max. weight per tool: 4.5 kg * Max. total weight of all tools: 22 kg * Holder for 1 angular gear * Mounted and moving in X Horizontal milling unit (Position 1) Horizontal unit with two opposite outlets for milling and grooving. * Speed 9,000 - 18,000 1/min, stepless via inverter * 1 outlet for collet 3-20 mm (ER 32) Tjdpfx Asx Twccoirod * 1 outlet for saw/collet 3-12 mm (ER20) (For saw D=120 mm / bore 50 mm) * Motor power 3 kW (4 hp) * Max. tool diameter, front milling: 20 mm * Max. tool length, front milling: 110 mm * Max. tool diameter, rear milling: 12 mm * Max. tool length, rear milling: 80 mm * Max. saw blade diameter: 100 mm * Bore in saw blade (ER 32): 50 mm * Arbor diameter, saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum "freedom of movement". The vacuum quick-clamping system offers maximum flexibility with precise positioning and optimal workpiece clamping. * 6 supports 1000 mm, stepless pneumatically adjustable in X * 12 vacuum suction cups, round D = 110 mm, steplessly adjustable in Y (2 pcs. per support) * 2 stops in X (1 x left / 1 x right) * 1 stop in Y per support (total 6 pcs.) * The retractable reference stops are CNC-controlled * Pendulum machining standard (2 working areas) --- other clamping systems are available as optional extras --- Axis movement The drive system in X, Y and Z is via ground ball screws.

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Tsdpjx Twdyofx Airod

Condition: used, Year of construction: 2006, - 528345 Safety device - 528110 CNC central lubrication system - 529166 Central extraction system - 529214 24-position tool changer - 528837 Work table with supports - 528716 16x TV vacuum cups, 145x145 mm Tjdsz Algfopfx Airsd - 528717 8x TV vacuum cups, 145x50 mm - 528719 6 positioning aids - 528200 2 cross lasers - 528715 Preparation for clamping cylinder - 528600 Clamping cylinder, Morbidelli - 528121 Vacuum pump - 529207 Reinforced inverter - 528487 Drilling head speed controlled via machine inverter - 523025 Dongle for Xilog - 528409 Software preparation for teleservice - 529334 Clearance height 280 mm - 528525 PC control Storage location: Nattheim

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, ALUP ALLEGRO 19-10 screw compressor with frequency inverter, serviced. Technical data: capacity: 3.09 m3/min; motor: 18.5 kW; maximum pressure: 9.7 bar; year: 2018; operating hours: 7081 h; compressor is in full working order, warranty included. net price: 15,500 PLN gross price: 19,065 PLN Link to video below. Tjdo Afddropfx Aired

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, ATLAS COPCO GA22VSD screw compressor with inverter, serviced. Technical data: capacity: 3840 m3/min; engine power: 22 kW; maximum pressure: 12.80 bar; year: 2008; operating hours: 11326 h. Price: 17,800 net 21,894 gross Tsdo Afhh Ujpfx Airjd The compressor is in full working order, ready for operation, and comes with a warranty. We provide service support. Link to video below.