Used Solenoid Valve for sale (6,202)

Condition: like new (used), Year of construction: 2026, Band width: max. 76 mm Feed length: max. 76 mm Band thickness: 0.076 - 1.91 mm Speed: max. 195 strokes/min at full feed length Feed force: 205 N with mechanical control valve or optionally, as shown in the picture, with solenoid valve (24V or 230V) also available in: - band widths from 38...400 mm - feed lengths up to max. 300 mm - band thicknesses 0.05...3.18 mm Hodpoxaqvefx Abtjt

Condition: used, Year of construction: 2011, Used Equipment Hedpfx Abjzvz Tbetst Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Year of construction: 2020, operating hours: 3,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: SN_20-96, Wet dust collector from Absaugwerk, model W 3000, for sale We are offering a wet dust collector from Absaugwerk for sale. This unit is the ideal addition to grinding and deburring machines. It is particularly suitable for extracting aluminum grinding dust, as sparks are reliably extinguished in the wet dust collector. Optionally, the machine can be equipped with a HEPA filter, making it also suitable for processing stainless steel. Technical data: Manufacturer: Absaugwerk Machine type: Wet dust collector, series W 3000 Motor power: 7.5 kW Voltage: 400 V / 50 Hz Hsdpfx Abozicy Notot Discharge: Drain valve Filling: Automatic via solenoid valve The machine is no longer in use at our facility but is in working condition and can be inspected and tested at any time. If you have any questions or are interested, please do not hesitate to contact us.

Condition: new, machine/vehicle number: 1.161-070.0, working width: 510 mm, area performance: 2,805 m²/h, warranty duration: 24 months, water tank capacity: 70 l, noise level: 66 dB, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.161-070.0 Drive type: Battery (not included in the set) Drive: Traction motor Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 70 / 75 Theoretical area performance (m²/h): 2805 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 13 / 20 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Gross weight (kg): 345 Weight without accessories (kg): 100 Dimensions (L × W × H) (mm): 1310 × 590 × 1060 Scope of delivery and equipment: The set includes NO batteries and NO charger Squeegee 900mm V-shaped with oil-resistant polyurethane rubbers Disc brush 510mm red - medium-hard Features: Powerful drive Hsdpfexnzuisx Abtot Automatic water stop Solenoid valve 2-tank system The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: - Self-explanatory symbols and a clear control panel. Short training phases. Easy handling thanks to a few yellow-coded controls. - Robust construction with integrated disc brush head. High area performance thanks to the large working width. Brushes are changed via pedal ejection. - Particularly maneuverable machine. Good overview of the surfaces to be cleaned. Easy transport. Key features: - Thanks to its slim and compact design, our battery-powered ride-on scrubber-dryer BD 50/70 R Bp Pack Classic with disc brush technology is extremely easy to maneuver and transport – even in elevators, for example. This positions the affordable entry-level model as a viable alternative to walk-behind scrubbers.

Condition: used, Year of construction: 2006, functionality: fully functional, 2 pieces rotary valve dosing feeders ! Price per unit ! Manufacturer: Torex Model: RV20 Connection size inlet/outlet: 300 x 300 mm Overall height: 455 mm Sealing strips made of rubber Bolted plastic lining of the individual compartments for improved discharge. Functionality has been checked! Bearings can be relubricated from the outside. Last used for dosing hydrated lime. Hedpfx Ajxd Dukjbtot Drive power: 1.5 kW Speed: 30.9 rpm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386V11845, Year of construction: 2019, operating hours: 8,200 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,178 mm, Linde E16 L electric forklift in good condition with extensive features. No pending maintenance, and a new safety inspection certificate will be provided upon delivery. TECHNICAL DETAILS Load capacity: 1,600 kg Load center: 500 mm Lifting height: 4,470 mm Free lift: 1,519 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex Fuel type: Electric Battery capacity: 750 Ah Battery voltage: 48 V Battery weight: 1,013 kg Operating hours: 8,200 h Overall height: 2,178 mm FEATURES Double pedal Central lever control (LLC) Additional hydraulics for 2 functions / 4 valves KAUP fork positioner Side shifter 3 LED work lights Lighting Superelastic tires Cabin Heater Seat heating Air conditioning Charger High-quality HF charger UVV / FEM certificate renewed upon delivery Hedpfx Abozvgf Njtot The tires can be replaced for an additional cost. An inspection and test drive can be arranged at any time. Transportation can be organized upon request, and loading is possible on-site.

Condition: used, This listing is for Biotek Valve module Fluidic Component The unit is in full working condition and ready for immediate use The BioTek Valve Module is a fluidic control component designed for use with BioTek microplate washers and automated liquid-handling systems. It provides controlled switching between fluid supply lines and is suitable for laboratory washing applications. The module is supplied as an individual fluidic component. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Hedpfxozqf H Ij Abtjt Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, functionality: fully functional, machine/vehicle number: H2X394G03243, Year of construction: 2016, operating hours: 11,012 h, load capacity: 5,000 kg, lifting height: 4,610 mm, free lift: 1,550 mm, fuel type: gas, mast type: triplex, construction height: 2,526 mm, fork length: 2,000 mm, empty load weight: 7,375 kg, drive type: Treibgas, Internal combustion forklift Chassis number: H2X394G03243 Hsdpfxozxi Ixe Abtst Load center: 500 ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Technical condition: good Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 40 - 60% Description: Workshop inspected with UVV approval Side shifter Other fork length possible upon request 3rd valve, work light (rear), work light (front), heater, solenoid valve, compliant with STVZO (German Road Traffic Act), full cab, full free lift, CE certificate, safety light, rotating beacon.

Condition: new, For sale: EMG-DREHMO DR 39 B-40 electric valve actuator. The device comes from warehouse stock – condition: new, unused. Hsdjyutpgjpfx Abtet Actuator designed for automatic valve control in industrial installations (water, gas, process technology, power engineering). Technical data • Manufacturer: EMG-DREHMO • Model: DR 39 B-40 • Year of manufacture: 2005 • Torque: 40 Nm • Power supply: 380–420 V / 50 Hz • Motor power: 0.40 kW • Speed: approx. 30–40 rpm • Protection class: IP67 Condition Device is brand new – warehouse condition. Visible transport marks: slightly bent handwheel, small crack in housing by the gearbox (visible in photos). Not tested under voltage – sold as warehouse device / to be checked before installation. Scope of delivery • EMG-DREHMO valve actuator • Handwheel for manual operation Visual condition as per photos.

Condition: used, Year of construction: 2003, Manufacturer: TBMA Model: H-AR 300 Year : 2003 Type : Rotary valve External diameter : 450mm Nominal diameter : 300 mm. Hsdpfjx R Axqsx Abtot Motor power : 0,75 KW

Condition: used, Manufacturer : DMN Model : BL 200/1 Type : Rotary valve External diameter : 345 mm Nominal diameter : 205 mm Leroy Somer motor : 0,75 KW Atex class : EX II 20 Tightness : Air purge Hjdpfx Aox R Axwsbtjt

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Hodpfx Aboy Uuw Tetot Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: like new (used), Spirax Sarco BSA2T Bellows Sealed Shut-off Valve DN200 PN25 NOS Unused Spirax Sarco bellows sealed shut-off valve from stock. High-quality industrial design for steam, condensate and process media. Includes counter flanges. Manufacturer: Spirax Sarco Type: BSA2T Valve Type: Bellows Sealed Shut-off Valve Nominal Size: DN200 Nominal Pressure: PN25 Series: BSA2T Design: Bellows Sealed Valve Hjdpfozb Rdhsx Abtjt Seal Type: Bellows Seal Connection: Flange Pressure Stage: PN25 Maximum Operating Pressure: 25 bar(g) Maximum Temperature: 350 °C Body Material: Spheroidal Graphite Cast Iron SG Designation: EN-JS 1025 Flow Direction: indicated Handwheel Operation: Yes Counter Flanges: included Country of Manufacture: United Kingdom Condition: NOS New Old Stock

Condition: new, Safety valve for presses IMI HERION / NORGREN PSV valve, twin valve, directional control valve Type: XSz 10 V ID No. 2492982 Serial No. 2608 Equivalent to order no.: 2492951 Pressure: 3 to 10 bar Compressed air connection thread (A)+(B)+(P)+(S): 1/2" Compressed air outlet (R): flange connection Supply voltage: 2x 24 Volt (DC) - Base plate hole spacing 115 x 63 mm, 4x mounting holes Ø 6.5 mm - Equipped with silencer on compressed air outlet (R) Valve body dimensions L x W x H: 105 x 90 x 220 mm Dimensions with silencer L x W x H: 180 x 165 x 220 mm Weight: 3.0 kg New, unused, from stock Hjdpfow T U A Sox Abtjt

Condition: like new (used), Year of construction: 2017, functionality: fully functional, High-quality DMS valve applicator - used, but in like-new condition! For sale is an excellently maintained, used DMS aroma valve applicator from Deerberg Mechanical Systems (DMS GmbH), built in 2017. The device was only used for testing and is therefore as good as new. Technical data: • Project number: 639001 Hjdpfxsv Hzr Ae Abtot • Year of manufacture: 2017 • Supply: 400V 50Hz +N +PE • Rated current: 18A • Input fuse: 25A • Control voltage: 24VDC Ideal for precise and efficient aroma valve applications in demanding industrial environments. Although the aroma valve applicator is used, it has always been carefully maintained and is in like-new condition. It is ready for immediate use and offers reliable performance for a wide range of industrial applications. Collection and shipping possible *Shipping prices are calculated individually! Sale without any warranty

Condition: used, 4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: NCP Parker, control block with 12 solenoid valves Hsdpfxeg Td E Is Abtot -Magnet valve: Parker ZB16 12V DC 16W -Individual components: see photos -Dimensions: 230/215 / H130 mm -Weight: 5.5 kg

Condition: used, Stainless steel knife gate valve Diameter 150 mm Made entirely of stainless steel 2 units in stock Hsdpfx Abjx Nykbotet See our other listings VMA Wekerom

Condition: used, für Sekt, Wein und andere Getränke mit CO2. Rinser NOVA 20/1050 Druckfüller ELETTRA 1400/23 mit 28 Füllventilen Korker DELTA 804 Elektrischer Schaltschrank Vakuumpumpe Hjdexyty Uepfx Abtot Flaschenformate 375ml - 1500ml

Condition: used, functionality: fully functional, HYDRAULIC VALVE All our items have been inspected by the technical department. Hodpfx Abexzfgvstot

Condition: used, functionality: fully functional, HYDRAULIC VALVE All our items have been inspected by the technical department. Hsdpfx Ajxzfp Rsbtet

Condition: used, functionality: fully functional, HYDRAULIC VALVE Hjdpfx Ajxzfx Sebtjt All our items have been inspected by the technical department.

Condition: used, functionality: fully functional, HYDRAULIC VALVE All our items have been inspected by the technical department. Hodpfsxzf Uajx Abtot

Condition: used, functionality: fully functional, HYDRAULIC VALVE All our items have been inspected by the technical department. Hodoxzgaqjpfx Abtet

Condition: used, functionality: fully functional, HYDRAULIC VALVE Hodpfxjxzgbnj Abtjt All our items have been inspected by the technical department.

Condition: used, functionality: fully functional, HYDRAULIC VALVE Hedjxzgi Sepfx Abtot All our items have been inspected by the technical department.