Used Solvent Printer for sale (2,846)

Condition: ready for operation (used), Year of construction: 2019, A Fujifilm UV flatbed and roll printing system is available. Roll weight: 25kg, max. roll media width: 1620mm, max. rigid media width: 1610mm, min. media width: 210mm, max. media thickness: 13mm, max. roll outer diameter: 180mm, media core diameter: 2inch/3inch, max. print length: 3030mm, media guidance: 170mm. Machine dimensions X/Y/Z: approx. 3250mm/800mm/1550mm, weight: approx. 300kg. The system was only used from December 2019 until early 2024. Documentation vorhanden. An on-site inspection is possible. Rodpfxsy Tav Es Abpscf

Year of construction: 2011, condition: ready for operation (used), An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible. Rcodpfx Abjylzhlspsf

Condition: ready for operation (used), Two identical Videojet printers are available. One has only been tested for a few cycles, the other is still in its original packaging. Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible. Rjdpfx Abju N Hdyjpecf

Year of construction: 2007, condition: ready for operation (used), A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible. Rcodpfjww Ivnsx Abpsf

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Special Offer – €45,000 EXW, valid until September 1, 2026 Rjdsymb Tqopfx Abpocf DIP-TECH AR 6000 (2013) + Integrated Drying Module After this date, the machine will be dismantled and sold as spare parts. This is the last opportunity to purchase a complete, fully operational system. Technical specifications: • Max glass size: 3000 × 6000 mm • Min. glass size: 500 × 500 mm • Glass thickness: approx. 4–19 mm • Printing technology: Digital ceramic ink printing directly on glass • Drying module: Integrated dryer included • Ink type: Ceramic inks – tempering compatible • Printing technology: Digital ceramic in-glass printing • Application: Architectural & interior glass • Glass types: Float, tempered, laminated Key Advantages ✔ Large-format industrial printer (6-meter capability) ✔ Integrated drying module – faster production cycle ✔ Improved ink stabilization before tempering ✔ Reduced print defects and handling risks ✔ Suitable for façade, architectural and interior glass ✔ Machine in production – ready for immediate operation Inspection possible while powered on.

Condition: used, For sale is a 3D Systems ProX 500 SLS system, including a post-processing station with powder feed, extraction system, nitrogen generator, and extensive peripherals. The system has been regularly maintained and operated continuously under an Elite Service Plan (full maintenance contract). SLS system: - 3D Systems ProX 500 (build volume: 381 × 330 × 457 mm) - MQC (post-processing station and automatic powder feed) - Donaldson extraction system - Nitrogen generator Extensive peripherals: - Festo ATEX vacuum cleaner - 2x blasting cabinets - Scissor lift table cart Condition & Service: - Year of manufacture: 2014 Rsdpfxjzuau Io Abpscf - Regularly maintained - Operated continuously under Elite Service Plan - Full maintenance contract covering the entire operating period - Well-maintained and technically serviced system The system is ideal for companies that want to take over a complete SLS production solution, including powder handling and the necessary peripherals. Preferably sold as a complete package. If you are interested, we will gladly provide further information, photos, and the available technical documentation.

Condition: excellent (used), Year of construction: 2013, Stratasys 3D printer Dimension Elite Maximum build volume : 203x203x305mm Size: 686x914x1041 Rodpfx Ast Dq Rljbpocf Weight (kg): 136

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 467 h, total length: 840 mm, total height: 1,020 mm, total width: 750 mm, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 510 mm, space requirement length: 840 mm, space requirement height: 1,020 mm, space requirement width: 750 mm, 3D printer Evotech EL 102 – professional-grade machine with a large build volume. Original price: €60,000. Inspection possible in Upper Bavaria. Only 467 operating hours! For sale: an Evotech EL 102, a professional FDM/FFF 3D printer manufactured in Austria. This machine is ideal for prototyping, small-batch production, and the manufacturing of functional components with the highest quality requirements. Price negotiable. Technical specifications: - Model: Evotech EL 102 - Printing process: FDM/FFF (Fused Filament Fabrication) - Build volume: approx. 500 × 400 × 510 mm - Extruder: 2 independent extruders (dual extrusion) - Nozzles: 0.4 mm standard (replaceable, other sizes optional) - Layer thickness: 0.05 – 0.6 mm - Print bed: heated, PEEK or metal print plate - The print bed is equipped for mounting print plates with a vacuum system. - Automatic print bed calibration before program start. - Materials: ABS, PLA, PETG, PA, PEEK…, technical filaments with CF+GF and support material. Rjdpfxoztn Dzj Abpscf - Two independent filament drying chambers for a better and cleaner process. - Print head and drive servos are cooled. - Temperatures: Extruder up to 410 °C, heated bed up to 120 °C, build chamber heating up to 100°C - Software: compatible with Simplify3D, Cura, Slic3r - File formats: STL, OBJ, G-Code - Power supply: 400 V, 50/60 Hz - Dimensions: approx. 840 × 750 × 1020 mm - Weight: approx. 500 kg Features & Advantages: - Stable all-metal construction for precise continuous operation. - Large, enclosed build volume for demanding materials. - Dual extruder for multi-material and support structures. - Industrial-grade mechanics & control. - Smooth operation, low vibration. - Optimal for research & development, prototyping and small series production. - The first update package was installed during a service. Condition: - Used, very well maintained. - Fully functional and ready for immediate use. Spare parts + consumables as well as various filament types are included. See pictures. Service: - Loading with a forklift possible. - Transport via freight forwarder. - Offered price is net. - Invoice with VAT possible. We are selling because the machine no longer fits into our service portfolio.

Condition: new, Year of construction: 2024, Solvent based cabin type parts washer. SOLWASH is a hermetic, closed loop washing machine for mass production. utilizes only chlorinated solvents or modified alcohol. Working principle: Parts are loaded in to the basket sitting in front of the machine roller conveyor. The basket is transferred manually or automatically inside the washing chamber. Washing process is started by selecting the required program from the PLC menu. Basic process flow: spray washing - ultrasonic washing - flushing - rinsing and drying The solvent is automatically regenerated and recycled during running the machine. Application Areas: Precision cast parts, copper, brass parts, parts that require precision washing and drying. Metal Processing Industry - Automotive Industry - Printing industry. All SOLWASHes are tailor-made and have a variaty of options depending on your need. Rcedpfxjd I E Iue Abpof solvent cleaning, cabin type parts washer, cabin washer, solvent based washing machine, solvent washing machine Please feel free to contact with us for technical specifications.

Year of construction: 2011, condition: ready for operation (used), Offered is a fully automatic EKRA screen and stencil printing system. Max. print format X/Y: 508mm/508mm, min. print format X/Y: 80mm/50mm, max. frame size X/Y: 740mm/740mm, substrate thickness range: 0.5mm-6mm, max. squeegee speed: 200mm/s, squeegee pressure range: 10N-250N, repeatability: +/-12.5µm, 6 Sigma, cycle time: 8s + printing time. Including solder paste height inspection, 2.5D SPI and fixtures for VarioGrid support bars as well as iPAG dispensing system. The machine was serviced in April 2025. Machine dimensions X/Y/Z: approx. 1140mm/1866mm/1503mm, weight: 980kg. Documentation available. Inspection possible by appointment. Rcsdpfx Aeztrbqjbpjf

Condition: used, Set of dual setups on rolling stand. Dual print heads allows for the marking of two product lanes Great for printing dates or codes on virtually anything, from plastic bottles to plastic bags to paper Stainless steel casing Stand mounted with casters Additional Details Rcsdpfx Abec Skirjpsf Voltage: other Voltage: 100-240 Phase: 1Ph Hertz: 60Hz

Condition: used, functionality: fully functional, Year of construction: 2020, total length: 950 mm, total height: 1,360 mm, total width: 700 mm, overall weight: 188 kg, feed length X-axis: 297 mm, feed length Y-axis: 210 mm, feed length Z-axis: 200 mm, We are offering this ready-to-use Keyence AGILISTA-3200W. Rcjdpfey Hmhhjx Abpef All maintenance has been carried out by Keyence. A full service was recently performed by Keyence, and the printer has been in standby mode since. The printer is in excellent condition. Complete accessory set for immediate operation included: - 1x cartridge of print material - 1x cartridge of support material - 3x waste containers - 1x rinse tank for printed parts - Cleaning kit for parts and printer Viewing by appointment possible. On-site introduction/training available upon request. Technical specifications: - Print material: AR-M2 (transparent print material), AR-H1 (heat-resistant print material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 µm, standard resolution AR-M2: 20 µm, AR-H1: 20 µm, AR-G1L/H: 30 µm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions: 95 x 70 x 136 cm - Weight: 188 kg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), A Roland printer/cutter is offered. Max. printing and cutting width: 1346mm, min./max. media width: 275mm/1371mm, max. media thickness for printing: 1.0mm, max. media thickness for cutting: 0.4mm, without liner: 0.22mm, max. cutting speed: 300mm/s, ink configuration: CMYK, blade force: 30-500gf, max. roll outside diameter: 210mm, max. roll weight: 30kg, core diameter: 50.8mm/76.2mm, max. print resolution: 900dpi, ink capacity: 500ml, weight: approx. 178kg. Inspection by prior arrangement is possible. Rcodpfxjzta Ewe Abpof

Condition: used, TECHNICAL DETAILS - Max. print size : 490 x 390 x 200 [mm] - Max. print volume : 38.22 [L] - Min. print thickness : 0.02 [mm] - XY accuracy : 0.03 [mm] - Materials : Thermoplastic - Power supply : 110-240 [VAC] 50/60 [Hz] 1.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1,400 x 1,260 [mm] - Machine height : 1.100 [mm] - Machine weight : 429 [kg] Rcjdouhcbpepfx Abpof

Condition: ready for operation (used), Year of construction: 2014, An industrial large-format digital printer is offered. Max. print area: 3020mm x 2020mm, compressed air requirement: 7-10bar (100-150PSI), short-circuit withstand strength: 10kA, control: PLC. Equipped with UV curing system, vacuum table. Weight: approx. 3750kg, overall dimensions X/Y/Z: approx. 5950mm/2900mm/1550mm. Inspection possible by arrangement. Rcjdpfx Aezcfibjbpsf

Condition: used, input voltage: 240 V, HP Large-Format Inkjet 4-Color Multifunction Plotter Printer Type F9A30A Print/Scan/Copy Rcodpfeyipt Dox Abpsf Touchscreen Print sizes A1, A2, A3, A4 Print speed A1 format: 25 sec./page or 81 prints/hour

Condition: good (used), Year of construction: 2006, 8 color (7 mounted) Polytype BDM 611 cup printing machine. Including viterno UV system and Corona, Arcotec pre-treatment. * Capacity: 36000 cups/hr * Min. cup diameter: 60 mm Rodpfon Utdqex Abpocf * Max. cup diameter: 130 mm * Max. cup height: 160mm This Cup Printing machine is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Year of construction: 2006, condition: good (used), 8 color Polytype BDM 611 cup printing machine. Including viterno UV system and Corona, Arcotec pre-treatment. * Capacity: 36000 cups/hr * Min. cup diameter: 60 mm * Max. cup diameter: 130 mm * Max. cup height: 160mm Rodpfxsn Utcto Abpscf This Cup Printing machine is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 9,500 h, Keyence MK-G Inkjet Printer – black & white – approximately 2 years old Two Keyence MK-G Inkjet Printers in good condition are for sale. Available: Rsdjzh I Aajpfx Abpecf 1 black printer 1 white printer Both units are approximately 2 years old, fully functional, and in good, well-maintained condition. The printers were in use until recently and can be made available immediately. Ideal for industrial marking, product coding, and packaging printing. Available immediately. Inspection possible by appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, overall weight: 2,200 kg, construction height: 500 mm, construction width: 800 mm, No minimum price – guaranteed sale to the highest bidder! The original printer was upgraded to the J4100 type in 2025 with a €135,000 upgrade! It is practically as good as new! TECHNICAL DETAILS Maximum build size: 1,000 x 800 x 500 mm Maximum layer thickness: 27 µm High speed: Up to 3 base resins, 27 m resolution Super-high speed: 1 base resin, 55 m resolution MACHINE DETAILS Rsdpfszkvpysx Abpscf Power supply: 110 - 240 V Dimensions & Weight Dimensions: 2,870 x 1,960 x 2,105 mm Total weight: 2,200 kg EQUIPMENT Exchangeable print plate with mobile lifting frame Various spare parts PolyJet UV technology

Condition: excellent (used), functionality: fully functional, operating hours: 560 h, The Massivit 1800 is an industrial large-format 3D printer designed for producing full-scale prototypes, displays, molds, scenic elements, and large composite tooling. It uses Massivit's proprietary Gel Dispensing Printing (GDP) technology rather than conventional FDM or SLA processes. Fully functional, in production. Demo possible upon request. 560 hours printed only! Location: Europe Double printhead version. Price includes decommissioning and loading on truck. Installation and training available. Permanent software license Manufacturer Company: Massivit 3D Printing Technologies Model: Massivit 1800 Core Specifications Specification Value Printing Technology Gel Dispensing Printing (GDP) Build Volume (W×D×H) 1.17 × 1.50 × 1.80 m Maximum Part Weight 150 kg Z-axis Productivity Up to 35 cm/hour Linear Print Speed Up to 300 mm/s Material Dimengel UV-curable photopolymer Rcsdpfx Aozcv S Hebpef File Format STL Machine Footprint 3.1 × 2.2 × 2.8 m Machine Weight 2,500 kg Electrical Requirement 380–400 VAC, 3-phase, 32 A Power Consumption ~10 kW during printing Air Supply 6–8 bar compressed air Operating Temperature 16–30 °C Compliance CE For further technical and commercial information, please refer to enclosed brochure.

Condition: excellent (used), Year of construction: 2015, The EFITM VUTEk® HS100 Pro high-volume digital UV inkjet press combines the Rcsdpfx Abozl D Adspjf productivity of screen with image quality approaching off set Printer has been flushed and prepared for transport. Revolutionary productivity • 3.2-meter hybrid digital UV printer handles up to 100 beds/boards per hour in production mode; up to 70 boards per hour in P-O-P mode. • Lower cost per board by eliminating makereadies for job versioning, regionalization, and customization. • Less waste, less downtime, and no increase in labor costs. For further technical details please refer to enclosed brochure

Condition: used, Year of construction: 2018, 3D printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Rjdpevtftqefx Abpecf Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: like new (used), functionality: fully functional, machine/vehicle number: S0711Q0147, Year of construction: 2019, total length: 1,445 mm, total height: 1,680 mm, total width: 730 mm, overall weight: 650 kg, input voltage: 230 V, laser power: 200 W, TRUMPF TruPrint 1000 – 3D metal printer in near-new condition A well-maintained TRUMPF TruPrint 1000 from 2019 is for sale. The machine is a compact and professional 3D metal printer based on laser metal fusion and is suitable for the production of complex metal parts, prototypes, and small series. The metal printer was purchased and installed at Herningsholm Vocational School and Gymnasium in the summer of 2019. It has only been used for educational purposes and has therefore only produced a very limited number of prints. The laser has only a few operating hours, and the machine is in near-new condition. The printer has been used for printing in stainless steel 316L. All prescribed service inspections have been carried out. The latest service was performed in January 2026, and the machine has not been used for printing since. The service report is attached to the advertisement and can also be sent upon request. Various consumables and spare parts are included. Machine data Manufacturer: TRUMPF Model: TruPrint 1000 Year of manufacture: 2019 Machine type: 3D metal printer Condition: Near new Build volume: Ø98.5 x 100 mm Material used so far: Stainless steel 316L Latest service: January 2026 Location: Herningsholm Vocational School and Gymnasium, Herning - Denmark Rcedpfx Ajzrfirebpjf The machine can be inspected by appointment. The buyer is responsible for moving the machine.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! The printing machine consists of the following modules: OCE PAPER INPUT MODULE STANDARD B1 OCE INPUT INTERFACE MODULE B1 OCE PAPER INPUT MODULE OPTIONAL B1 OCE OCE IHCS2.1 SETFIN B2 TECHNICAL DETAILS Dimensions Pal 1051330: H: 114 cm, W: 72 cm, L: 95 cm Dimensions Pal 1051331: H: 113 cm, W: 72 cm, L: 56 cm Rsdezkhl Tspfx Abpocf Dimensions Pal 1051237: H: 147 cm, W: 130 cm, L: 160 cm Dimensions Pal 1051238: H: 192 cm, W: 74 cm, L: 119 cm MACHINE DETAILS Counter readings according to the previous owner’s information, not verified and without warranty. Counter reading B/W A4: 458,756 Counter reading Duplex B/W A4: 939,266 Counter reading B/W A3: 151 Counter reading Duplex B/W A3: 5,677