Used Sound Enclosure for sale (2,263)

Condition: as good as new (ex-display), Year of construction: 2025, SRF master figure left 2 m suction arm Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Itodpfx Aodqzbrsabsn Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: new, Year of construction: 2025, Chip extractor ASA 2803 Itodjhk S Sdjpfx Aabsn mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 120 l Nominal width outside suction nozzle inlet 203 mm Nominal width outside suction socket outlet 1 x 100, 2 x 120 mm Length approx. 1500 mm Width/depth approx. 500 mm Height approx. 2100 mm Weight approx. 53 kg Electrical data Idle speed 2950 min¯¹ Input power 2,2 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 1,92 m² Noise emission Sound pressure level max. 87.5 dB(A) Volume flow Nominal volume flow 2800 m³/h Negative pressure max. 1900 Pa Scope of delivery: Two filter bags, two chip bags. Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Chip extractor ASA 1903 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel Itedpshk S Shsfx Aabon High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 110 l Nominal width outside suction nozzle inlet 203 mm Nominal width outside suction socket outlet 1 x 100, 1 x 120 mm Length approx. 1000 mm Width/depth approx. 500 mm Height approx. 2100 mm Weight approx. 39 kg Electrical data Idle speed 2950 min¯¹ Input power 1,5 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 1,92 m² Noise emission Sound pressure level max. 85.7 dB(A) Volume flow Nominal volume flow 1900 m³/h Negative pressure max. 1700 Pa Scope of delivery: Filter bag, chip bag Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Chip extractor ASA 4303 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 215 l Nominal width outside suction socket inlet 260 mm Itjdpshk S Slsfx Aabjn Nominal width outside suction socket outlet 2 x 100, 2 x 120 mm Length approx. 1700 mm Width/depth approx. 600 mm Height approx. 2400 mm Weight approx. 69 kg Electrical data Idle speed 2950 min¯¹ Input power 3,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 2,4 m² Noise emission Sound pressure level max. 89.9 dB(A) Volume flow Nominal volume flow 4300 m³/h Negative pressure max. 2000 Pa Scope of delivery: Two filter bags, two chip bags. Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg Iodpfxoqlckps Aabjtn - immediately available -

Condition: as good as new (ex-display), Year of construction: 2022, Kaeser screw compressor SM 13 - 11 bar exhibition piece at a special price Iedpevk R A Sefx Aabotn Volume flow at 11.0 bar (g) 1.07 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 9.63 kW Specific power 9.00 kW/(m³/min) Maximum overpressure 11.0 bar Drive motor efficiency at full load 91.7% Drive motor efficiency class IE4 Nominal drive motor power 7.5 kW Drive motor speed 2955 rpm Drive motor protection class IP 55 Electrical supply 400 V / 3 Ph / 50 Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 8 K Sound pressure level 65 dB(A Compressed air connection G 3/4 Location: From stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 203 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 200 mm Length approx. 1061 mm Width/depth approx. 577 mm Height approx. 2300 mm Weight approx. 60 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 84 dB(A) Itedpfjhk S Szox Aaben Volume flow Nominal volume flow 2500 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2024, Solid, self-supporting, firmly welded, torsion-resistant saw frame Sturdy, durable saw-bar steel construction Robust bearing of the motor carriage ensures high cutting precision Powerful, low-vibration 3.9 kW (5.3 hp) motor TRK dust extraction system Automatically deflecting aluminum slatted frame with plastic supports Device for wall mounting ball bearing support rollers divided center support at optimal working height, with aluminum grids integrated small parts support made of wood Supersilent sound insulation for the reduction of saw blade noise Electromagnetic motor brake Weight of the saw approx. 910 kg Cutting depth 60 mm Saw motor power 3,9 kW (5,3 PS) saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm Ijdsihahbspfx Aabstn 2 exhaust ports ø 100 mm Connected load 4,8 kW Mains connection 3 x 400 V / 50 Hz cutting range: L: 4600 ; Hvertical: 2200 mm , Hhorizontal: 2100 mm Equipment: - Compact 5220 - Scorer VSA stepless - Strip stop - Mech. braked support rollers - Free standing support compl. Location: Ex stock 54634 Bitburg - immediately available - Photo shows optional digital display, which is not in the on offer.

Condition: new, Year of construction: 2022, Kaeser screw compressor SK 22 - 11 bar - exhibition piece - Volume flow at 11.0 bar (g) 1.67 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 13.7 kW Max. overpressure 11.00 bar Drive motor efficiency at full load 91.2% Drive motor efficiency class IE3 Drive motor rated power 11.0 kW Drive motor speed 2960 rpm Drive motor protection class IP 55 Isdpjvk R Dcofx Aabjtn Electrical supply 400V / 3 / 50Hz Compressed air outlet temp. above ambient temperature (at +20°C, 30% relative humidity) 6 K Sound pressure level 66 dB(A) Max. usable warm air volume 2500 m³/h Compressed air connection G 1 Cooling oil capacity 7.0 l Cooling oil type compressor SIGMA FLUID MOL Dimensions (W x D x H) 750 mm x 895 mm x 1260 mm Weight 312 kg Location: from stock 54634 Bitburg - available immediately -

Condition: excellent (used), Year of construction: 2013, Technical data: ALKO clean air mobile extraction unit, Type: Mobil-Power Unit APU 120, Motor power: 1.5 kW, Iodpfew Aprzex Aabjtn Suction nozzle Ø=120 mm, Soundproofed, mobile separator container 135 l, manual filter cleaning, Dimensions: L=1,085 mm, W=650 mm, H=1,985 mm, Dust container volume: 135 liters, Weight: 117 kg, Nominal air volume (after cleaning): 814 m³/h, Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft Vertical Panel Saw VPS 2241 VR ED Fully equipped, precision panel saw Item number: 5600242 DESCRIPTION • Smooth and ergonomic operation • Scoring unit for chip-free cutting quality Isdpfow Aqaaex Aabetn • Automatically retracting slat frame • Continuous central workpiece support • Two stops for dimensioning • Panels rest on movable rollers and can be positioned without lifting • Modular welded machine frame, torsion-resistant and self-supporting • Saw unit with chain guide and two control levers • Large opening for saw blade change TECHNICAL DATA General Information • Cutting height: 2200 mm • Cutting length: 4100 mm • Cutting depth: 60 mm • Saw blade diameter: 250 mm • Saw blade speed: 4800 rpm • Scoring blade diameter: 80 mm • Scoring blade speed: 8500 rpm • Number of stops: 2 • Sound pressure level: 89.2 dB(A) Dimensions and Weights • Max. height (product): 3100 mm • Approx. length (product): 5300 mm • Approx. width/depth (product): 1800 mm • Approx. height (product): 3000 mm • Approx. net weight: 600 kg Extraction Connection • Extraction port diameter: 100 mm • Minimum extraction air volume: 1000 m³/h • Minimum air speed: 20 m/s Electrical Data • Drive motor power: 3 kW • Connection voltage: 400 V • Mains frequency: 50 Hz SCOPE OF DELIVERY • Saw blade Ø 250 x 30 x 3.2 mm Z80 trapezoidal • Scoring blade Ø 80 x 2.8-3.6 mm Z20 EQUIPMENT FEATURES • Lower material support: metal rollers • Retractable slat frame: automatic • Vertical digital measuring display • Horizontal digital measuring display • Panel positioning: on movable rollers without lifting Location: ex works - Available at short notice - Subject to prior sale

Condition: new, Year of construction: 2025, Designed for professional structuring and grinding work Motorised height adjustment of the working units with digital display Aggregates can be switched on individually Highly resistant rubberized conveyor belt Stepless feed Inlet height constant Models str l with infinitely variable, inverter-controlled brush speed: this enables the speed to be precisely adapted to the material, making them particularly suitable for sensitive materials. Unit for saw cut optics optionally available Motor-driven height adjustment of the units Aggregates can be switched on individually feed infinitely variable Dimensions and weights Length approx. 1300 mm width/depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Suction nozzle diameter 2 x 150 mm Brushes diameter 190 mm length 300 mm revolution 1500 min-¹ Electrical data Drive motor power 2 x 3.0 kW Power feed motor 0,22 kW Iedpfeff Hdgsx Aabotn Input power 6,25 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise emission Sound power level Lw (idling without extraction) 65 dB(A) Sanding unit grinding width max. 300 mm Feed unit Feed speed 1 - 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: new, Year of construction: 2024, Effective delivery rate approx. 1050 l/min Maximum pressure 10 bar tank capacity 270 l Air outlet ½ " UNIT 1 Dimensions and weights Length approx. 1200 mm width/depth approx. 650 mm Height approx. 1540 mm Weight approx. 295 kg Electrical data Input power electric motor 7,5 kW Supply voltage 400 V Itjdpfjfh Hahox Aabon Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise emission Sound pressure level Lp 62 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Engine(s) Motor type Electric Location: From warehouse 54634 Bitburg - immediately available-

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Isdpfecnw T Iox Aabjtn Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Designed for professional structuring and grinding work Motorised height adjustment of the working units with digital display Aggregates can be switched on individually Highly resistant rubberized conveyor belt Stepless feed Inlet height constant Models str l with infinitely variable, inverter-controlled brush speed: this enables the speed to be precisely adapted to the material, making them particularly suitable for sensitive materials. Unit for saw-cut optics optionally available Dimensions and weights Length approx. 1300 mm width/depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Suction nozzle diameter 2 x 150 mm Brushes diameter 190 mm length 300 mm revolution 1500 min-¹ Iedpeff Hdijfx Aabstn Electrical data Drive motor power 2 x 3.0 kW Power feed motor 0,22 kW Input power 6,25 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise emission Sound power level Lw (idling without extraction) 65 dB(A) Sanding unit grinding width max. 300 mm Feed unit Feed speed 1 - 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 163 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width outside suction socket inlet 160 mm Length approx. 1096 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 83 dB(A) Volume flow Nominal volume flow 2200 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit Iodehk S S Ejpfx Aabstn without suction hose

Year of construction: 2010, condition: excellent (used), Kaeser SM 9 - 11 bar screw compressor Manufacturer: Kaeser Type: SM 9 Machine type: Compressed air screw compressor Year of manufacture: 2010 Condition: Used screw compressor, ready for use Max. Operating overpressure: 11,0 bar Delivery volume: 0,75 m³/min Nominal motor power: 5,5 kW Compressed air connection: G 3/4 Electrical connection: 400V / 3Ph / 50Hz Itedpjhy Tzyofx Aabjn Dimensions WxDxH: approx. 630mm x 800 mm x 900 mm Sound pressure level: 64 dB(A) Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Itjdpfx Ajpq If Deabon Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2023, Striebig Evolution 5224 - Demonstration machine / Exhibition piece Machine if desired with cutting optimization OptiDivide with label printer and label layout EVOLUTION - Precision, ergonomics and functionality perfectly combined Automatic functions, such as automatic locking and swiveling or automatic and swiveling or the automatic insertion and removal of the saw unit, make your your daily work. You too can benefit from the advantages of an EVOLUTION. It can be controlled via a 12" touchscreen computer. The intuitive user interface ensures perfect processing of your orders in every detail. Comprehensive standard equipment Iedpfsvkp H Ajx Aabotn 12" touchscreen computer with optimum operator guidance Laser-supported display of the horizontal cut Digital measuring system DMS-XY Automatic saw beam locking with interface detection Automatic locking and swiveling of the saw unit Automatic infeed and outfeed of the saw unit Automatic fine adjustment of the saw unit Operating hours counter Tool database ALU center support over the entire machine length Integrated, powerful TRK dust extraction system. Dust limit value around 1mg/m³ Control cabinet attached directly to the saw frame Supersilent sound insulation Scoring unit: VSA scoring saw infinitely adjustable Complete free-standing support Complete aluminum small parts support UPS 24 VDC for Touch PC Uninterruptible power supply Weight of the saw approx. 1,100 kg Cutting depth 80 mm Saw motor power 5.5 kW (7.5 HP) Saw blade diameter 300 mm Saw blade bore 30 mm Emission sound pressure level at the workplace LpA 83 dB *3 Saw blade speed 4800 rpm 1 extraction nozzle ø 140 mm Compressed air connection 6-10 bar Connected load 7.5 kW Mains connection 3 x 400 V / 50 Hz Dimensions in mm: Type L H T1 free T2 wall 5224 5645 3018 1741 1361 Cutting range in mm: Type LS HS(vert) HS horizontal 5224 4300 2240 2100 Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2021, Technical data: ALKO clean air mobile extraction unit, Type: Mobil-Power Unit APU 120, Motor power: 1.5 kW, Inlet diameter: Ø=120 mm, Sound insulated, Isdow T U Uzepfx Aabstn Mobile separation drum: 135 l, Manual filter cleaning, Dimensions: L=1,085 mm, W=650 mm, H=1,985 mm, Dust drum volume: 135 liters, Weight: 117 kg, Nominal airflow (after cleaning): 814 m³/h, Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well One suction nozzle each at the spark box and at the rear belt roller Protective disc can be folded away Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Weight approx. 114 kg Suction Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Itedpfx Aohk Df Djabjn Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: new, Year of construction: 2025, Chip extractor ASA 7703 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 290 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/depth approx. 670 mm Iedpshk S Stjfx Aabjtn Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Input power 4,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5,98 m² Noise emission Sound pressure level max. 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Negative pressure max. 2800 Pa Scope of delivery: Two filter bags, two chip bags. Location: ex stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2025, Raw air extractor ASA 141 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 140 mm Length approx. 1062 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 230 V Mains frequency 50 Hz Filter Filter area 1.9 m² Noise emission Sound pressure level max. 78 dB(A) Volume flow Nominal volume flow 1650 m³/h For milling, planing and sawing chips (no dust) Itjdpfx Aashk S Swebsn Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings Itsdev Sk Tmopfx Aaben High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: new, Year of construction: 2025, Holzkraft Vertical Panel Saw VPS 22-51 VR ED Vertical panel saw with scoring unit, dust extraction and digital measurement display Article number: 5601252 DESCRIPTION Smooth and ergonomic operation Modular welded machine frame, torsion-resistant and self-supporting Scoring unit for tear-free cutting quality Automatic retraction of the support slats during cutting Continuous central workpiece support for maximum flexibility Easy switching between vertical and horizontal processing Digital measuring stop Transport rollers can be raised via pedal for easy movement of heavy panels Durable and precise material support for stable workpiece positioning Pneumatic locking of the saw carriage Large opening for saw blade changes Integrated lateral dust extraction TECHNICAL DATA General Information Ijdpfsw Aqagox Aabjtn Max. cutting height 2200 mm Max. cutting length 5100 mm Max. cutting depth 60 mm Saw blade diameter 250 mm Saw blade speed 4800 rpm Scoring blade diameter 80 mm Scoring blade speed 8500 rpm Stops 2 pcs. Sound pressure level 79.1 dB(A) Dimensions and Weight Length (product) approx. 6300 mm Width/Depth (product) approx. 1800 mm Height (product) approx. 3000 mm Net weight approx. 850 kg Extraction Connection Extraction port diameter 100 mm Min. air requirement for extraction 1800 m³/h Min. air speed 20 m/s Electrical Data Drive motor power 3 kW Connection voltage 400 V Mains frequency 50 Hz EQUIPMENT Features Lower material support metal rollers Retreating support slats automatic Vertical measurement display digital Horizontal measurement display digital Panel positioning manual Saw carriage locking pneumatic Location: Ex works - Available at short notice by arrangement -