Used Sound Enclosure for sale (2,301)

Condition: excellent (used), Aerzen GMA 13.6 rotary lobe blower with sound-absorbing enclosure Motor power: 30 kW In very good condition, directly from production!!! Hsdpfxsgin Elo Abtst

Condition: new, Year of construction: 2024, power: 15 kW (20.39 HP), GT SERIES KNIFE MILLS MACHINES HOUSED IN SOUND-ABSORBING ENCLOSURES, COMPLETE WITH BIG-BAG STATION OPEN ROTOR WITH V-CUTTING SYSTEM THE FOLLOWING MILL SIZES ARE CURRENTLY AVAILABLE IN STOCK Hsdpjudyghsfx Abtst GT300/600 ROTOR DIAMETER 300MM ROTOR LENGTH 600MM MAIN MOTOR 15KW ROTOR EQUIPPED WITH V-SHAPED KNIVES

Condition: new, Year of construction: 2022, operating hours: 1 h, power: 408 kW (554.72 HP), continuous power: 367 kW (498.98 HP), Continuous output 458 kVA / 367 kW Voltage 230 V / 400 V Frequency 50 Hz Engine: Volvo TAD1345GE Fuel: Diesel Tank capacity: 636 liters Generator type: Protection class: IP21 Start type: Electric Generator with AVR control Manufacturer: Pramac Hsdswg Tawspfx Abtjt Variant: GSW 510 V, Volvo Stage II, PRP 458 kVA / ESP 509 kVA Sound and weather protection hood, Mecc-Alte generator, ACP automatic control, starter battery, 636-liter plastic tank, oil drip pan, engine preheater, 4-pole circuit breaker The Pramac GSW 510V generator, equipped with the Volvo TAD1345GE engine, is an adaptable machine with a high-quality soundproof enclosure and a comprehensive range of accessories. This powerful emergency power generator is ideal for professional use on construction sites, in industry, for rental/events, and in commercial settings. With its low noise level, the Pramac GSW 510V generator is specifically designed to provide efficient emergency power for households, agriculture, construction sites, and industry.

Year of construction: 2022, condition: ready for operation (used), A mint condition and oil-free Atlas Copco screw compressor system with hardly any operating hours is available. Volume flow at 1.9bar and 193kW: 67m³/h, max. pressure: 2.75bar, output: 200kW, outlet air temperature: 176°C, operating hours: 41h. Including electronics, sound enclosure and starter. Documentation available. On-site inspection is possible. Hedpov Tcq Tsfx Abtst

Condition: used, Year of construction: 1990, Industrial stationary piston air compressor in sound-insulated steel cabinet. Manufacturer: Reflex Model: ZU 57/3 – Typ 180 D Air receiver: 180 liters Made in Germany Complete unit including: Hedpfxeyl Nz Hs Abtjt Piston compressor Electric motor 180L air tank Pressure switch Noise reduction enclosure Condition: Used – Not tested. Sold as seen, ex works. Suitable for refurbishment or spare parts.

Condition: excellent (used), Year of construction: 2019, operating hours: 21,500 h, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 355 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece length (max.): 470 mm, workpiece width (max.): 400 mm, workpiece weight (max.): 500 kg, total height: 2,431 mm, total length: 2,069 mm, total width: 2,328 mm, table load: 500 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 9,500 h, distance table to spindle center: 495 mm, spindle motor power: 13,000 W, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Milling spindle HVC140 HSK-E40 - Milling power S1/S6 40%: 10kW/13kW. Ceramic ball bearings with minimum oil air lubrication. Tool Changer 16 positions for HSK40E (tools until diam. 16 mm and maximum length of 75 mm. Tool measurement with Blum laser (annex on the left) with lasersystemm including tool breakage control. For measurment rotating tools of dia. 0,2 mm by dia. 16mm in the machine. Minimum tool length 45 mm. Tool presenting lapse. Preparation for graphite- extraction L-CUT for vacuum extraction system, consisting of enclosure, roof and pipe union. Graphite extration system. Included preparation for graphite extraction. Air throughput rate approx. 1400 m3/h. Motor output 2,2 kW, noise level approx. 73 dB (A). Rest dust content in exhaus air= max. 0,5 mg/m3. Dust contents are 15 times lower than the MAK values. Sound absorber fo L-CUT. Reducing of acoustic pressure level for approx. 9 dB (A) Remote control Heidenhain. Manual control with setup functions, electric hand wheel and enable button. Cooling system Hydac for spindle. Automatic lubrication system. Additional LED workroom lamp. Oil mist lubrication unit. Language English (system) Infrared probe Renishaw OMP 400 HSK 40 Hsdpfx Abezpybwjtot The machine will be disconnected and dismantled on 16 September 2026. Until then, it will remain connected and in active production. In July 2026, the ball screws, including the bearings, were replaced on the X and Y axes. All spindle filters and oil were also replaced. Our company is an authorized Exeron dealer and service partner. Therefore, the machine will be professionally disconnected and prepared for transport. The price also includes professional loading onto the truck and securing the machine on the truck for transport. The machine dimensions do not include the graphite extraction system. The complete layout is provided in the attached document.

Condition: used, This listing is for 1 of 3 Watson Marlow 620S/R Peristaltic Pumps The units are in full working condition and ready for immediate use Design & Functionality The 620S/R model is part of the 600 Series of cased peristaltic pumps featuring a brushless DC motor equipped with digital keypad control (620S) and a sturdy NEMA 2 / IP31 vented, wipe‑down enclosure suited for dry industrial environments ,It operates at dual voltage (100–120 V or 200–240 V, 50/60 Hz) and includes features like MemoDose for one-shot dosing and wireless guard-switching for safety The casing is chemically resistant, with powder-coated die-cast aluminium construction and an easy-to-clean membrane keypad Pump Performance Flow range: 0.00026 to ~4.23 gpm (equivalent to ~0.001 to 16 L/min) with the 620R pump head With newer 620RE LoadSure heads, the flow increases up to ~4.76 gpm (0.004–18 L/min) Pressure capability: Up to approximately 60 psi (4 bar) with the appropriate head and tubing Control accuracy: Exceptional 2,650:1 turndown ratio, fine speed control from 0.1 to 265 rpm in selectable increments (0.1, 0.5, 1, 2, 5, or 10 rpm), with 0.1% speed accuracy Pump Heads & Tubing The model supports the following interchangeable pump heads: 620R Mk II (continuous tubing, two rollers) 620RE and 620RE4 (LoadSure elements, two or four rollers) Hsdpoxhdx Defx Abtst These heads are compatible with various tubing materials (e.g., Marprene™, Bioprene™, Sta‑Pure™, silicone) and sizes (typically 6.4 mm to 17 mm inner diameter) The 620RE and RE4 heads feature retractable rollers for easier cleaning (CIP/SIP) and rapid loading AFAB Lab Resources - Used Lab Equipment Physical Attributes & Construction Ingress Protection: IP31 (NEMA 2) for the standard 620S/R; there are IP66/NEMA 4X variants (e.g., 620SN/R) for environments requiring better dust and water resistance Weight: Around 19.6 kg (with 620R/RE head) to 20.1 kg (with 620RE4) Sound level: Less than 70 dB(A) at 1 m—relatively quiet for continuous industrial operation Advanced Features MemoDose: Delivers precise single-shot volumes—ideal for dosing applications Ramp function & non‑drip: Ramp improves handling of delicate fluids, preventing splashes/frothing, while non-drip minimizes residual drips at dose end (noted in related Di versions but often included in feature suites) Data export: Some models (e.g. 620S/RE) support RS‑232 export of batch records—important for GMP compliance

Condition: new, Year of construction: 2026, DCV4500 VIBER – Modern Industrial Dust Extraction System with Automatic Filter Cleaning The DCV4500 VIBER is a modern industrial dust extraction system designed for continuous, efficient, and quiet operation in demanding woodworking environments. The unit ensures stable extraction performance throughout the entire operating cycle, minimizing the risk of efficiency losses and production downtime. Main Advantages of the Machine VIBER system – automatic filter cleaning without interrupting operation. Full upper enclosure – significantly reduces noise and vibrations. Extraction capacity of 4500 m³/h – ensures effective dust removal even with several machines operating simultaneously. Highly sealed system design – prevents heat losses and guarantees clean air in the production hall. New safety protection system – improves operational reliability. Metal rotor – dynamically balanced for quiet and vibration-free operation. Design and Technology The machine is based on a reinforced, hardened steel construction. Its compact dimensions allow the extractor to be installed close to a wall or between machines without limiting the available working space. Metal waste containers equipped with viewing windows and a mobile system enable quick emptying and easy monitoring of filling levels. Service doors provide convenient maintenance access and simplify the replacement of filter bags. Precision and Work Efficiency The dust extraction fan used in the DCV4500 VIBER provides an air suction speed of 28–32 m/s. Thanks to the specially designed rotor blade geometry, maximum efficiency is achieved with minimal energy consumption. At the same time, filtration down to 5 microns effectively captures fine dust particles, improving workplace air quality and enhancing the final quality of processed materials. Applications The DCV4500 VIBER is an advanced central dust extraction system ideal for: woodworking plants, furniture manufacturers, producers of wooden components. It efficiently supports machines such as sanding machines, panel saws, edge banders, and other equipment generating large amounts of dust and chips. Its reliable operation makes it suitable for both serial production and intensive industrial use. Standard Equipment Control cabinet with ON/OFF function 18 polyester filters with filtration efficiency down to 5 microns Metal waste containers with viewing windows Full sound-insulated enclosure Optional Equipment HEPA filters for filtration of particles below 5 microns Ceiling-mounted duct systems for multiple machines Equipment for operation with container level sensors Technical Specifications Parameter Value Motor power (S1) 3.0 kW Hodpfxsuc Unqs Abtet Power supply 400 V / 50 Hz Motor speed 3000 rpm Extraction capacity 4500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 200 mm Air velocity 28–32 m/s Filtration area 6 m² Number of filters 18 Filter material Polyester, 5 microns / filter category "G" Dimensions 752 × 1502 × 2200 mm Weight 220 kg

Condition: new, Year of construction: 2026, SCV15000TC VIBER BIG-BAG is a professional industrial dust extraction system designed for large woodworking facilities and industrial production lines. Equipped with two high-capacity BIG-BAG containers, it ensures maximum operational continuity and simplified handling while minimizing downtime. It is an ideal solution for extracting sawdust and dust from high-demand machinery requiring highly efficient air filtration. Key Advantages Capacity of 15,000 m³/h – ensures effective extraction even in the most demanding industrial applications 18.5 kW power output – high-efficiency S1-duty motor designed for continuous operation in harsh conditions VIBER system – automatic filter shaking system extending filter lifespan TC housing – fully sound-insulated enclosure reducing noise and vibration Two BIG-BAG containers – significantly increased waste capacity and more convenient unloading REHEAT – heat recovery system from exhaust air, reducing energy losses DAMAGE PROTECT – mechanical protection of the impeller and suction duct against damage caused by large objects Construction and Technology The SCV15000TC VIBER BIG-BAG is built on a rigid steel structure designed for intensive use in demanding industrial environments. The chip extraction fan features a dynamically balanced impeller with aerodynamically optimized blades, ensuring consistently high performance with low noise levels. The filtration unit consists of 117 polyester filter cartridges with a filtration surface area adapted to intensive dust extraction processes. Precision and Performance Thanks to high vacuum pressure and a large inlet diameter (400 mm), the extractor efficiently removes chips, dust, and sawdust from multiple workstations simultaneously. The design allows operation as a central extraction system, enabling full integration with an entire production line. High energy efficiency and the automatic filter cleaning system significantly reduce the need for frequent servicing, lowering operating costs. Applications Hjdpfx Ajup Difobtet The SCV15000TC VIBER BIG-BAG is recommended for operation with: panel saws and sliding table saws wide belt sanders edge banders and CNC milling machines automated woodworking and wood-based material processing lines Standard Equipment VIBER automatic filter cleaning system Polyester filters (117 pcs) TC sound-insulated housing DAMAGE PROTECT protection system Control cabinet with main switch Two BIG-BAG containers with support frames Optional Equipment HEPA filters for particles below 5 microns Bag fill level sensor Automatic shut-off valve Spark detection and fire suppression system Technical Specifications Power supply voltage: 400 V Motor power: 18.5 kW Rotational speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Filtration area: 59 m² Number of filters: 117 pcs Inlet diameter: 400 mm Capacity: 15,000 m³/h Vacuum pressure: 3000 Pa Air velocity: 40 m/s Noise level: 80 dB Number of BIG-BAGs: 2 pcs BIG-BAG capacity: 1250 L each / 2500 L total Dimensions (L × W × H): 3850 × 1500 × 3800 mm Weight: 1150 kg

Condition: excellent (used), Double side - Independent Machine (1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 10 (ca.) / 60 Working width (min/max) mm 260 (ca.) / 3200 Hedpfjzmfg Tox Abtet Numerical Control MAESTRO PRO EDGE /Software EYE-M Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) with CNC vertical adjustment Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side + Glueing Unit (PUR Glue + Quick Melt system) CNC adjustment of the edge height Band Pressure zone (N.C. adjustment) + Edge coils support (No 6 reels) CNC positioning of the edge Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C. adjustment) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Milling grooving unit U (1 x Kw 5,5) on Left-side Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 Working width (min/max) mm 236 / 1300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 / 50 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling Unit (vertical Joint Trimmers) 08. 0555 max. 3° (2 x 1 kW) Free space EDGE-BANDING PART (for each side): Hsdpfxedh Tfge Abtst Glueing Unit (Hot Melt Glue + Quick Melt system) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 6 Rough Trimming unit 08. 0555 (2 x 1 kW) max. 3° Fine Trimming unit 08. 055 (2 x 0,66 kW) 30° + 30 m/min Glue scraping unit 08.517 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0,18 kW) Free space

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) Hjdpfx Aoifnxxjbtot EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 230 / 1600 (ca.) Numerical Control / Software WinEdge Adjustable feeding speed (m/min ) 10 - 30 Safety and sound-proof enclosures/cabins SIZING PART (for each side): No. 2 Hogging Units (2 x Kw 5,8 ca.) No. 2 Milling units (2 x Kw 4 ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt glue + Multing Unit) Pressure zone (adjustable by CN) Edge coils supporting unit (No. 6 reels) Rough Trimming unit (2 x Kw 1 ca.) Fine Trimming unit 08.055 (2 x Kw 0,5 ca.) 0°-30° No. 5 Milling grooving units (5 x Kw 4 ca.) Profile Scraping unit Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit + Hot Air Heater (to reactivate the color of plastic tape) Hedsl Hydmepfx Abtot

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 250 / 1300 Hodpfxjxggthe Abtet Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (PUR. Glue + Quick Melt system + EVA Glue) VTG 3-24 + 283.201 + 283.19 + 283.203 Pressure zone Edge coils supporting unit (No. 24 reels) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Profile Scraping unit 08.515 Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) No. 3 Grooving units 08.190 (2 x Left-hand + 1 x Right-hand) (Kw 4,5 x 3) swivelling 90°/180°/270°

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Hjdpfx Asunrwnobtst Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.30 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Rough Trimming unit 08.055 (2 x Kw 1) 0°-30° Fine Trimming unit 08.055 (2 x Kw 0,66) 0°-30° Profile Scraping unit 08.515 Free space Buffing unit 08.617-2 (2 x Kw 0,18) Nr. 2 Milling grooving units RIGHT: 75.30 (2 x Kw 4,4) 90°-180°

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Hjdpfowhi Slsx Abtjt Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Condition: excellent (used), Double side - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 60 Working width (min/max) mm 195 / 1500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Hsdpswxwxbofx Abtot Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt unit) QA 34 (FeMa-Tech) Pressure zone (N.C. adjustment) Type "A" Edge coils support (No. 6 reels) Milling-grooving units SF 20 (HSK63F - Kw 4,5) 0°-90° CN Horizontal Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit MF 21 (2 x kW 0,55) Profile Scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 60 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40. Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 1 x Kw 4,5 Hogging Units KD 11 (2 x Kw 6,6) . Free space EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt unit) QA 34 (FeMa-Tech) Pressure zone (N.C. adjustment) "A" Hedjwxwyfopfx Abtet Edge coils supporting unit (No. of reels) 6 Snipping (end-cutting) unit HL84 (2 x Kw 0,22) 0°-30° Rough Trimming unit (2 x Kw 0,55) Multi-Profile Copying unit by N.C (fine and contour trimming) FK 13 (2 x Kw 0,4) revolver 8+8 Free space Profile Scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11 OPTIONAL: Milling grooving unit UF11 (1 x Kw 4)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 + in stips / lippings (max mm 1) Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (Joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) VTG 3-24 + 283.203 Pressure zone + Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B (2 x Kw 0,66) 30 m/min (0°-25°) Hsdjxggzljpfx Abtet Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min OPTIONAL: KFA 30 Profile Scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.604 (Kw 0,25 x 4) No. 2 Grooving units 08.190 (1 x Left-hand + 1 x Right-hand) (Kw 4,5 x 2) swivelling 90°/180°/270°

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer EasyLing Safety and sound-proof enclosure No. 3+3 Vertical columns to support the working units Hodpewhmdfsfx Abtot Min. useful working width (mm) 240 Max. useful working width (mm) 3100 Min. useful working tickness (mm) 3 Max. useful working tickness (mm) 150 Distance between center-axes of the disappearing dogs (mm) 800 Adjustable (min/max) feeding speed (m/min) 4 - 24 Total installed power No. 4 Working groups (for each machine's side): Scoring Unit Jumping Scoring Unit 1 x Kw 3 (RPM 6000) Hogging Unit 1 x Kw 6 (RPM 6000) 0-10° Jumping Milling Unit 1 x Kw 6 (RPM 6000) 0°-90° Milling-Shaping unit 1 x Kw 6 (RPM 6000) 0°-90°

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) option: mm 20 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 250 / 3000 (ca.) Adjustable feeding speed (m/min) 12 - 40 m/min (ca.) Safety sound-proof enclosures/cabins Distance (center-axes) of Disappearing Dogs (mm) 500 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4 (ca.)) Hogging Units (2 x Kw 5,8 (ca.)) Milling-Shaping unit 1 x Kw 4 (ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) Hedpfx Ajk Nk R Djbtjt Edge coils support (No 2 reels) + Band Pressure zone Snipping (end-cutting) unit (2 x Kw 0,35) ca. Rough Trimming unit (2 x Kw 1) ca. Fine Trimming unit (2 x Kw 0,5 ca.) 0°-30° Multi Function Unit (Profile contour Trimming unit) with 2 revolvers (8+8 folds) - max 27 m/min Milling grooving unit 1 x Kw 4 (ca.) (0° - 90°) Profile Scraping unit + Glue scraping unit + Buffing unit

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Hjdpfjum Untex Abtot Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins "Hopper Feeder" (panels fall directly onto the feeding chains) Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Fine Trimming unit 08.055 (2 x Kw 0,66) 30 m/min Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18) Free space

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4) Hedpfx Aswz Ic Aobtst

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips/lippings max) mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 244 / 2300 ca. Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 8 - 40 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Pre-Milling unit 75.30 (Kw 6,6 x 2) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1570 + 283.205 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Fine Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (Kw 0,66 x 2) max 25 m/min Hjdpfxofi Tkvs Abtst Corner Rounding unit (Contour Trimming) 08.465 (Kw 0,18 x 4) max 20 m/min Buffing unit 08.617-2 (Kw 0,18 x 2) Free space

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) - Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Guide Z-axe) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,3 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 30 (Kw 0,65 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0,3 x 2) max 25 m/min - ROTAX motors with automatic tool change (8+8 position store) Profile Scraping unit (Multi-profile, by N.C.) RB 30 Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Hodpfju Tg Uqjx Abtet Buffing unit SZ 30 (Kw 0,37 x 2) With ‘hopper’ for panels (useful height mm 80), as a buffer, to speed up the work cycle