Used Sound Enclosure for sale (2,373)

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Chedpfom Nntysx Addef Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: good (used), Year of construction: 2017, functionality: fully functional, Technical details core drilling diameter max. 3 - 28 mm bore depth 1000 mm control Heidenhain TNC 640 x-axis 1000 mm y-axis 800 mm z-axis 800 mm spindle head - swivable (W) +15°/-30° deg B-axis (table) 360.000° deg table surface area 1000 x 1000 mm table load 5,0 t tool taper SK 40 spindle turning speed range 60 - 6000 U/min spindle motor 12 kW total power requirement 58 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,35 x 4,75 x 3,80 m Additional information 5 axes Deep Drilling-Milling-Machine A current geometry measurement report is available. Equipped with: Chjdpexztd Nefx Addof HEIDENHAIN TNC 640 control 5 CNC AXES X – Y – Z – W – B NC rotary table 360.000 deg. Milling performance 150 cm3/min. Direct linear position measuring system Digital AC drives Table design with Hirschmann zero-point clamping system NC-controlled tilting of the deep hole drilling/milling unit (W) +15/-30 deg. Automatic tool changer for 24 tools Internal coolant supply High-pressure coolant system 1200 liters for deep hole drilling oil up to 140 bar Paper belt filter system SIEMENS extinguishing system Fire protection system Spindle cooling Oil temperature control 3D HEXAGON probe RENISHAW tool measurement Electronic handwheel OPT kinematics Chip conveyor Coolant pressure and flow control Collision and vibration monitoring Feed control Coolant gun MONTRONIX machine airbag Oil mist extraction 2 clamping plates Walk-in full enclosure with roof and opening for crane loading Included in delivery: Operating manual Documentation Machine parameters on USB stick

Condition: excellent (used), Year of construction: 2020, Nucleus Version: DX100 Depth [mm]: approx. 2000 mm Length [mm]: approx. 5400 mm Codpfoxzpc Usx Addehf Height [mm]: approx. 1990 mm Weight [kg]: approx. 1200 kg Year of manufacture: 2020 Height above floor: min. 4 mm, max. 200 mm Main voltage: 400 V ± 10%, 50/60 Hz, 3 phases, N, PE Power consumption: 8 kW Fuse: 25 A Nlobluw Djxznxuexcei Air pressure: 6 bar Welding pressure: 510 N Welding power: 1000 W Welding speed (depending on drive): Standard motor: max. 30 m/min Weld width: max. 12 mm Noise level: LpA < 80 dB(A) Sound pressure emission at the workplace (Noise measured according to DIN 45 635-48-A-1, ISO 11204, ISO 3744, ISO 4871) The Nucleus DX200 is used for manufacturing three-layer welded masks. The machine is a complete production line and includes three material feeders, one wire dispenser, and two units where the material is folded, cut, and welded.

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Chedpfxjxzprco Addof Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Year of construction: 2017, condition: used, Power: 4 kW (5 HP) Tank pressure: 20 bar Volume: 1200 l Old Lodige KM 1200 D continuous mixer with ploughshares (year 1977) transformed into a mixer-dryer (year 2017) by the previous user. Modification made : New enclosure / mixing chamber in stainless steel 316. Change of motor transmission: belt -> geared motor Main material: 316 stainless steel Year: 2017 Type of drying: hot air blowing Without electrical cabinet With piping 1 – Ploughshare mixer 1200 L Motor manufacturer: SEW Power : 18,5 KW Material: 316 stainless steel + 2 manual butterfly valves + 2 manual Orbinox knife gate valves Porthole interior view Safety box suppression (brand : Vigilex) No manufacturer’s plate 2 – Fan n°1 Manufacturer: Kiekens Model : 8 KTEN 355 Year: 2017 Volume: 1204 m3 / H Power : 15 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 3 - Fan n°2 Manufacturer: Kiekens Model : 8 KTEN 280 Year: 2017 Volume: 1204 m3 / H Power : 4 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 4 – Heat exchanger Manufacturer : Bronswerk heat transfer B.V Year: 1996 Exchange surface: 67 m2 x 2 Max pressure : 20 bar Codpfx Adsx Au Rgedjhf Max. temperature: 215°C Fluid : water or steam Volume : 17 L x 2 Temperature sensor connection 5 – Dust collection cyclone Year: 2017 With DMN Westinghouse rotary valve (type : butterfly) On frame 6 – Platform with stairs and mixer support Manufacturer: IJSSEL technology

Condition: good (used), Year of construction: 2010, functionality: fully functional, new container with completely new layer PU-cover with ca. 6mm cover thickness Csdpfx Ajt Ahqyoddohf usable volume: 165 liter trough inner measures: 1100mm x 460mm x 525mm empty weight: ca. 850kg motor speed: 1500 rpm sound insulating cabinet extern dimensions: 1900mm x 1250mm x 1550mm band filter device Seitz

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape Cjdpfxsd Ab Uuj Addshf aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Machine-Details: Stock-No. 1022-2413 Type of machine Lathe - cycle-controlled Make SEIGER Type SLZ 700 E x 3000 Year of manufacture 2005 Type of control CNC Storage location Germany Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 Additional information: Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Codpfjxzp Nzjx Addshf Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Work area enclosure with two sliding doors. The machine is sold without a boring bar holder and boring bar.

Condition: excellent (used), Year of construction: 2020, overall weight: 1,200 kg, total length: 5,400 mm, total height: 1,990 mm, Nucleus Version: DX100 Depth [mm]: Approx. 2000 mm Length [mm]: Approx. 5400 mm Height [mm]: Approx. 1990 mm Weight [kg]: Approx. 1200 kg Year of manufacture: 2020 Chedpfjxznxuox Addsf Height above floor: min. 4 mm, max. 200 mm Main voltage: 400 V ± 10%, 50/60 Hz, 3 phases, N, PE Power consumption: 8 kW Fuse: 25 A Air pressure: 6 bar Welding pressure: 510 N Welding power: 1000 W Welding speed (depending on drive): Standard motor: max. 30 m/min Weld width: max. 12 mm Noise level: LpA < 80 dB(A) Sound pressure emission at the workstation (Noise measurement according to DIN 45 635-48-A-1, ISO 11204, ISO 3744, ISO 4871) The Nucleus DX200 is used for producing masks welded from three layers. The machine is a complete production line and includes three material feeders, one wire dispenser, and two units where the material is folded, cut, and welded.

Condition: ready for operation (used), functionality: fully functional, input voltage: 480 V, input current: 110 A, type of input current: AC, input frequency: 400 Hz, Manufacturer / Model: Telemecanique / Schneider Electric – Altivar 21 (units: SVRTV-7-1 / SVRTV-7-2) Application: Motor speed control for industrial fans and pumps (HVAC / ventilation / process air). Technical data: Power rating: 55 kW / 75 HP Supply: 380–480 V AC, 3-phase Input current: ~105–110 A Frequency range: 0.5–400 Hz Control mode: V/F (voltage/frequency) control Interfaces: Modbus, analog inputs Operating modes: LOC/REM (local/remote) Enclosure rating: IP20 / IP21 Integrated HMI with RUN/STOP, MODE, ENT, navigation keys Quick setup parameters (ACC/DEC, frequency limits, thermal protection, V/F curves) Clean internal components; installed in HVAC/air-handling applications Condition: Excellent condition; clean enclosure, functional HMI; normally used for supply-air fan drives. No visible damage. Chodpfx Aoxzdpcsddsf

Year of construction: 2019, condition: used, Power: 1 kW (1 HP) Manufacturer : ACS Instrument Model: 7400S Year : 2019 Type : Leak test bench / automatic and autonomous leak detector Chsdpfex Atlvex Addof Application: Integrity test for flexible containers (flexible packaging, pouches, envelopes, etc.) EM delta P: +- 5000 Pa Pressure test: -55 hPa to 950 hPa Motor power : 0,75 kW The cup is placed in a sealed enclosure. A vacuum is applied in the enclosure, causing the cup to inflate. The inflated cup is clamped between the two horizontal walls of the enclosure and exerts a force on the internal pressure sensor. The force exerted on this sensor is the image of the internal pressure of the cup. The leak test consists of measuring a variation in the force on the internal pressure sensor between the start and end of the stage. A touch screen for controlling and setting the instrument parameters. A USB key for exporting results. Documentation available

Year of construction: 2017, condition: used, Disc EDM machine for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard materials. Workpieces are mounted vertically. Accessories: Total enclosure External PC incl. CAD/CAM and ExLevel Pro software Software package with additional functions for metalworking tools, Wheelchanger for up to 6 eroding/grinding discs, Adaptation to A-axis on HSK 63-A-E Chodexy Ry Sepfx Addef Coolant system with pump & cooling unit Automatic central lubrication Automatic fire extinguishing system Automatic shut-off flap Glass scales on the X, Y & Z linear axes, Mechanical mist separators N280, 3 grinding wheel change elements Test mandrel HSK63A. Also available with workpiece magazine as an option! Workpiece outer diameter: max. 320 mm Tool outer diameter: Max. 200 mm workpiece length: max. 250 mm Bore diameter: Max. 60 mm Travel path X1: 520 mm Travel path Y1: 970 mm Travel path Z1: 420 mm Rotation range axis A1: 360° Rotation range axis B1: +/-20° Rotation range axis E1: 210° Grinding spindle speed: stepless 0 - 4500 rpm (torque 6Nm) Connected load: approx. 8.7 kVA/ 6.8 kW mass: approx. 7100 kg Dimensions: W x D x H = 4012 x 2889 x 2611 mm colour: RAL 7047 telegray 4 / RAL 7045 telegray 1

Condition: new, pressure: 60motor: 11daylight: 450stroke lenght (max.): 400table diamension: 600 x 500 x 80tappet area: 600 x 500 x 90table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.700weight approx.: 4.000oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 150mm. Auxiliary cylinder: 2 pcs. Ø 60 x 40mm. Auxiliary guide: 2 pcs. Ø 40mm. Motor: 7,5kw. - 11hp. ( IE-3 ) Pump: 18cc. - 26Liter / ASC. Speed : flow 110mm./sec. - return 120mm./sec. - Pressure : 11mm - 5./sec. Installation height: 500mm. Codpfxsmmuq Io Addshf Stroke length: 400mm. Table top: 600 x 500 x 80mm. - (with T - grooves) Plunger plate: 600 x 500 x 90mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 7 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Year of construction: 1999, condition: good (used), Mono pump, metering pump, high-pressure pump, water pump, screw pump, progressive cavity pump, transport screw, screw conveyor, conveying technology, tubular screw conveyor, metering screw, screw metering Chodpfxoxy I Hpo Addjf -Manufacturer: Resch, dosing screw type RBL50D -Dosage: stepless, with frequency-controlled operation -Drive motor: 2.2 kW -Dosing control: Ströter Speed Commander Vector Digital -Inlet/outlet opening: Ø 80 mm, see photos -Usage: The pump was used to dispense ultrasound gel -Transport dimensions: 1810/730/H270 mm -Weight: 152 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 5,280 h, load capacity: 1,600 kg, lifting height: 5,000 mm, fuel type: electric, mast type: triplex, battery capacity: 575 Ah, empty load weight: 3,322 kg, total height: 2,220 mm, total length: 2,040 mm, total width: 1,050 mm, Forklift type: Electric forklift Product code: 10748 Manufacturer: TOYOTA Model: 8FBMK16T Year: 2017 Lifting capacity, kg: 1600 Mast type: Triplex Lifting height, mm: 5000 Operating hours: 5280 Country: Italy Weight (kg): 3322 Dimensions (L x W x H, mm): 2040 x 1050 x 2220 Overall height, mm: 2220 Attachments: Side-shift forks Battery: 48V/575 Ah Csdpfjxixbisx Addshf Note: The forklift is inspected - technically sound. Full technical service will be carried out before delivery.

Condition: as good as new (ex-display), Year of construction: 2025, GT 40 - The OPTIMUM premium NC sanding machine with Siemens touch screen. - Electromagnetic clamping plate for fixing the workpiece with automatic demagnetization function - High-quality spindle with precision tapered roller bearings - Hardened and ground table guideways - Turcite-B coated counter guides for high wear resistance and low friction - Grinding spindle with high-quality precision bearings - Grinding wheel can be resharpened directly on the machine using a sharpening device - Digital position indicator - Machine base made of sturdy torsion-resistant cast iron for maximum rigidity and stability - Guideways for longitudinal, transverse and vertical movements are backlash-free and self-centring as V and flat tracks - Precision recirculating ball screws - Guideways and transport spindle with central lubrication - All flat guides are finely scraped and thus guarantee maximum precision of all manual movements B9errbkz8v - Safety electrics with 24 V DC voltage - Large decoupled handwheels in all three axes - Hydraulic lines according to DIN EN 853 - Grinding accuracy: 0.005 mm - Grain 46 corundum grinding wheel for all common steels - Swivel-mounted control panel makes work considerably easier - Separate hydraulic unit with heat exchanger, avoids vibrations and thermal stress - Two-channel safety electronics - Grinding table splash guard - EMC filter class - With IE3 motor - consumes considerably less energy, resulting in significant cost savings Dimensions and weights Length approx. 3600 mm Width/depth approx. 2400 mm Height approx. 1900 mm Weight approx. 3600 kg Electrical data Total connected load 7.5 kW Supply voltage 400 V Mains frequency 50 Hz Chjdpfxoxyhvko Addef Surface grinding table Clamping surface length 400 mm Clamping surface width 800 mm Grinding wheel(s) Outer diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 min¯¹ Concentricity 0.005 mm X-axis Feed speed 5 - 25 m/min Digital position indicator Coolant device Balancing mandrel Grinding wheel grit 46 Diamond pin Operating tool Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Equipment Electromagnet clamping plate Splash guard table enclosure Demagnetizing device Parallel dressing device ✔ Coolant device 125 W Work light LED lamp Alignment feet ✔

Condition: ready for operation (used), functionality: fully functional, Actuator for Ball Valve (EX Limit Switch) Brand / Model: Masoneilan / Dresser (USA) – Compact II actuator + SV12-111114 limit switch (ATEX Ex d IIB T6, IP66) Application: Automatic opening/closing of ball valves in gas, air, steam, or liquid service (electric / pneumatic control). Technical Specification Operating pressure: ≤10 bar Torque: approx. 80–150 Nm (depends on actuator size shown in photos) Temperature range: –40…+85 °C Electrical signal: 30 VDC, 4–20 mA Protection: ATEX / EX certified, flameproof enclosure (Ex d) Ingress protection: IP66 Limit switch: Masoneilan / Dresser SV12-111114 (EX d IIB T6) Typically supplied with: stainless-steel ball valve (DN/PN depending on installation) Cedpjxy Rn Nsfx Addohf Condition Very good mechanical state Stainless flanges clean and tight Proper sealing and no corrosion on EX housing Photos confirm intact labels, clear ATEX marking, and correct installation orientation

Year of construction: 2015, condition: used, Disc EDM machine for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard cutting materials. The workpieces are mounted vertically (suspended). Accessories: Total enclosure, Software for woodworking tools Software for P-system peeling cutters Software for scoring saws/radius cutters Software for 360° path programme Software for 360° peeling cutters Workpiece magazine N250 (pallet magazine for max. 28 workpieces), Disc changer for up to 6 eroding/grinding discs, Adaptation to A-axis on HSK 63- F, Coolant system with pump & cooling unit Automatic central lubrication Automatic fire extinguishing system Automatic shut-off flap Gripper fingers for workpiece automation, 4 workpiece holders for workpiece magazine, 1 exchange element with flushing kit, Mechanical mist separator N183, Test mandrel HSK63F. Maximum workpiece outer diameter.: 320 mm workpiece length: max. 250 mm Travel path X1: 520 mm Bore diameter: Max. 60 mm Travel path Y1: 970 mm Travel path Z1: 420 mm Rotation range axis E1: 210° Grinding spindle speed infinitely variable: 0 - 4500 rpm. Codpfxexy Ryrj Addjhf Rotation range axis A1: 360° Rotation range axis B1: +/-20° Connected load approx.: 8.7 kVA / 6.8 kW (400 V/50 Hz) Weight approx.: 7100 kg Dimensions L x W x H: 4012 x 2889 x 2611 mm colour: RAL 7047 telegray 4 / RAL 7045 telegray 1

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Cedpfx Adowiatiodjhf Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: used, Year of construction: 2003, Ingersoll Rand ML45 air compressor (2003), 2 units available. Condition: Used, technically sound, currently disconnected. Manufacturer: Ingersoll Rand (USA) Model: ML45 Year of manufacture: 2003 Quantity: 2 units Chodpfx Adjxu Achedjf Reliable industrial screw compressors designed for the stable supply of compressed air across various industries – manufacturing, metalworking, pneumatic tools, and automation systems. Key technical specifications (according to Ingersoll Rand ML45 catalogue): - Rated power: 45 kW - Air delivery: approx. 7.5–8.5 m³/min (depending on pressure) - Working pressure: 7–10 bar - Compressor type: oil-lubricated screw - Drive: direct - Power supply: 400 V / 50 Hz - Cooling: air-cooled system - Noise level: approx. 72 dB(A) - Compressor weight: approx. 900 kg Condition description: Both units are currently disconnected but were operational prior to shutdown. Operating hour readings are unknown. Visually – in good technical condition, no damage.

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Automatic central lubrication Extraction system, Measuring probe Machine lamp Workpiece carrier SK 40 Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Codsxy Rx Ispfx Addohf Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043

Condition: new, pressure: 125motor: 22daylight: 500stroke lenght (max.): 400table diamension: 800 x 600 x 120tappet area: 800 x 600 x 300table height: 850messurements (LxWxH): 1.600 x 2.000 x 3.200weight approx.: 7.000oil filling: 400 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 220mm. Auxiliary cylinder: 2 pcs. Ø 70 x 40mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 15kw. - 22hp. ( IE-3 ) Pump: 48Liter / ASC. Speed : flow 120mm./sec. - return 140mm./sec. - Pressure : 13mm - 5mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 x 120mm. - (with T - grooves) Plunger plate: 800 x 600 x 300mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting Codpfxomr Hpcs Addohf 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Automatic central lubrication Extraction system, Measuring probe Machine lamp Workpiece carrier SK 40 Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Cedpfx Aoxy Rxhoddehf Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Chsdpfxstqwtdo Addjf Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Condition: used, Year of construction: 1999, Description: Suitable for grinding spiral and straight-fluted tools as well as for surface grinding using fixed pre-programmed standard grinding programs. Accessories: Total enclosure Glass scales on the X and Z linear axes PSM 118 measuring and positioning probe for spiral pitch and breast bevel Stepless speed control Manual central lubrication Wet grinding device 1 grinding wheel guard Chodexy N A Eepfx Addsf Machine light 2 grinding wheel flanges. Hub X-axis (NC): 360 mm stroke Workpiece spindle holder A-axis (NC): SK 50 Y-axis stroke (manual): 250 mm Grinding spindle speed infinitely variable: from 2000 - 9000 rpm Z-axis stroke (manual): 300 mm drive power grinding motor: 2.2 kW Grinding wheel diameter: Max. 200 mm mass: about 1600 kg Connected load: 2.2 kW (400 V / 50 Hz) Dimensions W x D x H: approx. 1395 x 1565 x 1990 mm colour: Grey