Used Sound Engineering for sale (17,580)

Condition: used, Year of construction: 2014, functionality: fully functional, Single-shaft machine. Itodpfxex Anq Hj Aqpjg Dimensions of the feed hopper: 1300 x 1400 mm. Hydraulic pusher with adjustable pressure and speed, depending on the power consumption of the rotating drum. Drive via gear motor with V-belt. Robust rotor made of certified construction steel. Rotor width: 1300 mm. Hopper length: 1400 mm. Rotor diameter: 368 mm. Main motor power: 30 kW. Teeth and counter-blades made from wear-resistant material. Replaceable reversible blades. Dimensions of reversible blades: 40x40x20 mm. Replaceable screen basket. Total weight: approx. 3,100 kg. Supply voltage: 380 V – 50 Hz.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Itjdpfsynzg Hjx Aqpjg Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Year of construction: 2023, condition: as good as new (ex-display), Technical data: Inlet width mm. 650 Chopping height mm. 300 Output approx. 70 - 80 srm/h wood chips Chipping length approx. mm. 25 to 30 Infeed rollers piece 4 Rotor flight circle mm. 800 Chipping knife piece 2 counter knife piece 1 Feed motors kW 2x4,0 with cardan shaft weight approx. 7.000 Kg. infeed : horizontal Machine base : steel, gas-shielded welded Rotor : steel, inert gas welded, dynamically balanced. Bearing : Oversized roller bearings. Bearing housing : steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Hydraulic system consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding by 2 gear motors, direct engagement, NORD GEAR. Itjdpfxjncd Duo Aqpsg

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Itedpfx Aqoncd Azjpjg Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: new, MAIN FEATURES OF THE MACHINE: -Single-head drilling machine for drilling in the range of 0 - 90 ° -The inclination angle of the head is pneumatically adjustable -Possibility to set the side stops with an accuracy of 0.1 mm -Security handles allow the panels to be quickly positioned without adjustment -Patented pneumatic material clamps -A cast iron head that guarantees damping of all vibrations - MDF work table -Quick and accurate adjustment -Precise drilling -Quick change of drills with quick couplers -Spiral System- a device for quick adjustment of the drilling depth Technical data: Number of spindles: 29 Distance between first and last drill bit: 896 mm Distance between centers of individual spindles: 32 mm Number of pneumatic clamps: 2 Max workpiece size: 1142 x 3000 mm Max element thickness: 70 mm Working pressure: 6 - 7 bar Noise level: 76.1 dB Air consumption: 10 l / cycle Engine power: 1.5 kW Revolutions: 2800 rpm. Overall dimensions: Length: 1507 mm Iedpfsh Dzr Ajx Aqpjtg Width: 960 mm Height: 1265 mm

Condition: like new (used), Year of construction: 2015, functionality: fully functional, volume flow: 1,800 m³/h, power: 0.55 kW (0.75 HP), ambient temperature (max.): 80 °C, Active Carbon Filter Extractor 0.55kw 1800m3/h Air Filter Smoke Extractor FAN ENGINEERING Active Carbon Filter Cartridge + Filter Blanket Extractor Tower Smoke, Air Filter for Sale Active Carbon Filter Cartridge 16pcs 5 Bag Filter Blanket. Power: 0.55kw 50Hz Air Delivery: 750-1300m3/h Direct Drive FAN ENGINEERING Explosion-Proof Duct Fan. Itsdpfx Ajxvivkoqpeg Extractor Filter Length: 1650mm Width: 530x460mm Weight: 150kg. Hanging Frame. Galvanized Steel Filter Housing.

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m transport measurements machine: 2,6 x 1,8 x 1,0 m Iedpfx Aou Ibu Rsqpstg Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm -13 holes of size Ø 48mm Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough *

Condition: new, Year of construction: 2020, SEE photos + PDF layout ATTACHED Itodpfx Aeypb U Tjqpsg 1 NEW CSP Aut. complete parquet shrink foil packing line (year 2020) never in use. TOTAL LINE consisting of: roller track + industrial parquet scanner + strapping machine + shrink foil packing line AVM 700 + roller conveyor + heating unit + aut. labelling + collect accumulator with double lenght cross conveyor. (see pdf layout)

Condition: new, functionality: fully functional, A new log step feeder will be made to order based on your technical requirements. Iedsyfmn Rjpfx Aqpotg

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence Isdpfx Aert U Nueqpetg of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 1985, condition: used, For sale Batch annealing furnace – completely customs refurbished in 2010. With 2 furnace lids made of stainless steel – new ( 2020 and 2025). Original manufacturer : LEE WILSON ENGINEERING Company. CLEVELAND OHIO Iedpfx Ajyqyf Hjqpstg 3m diameter x 3 m height size of charge Protection Gas: HNX (Nitrogen-Hydrogen) -Pression in cover :8 mbar. Fan rotation:750r/min. Cooling: Air jet cooler (Max 60°c/hour depending on the charge) The atmosphere can be changed, currently at 95/5% H N. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2015, condition: good (used), Able Engineering 500L Tank Chocolate Tank 2015, Stainless, 500L capacity, jacketed mixing tank, Top mounted agitator, central bottom discharge into jacketed Rotan Pump all mounted on skid with load cells, 3Ph Isdewwp Tzopfx Aqpetg

Condition: excellent (used), kay engineering 600 litre jacketed cooking vessel with side wall scrape and emulsifier. On weigh cells. All S/s. Was previously doing soups with particles and smooth soups without particles. Itodpeu Aud Isfx Aqpsg

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Itjdpfexcal Aox Aqpeg

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. Isdpfoxcalcjx Aqpetg The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.

Condition: ready for operation (used), There are two pipe pasteurisers available, including storage tank, capacity: 7000l. Itjdpfx Aogi Nxaeqpjg

Year of construction: 2018, condition: ready for operation (used), Rotation axis: 360°, max. rotational speed: 60.000/min, including accessories and documentation. Itsdpfxoihp Ipo Aqpeg

Condition: repair required (used), feed hopper / buffer hopper Iodpfx Ajwydmnsqpetg

Condition: new, functionality: fully functional, overall weight: 1,300 kg, Year of construction: 2025, Mobile vibrating screener on a trailer of category O2, can be supplied with lifting chains and a petrol generator. Very easy to use. Quick change of meshes. Built-in conveyor for fine fraction. Itodexpg I Rspfx Aqpeg

Year of construction: 2025, condition: new, Trommel screen with built-in conveyors for medium and undersize fraction. Double drum, 3 fractions. O2 trailer Iodpfxsv D E Hxs Aqpstg

Condition: new, functionality: fully functional, overall weight: 2,800 kg, Year of construction: 2025, Double deck screener on its own O2 category chassis for easy transport. Change from transport to work position within minutes. Diesel aggregate. Itjdpfexpgytex Aqpsg

Condition: new, functionality: fully functional, overall weight: 650 kg, Year of construction: 2025, Compact dimensions and easy exchange of meshes. Great performance. For easy handling, it can be moved with lifting chains or by using a forklift. The meshes are made of high-quality spring steel. The high-strength steel construction ensures maximum stability. Itsdoxpg Epjpfx Aqpog

Condition: new, functionality: fully functional, Year of construction: 2025, Bucket Screen buckets for screening all loose materials. 8mm and 16mm sizes of screened fractions, both of which are already included in the price of the bucket. HARDOX as standard on the most used parts of the bucket. ANTISTICK the non-stick surface of part of the bucket, for faster and easier work. Ijdpfxoxpg Tge Aqpotg Various sizes, 2,3,4,5 or 6 shaft buckets

Condition: new, functionality: fully functional, overall weight: 1,900 kg, Year of construction: 2024, Introducing the Traserscreen DB-40LC – The Ultimate Screener for Unmatched Efficiency! Transform your material screening process with the Traserscreen DB-40LC. Engineered for excellence, this high-performance screener offers unparalleled durability, precision, and speed, making it the perfect choice for professionals in landscaping, construction, and agriculture. Key Features: Robust Design: Built to withstand demanding environments and heavy-duty use. Hopper width: 2657mm. Itedjt Ebphjpfx Aqpjg High Efficiency: Achieve faster, cleaner results with advanced screening technology. Screening 15-60t/h. User-Friendly: Easy setup and operation for maximum productivity. Weight 1900kg.

Year of construction: 2025, condition: new, functionality: fully functional, Bucket Screen buckets for screening all loose materials. 8mm and 16mm sizes of screened fractions, both of which are already included in the price of the bucket. Iedpfxev D Hb Dj Aqpetg HARDOX as standard on the most used parts of the bucket. ANTISTICK the non-stick surface of part of the bucket, for faster and easier work. Various sizes, 2,3,4,5 or 6 shaft buckets