Used Special Machines for sale (71,932)

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: C111707, Reconditioned Production Ready！ Ref No: 1026 Emmegi Comet T5 Work centre CNC with 3 controlled axes, used for the working of bars or aluminium, PVC, light alloys in general and steel pieces. It has two functioning methods: only one work area for bars up to 7.7 m long or two independent work areas with piece load/unload while machine is working. It has an 8 place tools storage on board the X Gjdpfxjzlat Sj Amxoiw axis slide, able to host 2 angular units and one milling disc, to perform work on the 5 sides of the piece. It also has a mobile work surface that facilitates the piece loading/unloading operation and significantly increases the workable section.

Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS GEAR HOBBING MACHINE GHM 2500 CNC Description of the main components of the GHM 2500 machine The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns. The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head. The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip. The milling/gearing unit is provided with three translation axes and two rotation axes, as follows: -X axis: longitudinal/radial movement towards the workpiece axis -Y axis: vertical movement of the gearing head -Aza Z: tangential movement of the gearing head -Axis: inclination +/-45 degrees of the gearing head -Axis C: rotation of the main axis of the gearing head The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part. 1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke. 4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3. 5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3. 6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate. 7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission. Giodpfx Amsy A Ngloxow 8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3. 9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5.

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need for additional installation. Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Gijdpoikivmsfx Amxsw Repositioning accuracy: ±0.02mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2026, -TFON Lite SURFACER® Series The TFON Lite SURFACER® Series enables simultaneous processing of multiple parts, offering unmatched versatility through a range of consumable options and an efficient vacuum table system. Designed for ease of use, it features quick brush changes and the capability to mount two different brushes tailored to your specific applications. -With brushes mounted parallel to the table, the system guarantees flawless grinding performance with every use. Ergonomically engineered, the motor weight is supported by the machine frame itself, significantly reducing operator fatigue and improving workplace safety. -Backed by TFON’s trusted guarantee, the SURFACER® Series strikes the perfect balance between minimizing operational costs and maximizing finish quality. Gjdpfxoqzxhys Amxoiw Key Specifications: -Minimum Material Size: 80 × 80 mm. Material Thickness: 3 – 200 mm. Maximum Material Width: 800 mm. Maximum Material Length: 500 mm

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: PZ131117, type of input current: AC, input voltage: 230 V, overall weight: 105 kg, input frequency: 50 Hz, Metrios MT11080 Optical Measuring Machine (2017) Gjdszhumrjpfx Amxsiw

Condition: good (used), Year of construction: 2004, functionality: fully functional, NATGRAPH UV DRYER Gjdpfoy Twkmox Amxoiw Automatic Stacker: NATGRAPH Raised Fully Cleaned

Condition: good (used), Year of construction: 2008, Mabeg Feeder SPS UV2 + C: UV Drying tunnel with material cooling Giedpfx Amsw Eb Uaexsw Automatic Stacker: SPS AUTOSTACK 2

Condition: good (used), Year of construction: 2009, operating hours: 2,140 h, functionality: fully functional, 1 kg pouch filling machine Gisdpfszdf Umjx Amxew

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Gjdpfxshv U U De Amxjiw Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2010, operating hours: 48 h, condition: good (used), functionality: fully functional, Pastry wrapping machine was purchased new in 2010 but was hardly used. Uses grease paper and PE sheets for wrapping Godpfx Amszdf A Rexoiw

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Gedpfx Amehwhfioxsiw Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, functionality: unexamined, machine/vehicle number: ML944E08, spindle speed (max.): 8,000 rpm, type of input current: three-phase, overall weight: 5,500 kg, input voltage: 400 V, CHEVALIER QP2033-L vertical machining center. The machine is available for inspection in Riga, Latvia. The machine is currently powered on and can be inspected by appointment. Giodpfx Aozfgmxjmxsw Additional photos and technical information are available upon request.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Tba8 1 lt slim. Tetra A47 cap applicator. Tetra cardboard packer 70. Gisdpfx Aey Iyc Ijmxow Easy rider Conveyor.

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. Gisdjhwhf Uopfx Amxsw With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Giodpjh Hd A Ssfx Amxjw Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2026, total width: 780 mm, total length: 1,240 mm, total height: 1,330 mm, overall weight: 480 kg, cutting diameter: 120 mm, The CBR A3 Cable Stripping Machine is specially designed to strip the outer insulation material from cables of all sizes, making it easy to remove the conductive material inside. This series offers superior performance on; steel-armored cables (SWA), double steel-armored cables, steel tapes, Gisdpoff H Imsfx Amxjw PVC-coated cables, lead-coated cables, thick rubber-coated cables, nylon-coated cables, low-grade cables, TT cables, and more. Specially processed blades with unique designs allow cables of any length to be cut and stripped for a long time without dulling the blades. All electrical and electronic components in the CBR A3 Series are Siemens brand. Our products are manufactured and certified in accordance with CE and EAC standards. Technical Specification POWER 5.5 KW CABLE DIMENSIONS 1-120 mm CUTTING SPEED 25 meter/min LENGTH 1240 mm WIDTH 780 mm HEIGHT 1330 mm WEIGHT 480 kg

Condition: good (used), Year of construction: 1972, Slideway grinding machine WMW SFBZ 2200/6000 Gsdsw U A Rmjpfx Amxoiw Manufactured by WMW Germany in 1972 Main technical data: Table size: 2240x6000 mm Max. grinding width: 2200 mm Max. grinding length: 6000 mm Max. grinding height: 2000 mm Max. workpiece weight: 15000 kg Machine weight: 130 tons The machine underwent a general overhaul in 2022. The feed boxes with electromagnetic couplings were replaced with motors and gearboxes for both heads. The bearings for the universal grinding head were also replaced. For more information, please contact us.

Condition: new, Year of construction: 2022, Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING Control Software: Bodor Pro Place of Origin: China Brand Name: Bodor Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Laser Head Brand: bodorgenius Gsdpfogyw Sdex Amxeiw Control System Brand: bodorpro Weight (KG): 2200 KG Key Selling Points: Tenon-and-mortise type plate welding structure bed Warranty: 3 years Laser power: 1000W Power supply: 110V/220V/380V 50Hz/60Hz

Condition: like new (used), functionality: fully functional, Sheet Metal Perforating Line – For Sale Complete sheet metal perforating line manufactured by Sacform, suitable for perforating sheet metal and coils up to 1,200 mm wide. The line includes: Decoiler Feeder Perforating press - 1,200 mm width 2 punching dies: Giedpfx Amozix Atexew Die 1: 3×300 (2 mm hole diameter) Die 2: 1×1,200 (3 mm hole diameter) Pull-through cutting table Recoiler

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, tube wall thickness (max.): 2 mm, bending radius (min.): 90 mm, number of axes: 3, total length: 5,500 mm, total width: 1,600 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 3 Axis 65 CNC Mandrel Tube Bending Machine TROX Liv Makina's most powerful machine is the CNC mandrel tube bending machine capable of bending tubes and profiles up to 65 mm with 3 axes, suitable for bending jobs in the Shipbuilding Industry, Thermal Power Plants, Park and Garden Furniture, Fitness Equipment, and Exhaust Industry sectors. What is difficult becomes easy thanks to hydraulic bending.  Ability to import drawings via Solidworks Program  Operation in fully automatic or manual modes via interactive PLC control system  Multiple language options  Ability to view products in 3D  3D pipe collision simulation  Automatic pipe length calculation  Conforms to CE norms  Ability to see errors on display  Safety warning system  Easy usability thanks to Livmak Interface Technical Specifications – TROX 3Axis 65 CNC Max Bending Capacity: Ø65 mm x 2 mm Min/Max Mold Diameter: 90/250 mm Material Processing Length: 4000 mm Giodozi Aiwspfx Amxsw Machine Dimensions: 5500x1750x1750 mm Total Motor Power: 15 Hp Machine Weight: 3 Tons

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, tube wall thickness (max.): 2 mm, bending radius (min.): 60 mm, number of axes: 5, working height: 1,500 mm, overall weight: 2,700 kg, total length: 5,500 mm, total width: 1,800 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 5 Axis 38 CNC Mandrel Tube Bending Machine PUMA Liv Makina’s 5-axis 38 mm CNC mandrel tube bending machine is one of the company’s models with the highest number of references spanning four continents in the Automotive, White Goods, and Defense Industry sectors. Its Solidworks-compatible interface ensures highly user-friendly operation. Our Industry 4.0-compliant machine provides daily reporting directly to your team. Thanks to its rolling die, the machine is capable of coiling tubes like a spring. Its feature of accommodating dies with 3 different radii makes even the most challenging bends much easier. The collision simulation software, which allows users to preview the bending process on-screen and helps save time, is provided free of charge on all of our CNC tube and profile bending machines.  Ability to import drawings to the machine via Solidworks  Fully automatic and manual operation modes with interactive PLC control system  Multiple language options  3D program visualization  3D pipe collision simulation visualization  Automatic tube length calculation  Compliant with CE standards  Error display on screen  Safety warning system  Easy operation via the Livmak interface Technical Specifications – PUMA 5 Axis 38 CNC Max Bending Capacity: Ø38 mm x 2 mm Min/Max Die Diameter: 60/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1600x1600 mm Total Motor Power: 15 Hp Machine Weight: 2.5 tons Gedpfxszi Ah He Amxsiw

Condition: used, Year of construction: 1975, functionality: unexamined, wheel width: 140 mm, For sale: bevel gear shaping machine, TSUNASHIMA BGS-10B, manufactured in Japan around 1975, with a maximum diameter of 140mm and a module of 2.5. Comes with some accessories. The machine requires maintenance and startup work. Price: 8500 Euro EXW. Gedpfx Aszlk D Usmxsiw

Condition: like new (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: OBX26601, warranty duration: 36 months, input voltage: 220 V, year of last overhaul: 2029, DGUV certified until: 12/2026, working width: 4,000 mm, conveyor belt width: 640 mm, type of input current: AC, total width: 1,020 mm, total length: 4,500 mm, total height: 1,450 mm, Equipment: CE marking, OBAKING Small & Medium Bakery idea choice equipments OBAKING automatic croissant making set OBX-C9000 Characteristics and stability of OBAKING puff pastries bread machines Croissant pastries dough sheeting and moulding machine The Dough press and puff pastry machine can achieve fully automatic computer-controlled Dough pressing speed, and the Dough pressing process is highly automated. It adopts a larger diameter pressure roller design, making the pressure surface softer and more uniform. PLC control system saves labor costs and time, simplifies storage configuration, reduces errors, and achieves large-scale standardized production. Gisdozdxwyepfx Amxjw Ensure that the dough is rolled evenly and there is no uneven thickness. The thickness range of the pastry can be customized according to the flavor and taste of the product The machine is also equipped with an automatic powder spreading device, which timely spreads powder according to the dough situation and controls the amount of powder spread to avoid excessive powder spreading during the rolling of the dough, resulting in uneven baking of the croissants. OR Pastries breads ,palmier products etc

Condition: excellent (used), Year of construction: 2008, operating hours: 18,500 h, functionality: fully functional, controller manufacturer: Haas, controller model: haas, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 40, Haas EC500 Giedpjziflzsfx Amxew 2008 ATC-40 tools . BT40. 2 Pallets spndel time -18500H Spindel rpm- 12000 rpm X-axis travel: 813 mm Y-axis travel: 635 mm Z-axis travel: 711 mm Pallet size: 500 x 500 mm Number of pallets: 2 Automatic pallet changer under power Located in Israel ready for inspection

Condition: ready for operation (used), Year of construction: 1984, machine/vehicle number: No.317, No.327, functionality: fully functional, operating hours: 40,000 h, grinding height: 130 mm, grinding length: 250 mm, grinding spindle speed: 3,300 rpm, grinding width: 100 mm, table length: 400 mm, table width: 225 mm, Equipment: rotational speed infinitely variable, For sale are 2 (two) sets of optical profile grinding machines Wasino type GLS-130AS, with Fanuc control, made in Japan in 1984. 1 machine is full working condition, there are videos of spindle runout and positioning X,Y accuracy measurements. Second machine serial No.327 is the same working condition, just factory worker could not start it up for us, was worked more then 1 year ago. There are accessories, tools and technical documentation for each machine. For 1 machine Wasino complete with accesories and tools, price is 18500 euro EXW stock. Preferable to sell as package 2 machines together. Godpfx Aowh Udtemxsiw