Used Spectrum Analyzer for sale (205)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Nledpoy R Nnfsfx Alhec Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: excellent (used), Here, we offer you an Iridex laser system, the OcuLight SLx. Laser IRIDEX Oculight SLx Tri-Mode 810 nm Diode Laser Description: Designed for longevity, with a thermal management system to increase the efficiency and reliability of laser conversion. Improved user interface with conveniently arranged, easy-to-understand controls. Enables easy transport between rooms and offices. The tri-mode capability offers three different laser energy delivery modes: CW-Pulse, MicroPulse, and Long-Pulse. An extremely ergonomic user interface, infrared wavelength, and a wide range of delivery systems offer a broad spectrum of treatment options. Well-suited for retinopathy of prematurity and end-stage glaucoma. The CW-Pulse mode delivers energy in single or repeated exposures. The LongPulse mode delivers laser energy over longer periods. The MicroPulse mode delivers laser energy in a series of short pulses, allowing for fine control of the thermal effects. Features: Application area: ophthalmology Amplifier medium: solid-state Ergonomics: table-top unit Wavelength: 810 nm Treatment laser power: infrared diode laser 810 nm, 0–3000 mW Target laser power: red diode laser 650–670 nm, 0 to < 1.0 mW Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, Large-Spot-SLAs, LIO and OMAs Exposure durations: CW-Pulse 10-9000 ms, MicroPulse 0.1-1.0 ms, LongPulse 10s-30 min No external air or water cooling required. Weight: 6.4 kg Length: 10 mm Width: 30 mm Height: 30 mm Clinical applications: The Oculight SLx laser system can be used to perform retinal photocoagulation and glaucoma procedures. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also has some unique treatment options, such as: Nsdpfezd Uubox Alholc transscleral retinal photocoagulation for retinal tears and detachments, transscleral cyclophotocoagulation for refractive glaucoma, transpupillary thermotherapy photocoagulation for choroidal lesions, and MicroPulse photocoagulation below the threshold for diabetic retinopathy and age-related macular degeneration (AMD). Laser-indirect ophthalmoscope (LIO) The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients who are best examined and treated in the supine position. It is considered to have a unique optical design in the industry, which eliminates the need to adjust the laser focus and allows for a wide range of working distances. Type: Iridex OcuLight SLx Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer an LDS shaker with power amplifier and control unit. Shaker technical data: Shaker type V 875 Peak force SINUS 35.6 kN Peak force NOISE 35.6 kN (rms) Peak force SHOCK 106.7 kN Max. acceleration SINUS 1078 m/s² Max. acceleration RANDOM 735.5 m/s² (rms) Max. velocity 1.8 m/s Frequency range excitation direction 0 to 3000 Hz Excitation types: horizontal, vertical, any angle Excitation types: Tests with sinusoidal excitation Tests with noise-shaped excitation Tests with sine and noise-shaped excitation Tests with shock-shaped excitation (SHOCK): Half-sine shock Sawtooth shock Trapezoidal shock Rectangular shock Simulation or reproduction of a real load profile (Long Time History LTH). A real dynamic time history is used for the test, which was obtained in the test environment. (FFT): Shaker Control Signal Analysis (RANDOM): Random (ROR): Random-on-Random (RSTD): Resonance Search, Track and Dwell (SINEOSC): Sine Oscillator (SOR): Sine-on-Random (SROR): Sine-and-Random-on-Random (SRS): Shock Response Spectrum Synthesis (LTH): Long Time History Data types in signal analysis Possible data types for displaying the TRANSFER FUNCTION [transmibility(f)] Mag dB Mag log Mag Real dB Real Imaginary dB Imaginary Phase UnwrapPhase Real+Imaginery Mag+Phase dB Mag+Phase log Mag+Phase V875 Vibrator 440 mm SPA40K 35.6 kN Dimensions: Approx. 54x90x191cm (amplifier), 115x155x95cm (shaker) Weight: Approx. 650kg (amplifier), 3 tons (shaker) Nedpfx Aezd Umdslhslc Type: SPA56/40K v3 V875 TC Condition: used Scope of supply: (See image) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Nodpfx Ajzd Ufaslholc Instrument configuration includes the following features: • Magnification range: 5x – 300,000x • Acceleration voltage: 0.3 – 30 kV • Tungsten filament cathode (LaB6 cathode optional) • Large fully motorized sample stage with eccentric tilt capability, including: – Graphic navigation on the sample holder – Easy sample navigation via click-center-zoom – Field-of-view controlled navigation via two navigators – Relative coordinate navigation – Save and recall of sample positions – Adjustable stage field-of-view selection • Field-of-view correction during rotation via computer-driven eccentric rotation • Field-of-view correction during tilting via computer-driven eccentric tilting • Calculation of the possible tilt angle based on sample geometry • Automatic focus tracking when moving the sample in the Z-axis • Intelligent limit switches for all motorized axes • Stage travel: X = 125 mm Y = 100 mm Z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) • Secondary electron detector for high vacuum operation • Newly designed, super-conical objective lens for optimal resolution at high tilt angles • Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV • Simultaneous live imaging with multiple detectors • Powerful image measurement functions • Movie function for recording dynamic processes • Versatile specimen chamber with numerous expansion options: free ports for EDX, WDX, EBSD, cathodoluminescence, etc. • Low-maintenance, quiet pump system consisting of a fore vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control • Comprehensive safety procedures against misuse and external media failure • Ergonomic, height-adjustable system table • SEM starter kit including 2 sample holders, tool kit, and 6 replacement filaments Additional equipment for SEM: • Turbomolecular pump (instead of standard diffusion pump) – Use of a turbomolecular pump eliminates the need for cooling water during SEM operation. Further SEM equipment: • PC for SEM control including TFT monitor • ΟΧ200 Bruker Quantax 200 Extended EDX System – Bruker EDX software will be transferred to new owner upon purchase • Nitrogen-free, energy-dispersive X-ray analysis system including: – SDD detector with 127 eV energy resolution or better – Detection for all elements from boron upwards – Vibration-free, maintenance-free. Peltier cooled (no nitrogen required) – Pulse processor – TFT monitor – Spectrum measurement and element identification – Fully automatic, quantitative, standardless elemental analysis – Image acquisition – Ultra-fast qualitative line scan – Ultra-fast qualitative element mapping – Data management and archiving system – Report generation and results output – Data communication – Installation and user training – HyperMap – Multipoint analysis – Bruker xFlash detector (SDD) with signal processing unit SVE III Scope of delivery: (see photos) Condition: used (Subject to changes and errors in the technical data and specifications!)

Year of construction: 2016, condition: excellent (used), Horiba Nsdpfxszdy Rne Alhelc Here we offer you a Horiba exhaust gas system, model Mexa 7100D. Including JAG-10-000-061 cylinder trolley, approx. 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust aftertreatment, evaluation of exhaust aftertreatment systems, modal analysis (dynamic or transient analysis) during non-stationary operating conditions. Analyzer for CO/CO2 (HC, NO, N2O, SO2), O2, THC 200 operating hours Weight: 620 kg Year of manufacture: 2016 Type: Mexa 7100D Condition: used Collection from our location Scope of supply: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Stäubli Measuring Robot Here we offer a well-maintained Stäubli measuring robot. Measuring robotics for measuring, analyzing, and evaluating quality characteristics. RobFlow (measuring robotics software) Full version and dongle on integrated Siemens industrial PC 6AG4114-1NC22-4EX0 Laser distance sensor Model ILR 1181-30 Technical data: Measuring range 0.1 … 50 m on natural, diffusely reflecting surfaces, Nedszdyt Aepfx Alholc 50 m up to a maximum of 150 m on reflector plate Linearity ±2 mm (+15°C … +30°C), ±5 mm (-10°C … +50°C) Resolution 0.1 mm Repeatability ≤ 0.5 mm Response time 100 ms ... 6 s (ILR 1181-30) 20 ms ... 6 s (ILR 1182-30) Laser according to IEC 825-1 / EN 60825 Red 650 nm, laser protection class 2, power ≤ 1 mW Beam diameter < 11 mm at 10 m distance Beam diameter < 35 mm at 50 m distance Beam diameter < 65 mm at 100 m distance Laser divergence 0.6 mrad Operating temperature -10°C … +50°C Storage temperature -20°C … +70°C Applications: RobFlow is a modular system. The scope of functions of the standard package can be supplemented with additional plugins for specific tasks as well as customer-specific extensions. With the help of the available functions, the following applications can be implemented, for example: Infotainment testing: Optical and haptic tests Individual actuations and path movements straight, meandering, curve segments Analysis and evaluation functions Steering column tests: Haptic tests along complex paths Large measuring range thanks to multi-calibrated force/torque sensor Easy to program thanks to RobFlow Air vent end-of-line tests: Haptic and optical tests Interchangeable test adapters for a wide range of devices Automatic testing, evaluation and marking including integrated leak test Vehicle seat tests: Functional and haptic tests Headrest distance measurements Comfort and stiffness evaluations Service life and fatigue tests The advantages of RobFlow at a glance: User-friendly operation No programming language knowledge required Variable and dynamic test sequences Branched process control Easy exchange of test programs between development and production Extensive analysis and evaluation functions Graphical display of measurement data and report generation Flexible and extensible through plug-in architecture Stäubli robot RX160 with 379 operating hours Controller CS8C RX160 Lifting capacity (nominal load - kg) 20 kg and handheld device SP1 Total weight 500 kg Type: Stäubli Robot RX160 with controller CS8C, handheld device, software, PC Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: used, Used focus parameter monitor for monitoring and analyzing laser processes in industrial production facilities. The system is used for process monitoring and quality control of laser optics and laser machining processes. Manufacturer: PRIMES Device type: Focus Parameter Monitor Model: FPM Condition: used Year of manufacture: 2018 Serial number: 16358 Communication interface: PROFINET 2 x Ethernet port COM interface DCP interface Service access available Status display: Link Tx/Rx MAC address: 00:03:F4:0B:04:B0 IP address: 192.168.116.119 Robust industrial housing made of aluminum Integrated carrying handle For laser process monitoring and focus analysis Nljdpfezdni Eox Alhec Location: Kusel Quantity: 2 units available

Condition: good (used), Year of construction: 2017, functionality: fully functional, Dosing unit MOTAN Gravicolor 30 with GRAVInet Stock no.: 503694 Machine type/ Nljdpfjzdi Ngsx Alhsc Device type: Dosing unit Manufacturer: MOTAN Type: Gravicolor 30 with GRAVInet Year of manufacture: 2017 GRAVICOLOR precisely mixes and doses up to six materials with the highest recipe accuracy. These modular, gravimetric dosing and mixing units are specifically designed for injection molding, blow molding, and extrusion applications with throughput rates of up to 2200 kg/h. Regardless of recipes, materials, or the application environment, IntelliBlend continuously analyzes all process data and achieves the best possible operating point at all times through self-optimization. The highest level of recipe adherence results in the best and most consistent product quality.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 226735, type of input current: AC, input voltage: 230 V, Equipment: type plate available, Qualification, commissioning and troubleshooting – intuitive, flexible, fast High data transfer rates of up to 10 Gbit/s Ethernet and new Power-over-Ethernet applications up to 90 W present entirely new challenges for structured cabling. The NetXpert XG2 offers comprehensive active and passive network testing up to 10 Gbit/s for the qualification, commissioning, and troubleshooting of copper and fiber optic cabling. Featuring the largest touch display in its device class, the NetXpert XG2 guarantees user-friendly operation and a clear presentation of results. At the same time, the NetXpert XG2 ensures maximum reliability of results thanks to the unique combination of up to four different testing methods for analyzing a data link. Flexible, scalable model range – upgradable from 1 to 10 Gbit/s The NetXpert XG2 and XG2-PLUS qualify twisted pair cabling from 1 to 10 Gbit/s. With their unique combination of four measurement methods, these devices verify whether your cabling can support interference-free Ethernet transmission up to 10 Gbit/s. The NetXpert XG2 is available in its base version from 1 Gbit/s and can be upgraded to 10 Gbit/s. The NetXpert XG2-PLUS comes fully equipped to also qualify fiber optic cabling up to 10 Gbit/s. SPECIFICATIONS – ALL VERSIONS Copper Interface 1 x Cat 6A RJ45, replaceable Fiber Interface 2 x SFP slot, 1 - 10 Gbit/s; (SFP modules to be ordered separately!) Length measurement technology TDR (Time Domain Reflectometry) and capacitive Cabling test and ID Up to 305 m Split-pair detection: 1 m to 305 m Length measurement: 0 to 457 m, ± (5%+30 cm) Distance to fault (short circuit): 0 to 200 m ± (5% + 1 m) Compatible with 8 pass-through test and up to 24 ID remote units (RJ45) (ID remote units only) Power over Ethernet (PoE) Tests according to IEEE 802.3af PoE (Type 1, max 15.4 W), IEEE 802.3at PoE+ (Type 2, 30 W) and 802.3bt PoE++ (Type 4, 90 W) Max. voltage Maximum voltage that can be applied to any two test inputs without damaging the tester: RJ-45: 60 VDC or 50 VAC Nledpfxsygwayo Alhoc Memory capacity Stores an unlimited number of cable or network tests per project with custom names Tone generator Tone frequencies: 730 Hz and 11.440 Hz Languages English, German, French, Spanish, Italian Battery Li-Ion, 7.2 VDC, 6.2 Ah / up to 4 hours (typical) External power supply 12VDC Permissible temperatures Operation: -10° to 60 °C Storage: -30° to 70 °C Permissible humidity 10% to 90%, non-condensing Housing Plastic injection-molded Display 7" TFT-LCD color display with capacitive touchscreen, 1024 x 600 resolution (WSVGA) Dimensions 245 x 177 x 73 mm (main unit) 130 x 177 x 55 mm (active remote) Weight with batteries 1.2 kg (main unit) 0.6 kg (active remote)

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Complete analysis using the stationary spark spectrometer SpectroMaxX: With the aid of the spark spectrometer, the alloy content and trace elements of macroscopic solid samples can be determined with high accuracy down to the ppm range. Description of the system: Open spark stand for high sample throughput A wide variety of sample geometries are possible The following elements are available as a basis: Magnesium The analyzable elements and concentration levels depend on the methods available for the respective base element. Usable wavelength range: 170-670 nm Output of measurement values in concentrations or intensities Selectable output units (%, ppm) Output of statistical parameters (mean, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized for customer requirements Expansion with additional modules possible on-site Spark stand: Open spark stand for high sample throughput and various sample geometries Minimized argon consumption through argon-saving module Optimized argon flow Reduced cleaning intervals Spark stand plate easily replaceable Temperature-absorbing design without water cooling Integrated shutter system for optimal plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation, and digital offline pulse control 32 MHz microcontroller Max. spark duration: 4000 µs Max. spark power 4 kW Display system: Dedicated microcontroller for each CCD Serial interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic checking and identification of alloy/grade Result manager Online maintenance scheduler Environmental conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity: 80%, non-condensing Atmosphere: free of corrosive fumes and high dust levels Spectrometer: 90-253 V 50/60Hz Data max. 400 VA during sparking Fuse: 16 A slow-blow Version: Tabletop Depth: 750 mm Width: 625 mm Height: 450 mm Weight: 77 kg Condition: used Scope of supply: (See picture) Njdpfx Asu S Ahqjlholc (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, functionality: unexamined, machine/vehicle number: SX-50, Used Cameca SX-50 Electron Microprobe Cameca SX-50 electron microprobe is used (Electron Probe MicroAlalyses). it has a 6” inch stage, 3 WDX Spectrometers with several Cristals LiF, PET, TAP, ODPb, PC1, PC2, PC3. Nsdpfxjwnb D Te Alhslc Electron probe microanalysis (EPMA) are generally considered micro-analytical techniques which are able to image or analyze materials we can not generally observe with the resolution offered by visible techniques System is complete with all Books, service Manuals, Software and computer. Also many parts. 1 x Leybold Trivac D16B Vacuum Pump 1 x Alcatel 2012 A Vacuum Pump 2 x integrated Turbo Pumps

Condition: good (used), Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS Nodpfx Alewbd Twohjlc -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm -Weight: 7.9 kg

Condition: good (used), Year of construction: 1995, FINIX 500 is a finishing system flexo photopolymer plates up to 500 x 800 mm (about 19 "x 31"). This finishing unit has the exposure section with ultraviolet lamps and sliding tray is entirely made of stainless steel, which is produced after posteksponirovanie normal processing, including preliminary exposure, exposure, washing and drying, are usually performed FLEXO apparatus 3 or 5. When the normal process is completed, fleksoplastina usually dry to the touch, but sticky and you must give it rigidity posteksponirovaniem. FINIX 500 eliminates the tackiness while giving the plate rigidity and making it durable and resistant to abrasion and mechanical stress by exposing respective light sources. Exposure is carried out two types of lamps emitting ultraviolet radiation with different spectrum, each of which produces a certain effect on the wafer. Special germicidal lamps eliminate tackiness, and UV lamps complete posteksponirovanie plate, making it harder. The exposure time for each type of lamp can be set independently of each other, enabling the simultaneous or separate exhibition with different duration. Each type of light is controlled by its own control panel with digital display. FINIX also presented a model 120 plates measuring 35 "x 47" (900 x 1200 mm). Nodpfocwi Tfsx Alholc UV lamps bactericidal lamps FX 14x30 w 2x20 lamp cooling system posteksponirovaniya timer digitale Timer finisher digitale exhaust system Power 380V, 3 phase, 50 Hz dimensions 108 x 92 x 42 (H) cm net weight 130kg

Condition: used, Year of construction: 2008, Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2008 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request. Technical data Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) Formats: 20 cl returnable glass bottles (Coca-Cola, multiproduct, Sprite formats) Application: Empty bottle inspection (returnable glass bottles) Configuration: Single-lane installation between bottle washer and filler Inspection technology: HEUFT reflexx inspection system Inspection systems: Base inspection (foreign body detection) Finish inspection (mouth / finish defects) Double sidewall inspection with 90° rotation Residual liquid detection (Dual High Frequency + Infrared) Detection & rejection: Detection of fallen, tilted, higher or lower bottles DELTA reject system Vision system: CCD matrix cameras 32-bit image processors Stroboscopic lighting with microprocessor control Control system: HEUFT SPECTRUM multiprocessor control Operator interface: HEUFT PILOT LCD terminal with membrane keyboard and LED counter display Construction: Stainless steel and synthetic material housing Additional features: Encoder for conveyor speed monitoring Automatic air-blow cleaning system Pre-programmed bottle formats with additional programs Nljdsy Ucy Nopfx Alhec

Condition: used, Year of construction: 2007, Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2007 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request.  Technical data Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) Formats: 20 cl returnable glass bottles Application: Empty bottle inspection (returnable glass bottles) Configuration: Single-lane installation between bottle washer and filler Inspection technology: HEUFT reflexx inspection system Inspection systems: Base inspection (foreign body detection) Finish inspection (mouth / finish defects) Double sidewall inspection with 90° rotation Residual liquid detection (Dual High Frequency + Infrared) Detection & rejection: Detection of fallen, tilted, higher or lower bottles DELTA reject system Vision system: CCD matrix cameras 32-bit image processors Stroboscopic lighting with microprocessor control Control system: HEUFT SPECTRUM multiprocessor control Operator interface: HEUFT PILOT LCD terminal with membrane keyboard and LED counter display Construction: Stainless steel and synthetic material housing Additional features: Encoder for conveyor speed monitoring Automatic air-blow cleaning system Pre-programmed bottle formats with additional programs Nodpfx Alsy Ucyvjholc

Condition: used, mileage: 10,36,404 km, power: 345 kW (469.07 HP), first registration: 02/2012, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, total width: 2,600 mm, total height: 3,850 mm, loading space length: 7,400 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to availability and pending finalization, errors and omissions excepted: Volvo FH 480 refrigerator truck with partition, 2 evaporators + refrigerated trailer Volvo FH 480 refrigerator truck (Vehicle 480) First registration: 16.02.2012 1,036,404 km Engine: 12,777 ccm 345 kW / 480 hp Euro 5 EEV Overall length: 10,050 mm, overall width: 2,600 mm, overall height: 3,850 mm Internal length: 7,400 mm, internal width: 2,460 mm, internal height: 2,400 mm Front section approx. 900 mm long x 2,460 mm wide x 1,580 mm high (unit located above) Refrigeration unit: Thermo King T 1000 R Spectrum Diesel/Electric with refrigeration unit, FRC 11/2021 Body: Polaris with 1/2 + 1/2 portal doors, loading platform BÄR Type BC2000S4 2 pairs of lashing rails in the inner side walls Partition 2 evaporators Side door with pull-out ladder, passenger side front 4 x roof spotlights + 2 x rotating beacon on chrome ring Sun visor LED daytime running lights Double additional headlights Full air suspension Tire front: 385/55R22.5 approx. 50/50%, tire center: 315/70R22.5 FS approx. 40/40%, rear axle approx. 30/30%, tire rear: 385/55R22.5 approx. 40/50% 3rd axle liftable + steerable 1 pair of LED work lights behind the cabin below + 2 x LED reversing lights + 1 x rotating beacon driver's side rear 2 x stainless steel cabinets, driver's side, large tank passenger side Wheel chocks Sleeper cab with bed Central locking 2 x electric windows, mirrors, mirror heating, electric sunroof Multi-function steering wheel VEB (Electronic Braking System) Cruise control Swedish braking system Radio/CD Hands-free phone system Heated driver's seat Refrigerator Built-in cabinets in the rear, top Flat-screen TV Nledpfxozctpce Alhoc and Krone refrigerated trailer (Vehicle 96) First registration: 06.04.2006 Permissible total weight 18,000 kg Overall length: 8,600 mm, overall width: 2,600 mm, overall height: 3,700 mm Internal length: 7,100 mm, internal width: 2,460 mm, internal height: 2,290 mm 2 pairs of lashing rails in the floor Refrigeration unit: Thermo King MD 200/50s Diesel/Electric Body: Polaris, insulated Continuous portal doors at the rear Pull-out ladder at the rear Tires: 385/65R22.5 1.) approx. 20/10%, 2.) approx. 20/20% BPW drum brakes 2 x LED reversing lights Wheel chocks 2 x air suspension with lifting and lowering function Vehicles are still labeled Package price: €27,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the local court of Ludwigslust for disputes up to a value of €10,000, and the regional court of Schwerin for disputes exceeding this value. Errors and omissions excepted, subject to prior sale.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23352279, type of input current: three-phase, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 460 kg, power: 5.5 kW (7.48 HP), compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, SICK MCS 100FT/F CEMS System (2023) - Unused / Zero Hours - QAL1 Certified Available for immediate sale: A complete, unused (zero hours) Continuous Emission Monitoring System (CEMS) SICK MCS 100FT/F, manufactured in October 2023. This is a turn-key solution featuring advanced multi-component analysis technology. Key Technical Specifications: - FTIR Technology: Simultaneous measurement of SO2, NO, NO2, CO, CO2, HCl, HF, and H2O - FID (TOC) Analyzer: Integrated total organic carbon measurement - Zirconia Sensor: Integrated O2 measurement - Certification: Fully QAL1 certified (EN 15267 compliant) - Acid Mist Protection: Includes special cabinet with Acid Mist Absorber Box (ideal for H2SO4 protection during petcoke combustion) Complete Package Includes: - SICK MCS 100FT/F Analyzer Cabinet - Sampling Probe - 20m Heated Sampling Line - MEAC/DAU Data Acquisition System Condition: Brand New / Unused Availability: Immediate (Ex-stock) Nledpfx Aloy A Nu Ajhsc Ideal for cement and lime plants, refineries, and power generation facilities looking for a high-end upgrade without the manufacturer's lead time. FAT reports and technical manuals are available upon request.

Condition: used, mileage: 3,19,000 km, power: 162 kW (220.26 HP), first registration: 09/2017, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, color: white, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,500 mm, loading space length: 6,800 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Equipment: ABS, soot filter, tail-lift, Iveco Eurocargo 120 EL 220L Thermo King T-1000R----* Refrigeration unit: Thermo King - T-1000R Spectrum * Multi-temperature (longitudinal partition) * In-transit cooling (diesel operation / diesel unit) * Standby cooling - power connection (electric operation - power socket) * Kiesling refrigerated box body * Bär tail lift * 2 side doors on the right ----* One owner * Service book, full service history * General inspection (TÜV) & SP valid until 08/2026 ----* Reversing camera * Rear air suspension * Electric windows * Electrically adjustable exterior mirrors * Heated exterior mirrors * Central locking with remote control * ABS * Euro 6 C engine Nljdpey A Uzusfx Alhec * Automatic transmission * Radio with CD player * Bluetooth hands-free system ----* Truck registration (N2) * Permissible total weight: 11,990 kg * Payload: 4,180 kg * 2 vehicle keys available * VAT deductible ----* We speak German / English / Greek * Financing available upon request * We assist with all registration procedures (customs/export/temporary plates) and customs formalities * We are happy to make you an offer for your vehicle * Website: * Email: ----Price changes, prior sale, typographical errors and mistakes reserved

Condition: used, mileage: 4,50,121 km, power: 213 kW (289.60 HP), first registration: 05/2010, fuel type: diesel, empty load weight: 8,860 kg, maximum load weight: 6,140 kg, overall weight: 15,000 kg, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,150 mm, brakes: constant throttle, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 2,600 mm, total width: 3,670 mm, loading space length: 7,450 mm, loading space width: 2,470 mm, loading space height: 2,380 mm, Equipment: ABS, air conditioning, cabin, central locking, differential lock, fog lights, low noise, parking heater, seat heater, Vehicle location: Bovenden, registration house, 2x air seat, heated seats, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, radio-CD, auxiliary heating, ABS (anti-lock braking system), constant throttle, automatic transmission, differential lock, fog lights, driving lights, leaf-air suspension, low-noise G1, portal doors, side aluminum driving protection, side door right, roof hatch, central locking, cooling unit diesel/electric, Green environmental sticker Wheelbase: 5150 mm Body: freezer box with partition wall & Thermoking TS500 Spectrum refrigeration unit Diesel hours: 4797, electric hours: 49, ZF 12AS TipMatic gearbox, lashing strip, refrigeration curtain, partition wall! Tail lift available at an extra charge! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nsdpfovhhmpex Alhelc - .

Condition: used, mileage: 1,69,478 km, power: 172 kW (233.85 HP), first registration: 03/2021, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 2,290 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, DAF LF 230 Schmitz refrigerated box body, 2 compartments * Schmitz refrigerated box body * BÄR underfold tail lift, 1,500 kg lifting capacity * Air conditioning * Rear view camera * Thermo King T-800 R Spectrum * 2 compartments * Loading space length: 7.2 m * Loading space height: 2.29 m * Loading space width: 2.5 m * German truck Njdpfx Aleyzk Smehelc * 1 previous owner * Schmitz refrigerated box body * Left cooling compartment dimensions: 83 cm width * Right cooling compartment: 83 cm width, 4.6 m length, lockable by fold-down door * Thermo King operating hours: Diesel: 4,382 h, Electric: 47 h * Webasto heater * Air conditioning * Differential lock * Cruise control * Tyres: front 245/70 R 17.5, 6/7 mm tread * Rear: 245/70 R 17.5, 8/8/9/9 mm tread * Main inspection / safety inspection renewed before sale * All information without guarantee * Further details and additional services upon request * Repainting, retrofitting possible * Short-term license plates / export plates * Transfer and shipping possible * Assistance with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing available. We have worked with various leasing companies for many years and can therefore offer optimal financing solutions for each customer. We can often help clients with less-than-perfect credit and connect them with suitable leasing partners. * Own workshop * We speak Polish, English, and Russian. * The repainting in your desired color is possible in-house at a reasonable price and with high quality. * Are you located further away and unable to visit us to inspect and check the truck? No problem. You are welcome to appoint an independent expert of your choice to carry out a technical and visual inspection of the truck. Should an issue arise contrary to expectations, we can resolve it quickly and effectively in our workshop. Furthermore, for an additional fee, we can deliver your newly purchased used vehicle Europe-wide.

Year of construction: 2013, condition: excellent (used), Scheugenpflug DOS P016 Piston Dispenser DOS P Piston Dispensing System For a wide range of requirements Scheugenpflug piston dispensing systems operate on the principle of volumetric dispensing; the quantity of material dispensed is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material via a connected material supply system. When a two-component medium is used, the ratio of resin to hardener is simultaneously determined by the volumes of the two cylinders. The dispensing pistons simultaneously force both components through separate channels toward the outlet valve, where they only mix within the static mixing tube to form a homogeneous, reactive medium. The DOS P016 / 050 / 100 / 300 / TCA piston dispensing systems are high-precision volumetric units designed to process both single-component (1K) and two-component (2K) materials, covering a wide spectrum of application requirements. Precisely dimensioned dispensing cylinders ensure the delivery of reproducible material volumes. For 2K materials, the parallel emptying of both cylinders into the shared mixing tube ensures a consistently stable mixing ratio at all times, thereby guaranteeing maximum process reliability. At the same time, this method allows for the gentle handling of potting media that are sensitive to pressure, moisture, or shear forces, without the risk of material degradation. Users also benefit from quick and easy maintenance, long service lives, and significantly reduced upkeep costs. Optional features—such as valve monitoring, mixing tube heating, or dispensing head heating—allow these systems to be flexibly adapted to specific application requirements. Your benefits Dosing accuracy independent of temperature, pressure, or viscosity Constant mixing ratio at all times due to parallel emptying of dosing cylinders Wide range of applications (in terms of materials and use cases) Key functions Simultaneous cylinder discharge via a shared stroke mechanism ensures a homogeneous mixing ratio Sensor-based monitoring of inlet and outlet valves as well as cylinder filling Material temperature control via mixing tube heating (optional) Camera-based dispensing needle monitoring (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to high-viscosity Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure, and casting resin viscosity Precisely reproducible and highly accurate results Maximum process reliability Applications Potting, sealing, bonding, application of thermal interface materials, sealing, encapsulation (Glob Top) DOS P016 Max. volume/shot (2K at 1:1 ratio) 1K: 0.06/17 ml 2K: 0.1/32 ml Max. dispensing speed [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatability [°C]: up to 80 Outlets: 1K: 1–4, 6, 8 2K: 1–4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on operation "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Njdpfezc Nplox Alhslc You can find additional dosing units—new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Brüel & Kjær LDS Dactron LAS 200 Shaker Control System / Vibration Testing Controller Used LDS Dactron LASER USB Shaker Control System for electrodynamic vibration testing systems and vibration test rigs. The system is suitable for random, sine, resonance, shock, and long-term tests in laboratories, development departments, and testing centers. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjær Type: LASER USB Model: LAS 200 Made in U.S.A. Installed Software Shaker Control Version 8.1001 Library Version 6.3120 Activated Modules Nedpfx Asy T Iv Helhslc Random Sine on Random Random on Random Swept Sine Resonance Search, Track and Dwell Sine Oscillator Classical Shock Shock Response Spectrum Long Time History Additional Options Automatic Drive Notching / Limiting Real Time Data Exchange High Frequency Control Amplifier Controller Technical Data 8 active input channels 2 output channels Sampling Rate: 96 kHz A/D Resolution: 24 Bit USB 2.0 interface Input Types: Volt / ICP / TEDS Calibration Last calibration according to system display: 20.09.2023 Displayed due date: 19.09.2024 Dimensions Controller approx. 430 x 350 x 90 mm (W x D x H) Weight approx. 6 - 8 kg Scope of Delivery LDS Dactron LASER USB Controller Acer laptop with installed software Connection cables and accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Normal storage and usage marks present. Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data and specifications. Prior sale reserved.

Condition: used, mileage: 6,98,811 km, power: 315 kW (428.28 HP), first registration: 11/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 49 m³, loading space length: 7,900 mm, loading space width: 2,480 mm, loading space height: 2,520 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * ANTOS 2543 L REFRIGERATED MEAT BOX BODY with 3 rail systems + 2 t tail lift * THERMOKING T-1200 Spectrum (diesel engine) and standby cooling, 380 V ELECTRIC * WILKE refrigerated box, dual-chamber system (first chamber 1.58 m + second chamber 0.87 m wide) * Vehicle number for customer inquiries: 4047 * Engine specification Euro VI, version 2 * Active Brake Assist * Rear axle differential lock * Air conditioning * Rear air suspension * Lane Keeping Assistant * Environmental badge (green) * Tail lift * Standard trailer coupling, D40, Ringfeder * High performance engine brake * Axle configuration 6x2 * Full service history * Stability Control Assistant (ESP) * 500 l tank, left, 650 x 565 x 1600 mm, aluminium * Front axle air suspension * Additional hot water heater, cab * Two-line trailer brake, brake connections left * Antos * Air horn * Electronic brake system with ABS and ASR * Comfort driver's air-suspended seat * G 211-12/14.93-1.0 transmission * Central locking with comfort function * Mercedes PowerShift 3 * Tag axle, 7.5 t, unloadable, liftable * Particulate filter * External sun visor, transparent * Digital tachograph, EU, rpm * Cruise control * Two-seater * 60 l AdBlue tank, left * Starting aid, speed limiter 30 km/h * 24 V, 15-pin trailer socket * Roof hatch/roof ventilation flap * Heating, electronic air supply unit * M cab * M-Cab ClassicSpace, 2.30 m, 320 mm tunnel * Engine OM470, inline 6, 10.7 l, 315 kW (428 hp), 2100 Nm * Wheelbase 4,900 mm * Tubeless tyres, 315/70 R 22.5 rear axle * Tubeless tyres, 315/70 R 22.5 front/leading/lifting axle * Sunblind, driver's side * Pre-equipment for toll collection * Additional stabilizer, rear/tag axle * Attention/alertness assistant * Fan, crankshaft driven * Smoker's package * Heavy vehicles from 18 t, on-road * Scope EAPU, 1st position * Pre-equipment for tail lift control * Extended battery cables * 2/3 door No liability for typographical or misprints. Njdpfx Aeumfrpelholc Sale to trade customers only. Errors and prior sale reserved. Modifications, interim sales and errors explicitly reserved. The description serves for vehicle identification only and does not constitute a guarantee in the sense of commercial law. The contract description is binding. * TOP SERVICE & QUALITY * We are happy to provide you with a LEASING-FINANCING-HIRE PURCHASE offer * Warranty insurance available on request from the insurer * TÜV / UVV tail lift inspection / tachograph check and installation of OBU device by our local partners * Export plates for 30 days * All export documents can be provided upon request * Toll-Collect can be booked in-house * Free transfer from Stuttgart airport or Metzingen railway station (Württ) * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit our website at * Over 200 vehicles always in stock

Condition: used, mileage: 3,40,300 km, power: 265 kW (360.30 HP), first registration: 03/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space volume: 52 m³, loading space length: 9,150 mm, loading space width: 2,490 mm, loading space height: 2,290 mm, Equipment: air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, Tail lift Bär 2,000 kg, 2,100 mm, control unit left and right * Refrigeration unit Thermo King T-1000R Spectrum with 2 evaporators, diesel + 380 V, temperature recorder * Steerable lift axle. ---- Deep-freeze box body by Lamberet with pneumatic roller shutter door, tail lift, partition wall (slidable and foldable), and 2 right-side loading doors (2,120 mm high, 1,000 mm wide) with access ladder. ----* Axle load display, front and rear * Movable partition wall in the cargo area * Body with rear roller door * Double glazing driver and passenger side windows * Hill hold * Air-suspended front axle * Rear axle differential lock * Air-suspended rear axle * 2-line trailer brake (EC) * Retarder * Scania emergency braking assistant (AEB) * Electronic Stability Program (ESP) * Disc brakes * Adaptive cruise control (ACC) * Navigation system * Scania lane departure warning system (LDW) * Roof hatch in cab * Transparent external sun visor * Electrically adjustable and heated exterior mirrors * Electric windows for driver and passenger doors * Central locking with remote control * Immobiliser (transponder) * Automatic transmission * Scania Opticruise gearbox without clutch pedal * Automatic climate control * Auxiliary air heater * Reversing camera * 500-liter tank * Fog lights * Headlamp cleaning system * Euro 6 engine version * Fuel pre-heating * Exhaust brake * Video turning assistant system (VAS) with display * Engine version with AdBlue * Aluminum cargo area floor * Jaw trailer coupling * Driver’s seat air-suspended, heated and ventilated * Load securing rails * Steerable and liftable trailing axle * Central lubrication system Nedpfxjyxt Hhe Alhslc * EBS ---- Sale only to commercial customers! No guarantee for the information provided! Subject to prior sale! Only our general terms and conditions apply! We would be happy to provide you with a leasing or financing offer.

Condition: used, mileage: 6,25,811 km, power: 151 kW (205.30 HP), first registration: 11/2006, fuel type: diesel, overall weight: 11,990 kg, next inspection (TÜV): 04/2026, color: blue, gearing type: automatic, emission class: euro4, loading space volume: 33 m³, loading space length: 6,000 mm, loading space width: 2,450 mm, loading space height: 2,250 mm, Year of construction: 2006, Equipment: ABS, tail-lift, * MAN TGL 12.210 BL refrigerated box truck, 6 m, with MBB 1.5-ton loading platform. * THERMOKING T-1200 SPECTRUM (diesel engine) and auxiliary cooling 380 V ELECTRIC * EBS / ABS fault present + no TÜV (technical inspection) !! * SPECIAL SALE PRICE !!! * Vehicle number for customer inquiries: 4621 * Automatic transmission * Environmental badge (green) * Air suspension * Loading platform * EBS * Engine type EURO 4 * Electric windows * Anti-lock braking system (ABS) * Two-seater * Power steering * Steel rims * Well-maintained with service booklet * Traction control Nljdpfx Aleylq I Ushsc * 2/3-door No liability for printing and typographical errors Sales only to commercial businesses Errors and prior sales excepted* Changes, prior sales and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase agreement shall be binding. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING/FINANCING/RENT-TO-OWN offer Guarantee insurance possible upon request from the insurer * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners * Customs license plates for 30 days All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Constantly over 200 vehicles in stock