Used Spectrum Analyzer for sale (200)

Condition: refurbished (used), Year of construction: 2020, operating hours: 455 h, functionality: fully functional, machine/vehicle number: 1222275, warranty duration: 6 months, total height: 2,085 mm, total width: 1,225 mm, total length: 6,109 mm, type of input current: three-phase, overall weight: 1,570 kg, film width: 700 mm, compressed air connection: 6 bar, input voltage: 400 V, working height: 870 mm, year of last overhaul: 2026, input current: 14 A, Equipment: documentation/manual, safety light barrier, The ULMA FM 300 automatic flow pack machine was specifically designed to package fresh products in multilayer films under a modified atmosphere (MAP). This machine produces hermetically sealed “pillow-pack” flow packs in a pillow format. ULMA FM 30 The ULMA FM 300 automatic flow pack machine was specifically designed to package fresh products in multilayer films under a modified atmosphere (MAP). This machine produces hermetically sealed “pillow-pack” flow packs in a pillow format. Technical specifications Model: FM 300 Condition: Overhauled 2026 (fully functional) Year of manufacture: 2020 Performance: Up to 80 packs/minute (depending on film and product characteristics) with MAP. Packaging type: Flow pack Machine equipment Infeed conveyor length: Free infeed section 2135 mm Equipment features ✅ Wash-down infeed conveyor in hygienic design ✅ Motorized film roll holder (max. film width 700 mm) Godpjzkry Uofx Acteiw ✅ Photo cell for printed film ❌ Label dispenser ❌ Printer ✅ Signal for printer/labeler ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700 mm) ✅ Cross-sealing bar made of stainless steel with double tooth for mono films ✅ Squeeze sponge for controlling the pack volume ✅ No product/no bag function ✅ Synchronization signals for upstream and downstream equipment ✅ Gas analysis device Dan Sensor MAP Check 3 O2 & CO2 gas analyzer Documentation & Operation Language (documentation & HMI): German (other languages available upon request) Dimensions & Weight External dimensions (L × W × H): 6,109 × 1,225 × 2,085 mm Shipping weight: 1570 kg (including transport packaging)

Condition: good (used), functionality: fully functional, The machine consists of: 1. Loading conveyor belt for the sheet to be joined - Dimensions: 3200 x 2000 - Power: 2 kW 2. Lifting table - Dimensions: 3200 x 2000 - Capacity: 5000 kg - Power: 4 kW 3. Conveyor belt for loading empty pallets - Dimensions: 3200 x 2000 - Power: 2 kW 4. Empty loader for the sheet to be optimized VTSA 3800 - Length: 3200 - Feeding speed: 55 m/min - Power: 5 kW 5. Roller feeder VTSM 3800 - Length: 3200 - Power: 1.5 kW 6. Angle transmission with rollers and belts KS4 - 5400 - Length: 3200 - Width: 2000 - Power: 2+2 kW 7. Conveyor belt for aligning sheets on the side edge PKP - Length: 3000 - Power: 4 kW 8. Conveyor belt with chains for pinching the sheet - Length: 2000 - Power: 5.5 kW 9. Camera for reading the material to be optimized OK P - Analyzes the sheet and sends the cutting commands (head cut, tail cut, hole cut, etc., according to the parameters set by the operator) - Sheet thickness control unit 10. Pasta cutting unit - Hydraulic control 11. Group for selecting waste material (it is inserted in a belt below) 12. Splicing group with thermo-fuse wire - Number of splicing wires: 6 13. Cutter for cutting the joined sheets to size - Hydraulic control 14. Stacker for unloading the joined sheets - Length: 3200 - Width: 2000 - Power: 3 kW 15. Lift table - Length: 3200 - Width: 2000 - Load: 5000 kg - Power: 4 kW 16. Conveyor belt for unloading pallets - Length: 3200 - Width: 2000 - Power: 2 kW 17. Conveyor belt for loading empty pallets - Length: 3200 Gjdjvnri Ispfx Acteiw - Width: 2000 - Power: 2 kW 18. Evacuation belt for cutting waste - Power: 4 kW 19. Mechanical cutter for shredding waste

Condition: used, Included: KEYENCE LJ-V7300 laser head - 3 units KEYENCE LJ-V7001P laser profiler - 2 units CA-CH5 cable (CA-CH5 – VISION SYSTEM CAMERA CABLE High-Speed Type, 5m – 85444290 – 0DH70207, 0DH70209, 0DH70211) for connecting to the LJ-V7000 series controller - 3 units. Individual units can be purchased. More information at tobesold.eu Professional KEYENCE LJ-V7300 laser profilers - 3 units, designed for non-contact 2D and 3D measurements with high accuracy. The device uses laser scanning technology for fast dimensional, profile, height, and geometry inspection of parts in industrial and laboratory applications. The LJ-V7300 model is used in automated quality control, measurement of production components, surface inspection, and advanced machine vision systems. Thanks to its high measurement speed and high resolution, it enables real-time measurements on production lines. LJ-V7300 – 2D/3D Laser Displacement Profiler 300+/- 145 mm – 90314990 – 88710030, 88710048, 88710056 Specifications Manufacturer: KEYENCE Model: LJ-V7300 Type: 2D/3D laser profiler Gedeziddcspfx Acteiw Measurement range: 300 ± 145 mm Measurement technology: non-contact laser measurement Application: height, profile, shape, and geometry measurements KEYENCE LJ-V7001P is a professional controller designed to work with LJ-V series laser profilers, used in advanced 2D and 3D measurement systems. The device is responsible for processing measurement data, analyzing profiles, and integrating the system with industrial automation and quality control stations. The controller was designed for fast analysis of data from laser sensors, enabling precise measurements of height, geometry, shape, and surface inspection in real time. Thanks to its industrial design, it is suitable for use in demanding production environments and research and development laboratories. Specifications Manufacturer: KEYENCE Model: LJ-V7001P Type: controller for 2D/3D laser profilers Version: PNP Series: LJ-V Part numbers: 90314990, 88710101, 88710116 Application: used with KEYENCE LJ-V laser sensors and profilers Applications industrial metrology, quality control, 2D and 3D measurements, industrial automation, machine vision systems, surface and geometry inspection, research and development laboratories. Key features fast, non-contact laser measurement, ability to create 2D profiles and 3D models, high measurement accuracy and repeatability, integration with automation and quality control systems, suitable for continuous operation in an industrial environment. The devices come from equipment used in research and development activities related to measurement systems, metrology, and industrial automation. Technical and visual condition as shown in the product photos.

Condition: excellent (used), Here, we offer you an Iridex laser system, the OcuLight SLx. Laser IRIDEX Oculight SLx Tri-Mode 810 nm Diode Laser Description: Designed for longevity, with a thermal management system to increase the efficiency and reliability of laser conversion. Improved user interface with conveniently arranged, easy-to-understand controls. Enables easy transport between rooms and offices. The tri-mode capability offers three different laser energy delivery modes: CW-Pulse, MicroPulse, and Long-Pulse. An extremely ergonomic user interface, infrared wavelength, and a wide range of delivery systems offer a broad spectrum of treatment options. Well-suited for retinopathy of prematurity and end-stage glaucoma. The CW-Pulse mode delivers energy in single or repeated exposures. The LongPulse mode delivers laser energy over longer periods. The MicroPulse mode delivers laser energy in a series of short pulses, allowing for fine control of the thermal effects. Features: Application area: ophthalmology Amplifier medium: solid-state Ergonomics: table-top unit Wavelength: 810 nm Treatment laser power: infrared diode laser 810 nm, 0–3000 mW Target laser power: red diode laser 650–670 nm, 0 to < 1.0 mW Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, Large-Spot-SLAs, LIO and OMAs Gisdezd Uubepfx Actew Exposure durations: CW-Pulse 10-9000 ms, MicroPulse 0.1-1.0 ms, LongPulse 10s-30 min No external air or water cooling required. Weight: 6.4 kg Length: 10 mm Width: 30 mm Height: 30 mm Clinical applications: The Oculight SLx laser system can be used to perform retinal photocoagulation and glaucoma procedures. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also has some unique treatment options, such as: transscleral retinal photocoagulation for retinal tears and detachments, transscleral cyclophotocoagulation for refractive glaucoma, transpupillary thermotherapy photocoagulation for choroidal lesions, and MicroPulse photocoagulation below the threshold for diabetic retinopathy and age-related macular degeneration (AMD). Laser-indirect ophthalmoscope (LIO) The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients who are best examined and treated in the supine position. It is considered to have a unique optical design in the industry, which eliminates the need to adjust the laser focus and allows for a wide range of working distances. Type: Iridex OcuLight SLx Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer an LDS shaker with power amplifier and control unit. Shaker technical data: Shaker type V 875 Peak force SINUS 35.6 kN Peak force NOISE 35.6 kN (rms) Peak force SHOCK 106.7 kN Max. acceleration SINUS 1078 m/s² Max. acceleration RANDOM 735.5 m/s² (rms) Max. velocity 1.8 m/s Frequency range excitation direction 0 to 3000 Hz Excitation types: horizontal, vertical, any angle Excitation types: Tests with sinusoidal excitation Tests with noise-shaped excitation Tests with sine and noise-shaped excitation Tests with shock-shaped excitation (SHOCK): Half-sine shock Sawtooth shock Trapezoidal shock Rectangular shock Simulation or reproduction of a real load profile (Long Time History LTH). A real dynamic time history is used for the test, which was obtained in the test environment. (FFT): Shaker Control Signal Analysis (RANDOM): Random (ROR): Random-on-Random (RSTD): Resonance Search, Track and Dwell (SINEOSC): Sine Oscillator (SOR): Sine-on-Random (SROR): Sine-and-Random-on-Random (SRS): Shock Response Spectrum Synthesis (LTH): Long Time History Data types in signal analysis Possible data types for displaying the TRANSFER FUNCTION [transmibility(f)] Mag dB Mag log Mag Real dB Real Imaginary dB Imaginary Phase UnwrapPhase Gjdpfx Acozd Umdeteiw Real+Imaginery Mag+Phase dB Mag+Phase log Mag+Phase V875 Vibrator 440 mm SPA40K 35.6 kN Dimensions: Approx. 54x90x191cm (amplifier), 115x155x95cm (shaker) Weight: Approx. 650kg (amplifier), 3 tons (shaker) Type: SPA56/40K v3 V875 TC Condition: used Scope of supply: (See image) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Instrument configuration includes the following features: • Magnification range: 5x – 300,000x • Acceleration voltage: 0.3 – 30 kV • Tungsten filament cathode (LaB6 cathode optional) • Large fully motorized sample stage with eccentric tilt capability, including: – Graphic navigation on the sample holder – Easy sample navigation via click-center-zoom – Field-of-view controlled navigation via two navigators – Relative coordinate navigation – Save and recall of sample positions – Adjustable stage field-of-view selection • Field-of-view correction during rotation via computer-driven eccentric rotation • Field-of-view correction during tilting via computer-driven eccentric tilting • Calculation of the possible tilt angle based on sample geometry • Automatic focus tracking when moving the sample in the Z-axis • Intelligent limit switches for all motorized axes • Stage travel: X = 125 mm Y = 100 mm Z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) • Secondary electron detector for high vacuum operation • Newly designed, super-conical objective lens for optimal resolution at high tilt angles • Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV • Simultaneous live imaging with multiple detectors • Powerful image measurement functions • Movie function for recording dynamic processes • Versatile specimen chamber with numerous expansion options: free ports for EDX, WDX, EBSD, cathodoluminescence, etc. • Low-maintenance, quiet pump system consisting of a fore vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control • Comprehensive safety procedures against misuse and external media failure • Ergonomic, height-adjustable system table • SEM starter kit including 2 sample holders, tool kit, and 6 replacement filaments Additional equipment for SEM: • Turbomolecular pump (instead of standard diffusion pump) Giodszd Ufajpfx Actsw – Use of a turbomolecular pump eliminates the need for cooling water during SEM operation. Further SEM equipment: • PC for SEM control including TFT monitor • ΟΧ200 Bruker Quantax 200 Extended EDX System – Bruker EDX software will be transferred to new owner upon purchase • Nitrogen-free, energy-dispersive X-ray analysis system including: – SDD detector with 127 eV energy resolution or better – Detection for all elements from boron upwards – Vibration-free, maintenance-free. Peltier cooled (no nitrogen required) – Pulse processor – TFT monitor – Spectrum measurement and element identification – Fully automatic, quantitative, standardless elemental analysis – Image acquisition – Ultra-fast qualitative line scan – Ultra-fast qualitative element mapping – Data management and archiving system – Report generation and results output – Data communication – Installation and user training – HyperMap – Multipoint analysis – Bruker xFlash detector (SDD) with signal processing unit SVE III Scope of delivery: (see photos) Condition: used (Subject to changes and errors in the technical data and specifications!)

Year of construction: 2016, condition: excellent (used), Horiba Here we offer you a Horiba exhaust gas system, model Mexa 7100D. Including JAG-10-000-061 cylinder trolley, approx. 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust aftertreatment, evaluation of exhaust aftertreatment systems, modal analysis (dynamic or transient analysis) during non-stationary operating conditions. Analyzer for CO/CO2 (HC, NO, N2O, SO2), O2, THC 200 operating hours Gisdpfx Aozdy Rnsctjw Weight: 620 kg Year of manufacture: 2016 Type: Mexa 7100D Condition: used Collection from our location Scope of supply: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Stäubli Measuring Robot Here we offer a well-maintained Stäubli measuring robot. Measuring robotics for measuring, analyzing, and evaluating quality characteristics. RobFlow (measuring robotics software) Full version and dongle on integrated Siemens industrial PC 6AG4114-1NC22-4EX0 Laser distance sensor Model ILR 1181-30 Technical data: Measuring range 0.1 … 50 m on natural, diffusely reflecting surfaces, 50 m up to a maximum of 150 m on reflector plate Linearity ±2 mm (+15°C … +30°C), ±5 mm (-10°C … +50°C) Resolution 0.1 mm Repeatability ≤ 0.5 mm Response time 100 ms ... 6 s (ILR 1181-30) 20 ms ... 6 s (ILR 1182-30) Laser according to IEC 825-1 / EN 60825 Red 650 nm, laser protection class 2, power ≤ 1 mW Beam diameter < 11 mm at 10 m distance Beam diameter < 35 mm at 50 m distance Beam diameter < 65 mm at 100 m distance Laser divergence 0.6 mrad Operating temperature -10°C … +50°C Storage temperature -20°C … +70°C Applications: RobFlow is a modular system. The scope of functions of the standard package can be supplemented with additional plugins for specific tasks as well as customer-specific extensions. With the help of the available functions, the following applications can be implemented, for example: Infotainment testing: Optical and haptic tests Individual actuations and path movements straight, meandering, curve segments Analysis and evaluation functions Steering column tests: Haptic tests along complex paths Large measuring range thanks to multi-calibrated force/torque sensor Easy to program thanks to RobFlow Air vent end-of-line tests: Haptic and optical tests Interchangeable test adapters for a wide range of devices Automatic testing, evaluation and marking including integrated leak test Vehicle seat tests: Functional and haptic tests Headrest distance measurements Comfort and stiffness evaluations Service life and fatigue tests The advantages of RobFlow at a glance: User-friendly operation No programming language knowledge required Variable and dynamic test sequences Branched process control Easy exchange of test programs between development and production Extensive analysis and evaluation functions Graphical display of measurement data and report generation Flexible and extensible through plug-in architecture Stäubli robot RX160 with 379 operating hours Controller CS8C RX160 Lifting capacity (nominal load - kg) 20 kg and handheld device SP1 Total weight 500 kg Type: Stäubli Robot RX160 with controller CS8C, handheld device, software, PC Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) Giodpfxezdyt Ao Actsw We would be happy to answer any further questions you may have on the phone.

Condition: like new (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 580 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 4,000 rpm, controller model: Contour 1, NC Milling Machine Deckel FP4A We are offering for sale a perfectly maintained Deckel FP4A CNC milling machine (very low operating hours, in as-new condition)! Technical Details: Gjdpfjxzpwfsx Actjiw - Travel (X): 580 mm - Travel (Y): 400 mm - Travel (Z): 450 mm (390 mm*) - Table size: 460 x 800 mm - Spindle speed range: 40 – 4000 rpm - Feed rate: 2 – 3600 mm/min - Rapid traverse: 4.0 m/min - Spindle taper: SK 40 - Machine dimensions (LxWxH): approx. 3.0 x 2.10 x 2.10 m - Spindle drive power: 4.0 kW - Control: Contour 1 Description: CNC-controlled tool milling machine, equipped with Contour 2 control. Features include a vertical head rotatable +/- 90° with quill travel of 80 mm, horizontal spindle, power feeds & rapid traverse on all 3 axes, hydraulic tool clamping, flying desk, electronic handwheel, automatic central lubrication, coolant system, safety emergency stop, chip tray, and separate electrical cabinet. The machine is in top working condition. Note: This additional information is standard for this model. Please always verify the exact configuration during inspection. The DECKEL FP4A Universal Tool Milling Machine, built in 1985, is a classic and highly versatile metalworking machine renowned for its precision and flexibility – testament to Deckel’s strong tradition of engineering quality. The FP4A features a robust bed-type construction, delivering the necessary stability for precise milling tasks. Its universal tool milling head is a highlight, enabling a wide spectrum of operations—from basic drilling to complex contouring and profiling. This versatility makes it a valuable asset in tool and die manufacturing, as well as mold making. Key technical features of the 1985 DECKEL FP4A include a generously sized worktable, infinitely variable spindle speed adjustment, and an intuitive control interface for efficient programming and machine operation. The advanced CNC technology contributes to exceptional accuracy and operator convenience. Despite its age, the DECKEL FP4A continues to be a trusted solution for applications requiring flexible tool milling. Its reputation for reliability and precision makes it an essential tool for modern metalworking and manufacturing operations. Deckel’s legacy of quality and innovation in the field of metal machining is clearly evident in this model.

Condition: used, Used focus parameter monitor for monitoring and analyzing laser processes in industrial production facilities. The system is used for process monitoring and quality control of laser optics and laser machining processes. Manufacturer: PRIMES Device type: Focus Parameter Monitor Model: FPM Condition: used Year of manufacture: 2018 Serial number: 16358 Communication interface: PROFINET 2 x Ethernet port COM interface DCP interface Service access available Status display: Link Tx/Rx MAC address: 00:03:F4:0B:04:B0 IP address: 192.168.116.119 Robust industrial housing made of aluminum Integrated carrying handle For laser process monitoring and focus analysis Location: Kusel Quantity: 2 units available Gijdpfx Aozdni Ejctew

Condition: good (used), Year of construction: 2017, functionality: fully functional, Dosing unit MOTAN Gravicolor 30 with GRAVInet Stock no.: 503694 Machine type/ Gsdpfxszdi Ngs Acteiw Device type: Dosing unit Manufacturer: MOTAN Type: Gravicolor 30 with GRAVInet Year of manufacture: 2017 GRAVICOLOR precisely mixes and doses up to six materials with the highest recipe accuracy. These modular, gravimetric dosing and mixing units are specifically designed for injection molding, blow molding, and extrusion applications with throughput rates of up to 2200 kg/h. Regardless of recipes, materials, or the application environment, IntelliBlend continuously analyzes all process data and achieves the best possible operating point at all times through self-optimization. The highest level of recipe adherence results in the best and most consistent product quality.

Year of construction: 2025, condition: new, ProdMa Sp. z o. o. specializes in stainless steel processing and configures stainless steel machines according to the customer's requirements and capacities. Efficiency, high productivity, and good customer communication are our top priorities. Accordingly, we focus on existing machines on the market, analyzing and optimizing problem areas to ensure complete customer satisfaction. Gijdorci U Hspfx Actow Here we offer the CB-80: Height: 2,000 mm Width: 1,120 mm Length: 4,890 mm Weight: approx. 800 kg Power: 50 Hz 360 V Power consumption: 1.64 kW Air pressure consumption: 1 m3/10 bar / 1 min. Peeling: 40 - 80 pieces / min Peeling diameter: 35 - 100 mm of unsorted onions

Year of construction: 2024, condition: new, functionality: fully functional, With the V.0102-gn, FOBA offers a marking laser in the green spectrum (532 nm wavelength) with low heat exposure. Thanks to 10 watts of laser power, markings can be applied with outstanding speed and contrast sharpness on surfaces that cannot be sufficiently marked with other wavelengths. This includes many white and transparent plastics, highly reflective metals and material combinations. Gedet Etkkspfx Actjiw Even red or orange plastic surfaces, which often offer poor contrast due to their color properties, receive perfectly legible codes and characters. The marking quality is also impressive on special plastics such as UHMWPE, HDPE and PMMA. In most cases, the green lasers also make laser additives superfluous. The FOBA V.0102-gn marking laser closes the gap between UV (355 nm) and fiber (1064 nm) laser systems and thus addresses the most challenging marking applications. The V.0102-gn is used in automotive and aircraft construction, as well as in medical technology, electronics, extrusion, but also in the marking of sensitive materials such as ceramics, flame-retardant plastics, plastics and materials for invasive purposes.

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Godpfewhdnhox Acteiw Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 226735, type of input current: AC, input voltage: 230 V, Equipment: type plate available, Qualification, commissioning and troubleshooting – intuitive, flexible, fast High data transfer rates of up to 10 Gbit/s Ethernet and new Power-over-Ethernet applications up to 90 W present entirely new challenges for structured cabling. The NetXpert XG2 offers comprehensive active and passive network testing up to 10 Gbit/s for the qualification, commissioning, and troubleshooting of copper and fiber optic cabling. Featuring the largest touch display in its device class, the NetXpert XG2 guarantees user-friendly operation and a clear presentation of results. At the same time, the NetXpert XG2 ensures maximum reliability of results thanks to the unique combination of up to four different testing methods for analyzing a data link. Flexible, scalable model range – upgradable from 1 to 10 Gbit/s The NetXpert XG2 and XG2-PLUS qualify twisted pair cabling from 1 to 10 Gbit/s. With their unique combination of four measurement methods, these devices verify whether your cabling can support interference-free Ethernet transmission up to 10 Gbit/s. The NetXpert XG2 is available in its base version from 1 Gbit/s and can be upgraded to 10 Gbit/s. The NetXpert XG2-PLUS comes fully equipped to also qualify fiber optic cabling up to 10 Gbit/s. SPECIFICATIONS – ALL VERSIONS Copper Interface 1 x Cat 6A RJ45, replaceable Fiber Interface 2 x SFP slot, 1 - 10 Gbit/s; (SFP modules to be ordered separately!) Length measurement technology TDR (Time Domain Reflectometry) and capacitive Cabling test and ID Up to 305 m Split-pair detection: 1 m to 305 m Length measurement: 0 to 457 m, ± (5%+30 cm) Distance to fault (short circuit): 0 to 200 m ± (5% + 1 m) Compatible with 8 pass-through test and up to 24 ID remote units (RJ45) (ID remote units only) Power over Ethernet (PoE) Tests according to IEEE 802.3af PoE (Type 1, max 15.4 W), IEEE 802.3at PoE+ (Type 2, 30 W) and 802.3bt PoE++ (Type 4, 90 W) Max. voltage Maximum voltage that can be applied to any two test inputs without damaging the tester: RJ-45: 60 VDC or 50 VAC Memory capacity Stores an unlimited number of cable or network tests per project with custom names Tone generator Tone frequencies: 730 Hz and 11.440 Hz Languages English, German, French, Spanish, Italian Giodeygwayepfx Actsw Battery Li-Ion, 7.2 VDC, 6.2 Ah / up to 4 hours (typical) External power supply 12VDC Permissible temperatures Operation: -10° to 60 °C Storage: -30° to 70 °C Permissible humidity 10% to 90%, non-condensing Housing Plastic injection-molded Display 7" TFT-LCD color display with capacitive touchscreen, 1024 x 600 resolution (WSVGA) Dimensions 245 x 177 x 73 mm (main unit) 130 x 177 x 55 mm (active remote) Weight with batteries 1.2 kg (main unit) 0.6 kg (active remote)

Condition: good (used), Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm Giodpfxswbd Twe Actjw -Weight: 7.9 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Headstock lathe KRAFT FB-15/20/25/30, brand new · 1500-3000mm faceplate · CNC or conventional. BRAND NEW HEADSTOCK LATHE KRAFT FB SERIES – FOR LARGE FACEPLATE WORKPIECES, FLYING UP TO 2 T The KRAFT FB series economically processes large, flat workpieces such as brake discs, flanges, wheels, bearing rings, or drum components. Four sizes with turning diameters from 1,500 to 3,000 mm and workpiece weights up to 2 t (flying) cover single-piece production to medium-sized series. Available as a conventional or CNC version (Siemens, Fanuc, or Fagor), optionally with or without a tailstock, bed longitudinally or transversely. KEY FEATURES Robust construction - Machine bed made of MEHANITE cast iron in one piece, bed width 450 mm, heavily ribbed - Hardened bed guideways, stress-relieved annealing - Guarantees long-term, highly precise operation without warping High-precision main spindle – accuracy class G1 - Inductively hardened, spindle bore up to 230 mm (option) - Spindle head in a compact design, large surface cross-ribs Powerful drive - Spindle motor 22 kW (29 kW optional), up to 600 rpm, high torque - Stepless spindle speed as standard CNC-capable from the factory - X/Z servomotors from Fanuc or Siemens - Ball screws X: Ø25 P5 C3, Z: Ø40 P10 C5 - Rapid traverse X/Z: 6/8 m/min Flying workpiece machining – the headstock lathe advantage - Workpieces clamped directly on the spindle head, without a tailstock - Optimal for flat, disc-shaped components with a large diameter OPTIONS CNC Siemens/Fanuc/Fagor · constant cutting speed · PARAT tool holder · C-axis + driven tools/milling unit · tailstock · spindle bore Ø 230 mm · spindle motor 29 kW Giedjc Txdhopfx Actew MACHINE DATA – FOUR SIZES KRAFT FB-15 - Turning diameter/faceplate: 1,500 mm - Spindle speed: 4–600 rpm - Z-axis travel: 1,000 mm - X/Z servomotors: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,000 kg, dimensions: 2200 × 2200 × 2500 mm KRAFT FB-20 - Turning diameter/faceplate: 2,000 mm - Spindle speed: 4–600 rpm - Z-axis travel: 1,000 mm - X/Z servomotors: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,500 kg, dimensions: 2200 × 2600 × 2750 mm KRAFT FB-25 - Turning diameter/faceplate: 2,500 mm - Spindle speed: 4–400 rpm - Z-axis travel: 1,500 mm - X/Z servomotors: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 8,000 kg, dimensions: 2500 × 3000 × 3100 mm KRAFT FB-30 - Turning diameter/faceplate: 3,000 mm - Spindle speed: 4–400 rpm - Z-axis travel: 1,500 mm - X/Z servomotors: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 10,000 kg, dimensions: 3000 × 3200 × 3350 mm COMMON DATA FOR ALL SIZES Turning length 330 mm · max. workpiece length 450 mm · bed width 450 mm · flying workpiece weight max. 3,000 kg · cross slide width 250 mm · X-axis travel 330 mm · spindle bore 155 mm (230 opt.) · spindle nose A2-11 (A2-15 opt.) · spindle taper 7 MK · 4 spindle speed stages · spindle motor 22 kW (29 opt.) · rapid traverse X/Z 6/8 m/min · 4-position tool holder, tool shank 32 × 32 mm CUSTOMIZABLE TO YOUR REQUIREMENTS Send us your specific application – workpiece spectrum, accuracy, desired control – we will configure the FB series according to your needs. Attractive leasing and hire-purchase conditions available through our partners. On request, delivery including installation, commissioning and training of your operating personnel.

Condition: used, functionality: unexamined, machine/vehicle number: SX-50, Used Cameca SX-50 Electron Microprobe Giedewnb D Topfx Actjw Cameca SX-50 electron microprobe is used (Electron Probe MicroAlalyses). it has a 6” inch stage, 3 WDX Spectrometers with several Cristals LiF, PET, TAP, ODPb, PC1, PC2, PC3. Electron probe microanalysis (EPMA) are generally considered micro-analytical techniques which are able to image or analyze materials we can not generally observe with the resolution offered by visible techniques System is complete with all Books, service Manuals, Software and computer. Also many parts. 1 x Leybold Trivac D16B Vacuum Pump 1 x Alcatel 2012 A Vacuum Pump 2 x integrated Turbo Pumps

Condition: good (used), Year of construction: 1995, FINIX 500 is a finishing system flexo photopolymer plates up to 500 x 800 mm (about 19 "x 31"). This finishing unit has the exposure section with ultraviolet lamps and sliding tray is entirely made of stainless steel, which is produced after posteksponirovanie normal processing, including preliminary exposure, exposure, washing and drying, are usually performed FLEXO apparatus 3 or 5. When the normal process is completed, fleksoplastina usually dry to the touch, but sticky and you must give it rigidity posteksponirovaniem. FINIX 500 eliminates the tackiness while giving the plate rigidity and making it durable and resistant to abrasion and mechanical stress by exposing respective light sources. Exposure is carried out two types of lamps emitting ultraviolet radiation with different spectrum, each of which produces a certain effect on the wafer. Special germicidal lamps eliminate tackiness, and UV lamps complete posteksponirovanie plate, making it harder. The exposure time for each type of lamp can be set independently of each other, enabling the simultaneous or separate exhibition with different duration. Each type of light is controlled by its own control panel with digital display. FINIX also presented a model 120 plates measuring 35 "x 47" (900 x 1200 mm). UV lamps bactericidal lamps FX 14x30 w 2x20 lamp cooling system posteksponirovaniya timer digitale Timer finisher digitale exhaust system Power 380V, 3 phase, 50 Hz Gisdpfxocwi Tfj Actew dimensions 108 x 92 x 42 (H) cm net weight 130kg

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23352279, type of input current: three-phase, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 460 kg, power: 5.5 kW (7.48 HP), compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, SICK MCS 100FT/F CEMS System (2023) - Unused / Zero Hours - QAL1 Certified Gjdpfx Acey A Nu Astjiw Available for immediate sale: A complete, unused (zero hours) Continuous Emission Monitoring System (CEMS) SICK MCS 100FT/F, manufactured in October 2023. This is a turn-key solution featuring advanced multi-component analysis technology. Key Technical Specifications: - FTIR Technology: Simultaneous measurement of SO2, NO, NO2, CO, CO2, HCl, HF, and H2O - FID (TOC) Analyzer: Integrated total organic carbon measurement - Zirconia Sensor: Integrated O2 measurement - Certification: Fully QAL1 certified (EN 15267 compliant) - Acid Mist Protection: Includes special cabinet with Acid Mist Absorber Box (ideal for H2SO4 protection during petcoke combustion) Complete Package Includes: - SICK MCS 100FT/F Analyzer Cabinet - Sampling Probe - 20m Heated Sampling Line - MEAC/DAU Data Acquisition System Condition: Brand New / Unused Availability: Immediate (Ex-stock) Ideal for cement and lime plants, refineries, and power generation facilities looking for a high-end upgrade without the manufacturer's lead time. FAT reports and technical manuals are available upon request.

Condition: used, mileage: 4,50,121 km, power: 213 kW (289.60 HP), first registration: 05/2010, fuel type: diesel, empty load weight: 8,860 kg, maximum load weight: 6,140 kg, overall weight: 15,000 kg, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,150 mm, brakes: constant throttle, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 2,600 mm, total width: 3,670 mm, loading space length: 7,450 mm, loading space width: 2,470 mm, loading space height: 2,380 mm, Equipment: ABS, air conditioning, cabin, central locking, differential lock, fog lights, low noise, parking heater, seat heater, Vehicle location: Bovenden, registration house, 2x air seat, heated seats, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, radio-CD, auxiliary heating, ABS (anti-lock braking system), constant throttle, automatic transmission, differential lock, fog lights, driving lights, leaf-air suspension, low-noise G1, portal doors, side aluminum driving protection, side door right, roof hatch, central locking, cooling unit diesel/electric, Green environmental sticker Wheelbase: 5150 mm Body: freezer box with partition wall & Thermoking TS500 Spectrum refrigeration unit Diesel hours: 4797, electric hours: 49, ZF 12AS TipMatic gearbox, lashing strip, refrigeration curtain, partition wall! Tail lift available at an extra charge! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gsdpfxovhhmpo Acteiw - .

Condition: used, mileage: 1,69,478 km, power: 172 kW (233.85 HP), first registration: 03/2021, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 2,290 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, DAF LF 230 Schmitz refrigerated box body, 2 compartments * Schmitz refrigerated box body * BÄR underfold tail lift, 1,500 kg lifting capacity * Air conditioning * Rear view camera * Thermo King T-800 R Spectrum * 2 compartments * Loading space length: 7.2 m * Loading space height: 2.29 m Gisdpfsyzk Smjx Actsw * Loading space width: 2.5 m * German truck * 1 previous owner * Schmitz refrigerated box body * Left cooling compartment dimensions: 83 cm width * Right cooling compartment: 83 cm width, 4.6 m length, lockable by fold-down door * Thermo King operating hours: Diesel: 4,382 h, Electric: 47 h * Webasto heater * Air conditioning * Differential lock * Cruise control * Tyres: front 245/70 R 17.5, 6/7 mm tread * Rear: 245/70 R 17.5, 8/8/9/9 mm tread * Main inspection / safety inspection renewed before sale * All information without guarantee * Further details and additional services upon request * Repainting, retrofitting possible * Short-term license plates / export plates * Transfer and shipping possible * Assistance with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing available. We have worked with various leasing companies for many years and can therefore offer optimal financing solutions for each customer. We can often help clients with less-than-perfect credit and connect them with suitable leasing partners. * Own workshop * We speak Polish, English, and Russian. * The repainting in your desired color is possible in-house at a reasonable price and with high quality. * Are you located further away and unable to visit us to inspect and check the truck? No problem. You are welcome to appoint an independent expert of your choice to carry out a technical and visual inspection of the truck. Should an issue arise contrary to expectations, we can resolve it quickly and effectively in our workshop. Furthermore, for an additional fee, we can deliver your newly purchased used vehicle Europe-wide.

Condition: used, mileage: 6,98,811 km, power: 315 kW (428.28 HP), first registration: 11/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 49 m³, loading space length: 7,900 mm, loading space width: 2,480 mm, loading space height: 2,520 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * ANTOS 2543 L REFRIGERATED MEAT BOX BODY with 3 rail systems + 2 t tail lift * THERMOKING T-1200 Spectrum (diesel engine) and standby cooling, 380 V ELECTRIC * WILKE refrigerated box, dual-chamber system (first chamber 1.58 m + second chamber 0.87 m wide) * Vehicle number for customer inquiries: 4047 * Engine specification Euro VI, version 2 * Active Brake Assist * Rear axle differential lock * Air conditioning * Rear air suspension * Lane Keeping Assistant * Environmental badge (green) * Tail lift * Standard trailer coupling, D40, Ringfeder * High performance engine brake * Axle configuration 6x2 * Full service history * Stability Control Assistant (ESP) * 500 l tank, left, 650 x 565 x 1600 mm, aluminium * Front axle air suspension * Additional hot water heater, cab * Two-line trailer brake, brake connections left * Antos * Air horn * Electronic brake system with ABS and ASR * Comfort driver's air-suspended seat * G 211-12/14.93-1.0 transmission * Central locking with comfort function * Mercedes PowerShift 3 * Tag axle, 7.5 t, unloadable, liftable * Particulate filter * External sun visor, transparent * Digital tachograph, EU, rpm * Cruise control * Two-seater * 60 l AdBlue tank, left * Starting aid, speed limiter 30 km/h * 24 V, 15-pin trailer socket * Roof hatch/roof ventilation flap * Heating, electronic air supply unit * M cab * M-Cab ClassicSpace, 2.30 m, 320 mm tunnel Gedpfxeumfrpj Actsiw * Engine OM470, inline 6, 10.7 l, 315 kW (428 hp), 2100 Nm * Wheelbase 4,900 mm * Tubeless tyres, 315/70 R 22.5 rear axle * Tubeless tyres, 315/70 R 22.5 front/leading/lifting axle * Sunblind, driver's side * Pre-equipment for toll collection * Additional stabilizer, rear/tag axle * Attention/alertness assistant * Fan, crankshaft driven * Smoker's package * Heavy vehicles from 18 t, on-road * Scope EAPU, 1st position * Pre-equipment for tail lift control * Extended battery cables * 2/3 door No liability for typographical or misprints. Sale to trade customers only. Errors and prior sale reserved. Modifications, interim sales and errors explicitly reserved. The description serves for vehicle identification only and does not constitute a guarantee in the sense of commercial law. The contract description is binding. * TOP SERVICE & QUALITY * We are happy to provide you with a LEASING-FINANCING-HIRE PURCHASE offer * Warranty insurance available on request from the insurer * TÜV / UVV tail lift inspection / tachograph check and installation of OBU device by our local partners * Export plates for 30 days * All export documents can be provided upon request * Toll-Collect can be booked in-house * Free transfer from Stuttgart airport or Metzingen railway station (Württ) * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit our website at * Over 200 vehicles always in stock

Year of construction: 2013, condition: excellent (used), Scheugenpflug DOS P016 Piston Dispenser DOS P Piston Dispensing System For a wide range of requirements Scheugenpflug piston dispensing systems operate on the principle of volumetric dispensing; the quantity of material dispensed is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material via a connected material supply system. When a two-component medium is used, the ratio of resin to hardener is simultaneously determined by the volumes of the two cylinders. The dispensing pistons simultaneously force both components through separate channels toward the outlet valve, where they only mix within the static mixing tube to form a homogeneous, reactive medium. Gisdpfx Acszc Npletjw The DOS P016 / 050 / 100 / 300 / TCA piston dispensing systems are high-precision volumetric units designed to process both single-component (1K) and two-component (2K) materials, covering a wide spectrum of application requirements. Precisely dimensioned dispensing cylinders ensure the delivery of reproducible material volumes. For 2K materials, the parallel emptying of both cylinders into the shared mixing tube ensures a consistently stable mixing ratio at all times, thereby guaranteeing maximum process reliability. At the same time, this method allows for the gentle handling of potting media that are sensitive to pressure, moisture, or shear forces, without the risk of material degradation. Users also benefit from quick and easy maintenance, long service lives, and significantly reduced upkeep costs. Optional features—such as valve monitoring, mixing tube heating, or dispensing head heating—allow these systems to be flexibly adapted to specific application requirements. Your benefits Dosing accuracy independent of temperature, pressure, or viscosity Constant mixing ratio at all times due to parallel emptying of dosing cylinders Wide range of applications (in terms of materials and use cases) Key functions Simultaneous cylinder discharge via a shared stroke mechanism ensures a homogeneous mixing ratio Sensor-based monitoring of inlet and outlet valves as well as cylinder filling Material temperature control via mixing tube heating (optional) Camera-based dispensing needle monitoring (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to high-viscosity Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure, and casting resin viscosity Precisely reproducible and highly accurate results Maximum process reliability Applications Potting, sealing, bonding, application of thermal interface materials, sealing, encapsulation (Glob Top) DOS P016 Max. volume/shot (2K at 1:1 ratio) 1K: 0.06/17 ml 2K: 0.1/32 ml Max. dispensing speed [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatability [°C]: up to 80 Outlets: 1K: 1–4, 6, 8 2K: 1–4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on operation "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional dosing units—new and used—in our shop! International shipping costs available upon request!

Condition: used, mileage: 6,25,811 km, power: 151 kW (205.30 HP), first registration: 11/2006, fuel type: diesel, overall weight: 11,990 kg, next inspection (TÜV): 04/2026, color: blue, gearing type: automatic, emission class: euro4, loading space volume: 33 m³, loading space length: 6,000 mm, loading space width: 2,450 mm, loading space height: 2,250 mm, Year of construction: 2006, Equipment: ABS, tail-lift, * MAN TGL 12.210 BL refrigerated box truck, 6 m, with MBB 1.5-ton loading platform. * THERMOKING T-1200 SPECTRUM (diesel engine) and auxiliary cooling 380 V ELECTRIC * EBS / ABS fault present + no TÜV (technical inspection) !! * SPECIAL SALE PRICE !!! * Vehicle number for customer inquiries: 4621 * Automatic transmission * Environmental badge (green) * Air suspension * Loading platform * EBS * Engine type EURO 4 * Electric windows * Anti-lock braking system (ABS) * Two-seater * Power steering * Steel rims * Well-maintained with service booklet * Traction control * 2/3-door No liability for printing and typographical errors Sales only to commercial businesses Errors and prior sales excepted* Changes, prior sales and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase agreement shall be binding. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING/FINANCING/RENT-TO-OWN offer Guarantee insurance possible upon request from the insurer * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners * Customs license plates for 30 days All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. Gedpsylq I Uofx Actoiw * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Constantly over 200 vehicles in stock