Used Spectrum Analyzer for sale (246)

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Layers: 5 Web Width: 1,500 mm Film thickness range: 10–45 μm Output: - 15 μm: up to 745 kg/h - 17 μm: up to 845 kg/h - 23 μm: up to 905 kg/h Final film widths (per bobbin): - 3 x 500 mm - 6 x 250 mm - 3 x 400 mm - 2 x 750 mm Coextrusion Structure / Number of Layers: 5 layers Layer distribution: B / A / D / A / C Percentage: 10 / 35 / 10 / 35 / 10 % Raw materials: - LLDPE: 2.8–5.0 g/10min (190°C/2.16kg) - VLDPE: 2.8–5.0 g/10min (190°C/2.16kg) Extruder "A": 90/33 L/D, Maximum LLDPE output: 800 kg/h Extruder "B": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "C": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "D": 60/28 L/D, Maximum LLDPE output: 200 kg/h Flat die lip width: 2,050 mm Roll width: 2,100 mm Chill roll C1 diameter: 1,600 mm Maximum mechanical speed: 650 m/min MATERIAL FEEDING AND DOSING "A": - 1 main component material feed - 1 additional component material feed - 1 gravimetric batch dosing system (mounted directly on the extruder, 3 components) MATERIAL FEEDING AND DOSING "B, C, D": Iedpfx Asxyuffsdwoht - 3 main component material feeds - 6 additional component material feeds - 3 gravimetric batch dosing systems (mounted directly on the extruder, 3 components each) Extruder "A": - SML Single-Screw Extruder SML-ES-90/33 - Tool unit: Manually operated screen changer SML-MF-man/90 Extruder "B, C, D": - 3 SML Single-Screw Extruders SML-ES-60/28 - 3 Tool units: Manually operated screen changers SML-MF-man/60 Cloeren 5-layer/3-up Stretch Film System consisting of: - 1 five-layer feedblock FG - 1 automatic flat die, 2,050 mm (for automatic die control) - 1 die splitting system for flat die body separation and cleaning - 1 vacuum box, 2,050 mm - 1 triple-chamber vacuum box SML-TC/2050mm Cooling and take-off unit: - 1 casting section SML-CS/2100/650 - 1 electrostatic edge pinning device - 1 thickness measuring unit (X-ray sensor for automatic dies, stretch wrap film) - 1 recovery system for feeding stretch wrap film with vertical scraptruder for SML 90 mm single-screw extruder - 1 antistatic pipe - 1 power supply unit for antistatic pipes Winding unit: - 1 Cast Film Turret Winder Series W4000 for stretch wrap films - Max. end film width: 3 x 500 mm - Number of turrets: 1 - Number of winding shafts: 4 - Winding shaft diameter: 3" - Max. mechanical winding diameter (3" bobbins): 400 mm - Min. winding diameter: 82 mm - Winding tension: 15–100 N/m - Contact pressure: 50–500 N - Cycle time (3" core magazine): 20–25 s - High-speed Cast Film Turret Winder for stretch wrap film—compatible with 3" air shafts, contact winding mode - 1 automatic core and roll handling system W4000 4S1T (per turret) - 1 oscillating frame SML-OF/2100 Control and data logging: - 1 SML Automatic Control System SML-CS-2/SMILE/4 extruder - 1 SML Data Logging System: SMILE Process Analyzer - 1 E-container (20 ft) Chiller: Frigosystem Compressor unit: MSD V 30-37

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Ihodpfx Aoxzuiaedwet

Year of construction: 2021, operating hours: 10 h, condition: like new (used), functionality: fully functional, Kinexus lab+ rotational laboratory rheometer, configured with C25 cylinder package and 50N force cell, ideal for standard rheological applications in research and quality control. This equipment is designed for analyzing the rheological behavior of liquid and semi-solid materials, including viscosity, flow, thixotropy, and oscillatory testing. The lab+ platform offers precise control, thermal stability, and an intuitive interface, making it suitable for laboratories in the chemical, food, cosmetic, pharmaceutical, and polymer industries. Key features: Nsbk Rewp Inbslfcpsda Model: Kinexus lab+ C25 cylinder package - ideal for cylindrical (Couette) geometry measurements Maximum normal force: 50N - for sensitive applications and materials with low shear resistance Robust construction and high precision Ihjdoxp H Ukspfx Adwst Compatible software for advanced control and analysis Available immediately

Condition: like new (used), Year of construction: 2021, operating hours: 22,000 h, functionality: fully functional, total length: 4,670 mm, total height: 1,690 mm, total width: 1,370 mm, input voltage: 400 V, overall weight: 1,400 kg, compressed air connection: 6 bar, air demand: 0.2 m³/h, - Installed on April, 2021 - End of use on November, 2023 (Approximately 2 years and 7 months use) - Store from December, 2023 with vinyl wrapping Ilapak's Delta 3000 horizontal flow wrap packaging machine is PC controlled and equipped with long dwell technology for modified atmosphere packaging (MAP) and Ilapak's unique high-speed hermetic sealing technologies to cover the widest range of applications. Its heavy duty and reliable design allows the Delta 3000 to be integrated in automatic packaging systems. All Delta 3000 horizontal flow wrap machines are also available in stainless steel and bottom film feeding versions. One of the most effective ways to extend the shelf life of fresh products is to pack them in a hermetically sealed pack with a modified atmosphere (MAP – Modified Atmosphere Packaging). Our robust Delta flow wrap machines are precisely engineered to ensure hermetic sealing at high speed. Thanks to the flexibility of its design, the Delta series of packaging machines are also ideally suited for non-food applications where a hermetically sealed pack is required, such as medical and personal care products like wet wipes. * Main Feature - Upgradable machine configuration - Long dwell sealing jaws technology - Separated electrical control - Electronic machine with commercial available components * Benefits Ihsdpjt Dg Itofx Adwjt - Possibility to expand & connect the machine with different feeding systems - To perform hermetic sealing and MAP applications while managing a wide range of wrapping material characteristics - Easy accessibility during maintenance operation - Higher reliability components - Easy maintenance * Technical Data - Capacity: 25 - 100spm based on 4 ~ 1 line stack - Modified Atmosphere: N₂/CO₂ Mixer including O2 analyzer - Dimension: 4,666mm(L) X 1,367mm(W) X 1,689mm(H) including infeed line - Power Supply Spec.: 3P, 400V, 50Hz, 7kVA - Air Supply Spec.: 6 bar, 0.2m³/h - Machine Speed: Up to 100 cycles per minute Production output depends on film sealability and product characteristics - Film Cut-off: Min 100mm - 4.0” / Max 1200mm - 47” Depending on film and product characteristics - Film Reel Max Weight: Depending on film reel width, up to 75 kg - 165 lbs - Electronic Platform: Industrial PC

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Isdpjvu Syysfx Adweht Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Condition: used, mileage: 3,66,800 km, power: 137 kW (186.27 HP), first registration: 04/2015, fuel type: diesel, overall weight: 10,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, loading space length: 6,300 mm, loading space width: 2,280 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, tail-lift, 2-seater, power steering, 6-speed manual transmission, electric windows, electric exterior mirrors, heated exterior mirrors, on-board computer, Euro 6, air conditioning, radio-CD, leaf springs at the rear, Waeco reversing camera, Thermo-King T800 Spectrum cooling unit, power connection, wing doors at the rear, side door/right, Dhollandia tail lift, total length: 8,102mm, width: 2,400mm, height: 3,500mm, empty weight: approx. 6855kg, wheelbase: 4,185mm etc. Errors + prior sale + typos reserved. Only sold to businesses and export. !!!! Fg-6018 !!!!Key no. 217 !!!!! Test/inspection drive to Tüv Dekra or Iveco possible !!!!! Ihedpfx Aormhrgodwst

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar Iedpexwhw Ajfx Adwjht FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: excellent (used), Very well maintained blood analyzer type Reflotron IV of the world brand Roche, wave range: 567-951 nm. The device has a printer interface and connection for keyboard, and is supplied with the accessories shown. All devices were manufactured in Germany and used very little by federal companies, condition is optically and technically flawless. Iodpfx Ajq Stvujdwjht The following measurements can be carried out with the Reflotron system: - Glucose - cholesterol - triglycerides - HDL cholesterol - GPT (ALAT) - GOT (ASAT) - GGT (gamma-GT) - creatinine - urea - uric acid - Potassium - Alkaline phosphatase - Hemoglobin - Bilirubin - Creatine kinase (CK) - Amylase - Pancreatic amylase Scope of delivery: - Reflotron IV blood analyzer - Rack for accessories - Pipette for Reglotron IV - Applicator - Power supply unit - Manual German, English All components are in very good optical and technical condition and can be used immediately. Some discoloration on the housing is due to storage and does not limit the usability of the system in any way - see pictures. The system shown is for illustrative purposes only, all systems offered are in comparable condition. The sale is aimed exclusively at traders, you will of course receive an invoice with VAT shown. Private buyers have the opportunity to purchase the device "on behalf of a customer", a direct commercial sale to private individuals expressly does not take place! For professional use, the tests prescribed by the respective national law, such as STK / MTK, must be carried out. The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health. If you have any queries, please contact us directly using the contact details provided.

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 1099883, operating hours: 100 h, Demag end carriage pair End carriage DRS315 Hoist unit EZ DR20 Trolley gauge 2240 mm Reeving 4/1 The crane shows virtually no wear, very little use in a machine construction factory. Dismantled in July 25 and stored dry. Complete with documentation and HBC Spectrum radio remote control. All motions with frequency inverter! Ijdpfow H S Avsx Adwjht Modifications can be offered separately.

Condition: used, operating hours: 40,000 h, Krones Contifeed Preform Feeder The Krones Contifeed preform feeder is designed for the precise and efficient feeding of PET preforms into the blow molding machine. It operates using a roller sorter system that gently handles preforms of various sizes, ensuring they are properly aligned before entering the blow molder. The Contifeed system offers quick and infinitely variable adjustments, allowing it to accommodate different preform types and sizes with minimal manual intervention. The system is available in three different lengths to match the output of the blow molding machine and includes options for automatic adjustment, making it highly flexible and adaptable to different production requirements. The design also includes features like automatic troubleshooting and easy access for maintenance, ensuring high operational efficiency​. Krones Preform Check Inspector The Krones Preform Check Inspector is a sophisticated, inline inspection system designed to ensure the quality and integrity of PET preforms before they enter the blow molding process. Recognizing that the quality of the final bottle is heavily dependent on the condition of the preform, this system plays a critical role in maintaining high production standards and reducing waste in bottling operations. The Preform Check Inspector utilizes advanced vision technology, incorporating high-resolution cameras and specialized lighting to conduct a comprehensive analysis of each preform. As preforms pass through the inspection station, they are subjected to multiple checks that assess various quality parameters. These include detecting surface defects such as scratches, dents, or contaminants, as well as identifying dimensional inaccuracies like ovality or variations in wall thickness. One of the key features of the Preform Check Inspector is its ability to perform 360-degree inspections. This is achieved by rotating each preform in front of stationary cameras, allowing for a complete examination of the entire surface area. This comprehensive approach ensures that even minute defects, which could compromise the integrity of the final bottle, are reliably detected. The system is also equipped with specialized software algorithms that analyze the captured images in real-time. These algorithms are calibrated to distinguish between acceptable variations and actual defects, minimizing false rejects and ensuring that only preforms that truly fail to meet quality standards are removed from the production line. This precision contributes to optimal material utilization and cost efficiency. Isdpfx Adovgvl Rsweht Integration with the overall production line is seamless, as the Preform Check Inspector can communicate with upstream and downstream equipment to synchronize operations. In the event of detecting a defective preform, the system can trigger reject mechanisms to remove the faulty item without interrupting the flow of production. Additionally, the system’s data logging capabilities allow for tracking defect rates and identifying patterns, which can be invaluable for quality control and process improvement initiatives.

Condition: used, Non-returnable PET filling line, consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in 4x5 arrangement) - PET shredder (Strautmann BrikPress 240, year of construction 2019) - Crate washer with cleaning nozzles - Preform feeding device - Stretch blow-moulding machine (SIPA, type SFR 8 EVO, with 8 cavities) - Stretch blow-moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Premix system (Procomac Starmix, built in 2001, 200 hl/h) consisting of water deaeration, mixer and carbonisation with a total of 4 tanks and two cartridge filters for water treatment. - Velcorin dosage (dmt, Burdomat II G) - Capping task and cap conveying system - PET bottle rinser, filler and capper (Procomac) - Fill level control (Heuft Spectrum TX) with rejection - Labelling machine (P.E. Futura) for hotmelt labelling of wrap-around labels, in a block with dating (Videojet) - Crate packer (BMS) - Free, driven conveyor lines for bottles and crates Additional title: non-returnable PET filling Capacity: 16000 bo/h Ijdpjw Uvd Tofx Adwsht Formats: 0.5 litre disposable PET bottles, 20-bottle crates Features: Bottle ejector, crate washer, shredder, preform feeder, 2 x stretch blow moulder, premixer, velcorindosage, cap feeding and conveying, rinser/filler/capper, fill level control, labeller, dating, packer, Free crate and bottle transport

Year of construction: 2025, operating hours: 100 h, condition: used, functionality: fully functional, HMD-G200 — High-Performance Rotary Packaging Machine The HMD-G200 is a robust rotary packaging machine designed for the automatic filling and packaging of a wide variety of products – from fine powders to granular or coarse products such as nuts, pulses, rice, seeds, or snacks. It delivers high precision and ease of operation, guaranteeing maximum productivity in your operations – ideal for small, medium, and large enterprises in the food, chemical, cosmetics, and pharmaceutical sectors. ⚙️ Main Features Fully Automatic Packaging System: Fully automated process including bag feeding, opening, dosing, sealing, and date printing, ensuring efficient and uninterrupted production. Versatile Applications: Suitable for a broad spectrum of products: Powders: e.g., flour, spices, protein powders Granules: e.g., lentils, beans, rice, nuts, snacks, seeds Granulates or blends Compatible with Pre-Made Pouches: Processes pre-made, high-quality pouches made from multilayer composite films or paper – with or without zipper. High-Precision Dosing: Features an integrated auger filler or optional volumetric dosing unit for precise filling by weight – with accuracy of ±0.3–1.5%. Intuitive Siemens Control Panel: Modern Siemens touchscreen interface for complete control of all parameters; simple and user-friendly operation. Hygienic Stainless-Steel Construction: All product-contact parts are manufactured from stainless steel 304 or 316, comply with international hygiene standards, and are easy to clean. Safety & Efficiency: Automatic fault detection prevents sealing defects or product spillage. Integrated alarms for air pressure, overload, and bag errors enhance operational safety. 🔩 Technical Data Parameter Value Model HMD-G200 Packing speed 20–45 bags/min Bag size Width: 90–200 mm / Height: 150–350 mm Bag type Pre-made pouch with/without zipper Power consumption 2.1 kW Power supply AC 380 V ±10%, 3 phase, 60 Hz Compressed air 5–8 kg/cm², 0.4 m³/min consumption Noise level ≤ 80 dB Bag opening Vacuum suction Additional features Date printing, nitrogen flushing, vibration, air exhaust 🧠 Brand-Name Components Component Manufacturer Touchscreen & Controls SIEMENS Ijdjxqccmjpfx Adwoht Frequency inverter Bosch Rexroth Temperature controller/relays OMRON Pneumatics/valves AIRTAC / Festo Vacuum pump ORION 🚀 Scope of Delivery Auger filler for powdery and fine-grained products Stainless steel screw conveyor for automatic product feeding Integrated date coding printer Horizontal conveyor belt for discharging finished pouches 💡 Your Major Benefits ✅ Labor cost reduction via full automation ✅ High output speed with consistently high quality ✅ Flexible application for powders, nuts, pulses, and mixtures ✅ Hygienic, dependable, and low-maintenance ✅ Simple operation with intelligent Siemens controls

Condition: ready for operation (used), An Alpha rubber process analyzer for testing the rheological and dynamic properties of elastomers and rubber compounds is available. Frequency range: 0.1-3000cpm, max. temperature: 230°C, max. heating rate: 1°C/s, max. cooling rate: 0.5°C/s, max. strain: +/-90°, test standards: ASTM D5289/D6048/D6204/D6601/D7050/D7605/D8059. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Including PC with Eclipse software and spare parts. Documentation available. On-site inspection possible. Iedpfx Ajxrukxodwjht

Year of construction: 2025, condition: new, Autonomous RS1 and modular RS2 containers in the CompoFlow system represent the latest solutions for the biological processing of organic waste. Designed for mobile and decentralized biowaste collection (RS1), as well as stationary operation at composting facilities (RS2). Ihedpfx Aoikq Eyodwst Perfect for ensuring a controlled process of composting, biodrying, and biostabilization, along with efficient organic waste logistics. Each composting system is tailored to the individual needs of the client. After analyzing the material intended for processing, we specify the required number of containers and the necessary composting capacity. Made in Poland – Eco-friendly – Durable – Certified – EU compliant Composting significantly increases recycling rates. RS TEAMTECH Sp. z o.o.

Condition: used, empty load weight: 8,920 kg, maximum load weight: 30,080 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 02/2014, loading space length: 13,360 mm, loading space width: 2,470 mm, loading space height: 2,640 mm, loading space volume: 87 m³, total length: 13,360 mm, suspension: air, tire size: 385/65 22,5, tire condition: 50 %, color: silver, Year of construction: 2013, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, cooling unit, truck registration, Reference number for inquiries: 403521 Lambert, LVFS3 * Year of manufacture: 2013 * ABS, Anti-lock Braking System * Air suspension * Lift axle * Rear portal doors * Refrigerated body Iodpextimwofx Adwjht * Air coupling head (red + yellow) * Spare wheel carrier * Connection plugs 2x7-pin * Connection plug 15-pin * Lifting and lowering device * Storage/toolbox * Deep-freeze compartment * Temperature recorder * ISO partition wall * Bi-temperature with evaporator/partition * Thermoking refrigeration unit * Diesel + electric operation * Suspension type: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 8,920 kg * Payload: 30,080 kg * Permissible total weight: 39,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 50% -- 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 30% -- 40% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 70% -- 40% - Tire size: 385/65 R22.5 * Tire size: 385/65 R22.5 * Internal dimensions: L=13,360 mm, W=2,470 mm, H=2,640 mm * Internal volume*: 87 m² * Pallet spaces: 33 * Refrigeration unit: Thermo King * SLXe Spectrum * Diesel operating hours: 13,069 hrs * Electric operating hours: 6,738 hrs Disclaimer: Subject to changes, prior sale, and errors excepted. More images and videos are available on our website. Our comprehensive service includes, for example: * Purchase / sales / rental of commercial vehicles * Fast, straightforward financing * Handling of all (export) documents * Ordering of export/license plates / customs plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists, we are happy to advise you.

Condition: good (used), CEIA THS optimizes sensitivity to all metal contaminants while minimizing product effect across a wide range of products. It employs an autolearn function that explores a spectrum of frequency bands to determine the best operating conditions, achieving high performance levels for detecting magnetic and non-magnetic metals. The metal detector has a compact and robust construction, high immunity to environmental interference, and is suitable for a wide range of industrial applications. Equipped with product ejection system which uses compressed air stream. Gate dimensions: W: 450mm x H: 250mm Ihjdpfxjq Umadj Adwjt Total dimensions: L: 2200mm x W: 1400 x H: 1800mm

Condition: used, Year of construction: 2016, Heuft empty bottle inspector with: - Infeed inspection with belt stop - Bottom inspection - Mouth inspection - IR residual liquid detection - HF residual liquid detection - Simple lateral migration detection in the outlet - Single-segment rejection with rejection control Additional title: Bottle inspection machine Capacity: 8000 bottles/h Voltage: 400 Volt Frequency: 50/60 Hertz Compressed air: min. 5 bar Length: 2030 cm Width: 950 cm Iodpfx Adow S T N Iewoht Height: 1830+conveyor height cm Weight: 1600 kg Running direction: from right to left Operation / Control: Heuft Spectrum reflexx, Heuft speedy environment control for controlling the motors Position: free standing Periphery: Synchronised container transport segments after the inspector

Condition: used, Year of construction: 2016, operating hours: 500 h, functionality: fully functional, the Mettler Toledo analyzing equipment Excellence T7 with accessories has not been in operation since 2024 Ihsdpfx Ajwhlctjdwot

Condition: used, Year of construction: 2011, Overview This cold glue labeller was manufactured in 2014 by the German company HEUFT. It was used for the labelling and inspection of glass bottles including control of label presence, underfill detection by X-ray, and bottle breakage detection with automatic rejection. The machine includes special equipment for bottles with neck foil. It comes with 6 format parts. The Domino laser, vacuum unit and glue pumps are not included in the scope of delivery. It is available immediately and can be viewed by appointment. Technical data  Type: Cold glue labeller with 2 labelling stations (8 glue pallets, 6 gripper positions, machine pitch 120 mm) Capacity: up to 36,000 bottles per hour (max. output without orientation, as per documentation) Container type: glass, transparent Container diameter: 59-67.5 mm Container height: 226-260 mm Closure material: metallic, closure diameter: 28 mm Belt height: 1000 mm Electrical connection: 400 V, 50 Hz Max. Ambient temperature: 40 °C Device diameter container carousel: 1150 mm Control functions (Spectrum TX): Label control (sensors), underfill control (X-Ray), bottle breakage control, rejection Special feature: Processing of NRW bottles with neck film Scope of Delivery  HEUFT Tornado W incl. 2 cold glue stations Spectrum TX control system 6 format parts Without domino laser, vacuum cleaner and glue pumps   Ihsdpfjwz Evysx Adwst

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Ihodpfx Ajfz Dubjdwst Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, empty load weight: 8,920 kg, maximum load weight: 30,080 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 02/2014, loading space length: 13,360 mm, loading space width: 2,470 mm, loading space height: 2,640 mm, loading space volume: 87 m³, total length: 13,360 mm, suspension: air, tire size: 385/65 22,5, tire condition: 50 %, color: silver, Year of construction: 2013, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, cooling unit, truck registration, Reference number for inquiries: 40352 Lambert, LVFS3 * Year of manufacture: 2013 * ABS, Anti-lock braking system * Air suspension * Lift axle * Portal doors * Refrigerated box body * Air connection coupling heads (red + yellow) Ihsdpfoxtiixox Adwot * Spare wheel holder * Connection plugs: 2x 7-pin * Connection plug: 15-pin * Lifting and lowering device * Storage/toolbox * Deep-freeze compartment * Temperature recorder * ISO partition wall * Dual-temperature with evaporator/partition wall * Cooling unit: Thermo King * Power supply: Diesel + electric * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 8,920 kg * Payload: 30,080 kg * Permissible total weight: 39,000 kg * Axle manufacturer: BPW * Tire condition front axle: 50% -- 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 30% -- 40% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 70% -- 40% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=13,360 mm, W=2,470 mm, H=2,640 mm * Internal volume*: 87 m³ * Pallet spaces: 33 * Refrigeration unit: Thermo King * Model: SLXe Spectrum * Diesel operating hours: 13,069 h * Electric operating hours: 6,738 h Disclaimer: Subject to change, prior sale, and errors excepted. Further pictures and videos available on our homepage. Our comprehensive services include, for example: * Purchase/sale/rental of commercial vehicles * Fast and uncomplicated financing options * Application for all (export) documents * Order of export/license plates / customs plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration service * Delivery/transport of commercial vehicles Contact our trained specialist staff, we are happy to advise you.

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Isdefy T Arspfx Adweht Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. Ihjdpeflq Spsfx Adwot The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. Iedefz Dt Njpfx Adwoht This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Ihedpfxefz I D Do Adwet Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.