Used Spin Wheel Shot Blasting Machine for sale (1,10,599)

Condition: new, Year of construction: 2025, Dump belt blast wheel blast machine 11 kW direct drive indexing turbine with 8 throwing blades. Belt width 1000mm and Ø900mm Hfedpshvikusfx Aaben

Condition: new, Year of construction: 2025, Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels Questions about technical specifications, etc. contact us in writing or by telephone. Hodjdtq Anopfx Aabjfn Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ Hfsdpfju Nu Nkjx Aaben total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *

Year of construction: 2025, condition: new, Drum Shot Blasting Machine; The system consists of a Cabin, Turbine System, Recycling System, Filtration System, Control Panel, Platform, Hydraulic Loading-Unloading Unit, and Vibrating Screen. Shot blasting is performed by having a rubber belt wound over three drums rotate the virtual barrel-shaped chamber while the turbine propels steel shot onto the workpieces. Hedsvliucspfx Aabjfn The blasting cabin is manufactured from ST-37 steel plate. Areas directly targeted by turbines (hot points) are reinforced with manganese wear-resistant plates, while other areas are supported with Hardox plates. (Complete manganese plate cladding is optional.) Wear-resistant claddings are designed with bolts to facilitate future part replacements due to wear. Replacement can easily be carried out by your company's authorized personnel. The wear-resistant plates are bolted for easy future servicing. Dimensions of the TK - 6 PREMIUM machine: Drum diameter Ø: 1000 mm, Length between discs L: 1200 mm, with a loading capacity of 800 kg. Turbine specifications: 2 x F300 model Ø 320 mm, 7.5 kW motors. Equipped with a rubber belt conveyor.

Condition: new, Year of construction: 2025, We offer a new table blasting machine – high-quality Czech production, made using premium materials. Model – TS 330/1. - Diameter of rotary table – 1000 mm. Hedpfowt T Uzox Aabsfn - Maximum height of blasted part – 550 mm. - Overall machine height – 2750 mm. - 1 blasting wheel – power input – 5.5 kW. - Bucket elevator – power input – 0.75 kW. - Table rotation – power input – 0.75 kW - Total machine power input – 7 kW. We also manufacture table blast machines with table diameter – 1500 mm. Equipment with frequency inverter – regulating the rotation speed of the blasting wheel. A major advantage of the machine is the ability to change the turbine’s rotation direction to right or left. Blasting equipment comes with CE certification. Further advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, thanks to its design, this table blast machine can be considered highly advanced. (Sandblaster, sand blasting, shot blasting, sandblasting machine, blasting machine, blast cleaner). Blast machine.

Condition: used, functionality: fully functional, compressed air connection: 4 bar, inner dimension width: 800 mm, inner dimension length: 800 mm, inner dimension height: 1,200 mm, workpiece weight (max.): 500 kg, For sale: used overhead rail shot blasting machine from manufacturer Berger. Good used condition appropriate for its age. 2 blast wheels, connected load approx. 30 kW. Internal lining made of manganese steel. Bucket elevator belt has been replaced. Central lubrication. Circuit diagram and operating manual available. Machine can be inspected under power at location, 66802 Überherrn. Hodowphb Uopfx Aabsfn

Year of construction: 1995, condition: excellent (used), MONORAIL HANGER SHOT BLASTING MACHINE WITH WETFILTER Designation: Monorail Hanger Shot Blaster Brand : Schlick Type: DHB 12/14 Workpieces ø: 1.200mm Workpieces High max.: 1.400mm Charge max. kg: 500kg Hodsd Hp Sqepfx Aabsfn Shot Wheel: 3 Pieces with 7,5kw with Drivers Consisting of: - Monorail Hanger Shot Blaster Typ: DHB 12/14 - O-Hanger System with Workpieceshangers - Main Panel - Wet Filter Wir bieten auch Ersatzteile für Rösler, Schlick, Wheelabrator, Gietart usw. Strahlanlagen an! We can offert for spare Parts for Rösler, Shot Blasting Machines!

Year of construction: 2001, condition: ready for operation (used), Shot Blasting Machine, PARTICLE BLASTING MACHINE, Shot Blaster Units, , Schlick Particle Blasting, Roto-jet, Used Machine Manufacturer: USF SCHLICK, Heinrich Schlick Model: Roto-Jet, 24/23457 Year: 2001 Installation dimensions: 4560 x 3920 x 5080 mm Electrical Cabinet, PLC: - Siemens S7 1200 - Servomotor Controller 2 - Siemens Simatic HMI Display - 400 V ; 20 A Particle Blasting Chamber: Equipped with a servomotor, which synchronously drives the rotating table and the screw conveyor. Another servomotor provides the vertical movement of the particle sprayers. The chamber is lined and has doors that can be opened from multiple sides, with one side having a lifting opening. Table size: 900 mm in diameter. Maximum object size that can be placed: 1000 mm x 1000 mm in diameter Extraction System: Ensures the extraction of dust resulting from spraying, which it can perform in its own airspace. Equipped with bag filters on the exhaust side and cartridge filters on the extraction and dust separation side. Hjdpfxork D Tne Aabjfn Cup-type Distributor and Particle Sprayer Tank: The cup-type distributor transports the shot to a collector after the screw dispenser, which has a 3-stage filter for cleaning the particles (vibrating filter). The tank has outlets where the dosage of particle spraying can be regulated. - It is possible to connect to 10 adjustable particle spraying points. - Currently, 5 particle spraying points are connected.

Condition: excellent (used), Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs -Spare and wear parts: for shot peening system continuous blasting system -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete Hsdpfswaiv Uex Aabofn -Total weight: 452.4 kg

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. (Quantity x Diameter): Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades Hfjdpfxjvkf Ago Aaben The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. The cabinet door has a lock system to prevent it from being opened during the blasting process. In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 27324-1/1, input voltage: 400 V, Shot Blasting Machine Parts Three new Gostol tst turbines for shot blasting machines/surface treatment of metal elements. Hodpfxewrp Nfj Aabsfn

Condition: new, Year of construction: 2025, Dump belt blast wheel blast machine 7,5 kW direct driven indexing turbine with 8 throwing blades. Belt width 700mm and Ø600mm Hfedpfog S Rt Ejx Aaben

Condition: new, Product description: Hodegha A Sspfx Aabofn Casting, forging, pressing, heat treatment, finished product, semi-finished product, steel fabrication etc. It is preferred for surface cleaning, pre-coating preparation or revision works. Its distinct advantages are that it enables versatile sandblasting, and that large and small parts with irregular geometry can be sandblasted. With the help of the digital clock we use in our machines, the sandblasting time can be adjusted according to the part type and desired sandblasting surface. Casting sandblasting, forging sandblasting, press - heat treatment workpieces sandblasting, finished product sandblasting, semi-finished sandblasting, steel fabrication sandblasting, etc. used in transactions. The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. It can be designed as a continuous system upon request and can be included in the paint line.

Condition: ready for operation (used), total width: 3,000 mm, total height: 5,350 mm, total length: 15,000 mm, empty load weight: 20,000 kg, Rollenbaan type G met Titan straalwielen Voor profielen, platen, rollen, buizen... maximale ingangsbreedte: 1100 mm maximale instaphoogte: 550 mm Hfedpfx Aaswikatsben 4 turbines, elk 11 kW werksnelheid: 1,4 2,4 m/min Totaal vermogen: 62 kW Wordt op de vloer geïnstalleerd, geen fundering nodig! Inclusief een grote keuze aan nieuwe reserveonderdelen ter waarde van meer dan 80.000€!

Condition: new, Year of construction: 2025, You can call us 24/7 for bucket sand washing machines for sale. As CONSTMACH, get ready to embark on a journey to increase productivity and quality in your industry with our CKY series bucket sand washers. Our CKY-80 and CKY-100 models are designed to meet your high performance and durability requirements. Our CKY-80 model offers a sand washing capacity of 80-90 m³ per hour with 5.5 kW engine power, while our CKY-100 model provides a capacity of 110-120 m³ per hour with 7.5 kW engine power. In both models, 800x550 mm and 1.000x550 mm bucket sizes maximise functionality, while 40 buckets and 3.000 mm diameter wheels ensure superior performance even in the toughest conditions. With a 2.5 rpm rotation speed, these machines offer efficiency and energy saving and will be one of the cornerstones of your sand production facilities. Achieve high quality and optimum efficiency in your sand washing processes with the CONSTMACH CKY series. These machines offer solutions for all your sand and gravel washing needs and play a major role in speeding up your business processes and minimising your costs. These long-lasting and low-maintenance products add value to your investment while supporting your sustainable production practices. The CKY series helps you make a difference in your sand production facilities by offering you power and flexibility at every stage of your business. CKY-80 Model Technical Specifications: Engine Power: 5.5 kW Capacity 80 - 90 m³/hour Bucket Size: 800 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets 40 Ctdkj9Uxki CKY-100 Model Technical Specifications: Engine Power: 7.5 kW Capacity 110 - 120 m³/hour Hsdpfx Aajuf Dghjbefn Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets 40

Condition: new, Year of construction: 2024, functionality: fully functional, SY-ZP4A Rotary disc precision sand Hodpfjwcfvpox Aabsfn Dry blasting machine year 2024

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. Hodpfxeq Nf S Ro Aabsfn 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: excellent (used), functionality: fully functional, Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg Hodpewdwv Rjfx Aabefn

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine Hfodpehmi Ucjfx Aabsn This is a combo machine pelletizer and sandblasting machine (two in one) very low operation hours

Condition: used, Year of construction: 2016, through-put width 1000 mm working heigth 500 mm bending speed 0,9-2,5 m/min Hfsdpfxow Ny Sqs Aabon

Condition: used, Gietart Roller conveyor shotblasting machine Hfedsidlq Sspfx Aaben Type: Roller conveyor Max. width of workpiece: 1500 mm Max. height of workpiece: 550 mm Max. workpiece weight: 600-800 kg/m

Year of construction: 2019, operating hours: 325 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: BL 6000000, TRIVENTEK BL60 DRY ICE BLASTING MACHINE Includes 6 m blast hose + ice gun (applicator). Nozzle box and special ice splitter nozzle included. 325 operating hours Machine in good condition, immediately ready for use. Worldwide Shipping. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale Dryice blaster for sale buy dry ice blasting machine Dry ice blasting machine – dry ice blasting | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Hfsdpfx Aajxnl Akjben Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale Dry ice blasting machines Cold Jet various models Servicing and repair of Cold Jet dry ice machines

Condition: used, We offer a table shot blasting machine - Škoda TMSO 2.4/5. The machine is equipped with two rotary work tables. Size of each table - diameter 1000 mm. Maximum workpiece size per table - diameter 1000 mm, height 500 mm. Turbine diameter is 320 mm. Turbine power - 11 kW. Filtration units - 2 units - each with power consumption of 2200 W. Total connected load of the machine - 23 kW. Hfodpoxnwz Sjfx Aabjn

Condition: used, grinding wheel weight max. 20 kg grinding wheel diameter 320 mm grinding wheel width max. 140 mm range L-W-H 0,41 x 0,27 x 0,36 mm weight 4,9 / 9,7 kg balancing scales Hofmann NG-1, Test pin length 178 mm, spigot 15 mm diameter. Hedpjw T Tvwofx Aabjfn Machine dealer with own stock of 1600 m² and certification of the database "Machineseeker".

Year of construction: 1996, condition: excellent (used), TUBE BLASTING MACHINE.Machine is used to clean the inner surface of the copper tube in a continuous process of blasting. Hsdpfx Aaepmtb Rjbofn