Used Spot Welder Tongs for sale (2,049)

Condition: new, Year of construction: 2025, throat depth: 500 mm, – Capacity 35 kVA – Pneumatic – Throat depth 500 mm – PX1700ECO control Kodsx N Nfujpfx Afusdn – Documentation – 400V

Condition: used, Year of construction: 1980, pressure:24 t table length:1060 mm table width:650 mm Kjdpfxeufufbj Afusdn Smallest opening:165 dimensions of the machine ca.:1300 x 700 x 1500 mm This Millutensil die spotting / tryout press has a capacity of 24 tons, this machine you can use for die en mould spotting press. This kind of machines are used for splitting, adjusting, maintenance and try-out operations on dies and moulds. This machine is produces by Millutensil s.r.l. in Italien.

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm contact pressure capacity 17 - 235 daN horn spacing 140 mm mm rated capacity 8,0 kVA voltage 380 V Kdjdpfey Ty Dcox Afusn total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2

Condition: used, total power requirement:6,5 kW dimensions of the machine ca.:0,9 x 0,5 x 1,25 m Kjdscxxp Uspfx Afusdn

Condition: used, Year of construction: 1992, machine/vehicle number: 920544, current capacity:100 kVA throat:280 mm capacity at 50%:100 kVA pressure:1,1 t stroke:100 mm table-size:180 x 170 mm control:MPS-29-K-S-R total power requirement:279 kW Kjdpfocxxwnex Afujdn weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,15 x 2,1 m spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off

Year of construction: 2018, condition: good (used), Fully automatic angle welding machine / Fully automatic side welding machine Manufacturer: Diez Type: AWS-C 9070 CS Year of manufacture: 2018 Kdjdetzcd Sspfx Afuen Shrink tunnel Manufacturer: Diez Type: HTC 122-40D Year of manufacture: 2018 Control side: Left, in the direction of travel Passage width: approx. 600 mm Passage height: approx. 190 mm Welding length: approx. 900 mm Working height / belt height infeed/outfeed: approx. 860 mm + 100 Performance: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230V AC, 50Hz, 1 phase + N + PE Power consumption: 3.5 KW Rated current: 10 A With cable and 16A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm 3626

Year of construction: 2024, condition: new, Parameter: JSW-3000 Laser power: 3000W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity%: 10 - 90% Positioning: laser pointer (red dot or line) Protective gas: Nitrogen / Argon / Oxygen Power supply: 3-phase 380V 50/60 HZ Maximum total energy consumption: 24.6KVA/37.4A Average energy consumption: 14.7KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 195kg Machine dimensions: Height: 1050mm, Width: 530mm, Length: 1240mm. Material processing capabilities for JSW 3000W welding function. Material: Stainless steel 0.5 - 8mm Carbon steel 0.5 - 8mm Galvanized sheet metal 0.5 - 8mm Aluminum 0.5 - 6mm Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles - Spare safety glasses Kdsdpfotwz Nmjx Afujn - Safety glasses OD6+ - Welding mask OD8+ - Warranty 24 months

Year of construction: 2024, condition: new, Parameter: JSW-1500 Laser power: 1500W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity:%: 10 - 90% Positioning: laser pointer (red dot or line) Protective gas: nitrogen / argon / oxygen Power supply: 1-phase 220V 50/60 HZ Maximum total power consumption: 8.2KVA/37.3A Average power consumption: 4.9KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 175kg Machine dimensions: Height 800mm, Width 540mm, Length 900mm. Material processing capabilities for the JSW 1500W welding function. Material: Stainless steel 0.5 - 5mm Carbon steel 0.5 - 5mm Galvanized sheet metal 0.5 - 5mm Aluminum 0.5 - 4mm Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles - Spare safety glasses Kdedpfxetwzhvo Afuen - Safety glasses OD6+ - Welding mask OD8+ - Warranty 24 months

Year of construction: 2024, condition: new, Parameter: JSW-2000 Laser power: 2000W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity%: 10 - 90% Positioning: laser pointer (red dot or line) Protective gas: Nitrogen / Argon / Oxygen Power supply: 1-phase 220V 50/60 HZ Maximum total energy consumption: 10.6KVA/48.3A Average power consumption: 6.4KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 175kg Kdedpfx Aotwzxuofuen Machine dimensions: Height 800mm, Width 540mm, Length 900mm. Material processing capabilities for the JSW 1500W welding function. Material: Stainless steel 0.5 - 6mm Carbon steel 0.5 - 6mm Galvanized sheet metal 0.5 - 6mm Aluminum 0.5 - 5mm Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles - Spare safety glasses - OD6+ safety glasses - Welding mask OD8+ - Warranty 24 months

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots Kedpfov Dxm Sex Afusdn - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch Kjdpfx Aehpf Iyofuedn - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage Kdjdpoycv Sasfx Afujn - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Kodpfxjdzp Tce Afujdn Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Year of construction: 2004, functionality: fully functional, working width: 1,700 mm, wire diameter (max.): 6 mm, type of input current: three-phase, Basic Information Number: 13921 Control System: Siemens S7-400 Technical Details Materials processed to date: bare and galvanized wires Intended use: Production of fencing and industrial mats Technical condition: The system was in production until January 5, 2026, disassembled and stored Longitudinal wire diameter min: 2 mm Longitudinal wire diameter max: 6 mm Transverse wire diameter min: 2 mm Transverse wire diameter max: 6 mm Cycles (transverse wires) min/max: 120 Maximum mat width: 1700 mm Longitudinal wire feed: pre-aligned rods Transverse wire feed: pre-aligned rods Longitudinal wire spacing min: 25 mm Transverse wire spacing min: 12.5 mm Transverse wire spacing max: 1500 mm Number of welding transformers: 8 Number of welding presses: 41 Maximum welding width: 1600 mm Kdsdpfxezb Nx Rj Afuen Maximum mat length: 3000 mm Mat cutting shear: present Mat stacker: present Transverse wire magazine: present Drive power: 122 kVA Total connection power: 900 kVA Operating voltage: 3x400 V Frequency: 50 Hz Control voltage: 230 / 24 V Electrical cabinet: present Additional data: The system consists of: GRID WELDING MACHINE IM-QC/72 Longitudinal wire MAGAZINE Longitudinal wire DISTRIBUTOR Longitudinal wire FEEDING MACHINE IM-ZL/72 Strip and EDGING MACHINE Q 5H/72 MAT CUTTING SHEAR L 1/72 MAT TRANSPORTER LT-PV/72 MAT STACKER SHR/72

Year of construction: 2025, condition: new, functionality: fully functional, working width: 2,400 mm, wire diameter (max.): 8 mm, mesh size: 6,000 mm, welding power (max.): 900 kVA, Double cross wire mesh welder VM-15/25-1000NC-UD-2C Technical characteristics - power: 14 x 63 kVA - drawing motors: 155 kW - el. voltage: 3 x 400 VAC - controlled by: PC - wire mesh dimension: 6000 x 2000 mm - wire diameter: 4-8 mm/6-10 mm - distance between line wires 150 mm and 200 mm - distance between cross wires from 150 to 200 mm - working speed 180 cross wires/min - machine dimension: 55 x 11 x 4 mm - machine is operated by two workers Kedpfjuv Eg Hex Afujdn

Condition: used, Year of construction: 1988, pressure 70 t distance between columns 750 mm stroke 900 mm table surface area 700 x 1000 mm Kodpfx Asvuumpefuedn Distance table/ram, stroke up 900 mm table height over floor 680 mm ram surface 700 x 1000 mm side window 600 mm max. tool weight 5,0 t max. capacity of swivelling ram plate 2,0 t Speed down 0 - 50 mm/s Speed up 0 - 48 mm/s Working speed 0 - 8 mm/s oil volume 140 l power capacity 9,5 kW weight 8,0 t Dimensions (WxDxH) 2,2 x 1,2 x 3,7 m with swivelling ram, movable table, ejector in table

Condition: used, Year of construction: 1985, pressure 100 t distance between columns 1250 mm stroke 1035 mm table surface area 890 x 1280 mm distance table/ram, max. stroke up, adjustment up 1035 mm table height over floor 630 mm ram surface 1000 x 1200 mm side window 700 mm max. tool weight 7 t max. capacity of swivelling ram plate 3,5 t oil volume 180 l power capacity 9,0 kW weight 11,0 t Dimensions (WxDxH) 2,1 x 3,8 x 3,9 m with swivelling ram, movable table, inclining table, ejector in table, hydraulic ram interlocking Ksdpfevuumcjx Afuedn

Condition: used, Year of construction: 1991, pressure 40 t distance between columns 930 mm stroke 1100 mm distance table/ram, max. stroke up, adjustment up 1035 mm table surface area 900 x 1280 mm table height over floor 665 mm ram surface 900 x 1200 mm Kedpsvuul Sefx Afuodn side window 700 mm max. tool weight 7,0 t max. capacity of swivelling ram plate 3,5 t Speed down 0 - 50 mm/s Speed up 0 - 34 mm/s Working speed 0 - 10 mm/s oil volume 140 l power requirement 9,5 kW weight 7,0 t dimensions (WxDxH) 2,1 x 3,6 x 3,6 m with swivelling ram, movable table

Year of construction: 2021, operating hours: 227 h, condition: excellent (used), functionality: fully functional, The HF machine was used for welding PVC tarpaulins. Maximum welding area: 4 cm x 100 cm. Current welding stamp sizes: 2 cm x 100 cm and 2 cm x 50 cm, in use since 02/2022. Kjdpfx Ajzbb Tmefusdn

Year of construction: 2019, condition: used, overall weight: 1,400 kg, load center: 600 mm, load capacity: 12,000 kg, working range: 2,200 mm, machine/vehicle number: 449297, Hersteller: Durwen Typ: 805.5122-12.01 Aufnahme: Pin-Type / Direktmontage Internationaler Transport möglich/ International delivery available Kdjdpexw I E Hefx Afusn Bauart: Ballenklammer mit Seitenschub Baujahr: Abmessungen: • Gesamtbreite: 2240 mm • Bauhöhe ohne Gitter: 930 mm • Gesamthöhe mit Gitter: 1200 mm • Innenmaß zwischen Trägern: 530 mm Öffnungsbreite: • min: 200 mm • max: 2200 mm Kapazität / Leistung: • Tragkraft: 12000 kg • Lastschwerpunkt: 600 mm Gewichte: • Eigengewicht: 1400 kg • Vorbaumaß: 450 mm Ausstattung: • Seitenschub vorhanden • Hydraulik komplett funktionsfähig • Klammerarme Heavy-Duty Ausführung

Year of construction: 2022, condition: new, Pressure: 400 t table length: 3000 mm table width: 2000 mm table load max .: 50 t Kodpfjfn Efpjx Afujdn distance between the work tables : min. 400 / max. 2800 mm top tool foldable: 180 degrees Dimensions L x W x H: 7600 × 5670 × 7850 mm Total weight (without operating materials): 85 t Motor power: 44 kW

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: SC7.3 - 321ESE00139, cooling capacity: 7.32 kW (9.95 HP), type of input current: AC, type of cooling: air, overall weight: 90 kg, ambient temperature (max.): 31 °C, ambient temperature (min.): 1 °C, input voltage: 230 V, total width: 600 mm, total length: 490 mm, total height: 1,303 mm, warranty duration: 3 months, Equipment: type plate available, MTA Spotcooler SC7.3 Manufacturer: THERMOBILE INDUSTRIES BV Type: Coolmobile 25 (Industrial version) Mobile spot cooler Coolmobile 25 for targeted cooling of, for example, materials, cooling tunnels, room areas, and heat sources. The spot cooler is mobile on wheels and can be easily moved to the location to be cooled. The control panel has an adjustment range of +1°C to +31°C and can be automatically switched on and off via a timer. Thanks to a Schuko plug (230V / 50Hz), the unit can be used anywhere. Cold air can be distributed via three flexible hose nozzles. Hot air can be discharged via a flange and hot air hose (both not included). Technical data: Cooling capacity / Kw 7.32 (25,000 Btu) Airflow m/hr 10.5 - 8.5 Power connection / V / Hz 230 / 50 Starting current / A 57 Operating current / A 13 Power consumption / Kw 2.6 Air filter Aluminum and carbon Max. static pressure / mm 30 WG ΔT °C 10 - 15 Room size max. / m2 58 Ksdpfxjw Drtqj Afuodn Dimensions (W x H x D) / mm 490 x 1303 x 600 Weight / kg 90 Outlet 3 x 125 mm Max. hose length / m 12 Connection cable / m 3 Refrigerant R407C (1.2 kg) Dimensions (mm) L x W x H 490 x 600 x 1303 Weight (kg) 90 Serial No.: 321ESE00139 Year of manufacture: 2019 Condition: Visually 2, Technically OK Used Used machines may have optical defects due to their use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Kdsdpfoulwzmox Afuon Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Dimensions (estimation) length 4800 mm width 5600 mm height 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2002, Manufacturer: Millutensil Type: MIL 203 Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Kdodpfx Afswpkv Ijuon Pressure 0 - 250 Bar T Size T-22 Opening force 35 Ton Closing force 150 Ton Distance between columns 2130 mm Table height above floor 770 mm Upper table rotation 180 degrees Specifications Metric US Standard Capacity 30000 Distance between the columns 2130 mm Table length 2000 mm Table width 1500 mm Table height 1500 mm Run-in speed 3900 - 4800 mm/min. Working speed 480 mm/min. Return speed 2100 - 3000 mm/min. Dimensions (approximate) Length 6150 mm Width 3500 mm Height 4800 mm Weight 28000 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details.

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Kdedpfx Ajrr Ui Refuon Table length 755 x 755 mm ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm weight 1500 kg