Used Spotting Ruler for sale (2,245)

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Dcodpjdzp Tcsfx Afpjc Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Spot projection welding machine NIMAK type PMP 5 / 35 Spot welding machine, projection welding machine Make No. 88100 Year of construction approx. 1988 power at 50% ED 35 kVA throat 250 - 450 mm working stroke 40 mm electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insert electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of electrode holder 200 mm Connected load 83 KVA Mains connection 380 Volt, 50 Hz - 4-time control - stepless power adjustment - single points and series points - bouncing electrode guide - water cooled (without cooling unit) Dsdpfshubgzox Afpscc - electrical foot switch space requirement L x W x H 1200 x 650 x 1500 mm weight 300 kg good condition

Condition: good (used), Length: 1000 mm Dcedpjf D Sp Sefx Afpjc Width: 600 mm Plate height including ribbing: 135 mm Plate edge height: 35 mm Weight: 152 kg

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm spark plug air gap: 330 - 500 mm Djdpfoz H Dyex Afpocc electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg

Year of construction: 1973, condition: good (used), machine/vehicle number: 699, pressure power: 40 t table size: 670 x 470 mm tappet area: 670 x 470 mm passage between columns: 620/470 mm max. mounting height: 740 mm pressure speed: 20 mm/s rapid move: 50 mm ejector power: 3 t electrical connection: 380 V, 9,5 kW space needed: 2200 x 1875 x 3000 mm weight: 2400 kg Djdpfjy Dpbsx Afpecc

Condition: used, machine/vehicle number: 4229, nominal capacity: 12,5 kVA throat: 350 - 500 mm spark plug air gap: 120 mm Dcsdpfobh Nxrsx Afpec welding capacity steel: 8 mm electrical connection: 380 V kW space needed: 400 x 1000 x 1150 mm weight: ca. 190 kg

Condition: used, plate size: 755 x 373 mm Dcodpfxjb Npd Uo Afpjc plate thickness: 115 mm

Condition: good (used), Year of construction: 1995, Rated power: 63 kVA Thrust: 520 mm Electrode arm distance: 200 mm Welding capacity for steel: approx. 7 + 7 mm Welding capacity for non-ferrous metals: approx. 2 + 2 mm Dcjdpfx Afowurw Rjpjc Electrical connection: 380 V kW

Condition: excellent (used), Water-cooled, pneumatically operated rocker arm spot welding machine Manufacturer: DALEX Model: SL 25-1 Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 22.4 kA Secondary open-circuit voltage: 1.8 - 5.2 V Electrode force: 278 daN Arm gap: 140 or 300 mm Arm reach: 180-500 mm With attached control cabinet according to VDE 0100 Dsdpfx Ajxvh Hbsfpecc With main switch Synchronous welding control MPS 15036

Condition: used, Year of construction: 1980, pressure 40 t table length 670 mm table width 570 mm total power requirement kW weight of the machine ca. t Dcsdpfx Ast Hxczefpsc dimensions of the machine ca. m

Condition: used, Year of construction: 1995, pressure 80 t table length 1.200 mm table width 1.000 mm Dedpfx Aevbwitofpjcc 250 mm 1.200 mm max. table load 7.000 kg distance between columns 1.100 mm voltage 400 V weight of the machine ca. 11,0 t dimensions of the machine ca. 4,40 x 2,58 x 3,66 m - Serial No.: 760/12312 Dimensions of upper and lower plate: 1.200×1.000 mm. Press upper plate is tilting by 150° Lower plate tilting by ±70° at front/back side The press is equipped with: - 2 energy accumulators in order to better gauge the adjustment of the mould halves - an automatic wax injection unit to check quality of pre-production mouldings - hydraulic ejection unit on lower plate

Year of construction: 1970, condition: used, Spot welding machine Dodpsk Tt Hfofx Afpocc Make Dalex type SF 16 Continuous power 16 KVA at 50 % ED

Condition: used, current capacity max 114 kVA throat 550 mm contact pressure capacity . kp weight of the machine ca. 290 kg Dcedpfxjw Nrvno Afpoc Little used, in good condition, comes from a public institution including water cooling unit

Condition: good (used), Max. welding power 20 kVA Short circuit power 25 kVA Nominal power at 50 % ED 10 kVA Throat 500 mm Max. Secondary short circuit current 10 KA Connected load 15 kVA Dimensions W x D x H 400 x 1100 x 1150 mm Weight 200 kg Accessories / Special features: - Water cooling by external connection - Adjustable current time 0 - 10 - Adjustable electrode force by adjusting the spring Dcedpsfi Tl Hjfx Afpec - Mechanical foot switch Note / Reference value: With a max. secondary short-circuit current of 10 KA, a max. sheet thickness (normal sheet) of 2.5 mm can be welded. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: excellent (used), Pneumatically operated, water-cooled spot welding gun Make: DALEX Model: 3328-6 Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 22.5 kA Secondary open-circuit voltage: 4.75 V Electrode force: 600 daN Special version with arm spacing: 248 mm With double-stroke cylinder – long stroke 51 mm – pre-stroke 33 mm – working stroke 0–18 mm with stroke adjustment With cardan suspension and suspension bracket Djdpfx Afjvurw Ejpjcc Connection cable: 10 m Throat depth: 350 mm Synchronous welding controller MPS 1536

Condition: good (used), Medium frequency 1000 Hz spot welding machine, 400 V 50 Hz Make: DALEX Model: PMS 11-4 MF Arm reach: 950 mm Djdpfx Afjvyk Sfspocc with double-acting cylinder Rated power at 20% duty cycle: 180 kVA Secondary short-circuit current: 37 kA Secondary open-circuit voltage: 9 V Electrode force: 60-600 daN Weight: 550 kg

Condition: good (used), Year of construction: 2002, Manufacturer: Millutensil Type: MIL 203 Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Pressure 0 - 250 Bar T Size T-22 Opening force 35 Ton Closing force 150 Ton Distance between columns 2130 mm Table height above floor 770 mm Upper table rotation 180 degrees Specifications Metric US Standard Capacity 30000 Distance between the columns 2130 mm Table length 2000 mm Table width 1500 mm Table height 1500 mm Run-in speed 3900 - 4800 mm/min. Working speed 480 mm/min. Return speed 2100 - 3000 mm/min. Dsdpfxewpkv Ie Afpecc Dimensions (approximate) Length 6150 mm Width 3500 mm Height 4800 mm Weight 28000 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details.

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm Dodpfxsrr Ui Rs Afpjcc weight 1500 kg

Condition: good (used), overall weight: 560 kg, Marking plate / marking table / surface plate / 1195x1000x160(35) mm -KOM 493- Offered here is a very heavy-duty marking plate or surface plate with the corresponding legs. Dimensions: 1195 x 1000 x 160 (35) mm Total weight: approx. 580 kg (incl. pallet) Weight per machine leg: approx. 42 kg Surface plate weight: approx. 392 kg Dcodpfxexrb N Us Afpec The marking plate has a working height of 791 mm. The height of the legs is variable.

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine type PMS 11-4 G3 in 3-phase DC version - Specifically designed for welding aluminum sheets - Low usage, completely checked and cleaned - Fully functional, ready for demonstration - Rated voltage 400V/50Hz - Rated power 96 kVA - Welding current 23 kA - Connection cable cross-section 10 mm²/phase - Fuse protection 63A - Throat depth 1050 mm (!!) - Electrode arm diameter 60 mm - Electrode holder diameter 30 mm - Electrode force 600 daN - Stroke 65+25 mm Dcedpeh N Sc Ejfx Afpoc - Electrode taper MK2 - MPS 8043/1 control unit from Harms & Wende with current rise and pulse function – operating manual included - 2-stage foot switch according to regulations (UVV) - Main machine switch - Pneumatic service unit - Weight approx. 830 kg - Complete documentation available: wiring diagram, compressed air diagram, and cooling-water circuit - VAT deductible - Delivery ex stock Dresden approx. 4 days within Germany – export may take longer! On-site commissioning available for a fee, billing based on actual effort. The unit is located in Dresden, near the A17 motorway, and can be inspected and demonstrated by appointment.

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage Dedpfxexrb Tgj Afpscc - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Year of construction: 2011, condition: ready for operation (used), System includes (1) Industrial Robot KUKA KR 150-2 2000 (2) Spot Welding System SPATZ (3) Camera Inspection OMRON (4) Light Barrier SICK, operational hours counter: 2602h. Dodpfx Ajgqkpmofpscc

Year of construction: 2000, condition: ready for operation (used), Arm length: 550mm, max. welding power: 136kVA, length: 640mm, width: 930mm, height: 1550mm, weight: 290kg. Dodpfx Aok N Dmvjfpecc

Condition: used, continuous power (apparent): 50 kVA, short-circuit current: 31 A, input voltage: 380 V, overall weight: 420 kg, welding power (max.): 126 kVA, Dear Sir or Madam, Below we offer you a DALEX spot welding machine "PMS 10-4", used and in very good condition. Technical data and dimensions: errors excepted. Prices are quoted: plus VAT ex stock, loaded free truck. Delivery time: immediately available from stock, subject to prior sale. Djdswtr Exspfx Afpjcc Payment: advance payment. For further details, see PDF.

Condition: refurbished (used), Power at 50%: 20kVA Short circuit-current: 19kA Dodpfx Afoxl U Auepscc Electrode force: 187daN / single stroke Throat depth: 160mm --- Weld control: TE 91 (12-times, 2-program) --- Warranty: 12 months --- Spotwelding electrodes + spare parts at stock