Used Sine Wave Ruler for sale (408)

Condition: refurbished (used), Year of construction: 2024, operating hours: 250 h, functionality: fully functional, machine/vehicle number: 325, type of input current: three-phase, total length: 1,300 mm, year of last overhaul: 2026, working width: 900 mm, tank capacity: 60 l, total width: 400 mm, total height: 1,200 mm, overall weight: 550 kg, This is an older version of the FD440 with a tray height of 33 mm (new machines are 50 mm). The machine is fully overhauled. The new model's price is 36,900 EUR. The machine comes with a 28m3 oil rotary vacuum pump from Edwards. Extraction capacity: 60 kg Chsdeyut Hrjpfx Ab Uea The new model can be found here.

Year of construction: 2025, operating hours: 150 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 103, This is prototype of the 570 series model, it has been completely refurbished. It has 96 trays at 60x40 cm and full temperature control on each tray. It has an extraction capacity of 25kg/hr. The machine will be delivered and mounted on location including one week of introduction by out technician. Chjdoyut Hxopfx Ab Usa

Condition: excellent (used), Length of travel: 1 m Serial number: 1117445 Year of production: 2012 Weight: 1700 kg Codpfsvncmqox Ab Uoha Universal without synchronization

Condition: excellent (used), Travel length: 3 m Serial number: 1117489 Year of production: 2012 Weight: 2800 kg Cjdpevncm Djfx Ab Usha For FANUC robot

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 275 h, load capacity: 135 kg, lifting height: 2,997 mm, fuel type: electric, mast type: telescopic, construction height: 1,385 mm, empty load weight: 640 kg, total length: 1,525 mm, drive type: Elektro, construction width: 750 mm, Medium-lift order picker Mast type: Telescopic Condition: Ready for operation and fully functional Chodpfx Aezrcwyob Usa Technical condition: Good Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 24V Battery capacity: 205Ah Bypass for lift/lower cut-off: No bypass for lift/lower. Drive/lift signal: All warning signals present. Bumper: Bumper with rubber protection. Storage compartment on the right side. Loading platform manually adjustable: 540 x 685 mm. Flashing light: Front & rear. Storage compartment. Operator login code: Access 123. German labels. Operating manual: German. Paintwork: Orange. Battery: 205 Ah, maintenance-free. Charger: 30 Amp, 85-265 VAC, with cable, IEC socket, with CEE 7/7 plug.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 305 h, load capacity: 135 kg, lifting height: 2,997 mm, fuel type: electric, mast type: telescopic, construction height: 1,385 mm, empty load weight: 640 kg, total length: 1,525 mm, drive type: Elektro, construction width: 750 mm, Medium-lift order picker Mast type: Telescopic Condition: Ready for use and fully operational Technical condition: Good Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 24V Battery capacity: 210Ah Battery manufacturer: Lithium-ion Cedpfx Aezrccpsb Ueha Battery year: 2023 Bypass for lift/lowering cut-off: No bypass for lift/lowering Drive/lift signal: All warning signals Bumper: Bumper with rubber protection Storage compartment on right side Load platform: manually adjustable, 540 x 685 mm Flashing beacon: front & rear Operator compartment Operator login code: Access 123 German labeling Operating manual: German Paintwork: Orange Battery: 205 Ah maintenance-free Charger: 30 Amp 85-265 VAC with cable, IEC socket, with CEE 7/7 plug

Condition: excellent (used), Sinus magnetic clamping plate, 380x150 mm, sine table/angle table Manufacturer: Binder Magnete Type: 0011817C1 In very good condition. Codpfx Ajzhrffeb Usha

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE Chjdpfx Ajy N Rlvsb Uja The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: used, Spotting ruler, dressing ruler, test ruler, straightening ruler, straightening bar -Spotting ruler: 60° -Ruler length: 2015 mm Chodpfx Abefbyc Do Usa -Dimensions: 2275/120/H105 mm -Weight: 90 kg

Condition: good (used), Marking ruler, planing ruler, test ruler, straightening ruler, straightening beam, clamping plate, marking-spotting plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, precision measuring table -Inking ruler: 145 x 1515 mm -Dimensions: 145/1515/H265 mm Chsdpjw H Nu Dsfx Ab Usa -Weight: 99 kg

Condition: used, steel ruler -Manufacturer: Hoffmann, precision steel ruler, stainless steel, length 2000 mm .: 461400 2000 -Dimension 2040/30/1 mm Cedpfx Asuz H T Sjb Ueha -Weight: 0.5 kg

Condition: good (used), Shaft, axle shaft, spindle shaft, axle bolt -Shaft: axle shaft spindle shaft -Type: Shaft Ø 30/40/45 mm -Dimensions: see photos Cedpfx Aewq Ipbob Ueha -Total dimensions: Ø 65 x 135 mm -Weight: 1.2 kg

Year of construction: 2017, operating hours: 800 h, condition: like new (used), functionality: fully functional, working width: 250 mm, For sale is a very compact and flexible twin-wave soldering machine, type ATF 13/25, from the German quality manufacturer ATF Automatisierungstechnik GmbH (Collenberg). Solder quantity: approx. 120 kg, filled with Felder SN100Ni+ Very compact soldering machine, can be operated in an office environment. The machine does not require a compressed air connection or explosion protection. Ideal for small-series production. Footprint without infeed and outfeed: 1600x850 mm Year of manufacture: 2017 Chjdszku Rcopfx Ab Uea Connection value: 400V/25A, 14 KW Weight: 190 kg (without solder) Solder quantity: approx. 120 kg, filled with Felder SN100Ni+ Process width: 250mm, maximum PCB size: 470 x 250 mm. With extended infeed and outfeed (770mm each) Accessories: 4 extended soldering frames with center supports 7 solder bars of 400 g each, SN100Ni+ 1 other hand tools (hydrometer, spoon, spatula, etc.) The machine was only operated sporadically, approximately 6 times a year for half a day. Therefore, it is in like-new condition. Since the machine was only used with one soldering wave, the second solder pump is still unused and included in its original delivery condition. Self-dismantling and collection only! No shipping possible.

Condition: excellent (used), Direct from closed ready meals manufacturer in London. Csdsywpb Sjpfx Ab Usha

Condition: excellent (used), Complete 2 basket system for cook chill process, designed for rice, pasta and noodles etc. Wxcellent condition, bought new by a small ready meals factory in Wembley. Cjdpfxjvuvbhj Ab Usha

Condition: used, mileage: 6,200 km, power: 115 kW (156.36 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: automatic, number of seats: 3, loading space length: 2,900 mm, loading space width: 2,100 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Subframe: Stable, lightweight aluminum construction. Longitudinal and transverse beams made of aluminum. Subframe connected to the chassis according to the truck manufacturer's guidelines. External frame with lashing points. Floor: Consisting of 18 mm thick vehicle construction panels, with a film coating on the underside to prevent moisture penetration, and a non-slip screen-printed texture on the top. The panels are laid flat and sealed around the perimeter. Front wall: Closed with corner posts extending to under the roof, filled with aluminum hollow profiles. Side walls: Equipped with a PentaWave sliding tarp system, which is supported both at the top and bottom in specially shaped profiles. The sliding rollers inside allow the side walls to be moved effortlessly. These can be easily and quickly closed using the integrated tensioning system. Rear wall: Chsdpfx Aszhdldjb Usa Open, prepared for the installation of rear doors (see special versions!). Roof: Fixed roof, consisting of clamped crossbars in a 400 mm grid, with a tarp above. Impact protection: Aluminum strip attached to both sides to guide the Penta-Wave system. Accessories: 1 set of mudguards including mud flaps Holder for wheel chocks Red position lights above the rear portal on the left and right, as LEDs 3rd brake light in the center above the rear portal doors, as an LED Contour marking according to ECR R48, white on the sides and red at the rear, strip width 55 mm Load securing with KIM system 3 rows of Ancra Jungfalk with TRS locking bars KIM 5 x 7 cm (ceiling-guided) with horizontal spring telescopic rods 3 additional locking bars KIM 5 x 7 cm (without ceiling guidance). Mounting of barrier bars to the additional locking bars on the right and left made of aluminum square tube for load securing in the longitudinal direction. Interior lighting 1 LED light strip, centered in the body, including connection to the driver's cab switch. Two-wing rear door Made of aluminum sandwich panels with internal rotary latch closures. The doors have a smooth surface (optimal for lettering). Drop-down brackets for hole rows in the outer frame 4 pieces per side, mounted with a flap and stop nut (more can be installed upon customer request). Side impact protection Side flank protection, brackets galvanized and foldable, planks anodized. Rear view camera Rear view camera including connection to the monitor or navigation system installed by the truck manufacturer. If you have any questions about this vehicle, please contact Mr. Markus Müller:

Condition: used, mileage: 6,200 km, power: 115 kW (156.36 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: automatic, number of seats: 3, loading space length: 2,900 mm, loading space width: 2,100 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Subframe: Stable, lightweight aluminum construction. Longitudinal and transverse beams made of aluminum. Subframe connected to the chassis according to the truck manufacturer's guidelines. External frame with lashing points. Floor: Consisting of 18 mm thick vehicle construction panels, with a film coating on the underside to prevent moisture penetration, and a non-slip screen-printed texture on the top. The panels are laid flat and sealed around the perimeter. Front wall: Closed with corner posts extending to under the roof, filled with aluminum hollow profiles. Codpfozhdk Tsx Ab Ueha Side walls: Equipped with a PentaWave sliding tarp system, which is supported both at the top and bottom in specially shaped profiles. The sliding rollers inside allow the side walls to be moved effortlessly. These can be easily and quickly closed using the integrated tensioning system. Rear wall: Open, prepared for the installation of rear doors (see special versions!). Roof: Fixed roof, consisting of clamped crossbars in a 400 mm grid, with a tarp above. Impact protection: Aluminum strip attached to both sides to guide the Penta-Wave system. Accessories: 1 set of mudguards including mud flaps Holder for wheel chocks Red position lights above the rear portal on the left and right, as LEDs 3rd brake light in the center above the rear portal doors, as an LED Contour marking according to ECR R48, white on the sides and red at the rear, strip width 55 mm Load securing with KIM system 3 rows of Ancra Jungfalk with TRS locking bars KIM 5 x 7 cm (ceiling-guided) with horizontal spring telescopic rods 3 additional locking bars KIM 5 x 7 cm (without ceiling guidance). Mounting of barrier bars to the additional locking bars on the right and left made of aluminum square tube for load securing in the longitudinal direction. Interior lighting 1 LED light strip, centered in the body, including connection to the driver's cab switch. Two-wing rear door Made of aluminum sandwich panels with internal rotary latch closures. The doors have a smooth surface (optimal for lettering). Drop-down brackets for hole rows in the outer frame 4 pieces per side, mounted with a flap and stop nut (more can be installed upon customer request). Side impact protection Side flank protection, brackets galvanized and foldable, planks anodized. Rear view camera Rear view camera including connection to the monitor or navigation system installed by the truck manufacturer. If you have any questions about this vehicle, please contact Mr. Markus Müller:

Year of construction: 2015, condition: used, Comes with transport conveyor system + Rohs solder (350kg). Ask for additional information! Codpjy Uwdiofx Ab Uoha

Year of construction: 2014, condition: ready for operation (used), Working condition unit! Comes with infeed and outfeed conveyor systems and full of alloy. Machine still under operation Csdjzcardepfx Ab Ueha and to be released in Q3 2026. Ask for additional details!

Condition: new, functionality: fully functional, overall weight: 12 kg, total height: 113 mm, total length: 175 mm, total width: 100 mm, Sine table with magnetic clamping plate, 100 x 175 mm Manufacturer: Matchling Chsdoymzpfspfx Ab Uea Type: MCL-4070 Permanent magnet with mechanical on/off switch. Precise and stable construction made of hardened steel. Swivels on one axis. For clamping and machining workpieces at any desired angle. Even clamping force on the pole surface. Accurate angle adjustment using an end stop. Includes storage case. Length: 175 mm Width: 100 mm Height: 113 mm Accuracy: 0.003 / 100 mm Angle: 0–60° Weight: 12.2 kg

Condition: ready for operation (used), Year of construction: 2022, Excellent condition – from 2022-2023 (we have a total of 10 units). Chjdjzb Rf Sjpfx Ab Usa Inspection welcome.

Condition: good (used), Sine vise Type: for milling, cross tiltable Manufacturer: Stanko Model: 370P 22 Number: 3177 Size: 500 x 200 mm Base area: 500 x 200 mm Number of T-slots: 3 T-slot width: 11 / 20 mm T-slot depth: 6 / 16 mm Chjdpfx Ajwv Dfpob Uea Height: 100 mm Equipment: cross tiltable Dimensions: 500 x 200 x 100 mm Weight: 31 kg

Year of construction: 2026, condition: new, All components are ground to the highest precision. Thanks to the innovative design, angle adjustment is achieved without any change in parallelism or flatness. Adjustment is easy and secure using the angle scale. The magnetic clamping plate is based on neodymium and is liquid-tight. Stable construction despite low weight. Chodpfx Abeyx Izmj Usa Manufacturer: Grindtec Model: GS.450 Year of manufacture: 2026 Condition: new Category ID: 1168 Machine type: Precision sine table GS.450

Condition: used, Indexing table, sine table, swivel table Swivel indexing table Table length: 1130 mm Table width: 300 mm Table height: 112 mm Tilting angle: 2° Tilting angle: max. 7° - Tilting angle 2° via threaded spindle - Tilting angle max. 7° manually raised to the stop Overall dimensions L x W x H: 1450 x 300 x 112 mm Weight: 275 kg Chodpfxsinldpo Ab Uja Good condition Clamping plate, ideal for manufacturing wedge strips.

Year of construction: 2011, condition: used, Operational condition according to the factory. Chedpeyylpdjfx Ab Uoa Ask for additional information!