Used Spray Painting Line for sale (15,079)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Gksdpfexw Ux Hox Adked Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: used, Paint Line with (2) Delta Air Sweep Systems with Extraction, Wash /Degrease /Phosphate Treatment, Dry Off, Primer Booth (Delta Air Sweep), Curing Oven (GAS), Top Coat Spray (Delta Air Sweep) Final Curing Oven (GAS), Year 2013 Gkodpfx Ade Afpiyekjd

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, production capacity: 3,650 unit/h, The system has been completely overhauled! TECHNICAL DETAILS Capacity: approx. 3,650 pieces/hour Round dough pieces (cut): 40–65 g Long-rolled dough pieces (cut and uncut): 40–65 g Dough piece weight in 3-row operation: 40–85 g Round/smooth dough pieces via pretzel discharge: 40–85 g Processable products Sliced rolls Round and smooth dough pieces Gksdpo Agnwaefx Adkod Baguette rolls Hotdog buns Bread rolls EQUIPMENT Complete stainless steel design 3-row operation Pretzel discharge

Condition: used, No. 3280 Complete painting line / water-wash spray booths Used, system still completely assembled, from a furniture manufacturing company Large complete painting line, consisting of various water-wash spray booths, spraying equipment, extensive roller conveyor system as well as fresh air and exhaust air ducting Several water-wash spray booths / spray walls Spray booths partly designed as 3-sided booths Turntable available Various spraying units / pumps available Extensive roller conveyors for workpiece transport Fresh air supply / air technology available Exhaust air ducts / extraction system available Lighting above the spray booths available Dimensions of the spray booths approx. 3000 x 2000 mm / 2000 x 2000 mm / 2500 x 2000 mm Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location Gksdpszhblnsfx Adked

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Gjdpfez Rnu Tjx Adkekd Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: used, The painting line consists of the following elements: 1) MTL.120 monorail, 600 kg load capacity, equipped with hooks and rotation drive 2) Dry spray booth for painting 3) Dust extraction booth 4) Ducted solvent extraction system 5) Ducted paint oven system 6) Reciprocator for electrostatic spray guns 7) Wagner 30:1 high-pressure pump for solvent-based electrostatic installation 8) Protective enclosure for low-pressure ASAI system 9) Flow coating system Gedpeyy Rivofx Adkjkd 10) Low-pressure pump for ASAI electrostatic installation

Condition: like new (used), Year of construction: 2011, operating hours: 45 h, functionality: limited functionality, Paint finishing line for window coating with scanner, 25 trolleys, 6-axis painting robot with teach-in mode, and spray booth with paint recovery system via cooling. Extraction wall equipped with two extraction collectors, 800x3000xD550. Gsdpfx Aeywaqqodkokd The line has operated only 40 hours due to a change in production profile. Ready for recommissioning and internal equipment replacement. Option to purchase carousel and robot separately.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, For sale is a complete, fully functional automatic painting line, based on the Superfici Compact Spray 1300 automatic spraying system, along with a CEFLA drying system. The line is complete, currently assembled, and has been used in regular production. It is being sold as a complete technological line. The set includes: - Superfici Compact Spray 1300 painting machine - CEFLA drying tunnel – total length approx. 13 m - CEFLA control cabinet - CEFLA conveyor - GRACO Merkur X48 pump - GRACO D08B pump Condition: used, complete, and fully functional. The machine can be inspected on-site in Poland, in the Silesian Voivodeship (near Bielsko-Biała). Upon request, a video showing the line in operation and additional technical information are available. Available immediately. The terms for dismantling, loading, and transport can be agreed upon individually. Gedpfoz Ix Azjx Adkjkd Price: 49,900 EUR net.

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes Gkjdpfxjzf N Nij Adkod 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: good (used), Year of construction: 2009, For sale GIARDINA MOS/4PLUS paint line Gkjdpfx Adotxnp Njksd

Condition: used, Year of construction: 2023, functionality: fully functional, 6-axis CNC spraying robot for automatic surface treatment of windows, doors, and other suspended items. Features tracking, automatic color change, and intelligent control of paint and spray pattern. Manufacturer: CML Model: Ghost X Master Year: 2023 Condition: Used machine Max. workpiece dimensions: 3500x2640x150 mm Automatic color change: 5 colors + wash 2 spray guns: Air-mix Graco G40 Tracking: painting on moving workpieces Power: 18 kW Air pressure: 6 bar Workpiece loading/unloading: Gksdpfx Adj Aazwxskod manual Paint pumps: 5 pcs Wash pump: 1 pc.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a complete, fully functional, and automated powder coating line for metal parts, complete with an automated process transport system. This is a ready-made solution for manufacturers of shelving, steel structures, warehouse equipment, and other metal components requiring high-quality paint coatings. The entire system is an integrated process that includes the transport of raw parts, surface preparation, powder coating, curing, and inter-process transport. The price includes: Gkodpfez Azx Rjx Adkjd 1. Dismantling and reassembly of the line at a new location, including accommodation and meals for the technicians. 2. New insulation for the joints of the wall and roof panels, the furnace, and the floor. New bolts for the joints. 3. Sealants for the PP tunnel, connection of sections with tubs, and sections with sections.

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-format, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss surfaces. It is currently still fully assembled and installed. This allows interested parties to inspect the existing scope of the system and the installation situation before dismantling and to document it for a later reconstruction. Technical data and equipment: • Large-area, filtered supply air ceiling panel, approx. 8,100 × 4,500 mm • Filter ceiling divided into two areas across its width • Large-area floor extraction system, approx. 8,100 × 3,650 mm, with grating • Supply air treatment, approx. 24,500 m³/h • Exhaust air treatment, approx. 24,000 m³/h • Supply and exhaust air fans / air treatment • Existing heating / hot water system with pumps and fittings • Air ducts and existing piping • Electrical system control / control cabinet • Cabin lighting • Sale includes the system in its current, on-site configuration Condition and use: Used, condition appropriate for its age. The system was in regular production use until recently. Previous use included high-quality surface work up to and including high-gloss coatings. An inspection of the still-assembled system is highly recommended. Sales and dismantling conditions: Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading, and transport are the complete responsibility of the buyer and will be carried out at the buyer's expense. The buyer must organize the necessary specialist personnel as well as lifting, dismantling, and transport equipment. The complete dismantling and removal must be completed no later than July 31, 2027. Note: Technical specifications have been compiled based on available documentation, nameplates, and the current condition of the system. Specifications are without guarantee. The condition and scope determined during inspection shall be binding. Selling price: 19,500.00 EUR Gkodpfxjz Ikyre Adkod Price is net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: good (used), Year of construction: 1994, Working area approximately 2,080 x 1,430 mm, lateral impact plates on the right and left, filter area approximately 1,800 x 1,300 mm, Gsdjpvil Tjpfx Adkjkd 2 rows of paper volume filters approximately 650 x 1,800 mm, internal fine filter G4 approximately 1,350 x 2,000 mm, air flow rate 4,500 m³/h, pressure max. 500 Pa, motor 1.1 kW / 1,400 rpm. Ex works, as inspected, from the Seevetal location, subject to prior sale.

Condition: used, Painting line Manufacturer: Giardina, Rich Fruit, Neomec, Kremlin The painting system is designed for painting elements made of MDF or HDF boards. The spray booths have two circuits, one for clear coats and one for colored paints. The system is designed for water-based UV coatings. Gkedpfx Adjzuzg Soksd The system consists of the following elements: Infeed Manufacturer: Neomec Conveyor table with a cleaner Spray painting machine Manufacturer: Giardina Type: Dualtech 416 Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Turntable Conveyor table Conveyor table with a cleaner Spray painting machine Manufacturer: Rich Fruit Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Each booth has two circuits, one for paint and one for coatings, driven by KREMLIN pumps and spray guns from the same company. Length of the machine line: 92 m Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, Painting system Manufacturer: Cefla Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: - Infeed conveyor with light barriers - Dust removal brush machine - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces Gksdjzuzt Eopfx Adkjd - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts - Outfeed conveyor from the drying oven Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances - Dust extraction system for the infeed table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, operating hours: 2,040 h, Makor Spraying Robot RoboSTAR M – 2018 Godpfxszw Hzae Adkjkd Makor RoboSTAR M spraying robot, manufactured in 2018 and in good working condition. The machine has low operating hours and has been well maintained, making it an excellent option for automated spraying applications. Ideal for businesses looking to improve efficiency, consistency, and production capacity.

Condition: excellent (used), Year of construction: 2016, operating hours: 90,01,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE . Gkedpsy Uk A Ssfx Adked

Condition: used, Year of construction: 2020, Spray coating machine Manufacturer: Homag Type: PROFI GSF100/P/13 Year of manufacture: 2020 Technical data Spray machine for automated coating of furniture components, doors, stairs, and interior design elements with water-based or solvent-based paints. - Sled runner with a spray arm to accommodate four spray guns - Workpiece transport with a vacuum conveyor belt with additional paper support - Feed speed: 1 - 4.5 m/min - Average coating speed: 1.5 - 2.5 m/min - Working height: 900 mm - Extraction volume: approx. 10,000 m³/h - Diameter of extraction nozzle: 350 mm - Electrical connection power (without additional equipment): 10 kW - Compressed air consumption (without spray application): approx. 150 nl/min Workpiece parameters Workpiece width: 100 - 1300 mm Workpiece length: 300 - 3000 mm (without additional workpiece support) Workpiece thickness: 5 - 60 mm Workpiece weight: max. 80 kg Workpiece material - Chipboard, MDF and HDF boards Gkjdpj Adr Hxjfx Adked - Solid wood components - Lightweight panels - The difference in height between workpieces may be a maximum of 2 mm Coating material - Paint based on water or solvent Electrical parameters - Operating voltage 400 volts, 50 Hz Roller table for machine infeed/outfeed - Powered roller table for automatic transport of workpieces Mobile paper roll trolley - For quick changing of the unwinding paper roll Touchscreen operation - Machine operation is performed via a touchscreen control panel, which is ergonomically positioned on the operating side of the machine. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), machine/vehicle number: 89915, Drive system = compressed air, Material/air ratio = 16:1, Maximum material pressure = 90 bar, Air inlet pressure = 1 to 6 bar, 4 double strokes per 1 liter of material, with MX type spray gun with double hose, unused since the last maintenance in 01/20, Condition as inspected, Gkedpfxjiv Huwe Adked Ex works, from warehouse Seevetal, subject to prior sale.

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Gsdpfxoy A Tpqj Adkekd Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: good (used), functionality: fully functional, High-pressure piston-diaphragm pump. Universally suitable for aggressive, abrasive, or shear-sensitive products. Very low rinsing agent consumption. For all applications up to 250 bar and 5 l/min. Supplies up to 8 AirCoat spray guns. + 3 automatic AirCoat spray guns with internal control for installation in automated painting systems. +FITTINGS+AIR/PRODUCT HOSE Gkjdpfx Adexmf Svjkod

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07022/01, We are offering this used Cefla Finishing SPRAYBOTIC RU MW machine, manufactured in 2007. Machine type: SPRAYBOTIC RU MW Year of manufacture: 2007 Serial number: 07022/01 Supply voltage: 380 V Electrical frequency: 50 Hz Total installed power: 38.5 kW Gedozhbd Rspfx Adkskd If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 2026, operating hours: 7,000 h, condition: used, We offer this used CML Finishing Ghost C Master CML Ghost 6 axis robot painting line, year of construction 2018. Including: 1pcs Master CML Finishing Ghost C robot 1pcs Slave CML Finishing Ghost C robot 1pcs 3D Scanner with dimensions and depth scanners 2pcs Control cabinets with monitors 1pcs Graco Premier 800 pump 5pcs Graco G36W05 pumps Gksdjyx Sv Uepfx Adksd 1pcs Belmeko Spray booth with exhaust and return air system If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Storti Nailing Line GSI/150-AL2 – pallet line The Storti GSI/150-AL2 pallet nailing line is designed for efficient pallet production. This robust industrial machine is suitable for automated pallet assembly, offering reliable performance and increased production capacity. Holtec Variocut VC-SHKA-HPI – cut-to-length saw / optimization line Gsdpszgayuefx Adkekd This industrial machine is designed for precise and efficient wood cutting. It is suitable for woodworking operations requiring reliable performance, high output, and accurate material cutting.