Used Spraying Automat for sale (24,879)

Condition: new, Year of construction: 2026, Maximum cutting diameter 400 mm Maximum rectangular cross-section 400 × 400 mm Band dimensions 3860 × 34 × 1.1 mm Band speed 27 / 45 / 69 m/min Speed ​​regulation Stepless (3 ranges) Power supply 400 V Main motor power 4 kW Drive type Mechanical transmission + hydraulic system Bodpfszr I T Hsx Abtoll Machine type Automatic band saw Design Column-type Vise Hydraulic Material feed Automatic, hydraulic Control Automatic (battery mode) Feeding accuracy ±0.20 mm Cooling Coolant system (flood) Belt cleaning Wire brush Machine dimensions (L × W × H) 2400 × 2380 × 1800 mm Net weight 2100 kg Gross weight 2300 kg

Condition: used, Heavy-duty, high-performance automatic band saw with a horizontally, parallel-traveling saw band, built 2005, for cutting round, square and flat material as well as tubes and profiles in all grades — especially tool steels and hard-to-machine materials (titanium, Hastelloy, Inconel, etc.). Cutting range: round ø430 mm, square/flat H×W 430×430 mm, clamping range 0–430 mm. Saw unit in steel-mineral-cast composite construction with KASTO TrumGuides vibration damping. Saw drive 15.0 kW (14.0 kW at the wheel), connected load 25.0 kW, stepless cutting speed 30–300 m/min, saw feed 0.5–300 mm/min. Automatic NC material feed via ball-screw drive, hydraulic clamping vises on both sides, hydraulically actuated and electronically monitored band tension, self-adjusting chip removal brush, automatic cutting-gap widening and automatic zero-positioning of the first cut. Fitted with a plate belt conveyor and KASTO EasyControl. Delivered WITHOUT infeed magazine — sold without the existing chain magazine. Bledpfszpb Eqox Abtjl

Condition: good (used), Year of construction: 2020, functionality: fully functional, Automatic strapping machine, Mosca, SoniXs-TR6 Pro – used: Price ex-works: only €17,500.00 (net) ex-works! Manufacturer: Mosca Type: SoniXs-TR6 Pro Year of manufacture: 2020 Machine number: 119645 With two rolls – the machine switches automatically when one roll is empty The machine is currently operating with 12 mm wide strapping band Designation: pp-120-055-bl/-1-g-200-2500 Material: Polypropylene (PP) / Band width: 12.0 mm / Band thickness: 0.55 mm / Tensile strength: 120 kg / Core diameter: 200 mm / Run time/length: 2500 m Former new price: €36,461.00 1L+N+PE, 50-60Hz, 100-240V, 3.00 - 1.25 A, max. 16 A Bodpozpf Shofx Abtell Price includes a partially used pallet of strapping band (see photo) and a small spare parts kit! Condition: good, used sparingly Available: immediately Location: Duderstadt

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic optimising end cutting saw PAUL 11 MKL MAXI 5 Premium Year 2006 Bledpezraaxofx Abtel Input table automatic (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: refurbished (used), Year of construction: 2026, - The Trepko XPG 40 is a high-performance butter packing machine designed for automated packing of butter into various sizes. Known for its robust construction and outstanding reliability, this machine features advanced technology to ensure precise filling and wrapping. - Key attributes include: - Versatility: Suitable for different butter formats and packaging styles. - Efficiency: High-speed operation reduces production time while maintaining top quality. - User-Friendly controls: Easy to operate, allowing for quick adjustments and setup. - Hygienic Design: Constructed with easy-to-clean materials, adhering to food safety standards. - Durability: Built to withstand the demands of a busy production environment. - The Trepko XPG 40 is a trusted solution for manufacturers looking to enhance their butter packaging processes, ensuring both efficiency and quality. Format: 100 x75 x 30 mm Butter Infeed: Twin Screw Augers Blodpfx Abezwli Ajtel Packaging Material: Foil, Parchment Paper, Grease Proof Capacity: up to 90 packs/min Weight: 1600 kg Power: 2.2 kW Available: Immediately Condition Details: Fully overhauled and ready to be used Not used since renovation

Year of construction: 2000, condition: good (used), automatic cross strapping machine with turn table Bljdpjg Nkf Usfx Abtel single strap max bundles/min: 35 double strap max bundles/min: 17 cross strapping max bundles/min: 15 bundle width: 200-560 mm bundle length: min 200 mm bundle height: 10-440 mm bundle diagonal at cross strapping: max 560 mm Electrical data: 200-440V, 3Ph AC, 50 Hz, 1,5 kW weight: 540 kg

Year of construction: 2005, condition: good (used), Automatic single, double or multiple strapping of e.g. bundles behind a press bindery stacker. Normally integrated into a complete line for bundles/packages. YOC: 2005 Type of strapping: single, double strapping max speed for single strap: up to 35 bundles/min max speed for parallel (double) strap: up to 17 bundles/min max bundle dimensions (w x l): ~500 x 600 mm min bundle (package) height: ~10 mm max bundle (package) height: ~400 mm max weight bundle/package: ~25 kg Infeed / outfeed (conveying) height: ~850 mm Continuously adjustable conveyor speed Metric input of strapping position Type of sealing: heat-weld sealing Strapping material: PP No of strap coil dispenser: single Strap coil dispenser - core diameter: 200 mm Strap coil dispenser - core width: 190 mm Equipment: - back stop (package stop) - hold-down device - auto. height detection - interface to up-/downstream equipment - auto. strap feeding - auto. strap end detection Blodjh I Dimjpfx Abtel - auto. strap loop ejection (on "no bundle cycle") Over all length equipment: ~760 mm Over all width equipment: ~1540 mm Over all height equipment: ~1600 mm Input Power: ~2 kVA Voltage: 400 V 3Ph, 50/60 Hz Air requirement: ~8l/cycle; 6 bar Weight: ~415 kg

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,893 mm, total height: 1,585 mm, total width: 1,240 mm, warranty duration: 12 months, type of input current: AC, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, Pratika 56 MPE X2 The Minipack Pratika MPE X2 is a proven, fully automatic machine for manufacturing shrink film packaging. This machine is highly versatile and user-friendly, making it suitable for a wide range of products in both food and non-food sectors. • Fully automatic L-sealer with brushless motors and modern PLC control with a 7” color display • Simple operation • Storage of up to 128 recipes including product images • Quick product changeovers • Up to 3,600 units per hour Bjdpfx Ajx Tp H Tsbtoll • Convenient and fast product changeovers • Max. product dimensions: 600 x 400 x 240 mm • Machine dimensions: 2,480 x 1,240 x 1,675 mm • No compressed air required! • Doors on both sides of the machine • Machine interior equipped with lighting

Condition: ready for operation (used), Year of construction: 2011, operating hours: 8,733 h, functionality: fully functional, spindle bore: 26 mm, rotational speed (max.): 7,200 rpm, number of axes: 5, number of tool turrets: 2, Long-turn lathe with an extended accessory package and spare parts! Counter-spindle: Completely re-conditioned 05/2026 TECHNICAL DETAILS CNC control: GE Fanuc Series 18i-TB Number of axes: 5 Axes: X1, X2, Y, Z, C Bljdpfxeztn Imo Abtel Spindle Spindle speed: 50–7,200 rpm Spindle bore: 26 mm Spindle stroke: 160 mm TURRET Number of turrets: 2 Positions per turret: 6 MACHINE DETAILS Motor power: 3.7 kW Weight: 2,600 kg Spindle hours: 8,733 h Control on: 10,642 h Feed time: 3,257 h Part counter: 478,135 EQUIPMENT - Bar feeder FMB Turbo 3-36, year of manufacture 2011 - Chip conveyor - Package of fixed and powered tool holders - Package of collets and guide bushings - Discharge system for long parts including reduction sleeves - Double-cone clamping system on the main spindle, system JBS - Breakage detection for cut-off tools, Detector France - Ejection control, Detector France - JBS guide bushing, not yet installed - Tool presetting device with optics for external tool setup - Replacement worms for chip conveyor - Mounting device for adjusting the cylinder of the working hood - Various spare parts

Year of construction: 2018, condition: ready for operation (used), Max. output: 1400 bottle/h, PET can lid format set: 100/127mm, can diameter: 147.4/182mm, pitch diameter: 530, operational hours counter: ca. 500h, with documentation. Bsdpfji A Iykex Abtsll

Year of construction: 2007, condition: ready for operation (used), Number of axes: 6, x-travel: 240mm, y-travel: 350mm, z-travel: 350mm, U-travel: 9500mm, A-travel: 360°, max. bar length: 7500mm, max. workpiece weight: 500kg, work spindle power: 4.55kW, suitable for drilling, milling, thread cutting, aluminum cutting, has been regularly serviced, with documentation and roller conveyors, on-site inspection is possible. Blodpforl Rbgex Abtsl

Condition: ready for operation (used), Year of construction: 2012, Machining length: 6500mm, equipment: fencing, control cabinet, Hagen & Göbel spindle unit, power: 5.5kW S1/7.9kW S6, speed range: 100 to 6000/min continuously variable, tool holder: SK30/DIN69871 form A, drilling capacity in steel 60/aluminium: 18/20mm, thread in steel 60/aluminium: M14/M16, spindle throat: 150mm, vertically opening protective cabin, pneumatically movable up and down, operation via push button, coolant system emulsion AP3000/6500, delivery rate: 70l/min, tank capacity: 150l, support table with T slot strips size 16, ten clamping cylinders, support surface: 6500x330mm, equipped with ten double acting pneumatic cylinders (50x40), tool changer plate magazine, travelling plate magazine for eight tools, change time: approx. 8 to 10s, max. tool holder diameter: 50mm, max. length for tool holder with tool: 250mm, Heidenhain HR130 handwheel integrated in control housing, chip tray, 6 removable chip drawers, pendulum operation for normal table, protection by light barrier, device for efficient production of series parts, machine table with separating discs for 900mm safety zone, spray mist device, tank capacity: approx. 1l, laser technology, retrofit AP6500 HK laser technology. Control: HEIDENHAIN iTNC530, length: 8000mm, width: 2400mm, height: 2450mm, weight: 4.5t, with documentation. An on site inspection is possible. Bljdpfszcfi Uex Abtel

Condition: ready for operation (used), Year of construction: 2017, Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available. Bedpfxew Rqv As Abtell

Condition: ready for operation (used), Two identical filling machines are available. Output capacity for 100ml, 500ml, 1000ml containers: 17-18/min, output capacity 5000ml containers: 9-10/min, transport pitch: 317.5 mm, equipped with an operator panel, can separator, lid placer, lid closing unit and documentation. An on-site inspection is possible. Bljdpfx Abszh Nh Djtsl

Year of construction: 2000, condition: ready for operation (used), Voltage: 380V, frequency: 50Hz, 3 phases, equipment: rotary indexing table, filling station with powder hopper, pressing station with hydraulic pressing unit, conveyor belt, control panel with Run/Ram/Index functions, main switch, HMI/display PP-006, Mitsubishi PLC FX2N-32MR, expansion module FX2N-4DA, Mitsubishi operator panel F940GOT-SWD-E, hydraulic power unit with electric motor, pneumatic and hydraulic lines, safety enclosure, emergency stop, 400V/CEE connection and CE marking. An on-site inspection is possible. Bodpezadmgefx Abtjll

Condition: ready for operation (used), Year of construction: 2006, A Weber slicer sickle knife grinding machine is available. Control levels: 3, version: CNS, max. blade length: 650mm, grinding angles: 22°/26°/28°/32°, grinding wheel dimensions X/Y/Z: 100mm/40mm/50mm, dressing wheel dimensions X/Y/Z: 50mm/25mm/20mm, blade cutting edge to rotor center distance: 400mm, machine dimensions X/Y/Z: approx. 1100mm/550mm/1800mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Blodpfx Aszli Ulsbtel

Condition: used, Pressure: 30t Strokes per minute: 120-600 Stroke: 40mm Up table size: 250x500mm Down table size: 600x600mm & 400x320mm Between Columns Technical characteristics: *AUTOFEED LENGTH 80mm, WIDTH 320mm *AIRCLUTCH Power: 7,5kw DIMENSIONS: Height: 2600mm Width: 1800mm Length: 1200mm Bsdpfx Aj Dvk Aobtjll Weight: 3800kgr New electric systems

Condition: refurbished (used), Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can immediately assign your request to the appropriate contact person, gather all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you! TSWc 20.20 Dry spray wall Dimensions: 2000 x 2000 mm W x H + Fan at the top Airflow: 7,200 m³ / h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 Ø mm Depth: 900 mm Double filtration: paper filter + Paintstop filter mat Bledpfx Aefn Ndcobtsl Clamping rail (+ EUR 150.00 net) Options/additional cost for: Paintstop filter mat clamping rail: EUR 150.00 net Side guide plates with hinges: EUR 590.00 net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK S-200RH The CORMAK S-200RH metal cutting band saw is a modern semi-automatic band saw designed for intensive operation in the metalworking industry. It enables cutting at angles from -45° to +60°, providing high precision, repeatability, and efficiency even when processing heavy sections. The machine combines precise blade guidance with automation of key functions, including hydraulic arm lifting/lowering and hydraulic vice control. Main advantages of the machine Hydraulic arm movement control (up/down) with smooth adjustment of lowering speed. Arm position memory function – automatic return to a predefined height. Swivelling saw arm from -45° to +60° with a clear angle scale. Hydraulic quick-clamping vice – suitable for cutting profiles and solid materials. Heavy cast iron saw arm – ensures rigidity and operational stability. Efficient coolant pump with closed-loop cooling system. CE safety system – including limit switches and emergency stop button. Construction and technology The band saw is built on a stable steel base with an integrated hydraulic unit and coolant tank. The saw arm is made from a single-piece cast iron construction, providing high resistance to vibration and twisting, which directly improves cutting quality. The blade guides are equipped with carbide inserts and roller bearings, ensuring accurate alignment and straight cutting of processed materials. A high-performance ABB M3V series motor and worm gear transmission provide two cutting speeds for optimal adaptation to different materials. Precision and work efficiency Bjdpji D D A Sjfx Abtsll The machine enables fast and repeatable cutting of pipes, profiles, and solid materials, including very small sections starting from Ø5 mm. Automation of the cutting process (arm movement and hydraulic vice operation) significantly reduces operating time and minimizes operator involvement. The integrated blade cleaning brush maintains proper working conditions and extends blade service life. Applications The CORMAK S-200RH model is designed for: production workshops, steel construction plants, machine manufacturing industries, maintenance departments. It is particularly suitable as a band saw for pipes and profiles in serial production and applications requiring high cutting accuracy and repeatability. Standard equipment Control console mounted on a separate pedestal Integrated hydraulic power unit Hydraulic vice Automatic arm lifting and lowering with position memory function Blade cleaning brush Coolant system with pump Bimetallic band saw blade Technical documentation (DTR) and CE declaration of conformity Optional equipment Material feeding rollers Laser cutting line guidance system Extended cutting length measurement system Semi-Automatic Metal Cutting Band Saw CORMAK S200RH Technical data Parameter Value Machine type Semi-automatic band saw Arm lifting and lowering Hydraulic, smooth adjustment Blade speed 36 / 70 m/min Angular cutting range -45° to +60° Vice Hydraulic Minimum cutting diameter Ø5 mm Minimum material length in vice 30 mm Vice base height 780 mm Cutting blade dimensions 27 × 0.9 × 2910 mm Total motor power 2.1 kW Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 530 kg

Condition: good (used), Year of construction: 2004, I sell the semi-automatic finger joint line GreCon Profijoint PJ7/6100-LI. Year 2004. Input length 100-1.000mm Input width 40-150mm / 510mm in 1 step Input thickness 20-50mm Blsdpomig Tdjfx Abtel Automatic finger joint unit with glue spraying 1 side Automatic turning of the material for the 2nd pass on turning table Automatic feeding to the press Press 3,00 - 6,10m with automatic cycle and end-cutting saw Total area covered 10.50 x 3.50 m Strong construction. Very good condition. Available immediately.

Condition: good (used), Year of construction: 2000, Dimensions (L/W/H) 2300 x 700 x 1300 mm Air consumption 3500 m³/h Motor output 1,5 kW weight of the machine ca. 150 kg Bljdjxr Rbmepfx Abtjl

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Bedpezacwdofx Abtoll Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: used, In einem sehr guten Zustand, Letter Press Cylinder DIE Cutter Heidelberg S in good working condition. Stanzzylinder / Automatic DIE-Cutter Cylinder Heidelberg S Serial-No. 13934 Size max. 540 x 720mm Speed min. max. 4.000 sph Punching pressure: 60T Bsdpszna S Hsfx Abtjll Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2025, functionality: fully functional, Automatic bandsaw Pedrazzoli Model SN 350 AP. Used machine, CE certified. Opportunity to see the bandsaw in operation. User and maintenance manual included. Manual, semi-automatic, and automatic cycle options available. Bedpezmxzwsfx Abtsll Cutting angles: 0° - 45° - 60° Vise opening: 350 mm Round stock cutting capacity at 0°: 280 mm Round stock cutting capacity at 45° (left): 200 mm Round stock cutting capacity at 45° (right): 250 mm Round stock cutting capacity at 60° (right): 140 mm Weight: 1050 kg

Condition: used, Used NIRO stainless steel spray dryer - N° 1405 - Tank Ø 800 x 600 mm - Cone Height 650 mm - Electric heating 9 kw - Fan 0.75 kw Blodezcwnvspfx Abtol