Used Sprocket for sale (68)

Condition: good (used), Sprockets, duplex sprocket, sprocket Dcodpfxsdg Snqj Afpoc -Sprocket pitch duplex: 1" x 17.02 mm -Number of teeth: 57 teeth -Diameter: 471 mm -Total width: 90 mm -Tooth width: 17 mm -Hole: Ø 90 mm Quantity: 1 piece available Price: per piece -other sprockets also in stock

Condition: used, Sprockets, duplex sprocket, sprocket Dodpfxod Tg Dao Afpscc -Sprocket pitch: Duplex 1 1/2 "x 1" -Number of teeth: 25 teeth -Diameter: 318 mm -Total width: 100 mm -Tooth width: 24.1 mm -Inside diameter: 80/130 mm -Number: 25x sprockets available -Price: per piece -Weight: 33.5 kg -other sprockets: in stock

Condition: used, Sprockets, duplex sprocket, sprocket -Number of teeth: 23 teeth -Diameter: 345 mm Dcodpfxod Tg Dbj Afpec -Total width: 120 mm -Tooth width: 30 mm -Socket: O 90 mm -Number: 3x sprockets available -Price per piece -Weight: 50 kg -other sprockets: in stock

Condition: good (used), Sprockets, triplex sprocket, sprocket -Sprocket pitch Triplex: 1 1/4" x 3/4" -Number of teeth: 45 teeth -Diameter: 470 mm -Total width: 140 mm Dcjdsdgnztepfx Afpjc -Tooth width: 18.5 mm -Hole: Ø 125 mm -Number: 4x sprockets available -Price: per piece -Weight: 103 kg / 106 kg -other sprockets in stock

Condition: excellent (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 1 inch 12 teeth -Type: 20B-2 1 1/4" x 3/4" Dedpfjv Ukxuex Afpocc -Shaft mount: inner Ø 50 mm -Dimensions: see photos -Total dimensions: Ø 138 x 80 mm -Weight: 3.8 kg.

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 15 teeth Djdpfxjwlzkhj Afpscc -Diameter: 197 mm -Shaft mounting: Inner Ø 60 x 163 mm -Bolt circle: Ø 94 mm M12 -Dimensions: see photos -Overall dimensions: Ø 197 x 163 mm -Weight: 15.7 kg

Condition: used, Sprockets, triplex sprocket, sprocket, conveyor sprocket -Pitch triplex sprockets: 1"x 17.02 mm -Number of teeth: 40 teeth -Diameter: 340mm -Total width: 105mm -Dimensions: see photos -Intake: Ø 75 - 76 mm -Total dimensions: Ø340 x 105 mm Dodpfsiq Th Ijx Afpjcc -Weight: 45.3 kg -other sprockets in stock

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Sprocket: 2 pinions, 3/4 inch 14 teeth -Diameter: 93 mm -Shaft mount: inner Ø 40 mm -Dimensions: see photos -Quantity: 70x sprocket available -Price: per piece -Total dimensions: Ø 93 x 80 mm -Weight: 1.5 kg/piece Dodpfx Aev R Tvhsfpecc

Condition: used, Sprocket, sprockets, sprocket for roller chain, drive chain -Gear: 76 teeth Dcodpfxjgua H Ne Afpsc -Sprocket pitch: 1 "x 17.02 mm 16B-1 -Shaft mount: inside O 50 mm -Measures: see drawing in the photos -Number: 5x gears available -Price per piece -Dimensions: O 628 x 58 mm -Weight: 38 kg

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 12 teeth -Shaft mounting: Inner Ø 70 mm -Dimensions: see photos Dcodpfx Afjh Ig Skepsc -Dimensions: Ø 162 x 275 mm -Weight: 11.3 kg

Condition: used, Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 1 inch 15 teeth -Diameter: 133mm -Shaft holder: inner Ø 50 x 70 mm -Dimensions: see photos -Number: 4x sprocket available -Price per piece -Total dimensions: Ø 133 x 70 mm Dodpfjt U Tqcex Afpjcc -Weight: 3.6 kg/piece

Condition: used, Sprockets, duplex sprocket, sprocket -Sprocket: is used -Sprockets duplex: 2 1/2 "x 1 1/2" -Number of teeth: 25 teeth -Diameter: 533 mm -Total width: 150 mm -Tooth width: 34 mm -Take: Ø 120 mm -Number: 1x sprockets available Dcsdpfxedg Snfo Afpoc -Price: per piece -Weight: 152 kg -other sprockets in stock

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 1 " x 17.02 mm 57 teeth -Diameter: 475 mm -Shaft holder: inner Ø 90 x 90 mm -Dimensions: see photos -Quantity: 1x piece available Dedpfx Ajwzu Sdsfpjcc -Dimensions total: Ø 475 x 90 mm -Weight: 62 kg

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 18 teeth -Shaft mounting: Inner Ø 100 mm -Dimensions: see photos Dcodpfx Afjh Ig Scepec -Number: 2x gears available - Price: per piece -Overall dimensions: Ø 237 x 245 mm -Weight: 30 kg/pc.

Condition: new, Year of construction: 2016, functionality: fully functional, total height: 830 mm, total width: 800 mm, total length: 1,820 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drive pinion: 10 teeth Chain sprocket: 10 teeth Carrier width: 30 mm Chain link length: 130 mm Dedpoyf Aypefx Afpscc MACHINE DETAILS Dimensions (L x W x H): 1,820 x 800 x 830 mm EQUIPMENT 2 pcs drive unit 1,600 x 360 x 520 mm 5 pcs spare chains (4 pcs packed)

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours Dodpfjyfxv Tox Afpecc 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Djdpfx Afsx D Df Nspscc Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Dsdpfsx D A Rkex Afpecc The panel will be in type of compiled to IC standarts.

Condition: used, Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 80 mm -Transport roller width: 800 mm -Total length: 830 mm -Sprocket: 1/2 "x 11 teeth -Thread: M8 -Number: 41x rolls available -Price: per piece -Weight: 4.1 kg/piece Dcodpfx Afsdbhlqjpsc

Condition: used, pneumatic coupling combination, spare part eccentric press Djdpsdgfhyofx Afpscc -pneumatically operated -Pulley: Ø 495 mm -V-belt width: 13 mm -Shaft exit sprocket: Ø mm -Dimensions: 600/600/H495 mm -Weight: 140 kg

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -driven roller conveyor with driven slewing ring Dcodpfx Afec N N Hqopjc -Roll width: 720 mm -Roller conveyor length: 1500 mm -Roll diameter: 90 mm -driven: via sprockets -Geared motor: 0.55 kW -Speed: 18.9 m/min -Slewing ring driven: 0.18 kW 31.5 rpm -Dimensions: 1510/900/H695 mm -Weight: 314 kg

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roll width: 600 mm -Conveying length: 3400 mm -Diameter roller: 84 mm -Center distance: 270 mm adjustable -Height: 815 mm adjustable to 930 mm -driven: via sprockets -Geared motor: 0.55 kW -Speed: 17 m/min -Foot switch: right/left rotation -Number: 1x roller conveyors available -Price: per piece -Dimensions: 3520/710/ H900 mm Dcjdpfxjcft Tus Afpsc -Weight: 260 kg

Condition: used, Brake disc -Brake discs: conversion kit -Sprocket: Ø approx 34 mm -Hole circle: Ø 80/M10 -Price: complete Dedpof D H Hisfx Afpecc -Dimension: Ø 221 x 50 mm -Weight: 3.7 kg/piece

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Total length: 1590 mm -Shots: M10 -Sprockets: 2x Ø 62 mm 14 teeth / 2x Ø 41 mm 10 teeth -Quantity: 4x transport rollers available -Price per piece Djdpfx Aforxw Epspscc -Dimensions: Ø 60 x 1590 mm -Weight: 7.8 kg/pc.

Condition: used, Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Total length: 1540 mm -Shots: M10 -Sprockets: 2x Ø 62 mm 14 teeth Dcedperxw Hxefx Afpjc -Quantity: 2x transport rollers available -Price per piece -Dimensions: Ø 60 x 1540 mm -Weight: 6,9 kg/pc.