Used Teeth Bewel for sale (552)

Condition: reconditioned (used), Year of construction: 2018, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F M Shaft - Year of manufacture: 2018 - Engine: MTU R61300 with 490 hp - AD BLUE - Weight: 30,000 kg - Remote control Itjdpfszx Rz Tjx Anion - Humidification system - Rear conveyor belt 7m - Over-band magnet - Track chassis - Central lubrication system - Limiter - Roller: M 3000mm x 800mm - Teeth: 124 The machine is in its original condition, not repainted, only workshop-reconditioned.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Band saw blade grinding machine Risstaler riv Rivo 200 GA Year of manufacture 1984 Various tooth shapes can be selected Iedpfx Anoz Uq E Asiotn Operating manual available Feed rate: 30 or 60 teeth per minute.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Isdpfx Ansz Rqcmjijtn Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: excellent (used), Year of construction: 2008, CNC machine for applying Stellite to the teeth of bandsaw blades / Type GPA200 Stellite application machine Technical data for bandsaw blades: Blade width: 80 - 360 mm Blade length: 6 - 18 m Blade width: 35 - 100 mm Blade thickness: > 0.6 mm Technical data for frame saw blades: Blade width: 80 - 200 mm Blade thickness: > 1.6 mm Tooth pitch length: < 1700 mm Technical data for mini frame saws: Blade width: > 35 mm Blade thickness: > 0.5 mm Tooth pitch length: < 700 mm Rake angle: 10 - 40° External compressed air supply: < 6 bar Stellite diameter: 0.76 - 4 mm Working speed in teeth/minute: < 10 teeth/min Ijdpfxez Hdqbj Aniotn Welding unit - large burner Current: < 150A, operating mode: Mono-gas/Bi-gas, plasma gas flow rate: 1.5 - 2 l/min, shielding gas flow rate: 5 - 8 l/min Welding unit - small burner Current: < 120A, operating mode: Mono-gas/Bi-gas, plasma gas flow rate: 0.2 - 0.6 l/min, shielding gas flow rate: 2 - 4 l/min Additional slider

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89A 2664, power: 18.5 kW (25.15 HP), overall weight: 1,950 kg, fuel type: electric, loading space volume: 1.6 m³, loading space width: 800 mm, loading space length: 1,000 mm, loading space height: 2,000 mm, Description For sale is a robust ZENO wood waste shredder / single-shaft shredder, type ZTLL 800 × 1000, manufactured in 1989. The machine is in good working order and was used in a wood processing facility. The shredder features an 18.5 kW main drive and a hydraulic pusher floor. The feed hopper measures 1,000 × 800 mm, and the height is approximately 2,000 mm. The rotor diameter is approximately 300 mm (type-specific), and the rotor speed is approximately 140 rpm. The machine weight is approximately 1,950 kg (type-specific). The rotor is equipped with cutting plates / individual teeth mounted on tool holders. The blades or cutting teeth are in good used condition. The rotor also shows a well-maintained condition with no significant damage visible in the provided images. It is fitted with a sturdy, reinforced perforated screen basket with a 20 mm hole diameter. The perforated screen is in very good condition. The 20 mm screening is suitable for producing a correspondingly fine, uniform shredded material. The complete electrical control system, including the control cabinet, is included in the scope of delivery. This includes, among other things, a main switch, system on/off, operating and fault indicators, forward/reverse, and control for the hydraulic pump. The control cabinet is fully present and will be sold together with the machine. The offer also includes a powerful transport fan for pneumatic transport of the shredded material. The fan motor has 18.5 kW / 25 hp, 380/660 V, 36.5/21 A, 1,455 rpm, 50 Hz, cos φ 0.86, and protection class IP54. The motor weight is 136 kg. Existing pipes and fittings belonging to the system can be taken over after inspection. This means that not only the shredder itself is offered, but a largely complete combination of wood waste shredding, control, and pneumatic material transport. The machine is particularly suitable for wood waste and production residues from carpentry shops, interior design, timber construction, joineries, and comparable wood processing companies. Inspections are possible by appointment. The location of the system is 3608 Thun, Switzerland. Sale from the location. Dismantling, loading, and transport, as well as any export and customs costs, are the responsibility of the buyer, unless otherwise agreed in writing. The machine is sold in its existing used condition as inspected. Technical specifications are provided to the best of our knowledge; errors and prior sale are reserved. Selling price: 12,500.00 EUR Price net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer. Itjdpfxoz Ikz Ao Anion Technical specifications in brief Manufacturer: ZENO Zerkleinerungsmaschinenbau Norken GmbH · Type: ZTLL 800 × 1000 · Year of manufacture: 1989 · Machine No.: 89A 2664 · Feed hopper: 1,000 × 800 mm · Height: approx. 2,000 mm · Main drive: 18.5 kW · hydraulic pusher floor · Perforated screen: Ø 20 mm, very good condition · Blades/cutting teeth: good condition · Rotor diameter: approx. 300 mm* · Rotor speed: approx. 140 rpm* · Machine weight: approx. 1,950 kg* · complete control cabinet included · Transport fan: 18.5 kW / 25 hp. * Type-specific comparison data ZENO ZTLL 800 × 1000. The specifications and condition of the offered machine are binding.

Condition: new, functionality: fully functional, Year of construction: 2025, A double teeth roller crusher is a type of roller crusher commonly used in industries that involve the crushing of various materials, such as mining, metallurgy, building materials, and chemical processing. This crusher is characterized by its two pairs of closely spaced, parallel, and oppositely rotating rolls with "teeth" or "knurling" on their surfaces. The teeth are designed to grab and crush the material, providing efficient and uniform size reduction. Here are key features and aspects of double teeth roller crusher equipment: 1. Double Roller Design: - The crusher features two parallel, counter-rotating rollers, each with a set of teeth or knurling on its surface. The dual roller design facilitates a consistent and efficient crushing process. 2. Teeth Configuration: - The teeth on the rollers are designed to grip and crush the material. The arrangement and shape of the teeth may vary based on the specific application and the characteristics of the material being processed. 3. Adjustable Gap Settings: - The gap between the rollers can usually be adjusted to control the size of the crushed particles. This feature allows for customization of the final product size. 4. Material Feed and Discharge: - Material is typically fed into the top of the crusher and is crushed between the rotating rollers. The crushed material is discharged at the bottom of the machine. 5. High Efficiency: - Double teeth roller crushers are known for their high efficiency in crushing various materials. The dual roller design provides a more consistent and controlled process compared to single roller crushers. 6. Versatility: - These crushers are versatile and can be used for various materials, including coal, limestone, slag, clay, and other similar materials. 7. Application in Mining and Processing: - Double teeth roller crushers are commonly used in the mining industry for the crushing of minerals and ores. They are also utilized in other industries for size reduction and processing of materials. 8. Dust and Noise Control: - Some double teeth roller crushers are equipped with features to control dust emissions and reduce noise during operation, improving the working environment. 9. High Torque and Power: - A powerful motor and a robust drive system are essential components to drive the rotation of the rollers, providing the necessary torque and power for efficient crushing. Iodpfjq Nga Uox Anijtn 10. Maintenance and Safety: - Regular maintenance is essential for optimal performance. Safety features, such as emergency stops and safety guards, are often incorporated to ensure safe operation. 11. Application in Size Reduction: - Double teeth roller crushers are effective in size reduction and are suitable for applications where precise control over the final product size is crucial. It's important to note that the specific design, features, and applications of double teeth roller crushers can vary among different models and manufacturers. When selecting or using this type of equipment, it's advisable to refer to the manufacturer's guidelines and specifications for proper operation and maintenance.

Condition: used, Year of construction: 2017, operating hours: 3,706 h, overall weight: 20,000 kg, Doppstadt DW 2060K Biopower - Year of manufacture: 2017 Iedpfxoz Idb Ne Anijtn - Engine: Mercedes-Benz OM 926 LA / 326 hp - AD BLUE system - Weight: 20,000 kg - Remote control - Humidification system - Rear conveyor belt, 5 m - Overband magnet - Tracked chassis - Roller: 2000 mm x 600 mm - Teeth: 24

Condition: used, Year of construction: 1997, Equipment: all wheel drive, Very nice wheel loader – ideal for storage areas, etc. Bucket with teeth, approx. 2.3 cubic meters Weight approx. 12.5 tons Itjdpfey U Szijx Anion With central lubrication system – interior and exterior in top condition! Bucket pivot point approx. 3.80 meters 6-cylinder engine 3-speed powershift transmission Tires approx. 70% good We can offer you transport to your location. Sale only to commercial businesses or for export. Sale as is, in the condition the machine is in. No guarantee or warranty. The mileage or operating hours stated are read from the odometer or hour meter; we do not guarantee the accuracy of this information! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided should not be considered as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense of a purchase agreement. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately if necessary. We will also gladly accept your vehicle as a trade-in. For further questions, please do not hesitate to contact us. For our customers from abroad, we will prepare all customs and export documents for a trouble-free transfer abroad.

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: MACH1097, For sale is a reliable and precise grinding machine from the leading French manufacturer, Forézienne (MFLS), designed for the automated and high-quality sharpening and profile restoration of band saw blades. Thanks to its precise CNC control, the machine ensures uniform geometry of the saw teeth, extends the service life of the cutting tools, and significantly reduces setup time. The machine is ready for industrial use, well-maintained, and suitable for both sharpening centers and the woodworking industry. Ijdpjzxpkmofx Anietn

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks Itodpfjz Tflhox Anien -Top jaws: soft top jaws for wedge bar chucks, helical teeth, 1 set -Jaw width: 20 mm -Attachment: Material steel -Dimensions: see photo technical drawing -Transport dimensions: 200/90/H85 mm -Total weight: 2.6 kg

Condition: good (used), Year of construction: 2021, Empty weight: 620 kg Dimensions of cargo space: 279 x 89 x 126 cm Technical condition: good Visual appearance: good Production country: NL Please contact Christian Theißen for more information Manufacturer: Vermeer Corporation Model: Stump Cutter SC362 Year of build: 2021 Condition: Used Data: Drive type: 35 PS Performance: 21,1 kW Fuel type: Benzin Itjdpfxoz R S I Ss Anion Number of milling teeth: 16 Milling height: 61 cm Milling radius: 119 cm Milling depth: 38 cm Transport dimensions LxHxW: 2,79 x 0,89 x 1,26 m Empty weight: 620 kg Special features: Caterpillar drive Price on demand Location: 41468 Neuss Available immediately

Condition: used, power: 328 kW (445.96 HP), first registration: 01/2023, Specification: Category: Universal Waste Shredder Manufacturer: Komptech Serial/Reference Number: 481148 Designation: Terminator 5000 S Year of Manufacture: 2023 Operating Hours: approx. 889 hours Power: 446 HP / 328 kW Weight: 27,000 kg Emissions Standard: Tier 4 Final / Stage V. Equipment and Description: Terminator 5000 S Diesel engine: CAT C13 Tier 4 Final/Stage V F-shredding unit Armoured rollers ? new sickle teeth Hydraulically adjustable cutting gap 0-45 mm Overbelt magnet Central lubrication Remote control Itodpfx Anoxqqfcsien

Condition: used, Year of construction: 2022, functionality: fully functional, tooth pitch: 100 mm, grinding wheel diameter: 125 mm, grinding wheel bore: 20 mm, We offer this used Iseli Swiss BNF 100, a fully automatic 4-axis surface grinding machine, manufactured in 2022. Manufacturer: Iseli Swiss Model: Fully automatic 4-axis controlled flank grinding machine for band saws in wet grinding version / Type BNF100 Year of manufacture: 2022 • Flank grinding machine for set, as well as stellite and carbide-tipped band saws • Full enclosure with intensive water cooling • Equipped with a 4-axis CNC control system • Each movement is individually controlled via servo motors, resulting in minimal idle times • The advanced saw tooth can be finished in a clamped position • Electrically controlled, central saw blade height adjustment • Height stop for precise saw blade positioning • Use of roller linear guides for the CNC axes (stiffer machine construction and significantly increased service life) • Pneumatic saw blade clamping • Pneumatic additional clamping to stabilize thin saw teeth, resulting in increased dimensional accuracy • Operation via touch screen / color display • Data can be retrieved via the control system (standard storage space for 99,999 data sets) • Metric or Anglo-American measurement system selectable (mm or inches) + Dust extraction and auxiliary feed Technical data BNF100 Flank clearance angle: 0 - 7° Tooth pitch: 13 - 100 mm Blade width standard: 75 - 360 mm Blade width optional: 25 - 360 mm Blade length standard: from 5,300 mm Blade length optional: from 4,300 mm Grinding wheel variant 1: Ø 100 - 125 mm Grinding wheel variant 2: Ø 75 - 100 mm Ijdjz E Spcepfx Anistn Grinding wheel bore: Ø 20 mm If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2011, • Cutting length: 4,200 mm • Motor: 11 kW (15 HP) • High cutting precision thanks to the free-standing, torsion-resistant steel frame and carriage guidance running on oversized, hardened and ground round steel rails. • Infinitely variable feed speed controlled by foot pedal over the entire cutting length. • Feed speed: 1–80 m/min • Saw spindle speed: 2,900 rpm Isdpfx Anszkkf Asistn • Maximum cutting height with Ø 600 mm saw blade: 190 mm • Maximum cutting height with Ø 400 mm saw blade: 90 mm • Rip fence and machine table. • Rip fence adjustment via multiple control levers on the front of the machine for precise positioning, with a large digital readout. The fence can be easily rotated and tilted. • Rip fence adjustment range up to 800 mm. • Control system o Electronic machine and fence control (PLC control) with an easy-to-read touchscreen. • Swivel-mounted control panel on a swing arm. • One 30 mW red laser for displaying the cutting line. • Fast and safe saw blade change using the "Easyfix" quick-clamping system. • Safety guard with automatic opening assisted by two gas springs. • One carbide-tipped saw blade: 450 × 4.4 × 80 mm, Z=40 teeth. • Saw blade bore diameter: Ø 80 mm. • Electrical equipment o Control cabinet integrated into the machine frame. • Connection data o Upper right extraction port: Ø 160 mm o Lower left extraction port: Ø 160 mm o Extraction air velocity: 30 m/s o Total air requirement: 4,340 m³/h o Compressed air supply: 6–8 bar • Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: refurbished (used), Year of construction: 2019, operating hours: 450 h, functionality: fully functional, type of input current: three-phase, total height: 2,836 mm, total width: 2,930 mm, total length: 2,500 mm, overall weight: 6,500 kg, empty load weight: 6,500 kg, Equipment: documentation/manual, Refurbished Optima 154 shredder. In very good condition - like new. Is a single shaft shredder of medium speed. Electric drive and hydraulic pendulum feeder, with low energy consumption. The pendulum feeder press the material against the rotor, equipped with fixed teeth that cut the material against anvil steels.
 The feeder, is operated by a last generation hydraulic system with proportional valve or hydraulic variable displacement axial piston pump.
 The process is set from software in the PLC. Key benefits: • Low electrical consumption. • Low dust and noise level. • Very simple maintenance. • It is not necessary with rotor cooling. Iodpfx Aj Aaraksniotn • Can process material down to 10mm in one step. • Technical availability from 96% to 98%. • Possibility to add water in the inlet. Shreds materials: 
 Industrial waste • Urban waste • Logs • Laminates • Bark • Wood waste • Paper • Craft • Plastic • Textiles. Is on a hook-lift platform, so easy to transport. New price Optima 154 shredder - aproximately euro 300 000,00

Year of construction: 2008, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6560308, Refurbished Kirschner LK 700 soldering unit. Machine for fully automatic soldering of carbide/PCD teeth onto circular saw bodies. All relevant attachments are NEW and can be documented with an invoice. Iedszltitjpfx Anijtn The machine can currently be inspected while powered on.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, 1 like-new manual plate seat re-grinding machine, Petschauer PLT800, with a cutting-off device for repairing HM teeth on circular saw blades with a diameter of 100 to 800 mm. This machine is equipped with a double grinding wheel holder and a double saw blade holder for 2 different applications. Right side: Re-grinding of the plate seat after unsoldering with a ceramic grinding wheel, 175 mm Ø and 4 mm wide, with an adjustment scale from 15° negative to 35° positive, with blade thickness adjustment. Left side: Cutting off teeth that are too long with a diamond cutting disc, 150 or 175 mm Ø, approximately 1 mm wide. Adjustment scale for back clearance angle, 15° negative to 35° positive. The cutting-off process is performed at a 0° axial angle. Additional applications: Setting the tooth back Setting the raker on CMT saw blades Breast grinding using a diamond grinding wheel Re-sharpening on the saw blade circumference at 0° Alternate tooth arrangement possible. Technical data: Saw diameter: Max. 800 mm Ø Weight without stand cabinet: 128 kg Dimensions: Width: 92 cm, Depth: 72 cm, Height: 58 cm Total power: 0.75 kW Drive speed: 2600 rpm Coolant tank: 60 liters Dimensions: Ceramic grinding wheel 175 mm Ø Itjdpfx Aozz Rlkonien Diamond cutting disc: 150 or 175 mm Ø Operating voltage: 230/400 Volt, 3 phases, 50 Hz or 230/440 Volt, 3 phases, 60 Hz Protection: 3 slow-blow fuses, 10 A

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, rotary table diameter: 900 mm, position of the milling head: Schwenkbar (35°), table diameter: 900 mm, total length: 6,000 mm, gear diameter: 1,200 mm, total height: 3,500 mm, total width: 3,900 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 725 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 1,000 mm, overall weight: 24,000 kg, distance table to spindle center: 780 mm, tool diameter: 280 mm, controller manufacturer: LH90, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A young Liebherr LC 1203 from the current LC generation: manufactured in 2009, with a motor milling spindle, capable of processing workpieces up to 1200 mm in diameter and weighing 9.5 tons, module 20 – the machine for large gears in gearbox manufacturing, wind power, mining, and heavy machinery construction. Serwema Retrofit Solutions, Chemnitz, optionally upgrades the machine to Siemens Sinumerik ONE, the latest control generation with full spare parts and support availability, and delivers it with a new, air-conditioned control cabinet manufactured in-house and a user-friendly interface. The mechanics remain in the well-maintained original condition with the original paint – a Liebherr from 2009 does not need a general overhaul, but a control system that will last for the next 20 years. Delivery time is six months from order. The machine mills spur and helical gears, as well as shafts up to module 20, in a reinforced version up to module 24, starting from a tooth count of 1 – including worm gears and special profiles. With 1000 mm of axial travel between the milling spindle axis and the table surface, long pinion shafts are securely clamped, and the 900 mm table supports 95 kN. The motor milling spindle rotates from 36 to 360 rpm, the milling head swivels by ±35°, and the tangential travel of 320 mm utilizes the full milling cutter length of 340 mm for long service life. Technical data: max. workpiece diameter 1200 mm, max. workpiece weight approx. 9.5 tons (table load 95 kN), table diameter 900 mm, distance between milling spindle axis and table axis 55–780 mm, distance between milling spindle axis and table surface 200–1200 mm, max. module 20/24, min. number of teeth 1, max. milling cutter diameter 280 mm, max. milling cutter length 340 mm, tangential travel 320 mm, milling cutter speed 36–360 rpm, max. table speed 12 rpm, swivel angle ±35°. Installation dimensions approx. 6.0 × 3.9 × 3.5 m, weight approx. 24 tons. Isdpfx Anez E Hx Soistn Scope of delivery: optionally, a new Siemens Sinumerik ONE control system with Sinamics S120 drives, air-conditioned control cabinet manufactured in-house, user-friendly interface with Serwema gear cutting software, machine enclosure, magnetic chip conveyor, circulating and loss lubrication, hydraulic unit, coolant system, operating manual. Original color scheme. Acceptance in Chemnitz together with you; a mechanical overhaul or geometry inspection according to DIN is offered additionally upon request.

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Itsdpsxx Tigjfx Anisn Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2010, operating hours: 10,468 h, Equipment: all wheel drive, Variable boom, twin tires, used vehicle. Vehicle no. 3439, Atlas 150W mobile excavator, year of manufacture: 2010, operating hours: 10,468, variable boom, air conditioning, Deutz diesel engine with 85 kW, tire size: 10.00-20, twin tires with spacer rings, dozer blade, radio, hydraulic connections for attachments, Lehnhoff MS10-3 mechanical quick coupler, 1 x TL 1,200 mm with teeth. For inquiries, please contact us. Errors and prior sale are subject to change. Isdpfszz Umlox Aniotn

Condition: excellent (used), Year of construction: 2005, operating hours: 6,701 h, functionality: fully functional, overall weight: 19,000 kg, Doppstadt DW2560 Buffalo/Shredder/Chipper/Crusher/Slow-Speed Machine • Manufacturer: Doppstadt • Type: DW2560 • Year of manufacture: 11/2005 • Magnetic tape • Operating hours: 6701 hours • Engine: Mercedes Benz OM 442 Diesel engine • Slow-speed machine • Roller length: 2.5 meters • Roller diameter: approx. 600 mm • Roller: 17 teeth • Discharge height: 2.9 meters • Throughput: material-dependent, in the range of up to approx. 30 t/h • Remote control • Rear discharge conveyor • Transport length: 20 m • Transport width: 2.51 m • Transport height: 3.95 m • Total weight: 19000 kg • German machine • Immediately ready for operation • This offer is non-binding and without obligation. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions. Itsdpfx Anszz Sn Tjien

Condition: used, Year of construction: 2023, New exhibition machine! List price €11,950 net • Equipped with a TERSA cutterhead for ultra-fast cutter blade changes • The TERSA cutterhead system enables particularly quiet operation • Helically toothed steel feed roller for consistent and uniform material feed • Material feed with two speeds via a separate motor • The particularly long planing tables facilitate easy and precise adjustment of the workpieces • Work tables are made of cast iron, annealed and stress-free, making them durable and permanently flat • Planing tables that open simultaneously towards the rear for short setup times • Planing table adjustment via handwheel with numerical display for planing height • The high machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Material removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helically toothed feed roller (ideal for economical planing of hardwood) • Quality - Made in Europe Equipment details: Tersa cutterhead • No more adjusting and screwing required • Cutter blade changes in seconds • Self-locking • Particularly quiet operation The material feed • Helically toothed steel feed rollers for a consistent and uniform wood feed without leaving marks • Several teeth engage simultaneously for powerful feed • Wear-free compared to rubber feed rollers Fixed dust extraction hood • Thanks to the fixed dust extraction hood, there is no need to change the dust extraction hose when retooling • This saves valuable working time Simultaneous opening of the planing tables • Simultaneous tilting of the planing tables with spring support for quick and convenient adjustment for thickness planing in seconds Thickness table adjustment • FS 41 elite s with thickness table adjustment via handwheel with integrated display • The thickness table is mounted on four large-sized spindles, which ensure maximum stability under all working conditions. • Thanks to the special lifting device, the table position remains perfectly maintained even without locking. Anti-recoil guards • Massive anti-recoil guards prevent workpieces from recoiling • The 4-cutterhead ensures an optimal planing result Anodized aluminum planing fence • Large-sized (1200 x 150 mm) • Easy to move • Adjustable from 90° to 45° via a scale • Supplied as standard with an auxiliary fence for safe planing of even narrow workpieces Technical description - Planer Overall length of the tables 2200 mm - Planer Working width 410 mm - Planer Material removal max. 5 mm - Planer Dimensions of the planing fence 1200 x 150 mm - Thickness Dimensions of the thickness table 775 x 410 mm - Thickness Working height min. 3 mm - Thickness Working height max. 240 mm - Thickness Feed speeds 6 / 12 m/min - Cutterhead speed 5000 1/min - Cutterhead diameter 95 mm - Number of cutter blades 4 pcs. - Electrical connection 400V / 50Hz - Motor power 5.0 kW - Dimensions (L x W) 2250 x 1440 mm - Dust extraction port diameter 1 x 120 mm - Weight 450 kg Iodpfxsz Ebpro Aniotn Storage location: Rieth

Condition: good (used), functionality: fully functional, Year of construction: 2010, We offer a variety of excavator buckets and trenching buckets with the VERACHTERT CW30 CW40 quick-change system (56cm between the "hooks"). Suitable for excavators from 20 tons upwards. All buckets are in good condition. 1x Mass excavation bucket with teeth, 145cm cutting width, 6 teeth CAT system, approx. 1.5 cbm 1x Foundation bucket, 100cm cutting width, 150cm digging depth, smooth cutting edge, approx. 1 cbm Iedpfxszuybbe Anijtn 1x Trenching bucket, humus bucket with hydraulic swivel motor! 210cm cutting width, top-quality product from "Rädlinger". (The rock bucket with the 3 teeth shown in the picture has already been sold). Total price for all 3 buckets together, net: €12,500. Collection in 96231 Bad Staffelstein / Upper Franconia / Northern Bavaria. Delivery can be arranged, subject to reimbursement of costs. If you have any questions or require further information, please send us a message or call us. We also have a Verachtert sorting grapple and a power tilt with a HYDRAULIC Verachtert quick coupler for sale; take a look at our other offers!

Condition: ready for operation (used), Year of construction: 1989, CSEPEL GEAR GRINDER FKA 326-10 – 2 units available THE MACHINE USES THE FASSLER DRESSING METHOD. Iodpfx Anezxzlijistn • Gear diameter: 320 mm • Module range: 0.5 – 6 • Slide stroke: 180 mm • Number of teeth: 10 – 260 • Max workpiece weight: 80 kg • Clamping length: 420 mm MACHINES ARE COMPLETE WITH NUMEROUS ACCESSORIES: WHEELS, WHEEL HOLDERS, FASSLER, CHANGE GEARS Machines are in working order!

Condition: new, Year of construction: 2025, Marble Ripper is designed by Galen engineers for marble block extraction. Fully made with wear resistant steels it is used to separate marble block. For detailed information please contact us Itodpfx Anov H Rw Ioien