Used Pulley for sale (403)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 24-042, overall weight: 200 kg, type of input current: AC, input voltage: 230 V, belt width: 400 mm, Magnet with neodymium head roller (can also separate slightly magnetized stainless steel parts), small conveyor belt (drum motor), and feed chute. Blodpfx Aez Ihbgeiasp The conveyor belt and feed chute are adjustable. The machine is mobile on rollers, available immediately, and the price may be negotiable.

Year of construction: 2020, operating hours: 5,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 25140, Equipment: CE marking, Secondary screen with two decks, 1200 x 2500 [mm], surface area 3.0 [m2], weight 1400 [kg], polyurethane mesh, square mesh 65 and 5 [mm]. Lateral tension, speed 900 [min-1], inclination 7°, 5.5 [kW] electric motor, pulley, V-belt, protective housing on the drive side and opposite bearing, compression springs. Machine sold without a frame. Upon request, we can manufacture a custom frame with chutes. Bjdpfsz Dkxyex Aiaslp

Condition: used, Year of construction: 2018, functionality: fully functional, total width: 1,500 mm, total length: 1,500 mm, type of input current: DC, overall weight: 360 kg, operating speed: 1,000 mm/s, The machine has only been in operation for 1 month. It is practically brand new. It includes a cutting and punching attachment and a 55x50 pulley. Bjdpfx Aijz Tbk Tsaelp

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: BL 201273, Completely overhauled on a new workbench, with new paint and belt guard, and a new headstock. Inventory No. 2240050, machine including: Bljds Ahxhijpfx Aiaop 1 NEW workbench 2000x800 mm with blue Urphen top 2000x800x50 mm      1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bench for overhead control 1 W-20 tailstock with geared reducer, complete with tightening key, overhauled 1 overhauled cross slide 1 overhauled aligned steady rest 1 380V/50Hz/3ph motor, 2 speeds 720/1420 rpm - 0.9/0.6 HP 1 tensioner pulley with pulley and belt 1 W-20 dead center 1 set of 37 W20 collets 1 1x3 jaw chuck Ø 100 mm on W-20 flange and additional jaw sets 1 TRIPAN tool holder set including: -1 type 111S turret with stud - 2 tool holders 131 - 1 tool holder 131b - 1 double tool holder 132 1 self-centering drilling chuck, capacity 1-13 mm on CM2 taper 1 CM2 dead center TECHNICAL CHARACTERISTICS: Capacities: - center height 102 mm - distance between centers, W-type headstock, standard 470 mm - distance between centers, W headstock with reducer 375 mm - diameter allowed above the bed 200 mm - diameter allowed above the cross slide 120 mm Bench: - height x width x length 160x100x1000 mm cast iron bench with rectified dovetail profile Headstocks: - spindle nose for collets W-20 - bar passage through collet 14.5 mm - headstocks with reducer, ratio 1:5 Cross slides: - travel of longitudinal tool slide 90 mm - travel of transverse tool slide 100 mm - tool dimensions 12 x 12 mm Tailstocks: - internal taper of tailstock spindle Morse 2 - spindle travel, controlled by screw and handwheel 80 mm The technical specifications are provided without guarantee, subject to errors and omissions.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 20190824, spindle diameter: 125 mm, total width: 1,600 mm, total height: 1,680 mm, total length: 3,040 mm, overall weight: 2,700 kg, spindle speed (max.): 6,800 rpm, workpiece height (max.): 100 mm, type of input current: three-phase, workpiece width (max.): 180 mm, input voltage: 380 V, table length: 2,000 mm, number of spindles: 4, power: 28.75 kW (39.09 HP), input frequency: 50 Hz, Description: -Solid construction cast iron and welded metal frame -Working table fully cromed to ensure firm advance of materials -side guide rollers for materials with pneumatic driving -professional cardan transmission for the feed system -feed speed up to 33m/min mechanically adjustable with mechanical variator with with elastic pulley -manual central lubrification pump -radial and axial adjustment of the working axes with mechanical displays for precise positions -electrical adjustment of working thickness -ergonomically positioned contro panel according UE standard Bsdpsz E H H Njfx Aiaelp -Hours:200 hours -Technical data: -electric connected load-21 kw -operating voltage:400v,50hz,3 phase -air required pressure:min 6bar -dimension: 3040x1600x1680mm - -weight:2800 kg -food table length:2000 mm -steplessly adjustable feed speed 8-33 m/min -axes diameters:40 mm - Ax1 - down: Ø125mm (Ø152mm channel cutter), 4kW -Ax2 - right: Ø115-170mm, 4kW - Ax3 - left: Ø115-170mm, 4kW - Ax4 – up: Ø105-150mm, 5,5kW -axis rotation:6800 rpm -advance engine power:3kw -dimension rolling advance: Ø140x35x50 mm -exhaustive dimension: 4x120mm Technical data of the material: -materials width: 20-180mm -material thickness: 8-100mm

Condition: used, Transnorm conveyor belt GF 13900-600-500 RA2450 Technical data: Conveyor length (NL): 13900 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Small 25mm pulley for low-gap transfer Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Bedjx H U Rqopfx Aiajlp Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 0710, power: 51 kW (69.34 HP), type of input current: three-phase, sieve perforation: 20 mm, input voltage: 380 V, Robust industrial CSB wood shredder, Woody K45 type, manufactured in 2015. Equipped with a hydraulic feed ram, discharge conveyor belt with a head pulley magnet, and discharge auger. Suitable for processing MDF, chipboard, solid wood, pallets, and various wood waste streams. ✅ Heavy-duty industrial design ✅ Hydraulic push ram for consistent feed ✅ Magnet roller for automatic removal of metal contaminants ✅ Complete line with conveyor belt and discharge auger ✅ PLC-controlled operation Bsdpfoz Dibaex Aiaolp ✅ CE-compliant machine

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, operating hours: 600 h, control type: CNC control, actuation type: electric, controller manufacturer: Lenze, controller model: SafanDarley E-Control, bending force (max.): 35 t, working width: 1,275 mm, stroke length: 300 mm, distance between stands: 1,375 mm, installation height: 1,000 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, number of axes: 7, table height: 100 mm, back gauge: 1,000 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 4,900 kg, total length: 2,250 mm, total width: 1,820 mm, total height: 2,515 mm, power: 0.011 kW (0.01 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, pressing force: 35 t, clearance between the columns: 1,375 mm, height adjustment type: electric, table width: 60 mm, Equipment: CE marking, safety light barrier, The E-Brake Premium 35t-1250 is the fastest servo-electric press brake on the market, manufactured by SafanDarley. Lenze servomotors controlled by frequency inverters from the same company enable fast and reliable operation of the system for many thousands of operating hours. The SAFANDARLEY E-Brake features a patented drive transmission method, which is implemented using reinforced belts. The roller system creates what is known as a multi-block or multi-pulley system. This principle has been known for years, but its successful implementation in SAFANDARLEY press brakes since 1995 has resulted in a press that is approximately 30% faster than hydraulic presses, quieter, more environmentally friendly, and eliminates the need for oil changes. Bledpfx Aijr Axxzeaop Parameters: SAFANDARLEY servo-electric press brake, model E-Brake 35-1250 - Pressing force: 350 kN (35 tons) - Stroke: 300 mm - Opening: Q = 690 mm - Accuracy of the upper beam: +/- 0.01 mm - Max. bending speed: 10 mm/s - Max. speed of the back gauge fingers: 350 mm/s - Max. reach of the back gauge fingers (third point of reference): 1000 mm - Connected power: 11 kW - Machine width: 2225 mm - Machine depth: 1820 mm - Machine height: 2550 mm - Weight: 4,300 kg - Servo-electric drive (without hydraulic system) SAFAN E-Control – numerical control system - Dual 21'' color split-screen touchscreen (The lower part of the screen enables programming, and the upper part allows viewing PDF documentation, DXF files, or a 3D visualization of the bending process) - Swivel arm - ELO Touch technology EC20 – 2D graphics program, overlay for the E-Control control system CNC axes: Y1, Y2 – CNC-controlled axes X – CNC-controlled axis deltaX – CNC-controlled axis R – CNC-controlled axis Z1, Z2 – CNC axes Safety light guard – programmable light curtain: Basic function – safety Interruption operation function – 1 cycle / 2 cycles Curtains can be disabled in safe mode WILA NSCL I HC upper adapter – hydraulic upper tool clamping system Safan OBS/3 table – lower tool mounting system, compatible with Wila/Trumpf or Amada tools, table with a width of 60 mm and a 13 mm groove Ergonomic package: cutout in the table for working in a seated position, ergonomic tables, ergonomic chair E-Bend S system – sheet thickness measurement system with automatic deflection correction The machine is in like-new condition. Inspection, testing, and presentation are possible on-site – Sosnowiec. Each unit undergoes a full technical inspection and quality testing by an authorized SafanDarley service center.

Condition: used, Transnorm conveyor belt GF 5650-600-500 Bedpfoy N E Thex Aiajlp RA2450 Technical data: Conveyor length (NL): 5650 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 41 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2022, operating hours: 1,850 h, functionality: fully functional, machine/vehicle number: 220, total length: 13,000 mm, total width: 5,700 mm, total height: 4,200 mm, overall weight: 37,000 kg, power: 404.52 kW (549.99 HP), TITAN 950 ARJES, in very good condition and with very few hours of use. Equipped with a shredding rotor and a magnetic pulley on the cross conveyor, this shredder completely removes ferrous materials. Bsdpfx Aiez D Dqcsaslp

Condition: good (used), Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set Blodpjzh U Dqefx Aiasp -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 420 mm -Item No.: 829676.44-01 -Groove width: 37 mm -Hole: Ø 70 x 55 mm -Quantity: 1x pulley available -Dimensions: Ø 420 x 50 mm -Weight: 20.1 kg

Condition: good (used), Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set Blodpfx Aijziay Toasp -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 330 mm -Groove width: 32 mm -Hole: Ø 110 x 45 mm -Quantity: 1x pulley available -Dimensions: Ø 330 x 45 mm -Weight: 18.2 kg/pc.

Condition: new, Involute gear cutters for SYNCHROFLEX timing belts: Involute gear cutters for SYNCHROFLEX timing belts: 3M GT, 56x60x22mm T16-25 Involute gear cutters for SYNCHROFLEX timing belts: 3M GT, 56x60x22mm T26-50 Bodpfjzvrupox Aiaolp Involute gear cutters for SYNCHROFLEX timing belts: 5M GT, 56x60x22mm T17-31 Involute gear cutters for SYNCHROFLEX timing belts: 5M GT, 56x60x22mm T32-79 Involute gear cutters for SYNCHROFLEX timing belts: 8M GT, 70x70x27mm T18-28 Involute gear cutters for SYNCHROFLEX timing belts: 8M GT, 70x70x27mm T29-89 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T12-20 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T21-45 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T46-80 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T13-17 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T18-25 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T26-40 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T41-R Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T12-15 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T16-20 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T21-45 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T46-114 Involute gear cutters for SYNCHROFLEX timing belts: T20 80x80x32 T15-20 Involute gear cutters for SYNCHROFLEX timing belts: T20 80x80x32 T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T10-14 Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T15-20 Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T12-15 Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T16-20 Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT20 80x80x32mm T15-20 Involute gear cutters for SYNCHROFLEX timing belts: AT20 80x80x32mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T11-16 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T17-31 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T32-79 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T80-200 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T18-R Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T41-89 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T90-200 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T41-89 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T90-R Involute gear cutters for SYNCHROFLEX timing belts: HTD20M 80x80x32mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD20M 80x80x32mm T41-R Involute gear cutters for SYNCHROFLEX timing belts: MXL 56x60x22mm T10-23 Involute gear cutters for SYNCHROFLEX timing belts: MXL 56x60x22mm T24-R Involute gear cutters for SYNCHROFLEX timing belts: XL 56x60x22mm T10-R Involute gear cutters for SYNCHROFLEX timing belts: L 56x60x22mm T10-R Involute gear cutters for SYNCHROFLEX timing belts: H 70x70x27mm T14-19 Involute gear cutters for SYNCHROFLEX timing belts: H 70x70x27mm T20-R Inv

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 1404, total width: 1,690 mm, total length: 3,410 mm, total height: 1,915 mm, overall weight: 3,000 kg, TECHNICAL DATA Capacity - Height of centres: 125/175mm - Distance between centers: 400mm; 700mm; 1025mm - Max.travel of longitudinal slide: 400mm; 700mm; 1025mm Table - Table speed steplessly adjustable: 0.5 - 5.5 m/min. - Reversal dwell of table: 0-6 sec. - Minimum automatic stroke approx.: 1.5mm - Maximum swivel of table: 400 deg.- 12 ; 700 deg. -10; 1025 deg.- 8 - Travel per revolution of handwheel: 25mm Workhead - Swivel towards grinding wheel: 90 deg. - Spindle speed, steplessly variable: 30 - 675 RPM - Spindle nose taper: Morse 5 - Collet shank diameter: 25mm - Diameter of 3-jaw chuck: 160mm Wheelhead - Grinding wheel L.H. or R.H.: - Diameter (special exec. 6.25kW/8.4 HP): 400 (450) mm - Maximum width: 50 (80) mm - Bore: 127 (203) mm Bjdpfoupiycsx Aiaolp - Spindle speeds (3-step Vee-belt pulley) - Grinding wheel dia 400: 1500/1625/1800/2000/2200/2400 RPM - Grinding wheel dia 450 (8.4HP): 1340/1500/1625/1800/2000/2200 RPM - Grinding wheel motor approx.: 3kW - Grinding wheel motor, special for 450 dia wheel approx.: 6.25kW - Rapid travel of wheelhead: - Hydr.approach and retraction: 40 mm - Additional adjustment with hand leveler: 210 mm - Swivel of the whole cross slide L.H. and R.H.: 45 deg. - Interminent feed, steplessly adjustable (on dia) at left or right hand table reversal, or both: 0.001 - 0.05 mm/sec. - Plunge feed, steplessly adjustable (on dia): 0.0002 - 0.1 mm/sec. - Maximum depth of plunge on dia: 1.7 mm Motor rating - Wheel spindle, standard: 3 kW - Wheel spindle special rating: 6.25 kW - Workhead: 0.55 kW - Hydraulics: 0.55 kW - Coolant pump, standard: 0.17 kW - Coolant pump, inteclon: 1.1 kW Workpiece weight - Maximum between centers: 80 kg Extras: grinding wheels, coilets, other additional equipment, user manuals

Condition: used, functionality: fully functional, cutting width (max.): 130 mm, Stenner VHJ band resaw, machine size 105, made by Stenner of Tiverton, one of the UK's most respected names in sawmilling machinery. It's a heavy-duty, cast-iron industrial resaw that has been used and maintained in a professional sawmill, with full records kept throughout its working life. Specification • Make / Model: Stenner VHJ, machine size 105 • Serial number: AB 7508 • Motor: 18.5 kW MEZ three-phase motor (type C180M04), 400V • Braking: Fitted with electric motor braking for fast blade run-down, in line with UK PUWER requirements for woodworking machinery • 3-phase supply required Bedpfxsz E Hknj Aiaelp Condition Fully operational. Last serviced 30 March 2026, with the next service not due until March 2027. Maintenance history • Regular documented safety inspections every year since 2016 • Professional servicing by specialist engineers, including services in 2022, 2023, 2024 and March 2026 • Wheels professionally refaced on site by Perman Stanley Ltd (saw pulley refacing specialists) in April 2023, with alignment and setup checked • Further service in December 2023 • Service and repair in April 2024 Copies of the service invoices are available to serious buyers. The written pre-operation checks, start-up and shutdown procedure, and safe operating procedure can be passed on with the machine. Included A number of sharpened blades, so the saw is ready to cut straight away. Collection Collection only. The buyer arranges transport and lifting equipment. (Assistance can be provided with removal, lifting and loading) Viewing welcome by appointment, and you're welcome to see it running under power. Please ask any questions before bidding.

Condition: excellent (used), Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set Blsdpozh U N Tofx Aiasp -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 260 mm, unused -Groove width: 24 mm -Hole: Ø 50 x 45 mm -Number: 2x pulley available -Price: per piece -Dimensions: Ø 260 x 45 mm -Weight: 6.6 kg/pc.

Condition: good (used), V-belt pulley, belt pulley, double wheel pulley, variable pitch roller, V-belt pulley with variable pitch Blsdpoymb Emofx Aiaep -V-belt pulley: Roller V-belt pulley with variable belt width -Adjustment range: 17 - 35 mm -Hole: Ø 28 mm -Dimensions: Ø153 x 72 mm -Weight: 5.1 kg

Condition: ready for operation (used), Year of construction: 1986, operating hours: 1,200 h, functionality: fully functional, total height: 1,520 mm, total length: 2,580 mm, total width: 1,440 mm, workpiece weight (max.): 200 kg, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,500 rpm, feed length X-axis: 2,120 mm, feed length Y-axis: 250 mm, feed length Z-axis: 150 mm, type of input current: AC, grinding wheel diameter: 250 mm, overall weight: 3,730 kg, grinding length: 280 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 2,600 rpm, center height in crank: 115 mm, center height: 115 mm, collet bore: 55 mm, grinding spindle speed: 2,600 rpm, feed rate X-axis: 12 m/min, pivoting range: 45 °, travel distance X-axis: 2,120 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 150 mm, center width: 280 mm, grinding spindle motor power: 3,000 W, table length: 2,800 mm, table width: 250 mm, power: 6.5 kW (8.84 HP), height adjustment type: mechanical, workpiece diameter (max.): 235 mm, grinding diameter: 250 mm, input frequency: 50 Hz, disc diameter: 250 mm, input voltage: 380 V, space requirement width: 1,440 mm, space requirement length: 2,580 mm, space requirement height: 1,520 mm, grinding wheel speed: 2,100 rpm, distance table to spindle center: 362 mm, tool diameter: 235 mm, workpiece length between centers: 280 mm, distance between centers: 280 mm, Hob Sharpening Machine 33C (ZZS) 3A662 (Gear hobbing cutter grinding machine) The 33C (ZZS) model 3A662 is a specialized hob sharpening machine designed for precise sharpening and regrinding of gear hobs and gear cutting tools. Manufactured by 33C (Soviet Union), this machine is intended for industrial tool rooms and gear manufacturing facilities requiring reliable accuracy and repeatable grinding quality. The machine is suitable for sharpening hobs with a maximum diameter of 235 mm and a maximum length of 280 mm. It supports hobs with 4 to 30 flutes and allows grinding of straight and helical flutes with a helix angle range from 0° to 45°, covering a wide range of gear cutting applications. The grinding spindle is designed for grinding wheels with diameters from 200 to 250 mm. Spindle speed is adjusted via step pulleys and offers four speed stages: 1500 / 1900 / 2100 / 2600 rpm, ensuring flexibility for different tool sizes and materials. The machine is equipped with a dividing mechanism and supplied with a complete set of change gears, allowing accurate indexing during the sharpening process. A hydraulically driven table provides smooth longitudinal movement and stable grinding conditions. Bljdpfx Ajx Nprbeiajp With overall dimensions of approximately 2580 × 1440 × 1520 mm and a machine weight of about 3730 kg, the 3A662 features a rigid and robust construction, providing excellent vibration damping and long-term operational stability. The machine operates on three-phase AC power (380 V / 50 Hz) and is supplied with original factory documentation. Key Features: *Specialized hob sharpening machine *Max. hob diameter: 235 mm *Max. hob length: 280 mm *Number of flutes: 4 – 30 *Helix angle range: 0° – 45° *Grinding wheel diameter: 200 – 250 mm *Grinding spindle speeds: 1500 / 1900 / 2100 / 2600 rpm *Hydraulically driven table *Dividing mechanism with full set of change gears *Rigid industrial construction (approx. 3730 kg) *Original technical passport and manual (Russian) Typical Applications: *Sharpening and regrinding of gear hobs *Maintenance of gear cutting tools *Tool room operations in gear manufacturing *Repair and refurbishment of worn hobs *Small- and medium-series gear production support

Condition: used, functionality: fully functional, machine/vehicle number: WDB4371251W199327, mileage: 3,18,533 km, power: 177 kW (240.65 HP), first registration: 07/2002, fuel type: diesel, empty load weight: 7,300 kg, overall weight: 7,500 kg, tire size: 395/85 R 20, axle configuration: 4x4, brakes: engine braking, color: white, gearing type: mechanical, number of seats: 3, total length: 7,170 mm, total width: 2,410 mm, total height: 3,500 mm, permissible axle load (axle 1): 4,400 kg, permissible axle load (axle 2): 4,400 kg, Year of construction: 2001, operating hours: 4,765 h, Equipment: ABS, parking air conditioner, Unimog U1550L Expedition Vehicle First registration: 07/04/2002 Mileage: ≥ 318,000 km Operating hours: ≥ 4,700 h Total weight: 7,500-8,500 kg depending on load Engine: 176kW / 240 hp, Euro 2 Tires: 395/85 R 20 - Michelin Asking price: €139,800 Special equipment Unimog: A27 Double sealing of wheel hub, for use in muddy conditions A30 Tire pressure control system A31 Wheel-side, wheelbase-dependent parts for tire control B02 ABS B28 Mechanical quick-release device for spring storage cylinders C22 STABILIZER SEAL FRONT AND REAR C34 Anti-slip coating on bumpers D65 Mounting parts for external superstructures E35 Circuit breaker instead of fuse F06 Higher cab roof (by 120mm) F44 ADDITIONAL VENTILATION F50 SOUND AND HEAT INSULATION FOR CAB G22 Auxiliary gearbox with off-road gear G50 Transmission oil cooler G73 SHIFTING DAMPER (SHIFT LEVER - TRANSMISSION) Bjdpfx Asz S Ni Isiaslp H02 Single-circuit hydraulic system H11 HYDRAULIC SYSTEM 1-CELL H71 HYDR. PLUG-IN CONNECTION FRONT 2-WAY, CELL 1 J24 Tachograph, 2 drivers, outside EU J29 Speed-dependent engine speed compensation (measurement result / warning sign) L02 Outline lights to the front, white L18 Fog lights, halogen, suitable for wading L25 Rear fog light L30 Stone guard grille for headlights L30 Headlight stone guard L35 Headlight beam adjustment L41 ADDITIONAL TURN SIGNALS L71 Side marker lights with integrated reflectors M02 EURO II ENGINE M03 Increased engine power M31 AIR COMPRESSOR WITH HIGHER OUTPUT M53 Fuel preheating M78 Engine number stamping M86 PULLEY AND VIBRATION DAMPER WITH COMBINATION RING M91 ELIMINATION OF START PILOT R27 Disc wheels 11x20 super S21 Three-point automatic safety belts S26 Windshield electrically heated, laminated glass S26 Electrically heated windshield, laminated glass S39 Power windows (left and right) S46 2 Outside rearview mirrors, heated, electrically adjustable S50 First-aid kit S82 Wide-angle mirror S83 Ramp mirror X18 Increased load capacity level UNICAT Expedition Mobile Superstructure: - Pneumatically sprung Recaro seats, adjustable, heated and ventilated - Robust GRP box body, wall thickness approx. 60–100 mm, waterproof and dustproof; designed for temperatures from -40 °C to +40 °C - Four-chamber fuel tank system with a total of 560 liters of diesel - Solar system on the roof and extensive on-board electrical system with a central control panel - 310 l fresh water tank, 80 l waste water tank, 22 l hot water boiler via heat exchanger and drinking water filter system - Kitchen with refrigerator, freezer, sink, hot and cold water, three-burner propane stove, oven and storage compartments - Sleeping area with a double bed, cabinets, mirror, reading light and storage space - Bench seat, can be converted into an additional sleeping space for a third person - Bathroom with porcelain toilet and flushing, washbasin, mirror cabinet and shower - Outside shower and outside water connection - Awning - Rear bicycle carrier, roof rack with spare wheel - Additional front headlights with protective grille - Winch at the front and rear - Ball hitch K50 Offer subject to change. Errors, changes and prior sale are reserved. All information without guarantee. Our general terms and conditions apply. Location: Peter Meineke GmbH Becklinger Straße 17 29683 Fallingbostel Viewings and/or test drives only by prior appointment. Please coordinate by telephone before arriving, as the vehicle/device may not be at the specified location. Contact: Ewgeni Schneider Mobile: +49 (0) 173 / 9903073

Condition: excellent (used), Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, rope roller cover set, unused, original packaging -Type: 2/1 2m -Item No.: 82930533 -Lid: Dimensions 450 x 450 mm -Quantity: 2 sets available -Price: per set -Transport dimensions: 460/460/H120 mm -Weight: 11.5 kg/set Blsdpfx Aiszhtadoasp

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: 82944644, Demag DH1000 cable pulley for bottom block 2/1 or 4/1 Version. Cable diameter 20 mm Sheave diameter 450 mm Bljdsv Iq Agspfx Aiaep Bearings 6018ZX Demag number 82944644 Price is per piece! ( Demag new price € 3175.- ) Condition New 2 pieces in stock.

Condition: good (used), Crane block, pulley, rope pulley, steel rope pulley, rope pulley for crane, pulley block, rope pulley with pulley block, wire rope pulley block, crane rope, four-rope multi-shell grab, polyp grab, mechanical multi-shell grab, shell grab, ship unloading grab, scrap grab, garbage grab, rope grab, digging grab -Rope pulley: Rope pulley 1 grooved Ø 570 mm -Groove width: 50 mm -Hole: Ø 110 x 80 mm Bjdpfxev Hmrns Aiaelp -Number: 4x pulley available -Price: per piece -Dimensions: Ø 570 x 80 mm -Weight: 42 kg/piece

Condition: excellent (used), V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing Blsdom T Ahlopfx Aiaop -V-belt pulley: pulley with 10 grooves, unused -V-belt width: 22 mm -Taper bushing recording: Ø 100 x 100 mm (can be changed) -Dimension: Ø325 x 265 mm -Weight: 66 kg

Condition: ready for operation (used), Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Bodpfx Aieyyqnleaolp Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: new, as new and unused, ex-stock, 6 units available, unit price €500 Bedpfxeyc Em Te Aiajlp