Used Stanko 1A616 for sale (40)

Condition: used, Year of construction: 1980, sheet width 2050 mm plate thickness 8 mm electrical . weight of the machine ca. 6,3 t Kjdpfx Aokxhrhshhodr +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1973, functionality: fully functional, pressing force: 1,250 t, stroke length: 220 mm, table width: 260 mm, table length: 820 mm, throat depth: 700 mm, total length: 6,400 mm, total width: 4,365 mm, total height: 3,760 mm, overall weight: 1,35,000 kg, operating pressure: 7 bar, pressure: 7 bar, Upset slide nominal force: 12 500 kN /1 250 ton/ Maximal diameter of work piece: 140 mm Maximal diameter of upset flange: 180 mm Upset slide stroke: 460 mm Slide continuous idle strokes in minute: 35 Electric motor power: 75 kW Overall dimensions: - L-R: 6 400 mm - F-B: 4 3650 mm - Height: 3 760 mm Kdsdpfx Asuby N Dehhsr Total weight, circa: 135 000 kg.

Condition: good (used), Manufacturer: STANKO Type: 7D430 Year of manufacture: 1994 Table rotation 360° Head tilting possible up to 10° Big cabinet with slotting key way tools Lubrication Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø 630 mm Table load 1000 Ram displacement 320 mm X - Axis 650 mm Y - Axis 510 mm Outreach 500 mm Number of strokes 3 - 38 m/min min. Power 12 kW Dimensions (estimated) Length 3000 mm Kjdpjwpud Ajfx Ahhjdr Width 2200 mm Height 3000 mm Weight 6150 kg Please note: The information on this page was provided to the best of our knowledge and ability by us, and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation and contractual terms. We recommend that you verify all important details.

Condition: used, Year of construction: 1972, Dreh-Øüber Bett 400 mm Dreh-Øüber Support 220 mm turning length 1000 mm spindle turning speed range 12,5 - 2000 U/min Kdodsvzhhyopfx Ahhsr spindle taper Bajonett 55022 spindle bore 47 mm feeds - longitudinal 0,07 - 4,16 mm/U feeds - cross 0.035 - 2,08 mm/U thread - mm pitch mm thread - inch 2 - 24 Gang/ inch. rapid travel - longitudinal/face 3,4 / 1,7 m/min spindle drive 11 kW power capacity 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, • 4-jaw chuck Ø 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992

Condition: used, Year of construction: 1981, Technical details: grinding diameter: 240 mm grinding length: 700 mm centre height: 125 mm table length: 1525 (schwenkbar) mm distance grinding spindle - table min./max.: 225/410 mm Ksdou Ng Avopfx Ahhodr rpm speed range - grinding wheel: 1590 U/min grinding wheel dia. (unused wheel): 600 mm grinding wheel dia. (used wheel): 450 mm cutting speed: 50 m/s total power requirement: 13 kW weight of the machine ca.: 5,5 t space requirements of the machine approx.: L:2,8xB:2,2xH:1,8 m Cylindrical grinding machine, semi-automatic operation - grinding spindle head -adjustment 185mm - grinding spindle head-infeed 0,001-0,05 mm/min continuous - rotation workpiece 50-500 rpm continuous machine is equipped: - sleeve with hydr. retraction - cooling device - trueing device - grinding wheel balancing - transverse delivering device for grinding spindle head - hydr. adjustment of grinding table. Upper table swivable. Documentation i.D. *

Condition: good (used), Manufactured by: Stanko Kedpfx Ahjv S Ukvohedr Tilt table Table size: 560 x 560 mm Design: 400 mm Maximum cutting height: 240 mm Belt length: 3150 mm Adjustable speed

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm Ksdpfx Aou N D Rqohhjdr - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: used, Year of construction: 1979, Technical details: throat: 410 mm dimension machine xH: 1,15m x 0,8m x 2,0m m Vertical band saw with saw band welding device. The table is tiltable. * Kdodpsu Niu Usfx Ahhsr

Condition: ready for operation (used), Year of construction: 1978, Drilling capacity Ø 50 mm, table size 1000x1640 mm, spindle nose MT-5, quill stroke 400 mm, quill Ø 80 mm, outreach 1755 mm, nose to table 450-1600 mm, 21 speed 20-2000 rpm., motor 4 KW, 12 feeds, dimensions 2700x1100x3430 mm, weight ca. 4800 kg Kdeded Sw N Aspfx Ahher

Condition: excellent (used), Steel holder inserts Make Stanko/Sedin Kodpfx Ajvmf Axshhsdr Data, see pictures

Condition: used, Technical details: weight: 150 kg dimensions: L:280 x B:240 x H:180 / pro Pratze mm Ksdpfxou N E Aze Ahhedr These 4x clamping claws are for sale. Used as workpiece clamps for turning and drilling work Cast steel construction Workpiece holder: Clamping surface WxH: 70 x 65mm, internal and external clamping, clamping stroke 250mm Foot mounting: Surface L x W: 280 x 240mm, 4x clamping screw M24 Equipment 4x slotted screw per clamping claw and socket spanner for square 24mm *

Condition: new, Year of construction: 2026, Machine in LIKE-NEW condition! Geometry inspection according to DIN 8609 12-month warranty for all damages Control system: conventional / Siemens PLC with rotary table control 4-axis digital display from Fagor / ACU-RITE or Heidenhain Complete electrical equipment 230/400 V, 50 Hz, German manufacturer, CE standard Technical data: Max. workpiece dimensions: - Diameter mm 3200 - Height mm 1600 (up to 2600 possible*) Kedpfx Ahecht Tnohjdr Max. workpiece weight kg 16000 Rotary table diameter mm 2800 Max. travel length - horizontal mm 1720 - vertical mm 1200 Number of steps for rotary table indexing 18 Rotary table speeds Siemens PLC or stepless (2 steps) Lenze control rpm 1.6-63 / 0-80 Support working feed: number of steps 18 Speed of cross slide adjustment mm/min 360 Max. support rapid traverse speed mm/min 2000 Max. rotary table torque kN/m 67 Power of main drive kW 55/75 Dimensions (L x W x H) mm 5490 x 7075 x 5100 Weight kg 43,000

Condition: used, Universal boring head STANKO Spindle tool, spindle head Tool holder: SK 40 - M16 Adjustment bushing holder: Ø 36 mm Kdedpjxciv Dofx Ahhsr Adjustment range: 17.5 mm Adjustment accuracy: 0.01 mm Tool shank: Ø 18/22 mm Machining diameter: approx. 10-45 mm - Adapter SK40 to adjustment bushing Ø 36 mm - Boring head with adjustment bushing shank Ø 36 mm Net weight: 5 kg Very good condition

Condition: used, Keyway milling head for milling machine, milling head, CCCP / USSR STANKO Type 1502 No.: 200 Year of manufacture: 1974 Stroke size: max. 60 mm Kedpfx Ahsd Dk A Ashjdr Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is the same as for the standard vertical head, driven by the machine gearbox - Drive via a drive pin, centered within the centering diameter - Graduated scale on the flange plate, +/- 45° infinitely adjustable - This keyway milling head is flanged in place of the standard vertical milling head (Mounting in place of the vertical milling head) Weight: 42 kg Good condition Keyway milling head, bearing number 58166, and vertical milling head, bearing number 58164, from an identical STANKO milling machine.

Condition: excellent (used), spherical roller bearing Kodob A Iq Sspfx Ahhsdr -Bearing type: Spherical roller bearing -Bore: Ø 110 mm -Outer diameter: 200 mm -Width: 53 mm -Weight: 7.5 kg