Used Angel Antoni for sale (80)

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Type: ACS WZH10-4080-2 BT Angelantoni Walk-in Climate Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: Itodpfsyyvwxsx Aaysf For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and features enhanced safety equipment specifically for battery and accumulator testing (e.g., lithium-ion). Special Feature: Safety Equipment for Battery Testing: The system is specially equipped for battery and accumulator tests, including: - Pressure relief flap for controlled release of pressure in the event of a malfunction - Gas warning system for early detection of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research testing - Endurance, ageing, and stress tests Technical Data (from nameplates & documentation): General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climate chamber, double-door Test Range: Temperature: –40 °C to +80 °C Humidity: 10% to 95% RH Electrical Data: Supply: 400 V, 3-phase + N + PE, 50 Hz Nominal power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit resistance: 10 kA Refrigeration System: Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: Dimensions (external, approx.): Length: ~ 4.5 m Width: ~ 2.2 m Height: ~ 2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Type: ACS WZH10-4080-2 BT Angelantoni Walk-in Climate Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and features enhanced safety equipment specifically for battery and accumulator testing (e.g., lithium-ion). Special Feature: Safety Equipment for Battery Testing: The system is specially equipped for battery and accumulator tests, including: - Pressure relief flap for controlled release of pressure in the event of a malfunction - Gas warning system for early detection of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research testing - Endurance, ageing, and stress tests Technical Data (from nameplates & documentation): General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climate chamber, double-door Test Range: Temperature: –40 °C to +80 °C Humidity: 10% to 95% RH Electrical Data: Supply: 400 V, 3-phase + N + PE, 50 Hz Nominal power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit resistance: 10 kA Refrigeration System: Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: Dimensions (external, approx.): Length: ~ 4.5 m Width: ~ 2.2 m Height: ~ 2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone. Itodpfsyyvrvsx Aaysf

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Type: ACS WZH10-4080-2 BT Angelantoni Walk-in Climate Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and features enhanced safety equipment specifically for battery and accumulator testing (e.g., lithium-ion). Isdpfeyg I Eyex Aaystf Special Feature: Safety Equipment for Battery Testing: The system is specially equipped for battery and accumulator tests, including: - Pressure relief flap for controlled release of pressure in the event of a malfunction - Gas warning system for early detection of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research testing - Endurance, ageing, and stress tests Technical Data (from nameplates & documentation): General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climate chamber, double-door Test Range: Temperature: –40 °C to +80 °C Humidity: 10% to 95% RH Electrical Data: Supply: 400 V, 3-phase + N + PE, 50 Hz Nominal power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit resistance: 10 kA Refrigeration System: Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: Dimensions (external, approx.): Length: ~ 4.5 m Width: ~ 2.2 m Height: ~ 2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: used, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use Incl. PC, software & technical documentation For sale is a professional battery test system, consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation Itedpjxuqk Hsfx Aayef The system is fully functional, well-maintained, and ideally suited for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: - Manufacturer: Keysight / Scienlab - Model: SL1001A - Year of manufacture: 2020 - Voltage / Current / Power: 80 V / 600 A / 24 kW - Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m - Weight: approx. 700 kg - Function: Charging, discharging, and cycling of battery modules - Condition: Very well maintained, laboratory use only Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: - Manufacturer: Angelantoni Industrie S.r.l., Italy - Model: DM500 C 10 ESS SPEEDY BT SP - Year of manufacture: 2019 - Weight: approx. 1,225 kg - Temperature range: -70 °C ... +180 °C - Humidity range: 10 ... 98 % rH - Refrigerants: R449A + R23 - Pressure ranges (PS Hi/Lo): 28 bar / 8 bar - Wi-Fi integrated - CE certification present - Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m - Function: Temperature and humidity testing, ESS (Environmental Stress Screening) - Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A - Max. power consumption: 32.5 kW Monitoring / Sampling Unit: - Dimensions: 0.6 × 0.5 × 0.2 m - Measured variables: Cell voltages, current, temperature - Interfaces: CAN, Ethernet - Compatible with Scienlab / Keysight PathWave software PC + Software + Documentation: - Industrial PC with control and measurement software - Enables automated test runs, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total system L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifespan analysis of battery modules (e.g., Li-ion, LFP, NMC) - Fast charging and cycle tests - Environmental simulation for temperature and humidity - Research, industrial, and university laboratories Important Note: "The table shown in the photos is not included in the sale." Scope of Delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring/Sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see image) (Specifications and data are subject to change and error!) For any further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2000, Angel ES 500/125 HL Closing 125 TO Itedpfxjh R T Slj Aaysf Year 2000 Scrow 45mm Spray weight 318 cm3

Year of construction: 1999, condition: excellent (used), Electronic cards Cc100 - Angel year 1999 PS244 PD242 CU 201 CU 211 DO 321 Di 325 AR 281 SR 161 Isdpfx Aaehgka Aoystf BC 082 OUTPUT TT 081

Condition: excellent (used), Year of construction: 1999, Engel robot Year of manufacture: 1999 Iedpfx Aaoxxdhteyetf With Plus control cabinet

Year of construction: 1988, condition: used, Engel display, year of manufacture approx. 1988 Itjdpfxoxuu Uce Aayjf

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Isdpsdcmdlofx Aayjtf Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Year of construction: 2002, condition: good (used), Complete Desoutter screwdriver system consisting of: 1 x Transducer controlled angle screwdriver Desoutter ERA40J Art.Nr .: 6151650800 Torque range: 8 to 40 Nm Output: 3/8 " Number of revolutions. 900 min-1 Length: 458 mm Weight: 2.1 kg 1 x Transducer controlled angle screwdriver Desoutter ERA60J Art.Nr .: 6151650810 Torque range: 15 to 60 Nm Output: 3/8 " Number of revolutions. 570 min-1 Length: 469 mm Weight: 2.2 kg 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Moeliche screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 2 x motor cable for hand screwdriver 5 m length Art.Nr .: 6159170720 Itjdjdcmizspfx Aayof 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: excellent (used), Year of construction: 1995, CNC lathe AVM Angelini Type Snupy E 415 Year of manufacture 1995 CNC control Fanuc 21 i-T Swing diameter 415 mm Turning length 600 mm Speeds up to 4500 rpm Spindle power 15 kw Itsdpfxovt U H He Aaysf Revolver 11-way Ejector collecting device Tools Motorized automatic tailstock Tools Weight 4 tons

Condition: excellent (used), Year of construction: 2003, CNC lathe Angelini Oscar, built in 2003; GE Fanuc Series 21i - T Permissible diameter on the slide: 320 mm Recommended turning diameter: 220 mm Maximum turning diameter: 320 mm Turning length with chuck: 600 mm X-axis travel: 270 mm Z-axis travel: 720 mm C-axis 12x -VD30 X-axis rapid traverse: m/min 24 Ijdpjvt U Hyefx Aaystf Z-axis rapid traverse: m/min 32 Spindle nose: ASA 5" Spindle bore: 61 mm Bar capacity: 52 mm Spindle motor power: kW 15 Maximum spindle speed: 4,500 rpm Hydraulic chuck diameter: 210 mm Tailstock quill diameter: 70 mm Tailstock quill stroke: 190 mm Collet chuck Dimensions: 402 x 130 x 199 h cm Weight: 4,500 kg Accessories: various holders and driven holders

Condition: ready for operation (used), Diameter range: 52 – 108 mm Height range: 38 – 178 mm Itodpfxsyzy Ans Aaysf Production capacity: 150 c.p.m. Number of heads: 4

Condition: ready for operation (used), Diameter range: 52 – 108 mm Height range: 38 – 178 mm Production capacity: 150 c.p.m. Number of heads: 4 Ijdpfx Aaoyzyvusyetf

Condition: ready for operation (used), Altezza punte sul banco mm 340 Distanza tra le punte mm 3000 Passaggio barra mm 65 Itedpfx Ajwqfkceayof Diametro max. ammesso sul banco 680mm torretta tipo C fornita di cartelle Fissa lunette Mandrino PINTO

Condition: good (used), functionality: fully functional, Diameter range: 99 mm - 178 mm Height range: 89 mm - 254 mm Iedpfxetqmv De Aayetf Production capacity: up to 150 c.p.m. Tooling for approx.: 99 mm (401) or 153 mm (603)

Condition: ready for operation (used), Diagonal min.: 57 x 70 mm Diagonal max.: 95 x 122 mm Height range: 76 mm – 280 mm Iedpeyyq N Asfx Aayotf Production capacity: up to 300 pcs/min.

Condition: new, functionality: fully functional, Equipment: tail-lift, DE ANGELIS 3S425 semi-trailer, GVW 42,500 kg, 13 tyres, size 245/70R17.5’’ Vehicle equipped with: - Hydraulic loading ramps, 4.00 x 0.85 m, wood-covered (non-sliding) - Electrohydraulic control unit - 1 stainless steel toolbox 600x600x300 mm (Fosso side) - Gigant axles - Air suspension - 3rd axle steering - Ring kit - 200 mm high aluminium sideboards on gooseneck TAILORED FINANCING OR LEASING PACKAGES AVAILABLE ON SITE. FROM 24 UP TO 96 MONTHS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL – NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A. – EBOLI (SA) OFFICIAL DEALER Itsdsydcyyspfx Aayof MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY–FRIDAY 8:30–19:00, SATURDAY 8:30–14:00 WE OFFER A WIDE RANGE OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder–770s – Limited Edition – 660 S Semi-trailers – Refrigerated Semi-trailers – Tipper – Lamberet – Schmitz – Isuzu – Fixed Bed – Crane – Tipper – 4 Axles – Tway – T-Way 540–460 hp – Xway – X-Way – Three-Sided Tipper – V8 – Scania – Frost Edition – Curtain Sider – Box – Tail-lift – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl disclaims any responsibility for possible discrepancies in technical specifications, options and features that may in some cases differ from those indicated in the description. Please verify the specifications of the specific vehicle.

Condition: ready for operation (used), Diameter range: 50 mm - 108 mm Height range: 38 mm - 197 mm Production capacity: up to 500 c.p.m. Itodpfxjtqmryj Aayof No. of heads: 6

Condition: good (used), Year of construction: 2007, functionality: fully functional, 10 cup wheels vertiocal glass edging machine glass thikness : 3 - 30 mm Isdjyhpqaspfx Aayetf min. glass size : 50 x 50 mm max. glass weight : 1000 kg working height : 812 mm total power : 16,3 Kw water tank capacity : 422 L working speed : 0,5 - 5,5 m/min. weight : 2890 kg The machine has worked with a flocculant . 62000 working meters

Condition: ready for operation (used), A conventional lead and feed screw lathe Antonio Anslemi is available. Center height: 260mm, center distance: 1500mm, swing diameter over bed/support/gap bed: 520mm/320mm/670mm, bed width: 370mm, speed: 1400rpm, tailstock quill diameter: 65mm, tailstock stroke: 240mm, machine dimensions X/Y/Z: approx. 3000mm/1200mm/1500mm, weight: approx. 2500kg. An on-site inspection is possible. Itedpfeyvixujx Aayef

Condition: ready for operation (used), output 5,5 kw voltage 400 V Itedpoylp Aksfx Aayof B3 Electric motor Cantoni 20G40C32P0DG0004 3~Motor 2SIE1 32M6B

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 147144, rotational speed (min.): 1,488 rpm, rotational speed (max.): 1,488 rpm, input voltage: 3,80,660 V, input frequency: 50 Hz, input current: 623 A, type of input current: three-phase, overall weight: 2,190 kg, total length: 1,860 mm, total width: 750 mm, total height: 1,000 mm, type of cooling: air, protection type (IP code): IP55, We offer this EMIT Sh 355 M4Ds electric motor, in very good condition, year of manufacture 2001. Type: Sh 355 M4Ds Serial number: 147144 Year of manufacture: 2001 Power: 350 kW Itsdpeyr Drtjfx Aayef Rotational speed: 1488 rpm Frequency: 50 Hz Rated voltage (Δ/Y): 380/660 V Rated current at Δ: 628 A Rated current at Y: 361 A Power factor cosφ: 0.88 Insulation class: F Protection class: IP55 Operating mode: S1 Maximum ambient temperature: 40 °C Weight: 2,190 kg MOTOR UNUSED The price quoted is net, excluding VAT. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 2007, Hangcha forklift CPCD 80-RW14, 8 ton lifting capacity, with side shifter and automatic fork adjustment. Very good condition, technically perfect, from second owner. Original operating hours only 1170, year of manufacture 2007. 6-cylinder Isuzu engine, dry and flawless. Engine starts immediately, even at minus 10 degrees Celsius. New service, new rear tires. Lifting height 4m, overall height 3.2m, fork length 1.8m; including fork extensions to 2.8m. Lighting, indicators, etc. With cabin, air conditioning, heating – everything works. Own weight 11,490 kg. Ijdeyk Hwvopfx Aayetf

Year of construction: 2017, operating hours: 1,752 h, condition: excellent (used), functionality: fully functional, Calender Monti Antonio 72-3600 + Plotter Mimaki JV5 320s Calender Monti Antonio 72-3600 Calender in very good technical condition, regularly lubricated. Cylinder diameter: 200 mm Material width: 3,200 mm Required pressure: 6-8 bar Speed: 0.1 - 1.7 m/min Max. temperature: 230 °C Itsdpfst Rhmkox Aayef Maximum power consumption: 19 kWh, average consumption: 13 kWh Operating hours: 1752h Meter reading: 58104m Included with the calender is the graphic printer plotter Mimaki JV5-320s: The machine is in very good technical condition, all nozzles are open, regularly cleaned. On 07/07/2023, all print heads and accessories were replaced: - DX5 print head – 4 pcs - Dampers – 32 pcs - Captops – 4 pcs - Pumps – 4 pcs - FPC tapes – 4 pcs - Sponges Approx. 1000 running meters have been printed since then. Total machine output: 13543m