Used Steel Plate for sale (26,626)

Condition: used, Machining and welding plate, cast steel, gray cast iron, heavily ribbed Nljdpfxedzqq Us Ab Usg Length: 2000 mm Width: 1200 mm Thickness: 150 mm Working height: 800 mm Plate thickness: 35 mm - Base frame made of solid wood Weight: approx. 950 kg Good surface finish

Condition: good (used), For pallet racking with a frame depth of 800 mm. Size: 530x800 mm Load capacity: 140 kg / panel If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking, as well as accessories, and we will be happy to assist you with your planning. Additional accessories available, such as: Frame, corner, and impact protection, push-through protection, chipboard, grating, back panel grating, and deep shelf supports. Shipping: Nledpogz H R Iefx Ab Ueg Please request the shipping costs, providing your postal code and location, as well as the desired quantity of items. Additional service offerings: Planning, racking assembly/disassembly, purchase/sale. Changes and errors in technical data, information, and prices, as well as items being sold subject to prior sale, are reserved!

Condition: used, Clamping plate with T-slots, made of cast iron Base plate for a radial drilling machine Assembly table, assembly station, base plate for a column-mounted swivel crane Length: 1850 mm Width: 915 mm Plate thickness: 230 mm Table surface with T-slots: 1030 x 750 mm - Clamping surface with T-slots 22 mm, spacing = 250 mm - Top surface milled parallel to the underside = clamping surface - Milled underside, with ribs that lie flat and provide support - Ideal as a base plate Weight: 1140 kg Nedpfx Absh R D Uzo Uslg Good condition

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool steel blank Nledpfxjhwn Tie Ab Uog Length: 2980 mm Width: 1380 mm Thickness: 74 mm - solid steel plate - surface milled - 4 bolted mounting brackets - plate with several symmetrically arranged holes Weight: approximately 2380 kg

Condition: used, Straightening and welding plate, steel casting – gray cast iron, heavily ribbed heavy-duty straightening plate Length: 2000 mm Width: 1600 mm Nodedzqrbepfx Ab Uolg Thickness: 110 mm Working height: 600 mm Plate thickness: 30 mm, continuous Weight: approx. 1000 kg Good condition, good surface finish.

Condition: used, Straightening and welding plate, cast steel, gray cast iron, heavily ribbed formerly used as a layout plate and measuring plate heavy-duty straightening plate Length: 1000 mm Width: 1000 mm Thickness: 230 mm Njdpfxedzqr Ao Ab Uslg Working height: 970 mm Plate thickness: 38 mm, continuous - Metal substructure Weight: 450 kg

Condition: used, Alignment and welding plate, made of cast steel/grey cast iron, heavily ribbed. Heavy-duty alignment plate. Nodjdzqbaspfx Ab Ujlg Length: 1600 mm Width: 1005 mm Thickness: 280 mm Plate thickness: approx. 85 mm, continuous - Central hole, Ø 245 mm, 400/800 mm - Threaded holes, M 20, approx. 55 mm deep - Through holes, Ø 27 mm Weight: approx. 2.5 tons Good condition Former press table – presumably machined on both sides.

Condition: used, Straightening and welding plate, steel Milled steel plate with a good surface finish, heavy-duty straightening plate Length: 1900 mm Width: 1500 mm Nlsdpfx Abedzqr Rs Uog Thickness: 70 mm, consistent throughout - Machined surface, surface milled - Plate with several symmetrical holes Weight: approx. 1600 kg Good condition Adjustable steel cast iron feet are available in our shop.

Condition: used, Alignment and welding plate SIEGFRIED WEYRAUCH Gemmingen Cast steel, grey cast iron, heavily ribbed Former layout plate and measuring plate Heavy-duty alignment plate Length 1000 mm Width 800 mm Thickness 28/125 mm Working height approx. 850 mm - Feet with adjusting screws for aligning the plate Nledpfx Absd N H Dbe Ueg Weight 370 kg Good surface condition

Condition: used, Alignment and welding plate, cast steel – grey cast iron, heavily ribbed Nledpfedzqrpjx Ab Uog formerly a layout plate and measuring plate heavy-duty alignment plate Length: 1000 mm Width: 800 mm Thickness: 250 mm Working height: 820 mm Plate thickness: 30 mm, continuous - height-adjustable metal substructure Weight: approx. 400 kg Surface: rusted

Condition: excellent (used), total width: 3,245 mm, total height: 13,053 mm, 90m³ stainless steel tank with heating and a robust funnel DIMENSIONS: - Diameter: 3.245 mm - Height: 13.053 mm Cylinder and bottom plate thickness: 3.1 mm Top plate thickness: 2.6 mm Steel grade: AISI304 (stainless steel) Year of manufacture: 2006 Weight: 4680 kg A DN 600 manhole with a hinged cover is located on the top. Stainless steel pressure-vacuum valve Downstream: DN400 manhole with hinged cover Stainless steel pressure-vacuum valve 1) Upper tank heating: 6 coils, exchange surface area 6.95 m², pressure drop 2 bar Above: 2 coils, exchange surface area 2.33 m², pressure drop 2 bar Device for transferring grounds, test valve Nedpezwm N Djfx Ab Uelg 2) Lower tank heating: 4 coils, exchange surface area 4.64 m², pressure drop 2 bar Above: 2 coils, exchange surface area 2.33 m², pressure drop 2 bar. Level gauge Rectangular manhole 555x432 DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing.

Condition: used, Welding edge former, edge former, edge beveling machine TRUMPF Nlodpfxodz Sq Ej Ab Uog Beveling of steel plates for weld preparation Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Power: 2000 watts Mains connection: 220 volts, 50 Hz - Equipped with a guide bracket for a 30° bevel angle - Resharpenable impact steel for high tool utilization - Set up for 20 mm sheet metal For beveling straight and curved edges with a minimum radius of 40 mm. For beveling edges on flat and curved workpieces, as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Nsdjibq Itjpfx Ab Uslg Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: used, 113m³ above-ground steel tank on steel supports Diameter: 3.10m Length: 15m Cylinder wall thickness: 8mm Front wall thickness: 12mm The tank has a hole in the top (visible in the photo), which we will weld. The following optional additions to the tank are priced separately: Nodpfxjw El Dle Ab Uslg Applying an state hygiene institution approved coating A DN50 float valve, or a DN100 float valve, including installation. The price depends on the float valve diameter. We have our own specialized trailer. Delivery costs depend on the destination.

Condition: excellent (used), 3-Roll Plate Bending Machine / Round Bending Machine Manufacturer: Nosstec, Sweden Type: 8266 15/40 Year of manufacture: 1998 Serial number: 3058 Working width: 1,540 mm Plate thickness: up to approx. 4 mm Rollers: 3 pieces, steel rollers Drive: motorized Operation: electric control with foot switch and mechanical hand adjustment Weight: approx. 840 kg Documentation included Very good condition, fully functional. Nodjz Agn Djpfx Ab Uolg

Condition: ready for operation (used), Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke Nljdpfxowqr R As Ab Uog 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: good (used), Year of construction: 1983, sheet width 2520 mm plate thickness 2.0 mm ST plate thickness 3.0 mm ALU distance between columns 2600 mm cutting angle 2.0 ° no. of strokes ca. 32 Hub/min weight 1480 kg range L-W-H 2892 x 1865 x 1430 mm Machine from a sheet metal shop Good condition (!!) Features: - Robust, electric-motor-driven panel shear - Shatterproof, torsion-resistant welded steel construction - Compact and well-organized machine design - Electric-motor-driven backgauge Nsdpfxsz Ek A Uj Ab Uelg * With analog position display * Manual fine adjustment from the front - 1x holding-down bar (continuous) - 1x freely movable foot switch - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Nedpfx Aezzvyteb Uslg Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Nledpfx Abszwxbfe Usg Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm Njdpfoz Dxpmox Ab Uolg diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm Nledpfszzvz Rex Ab Uog 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: used, Cast bed Nlsdpfx Abjzzvyyj Ujg Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Year of construction: 2022, sheet width 3100 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 mm down holder 14 Stück no. of strokes 13 Hub/min cutting angle 2.0 ° throat 350 mm back stop - adjustable 1000 (+) mm oil volume 260 ltr. engine output 22.0 kW weight 10.575 kg range L-W-H 4100 x 2400 x 2170 mm Demonstration/demo machine (!!) from our exhibition (like NEW) with very few operating hours Nlsdsxab I Hopfx Ab Ujg ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop Nljdpfxoxab Tve Ab Usg * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 Njdpfx Aszycpxsb Uelg oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks