Used Stenner Band Saw for sale (17)

Condition: good (used), Stenner Eagle resaw 11KW engine Feed speed shifted on belts belt wheel width 900mm cutting band width 75mm saw tension indicator manual cutting height adjustment manual cutting width adjustment machine in good working order and ready to work. Iiodpfx Acjvtzkro Aok machine dimensions: width 170cm, length 110cm, height 230cm weight +- 1600kg

Condition: good (used), 6 Head Multi-head Horizontal Bandsaw Saw pulley diameter: 915mm Sawblade width (max): 100mm Standard saw speed 35m/s Timber width Max: 305mm – 450mm Maximum opening saw to chain bed: 305mm Feed chains to saw lines 292mm Iedsxtbkhepfx Ac Aoik Main motor: 6x 18.5kw Feed speeds (variable): 15 – 60m/min std, 7.5 – 30m/min (optional) Type of feed: internal overhead feed system with driven chains synchronised with chain bed Operators control station including speed control and start stop controls Working height 800mm

Condition: used, Year of construction: 1999, functionality: limited functionality, STENNER ST9 Band Resaw 1999 11 kW motor Belt wheel width 900 mm Cutting band width 75 mm Saw tension indicator Manual cutting height adjustment Manual cutting width adjustment Machine dimensions: width 170 cm, length 110 cm, height 230 cm, weight approx. 1600 kg Iisdjxiydlspfx Ac Aok

Condition: used, The Stenner VH105 double bandsaw with two movable saw blocks that allow one of them to be placed behind the feed system to cut with one saw or to feed timber through the saw without sawing, both without removing the saw blade. - Manufacturer: Stenner, - Model: VHET105, - Saw pulley diameter: 1050 mm, - Saw blade width: 130 mm, - Feed speed: 10 – 80 m/min, - Distance between saws: 5 mm, - Distance between saws max: mm: 400 mm. Iiedpfx Acotp E Uzo Ajk

Condition: good (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: T4907, Cutting band saw Stenner VHM 36, 3" Year of manufacture 1976 S/N T4907 roller diameter 915mm max working width to fence ( right ) 230mm Iijdjuy U Eyopfx Ac Ask max fence width to left pressure roller : 230mm table height 812mm feed 10-45m/min fence tiltable 0-45 degrees max height 406mm Saw blades up to 78mm Motor 15kw ( 18 HP ) three-phase motor Weight approx. 1.85 tons Technical data subject to change

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, RADIAL ARM RESAW – STENNER ST 100 R The machine is equipped with: • A pressure guide system with easily replaceable guides that require no adjustment or calibration Isdpfx Aewnyamoc Aeik • Electronic interface with digital readout of the feed unit position • Multi-roller feed unit enabling cutting at angles of up to 35 degrees • Pneumatic saw blade tensioning • Blade and pulley cleaning system with integrated lubrication feed • Continuously adjustable feed speed from 5 to 60 m/min • Main drive motor with 15 kW power and automatic star/delta starter, featuring two emergency stop buttons • Manual positioning of the feed roller • Pneumatic roller movement activated by a photocell TECHNICAL DATA Working table height: 955 mm Pulley wheel diameter: 915 mm Cutting capacity: width 510 x 400 mm Distance from roller feed unit to saw blade: max. 305 mm Distance from feed rollers to saw blade: max. 230 mm Band saw specifications: Maximum length: 5545 mm Minimum length: 5465 mm Maximum width: 100 mm Machine dimensions: 1.8 m x 1.1 m x 2.38 m Machine weight: 1650 kg

Condition: used, Year of construction: 1997, Line 3 Stenner MHS9 machines from 1997 Iiodpfxew Nrhko Ac Ajk

Condition: good (used), Feed speed 10-80 m/min Saw wheel diameter 1050 mm Iisdpfxoxhfx Ej Ac Ask Bandsaw width 130mm Saw motor power 2 x 30 kW Hydraulic feed with centering. 7.5kW hydraulic pump Saw blade lubrication tank 2 x 6l Voltage 400 volts 50 Hz Weight approx. 10,000 kg

Condition: new, Year of construction: 2025, Band Resaw STENNER ST100R - Wheel diameter: 915 mm - Possible saw blade widths: up to 100 mm - Pneumatic infeed and outfeed movement of feed rollers Iiedpfx Acsxbqqgs Aek activated by a photocell - Selector switch to enable/disable the photocell - Handwheel adjustment of the position of the inner feed rollers - 18 kW main motor with automatic star/delta switch, braking system, and two emergency stop buttons - Fence system with tilting capability - Includes rubber-coated feed roller - Includes prism feed roller for diagonal cutting of square timber

Year of construction: 2023, condition: new, Radial Band Saw Isdpfjmbbivsx Ac Aoik

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, Iiodpfxsvuhumo Ac Ask motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: good (used), 6 Head Multi-head Horizontal Bandsaw Saw pulley diameter: 915mm Sawblade width (max): 100mm Standard saw speed 35m/s Timber width Max: 305mm – 450mm Maximum opening saw to chain bed: 305mm Feed chains to saw lines 292mm Main motor: 6x 18.5kw Iisdpfxsxgrrpe Ac Ask Feed speeds (variable): 15 – 60m/min std, 7.5 – 30m/min (optional) Type of feed: internal overhead feed system with driven chains synchronised with chain bed Operators control station including speed control and start stop controls Working height 800mm

Condition: ready for operation (used), Nice tidy machine, still in situ for the next week so can be seen working, 3inch wheels, hydraulic vario infeed control, complete with start /stop control panel with tracking facility for setting saws up, and 10 second stop brake all incorporated, wheels and bearings all good. Iiodpfewpby Rex Ac Aok

Condition: good (used), Feed speed 10-40 m/min Distance: roller fence to sawline 230 mm Distance: feed rollers to sawline 159mm Isdjxhfx Sjpfx Ac Aoik Distance between saws 5mm to 180mm Saw blade dimensions 6050 x 100 x 1.06 mm to max 1,24mm Saw blade speed 35 m/sec Saw wheel diameter 915 mm Saw motor power 2 x 15 kW Feed motor power 1,1 kW with inverter. Saw blade lubrication tank 2 x 6l Voltage 400 volts 50 Hz Weight approx. 6000 kg

Condition: good (used), Reasaw Stenner Type:Stenner VHM 36 Saw line including lifting tables ,infeeding conveyor, reasaw Stenner 36,outfeeding conveyor 7m Toatal lengt approx. 12 m Tech. info: Reasaw Stenner Bandsaw wheel 36´(900mm) Saw blade width 75, 90, 100mm Fence to saw blade 250mm Feed roll to saw blade 250mm Max cutting hight 400mm Motor 15 Hp, 400 volt, 50 Hz, 3 phase Hydraulic lifting table: Brand: Hymo Capacity: 4000 kg Iedpfxjqzh Nws Ac Aoik Work table size: 3500x1400 mm Hydraulic lifting table size:1200x900mm Input conveyor: Length: 4200 mm Width of roller: 500 mm Outfeed belt conveyor 8000mm Stock no:2001941BXM

Condition: used, Year of construction: 2002, 900mm steering wheels Iisdpfx Acex Iku Is Aok Electronic speed variator for advancement Maximum cut height 370mm Motor 15kW 380V

Condition: refurbished (used), saw band length: 6,980 mm, saw band width: 100 mm, total height: 2,200 mm, total length: 90 mm, total width: 80 mm, table height: 82 mm, working height: 82 mm, roll diameter: 200 mm, height adjustment type: mechanical, space requirement height: 2,200 mm, power: 18 kW (24.47 HP), saw blade length: 6,980 mm, Wheel diameter: 915 mm, Blade width: max. 100 mm, Iedpjxy Id Iofx Ac Asik Max. roller blade opening: 230 mm, Feed unit Motor: 18 kW, Variable speed from 10 to 45 m/min, Cutting angle: 0-45°, Requires a small pit