Used Stepper Motor for sale (24,480)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: SEH-80X, power: 2.79 kW (3.79 HP), fuel type: gasoline, number of cylinders: 1, cubic capacity: 133 cm³, nominal power: 4.04 kW (5.49 HP), rotational speed (min.): 1,400 rpm, rotational speed (max.): 3,900 rpm, overall weight: 33 kg, total length: 600 mm, total width: 600 mm, total height: 600 mm, torque: 10 Nm, type of cooling: air, The Koshin SEH-80X is a high-quality, professional 3-inch (80 mm) gasoline-powered water pump, driven by a reliable Honda GX160 four-stroke engine. This self-priming centrifugal pump is specifically designed for the rapid transfer of large volumes of clean to slightly contaminated water, making it widely used in construction, agriculture, shipping, and emergency drainage applications. Key specifications: • Capacity: Maximum 930 to 1,100 liters per minute (approx. 54 m³/hour free discharge). • Head: Maximum 26 to 30 meters. • Suction lift: Maximum 7 to 8 meters. • Engine: Air-cooled Honda GX160 (163 cc / approx. 3.9 to 5.5 HP). • Connection: 3" external thread (80 mm) for both inlet and outlet. • Solids passage: Suitable for solids up to a maximum of 3 mm. • Fuel tank capacity & runtime: 3.1 liters, providing approximately 2 hours and 10 minutes of continuous operation. • Weight & Dimensions: 30 kg with a compact size of 52.5 × 38.9 × 45.8 cm. Construction & Durability • Robust pump housing: Made of lightweight and exceptionally strong die-cast aluminum. • Cast iron internals: The impeller and impeller housing are made of cast iron for excellent wear resistance against abrasive particles (such as sludge). • Mechanical shaft seal: Features a high-quality carbon-ceramic seal that prevents leaks and significantly extends the service life. Iiodpezw U Nlsfx Aiyog • Protective frame: The entire unit is mounted in a sturdy steel rollover frame with rubber vibration dampers to reduce mechanical stress. • Oil Alert: The engine automatically shuts off when the oil level drops too low to prevent engine damage. Performance at different heights The pump delivers less water as the head increases: • Free discharge: 54,000 liters per hour • At 5 meters: 49,500 liters per hour • At 10 meters: 42,000 liters per hour • At 20 meters: 27,000 liters per hour The SEH series uses the more expensive and high-quality Honda engine. Heavy-duty ballast pump for shipping, construction, etc. Type: SE Color: black Pump type: self-priming centrifugal pump Impeller type: open impeller Engine type: 4-stroke HONDA gasoline engine Shaft seal: mechanical seal of ceramic on carbon Impeller material: cast iron Impeller housing material: cast iron Pump housing material: aluminum Pump shaft material: stainless steel Liquids: slightly contaminated water At 10 meters: 42,000 liters per hour At 15 meters: 36,000 liters per hour At 20 meters: 27,000 liters per hour At 25 meters: 9,000 liters per hour Dimensions: lxbxh = 525 x 399 x 476 mm Weight: 34 kg Engine type: HONDA, GX160, 4-stroke engine, E5 gasoline Shaft power: 2.79 kW, 3.8 hp at 3600 rpm Shaft power: 4.04 kW, 5.5 hp at 4000 rpm Fuel tank capacity: 3.1 liters, approx. 2 hours and 10 minutes

Condition: used, mileage: 7,55,675 km, power: 266 kW (361.66 HP), first registration: 09/2008, fuel type: diesel, number of seats: 55, gearing type: automatic, emission class: euro5, color: other, brakes: retarder, Year of construction: 2008, Equipment: ABS, air conditioning, cruise control, onboard kitchen, = Additional Options and Equipment = - DVD player - Air conditioning Iiedpfx Aszxg I Njiyog - Front refrigerator - Sleeper cab - Toilet - Webasto auxiliary heating = Further Information = Height: 370 cm Damage: None = Company Information = We are an international company based in Belgium, approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering an extensive parking area that serves as our exhibition space. We always have a large selection of buses of all brands, capacities, models, and price ranges in stock. We can find the right coach, school, or transit bus tailored to your needs or budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Opening hours for viewing used buses: Monday to Friday: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: used, Year of construction: 2000, Sold for parts, ADU card missing. Automatic tablet testing system - Laboratory measuring equipment - Tablet tool Enables testing of: Hardness Diameter Thickness Weight Precision balance Sartorius WZ64S Scale : 10 à 50 g Unit : mg / 0,5 mg / 0,1 mg adjustable Thickness Drive: stepper motor. Measuring principle: linear potentiometer. Unit of measurement: mm or inch. Tolerance: +/- 0.1 mm Hardness Drive: stepper motor. Measurement: load cell (lmz) Measurement principle: dynamometric gauge Unit: N, Kp or Sc Diameter Drive: stepper motor. Measuring principle: stepper motor. Unit of measurement: mm or inch. Scale: 3 - 18 mm / 3 - 30 mm (manual) Tolerance: +/- 0.1 mm Tension : 100 / 240 V, 50Hz / 60 Hz The UTS is a universal, fully automated testing system developed for use in industry. This tool is the approved model of a series of test systems that have been tested over many years. It was developed in close collaboration with the pharmaceutical industry. Iijdpfx Aisx Rz I Dsysg The UTS 4.1 can be used to test round, oval, square and oblong tablets, as well as many special shapes. For delicate oblong tablets, the proven oblong centring system (OZB) can be integrated. All parts requiring cleaning can be removed quickly and easily without any tools. The test system can be supplemented with various options, such as a distributor and/or sample collector with a different number of stations. Use the UTS as a laboratory tester or an online control device connected to a tablet press. Sampling can be triggered either in the production machine or using the TTS11 software.

Condition: like new (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: UC 2109/29604202, power: 55 kW (74.78 HP), rotational speed (max.): 1,500 rpm, input voltage: 415 V, input frequency: 50 Hz, input current: 93 A, type of input current: three-phase, type of cooling: air, protection type (IP code): IP55, Siemens drive motors 55 kW Speed controllable via frequency inverter As-new motors, never used Iodsx Hizdopfx Aiyjig

Condition: used, power: 2.2 kW (2.99 HP), nominal power: 2.2 kW (2.99 HP), overall weight: 30,000 kg, We offer a wide selection of used geared motors from conveyor systems for sale. Available manufacturers include: SEW NORD Siemens Lenze Demag Isdpfjy Tg Sasx Aiyjig Technical data: Power: from 0.55 kW to 2.2 kW Stock: over 1,600 units Total weight: approx. 30 tons Thanks to the large number of units, you are likely to find the right geared motor for your needs. Upon request, we will gladly send you a detailed Excel list with the available models and technical data. Large quantities available immediately Sales preferably as a complete package Price per unit: 100 to 150 € net (depending on the model and condition) If you are interested, we look forward to receiving your inquiry. Please note that unrealistic price offers will not be answered.

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 unused Technical data: Dimensions of thicknessing table: 630 x 1,000 mm Planing width: 630 mm Main motor: 9 kW Max. planing height: 300 mm Max. material removal: 8 mm Max. working length: 210 mm Min./max. working height: 3.5 / 300 mm Motorized thicknessing table feed with 2 speeds Feed rate: 5 / 8 / 12 / 18 m/min Speed: 4,500 rpm Planing shaft diameter: 120 mm Number of Tersa planing knives: 4 pcs. Roller pressure adjustable Front infeed roller with helical teeth Outfeed roller with rubber coating Dust extraction port diameter: 150 mm Motor 400 V / 50 Hz: 9.0 kW Weight: 750 kg Availability: short notice Iiodpfsz Dlmlox Aiyjg Location: Saxony-Anhalt

Condition: used, mileage: 1,900 km, power: 353 kW (479.95 HP), first registration: 04/2026, fuel type: diesel, number of seats: 57, gearing type: automatic, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, navigation system, onboard kitchen, parking heater, soot filter, 3 units in stock – Identical models MAN Lion’s Coach – R10 – 13.10 meters New vehicles without registration – Manufacturer’s warranty 24 months / 12 months FULL WARRANTY from MAN available on request – 48 months or 320,000 km from initial registration. We are happy to send you the detailed specifications by email. Highlights: * MAN Engine 12,419 cc and 353 kW * MAN TipTronic 12-speed * 55 sleeper seats * Reclining travel seats + driver’s seat * LED headlights * Navigation system * USB ports at all seats * Toilet * Kitchen * All driver assistance systems * etc. Vehicles available immediately from 85235 Odelzhausen. Iisdsx I Txiepfx Aiyjg Driver sleeping compartment: * Kitchen * Cool box * Navigation system * Sleeper seats * Auxiliary heater * TV * Toilet Speed control: Adaptive cruise control Air conditioning: Automatic climate control * Stand-alone air conditioning unit Safety: ABS * Retarder/Intarder ---- Inspections and test drives are possible at any time! If you have any questions, we are happy to assist you. Visit our website. Errors and prior sale excepted. ---- Opening hours: Monday – Friday 9:00 a.m. – 3:00 p.m. Appointments also available by arrangement ---- Information on data protection at

Condition: used, Year of construction: 1993, operating hours: 57,000 h, functionality: fully functional, rotational speed (min.): 1,413 rpm, input voltage: 400 V, Industrial DC Electric Motors 481 kW – IEG / Ansaldo Available: 2 high-power industrial direct current (DC) electric motors, manufactured by IEG Trieste – Ansaldo Industria, designed for heavy-duty industrial applications. The motors have been dismantled from an industrial plant and are in excellent condition, complete with dedicated ventilation systems and control panels. Ideal for the revamping of existing plants, rolling mills, extruders, large fans, hoisting installations, or other industrial high-torque applications. Main technical data: Manufacturer: IEG Trieste – Ansaldo Industria Type: Direct current (DC) motor Power: 481 kW Voltage: 400 V Rated current: 1530 A Speed: 1413 rpm Duty: S1 continuous Excitation: 220 V Year of manufacture: 1993 Iiodpfx Aeytgk Isiyjg Operating hours: approx. 57,000 Equipment included: - Dedicated ventilation system - Electrical control and command panels - Technical documentation available On-site inspection possible

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 6000 rpm -Power: 1 kW -Construction: B5 -Diameter shaft: Ø 24 mm Iiodpfxodqckys Aiysg -Number: 1 piece of motors available -Price: per piece -Dimensions: 500/165/H210 mm -Weight: 18 kg

Condition: used, mileage: 9,73,338 km, power: 260 kW (353.50 HP), first registration: 04/2010, fuel type: diesel, number of seats: 57, gearing type: mechanical, emission class: euro5, color: other, brakes: retarder, Year of construction: 2010, Equipment: ABS, air conditioning, cruise control, disability-friendly, = Additional Options and Equipment = Iisdpjzblk Njfx Aiyeg - DVD - Air conditioning - Front refrigerator - Wheelchair lift - Toilet - USB connections - Webasto heater = Further Information = Height: 370 cm Damage: None = Company Information = We are an international company based in Belgium, located near Brussels (+/- 20 km). Belgian Bus Sales is your ideal partner for buying and selling used buses and operates a large on-site parking area as a display lot. We always have a wide range of buses in stock, covering all brands, capacities, models, and price categories. We can help you find the right coach, school bus, or city bus tailored to your requirements and budget. All details are provided without guarantee. Subject to errors, prior sale, and typos. Opening hours for used bus viewings: Mon-Fri: 08:30 am - 12:00 pm, 12:30 pm - 05:00 pm. Mówimy po polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: good (used), Year of construction: 1992, Travel range, X-axis: 1500 mm Travel range, Y-axis: 420 mm Travel range, Z-axis: 400 mm Clamping area: 2 x 700 mm x 420 mm Max. table load: 800 kg Number of tools: 2 x 36 pieces Iiodjcph Tmepfx Aiyjg Tool holder: SK 40 Rapid traverse rate: 25 m/min Weight: 9 t Space requirement: 6.50 x 4.5 x 3.1 m Low speed: 50 RPM High speed: 7500 RPM (stepless) Rapid traverse: 25000 mm/min Control system: Siemens Sinumerik 820 M GA 3 + 2 x single-axis stepper motor control Sama SFI Current clamping system: per station, 1 NC indexing head with counter bearing, support plate, rotary table, and hydraulic clamping, and 4-axis indexing head with rotary table in special design and separate NC control Clamping system: 4-axis indexing head consists of 4 x 2-jaw chucks, clamping pressure 12 bar, manufacturer: Hofmann HMR 4/kombi 294/4 Tool breakage monitoring system: Meutrsuix ATM B310 Renishaw measuring probe system (without probe) Coolant system with chip conveyor, filter system, and fine filter

Condition: used, mileage: 10,82,266 km, power: 315 kW (428.28 HP), first registration: 09/2015, fuel type: diesel, number of seats: 54, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, * Setra S 516 HD * 2-axle, 13 meters long * Vehicle available in quantities of 2 * Tinted side windows * Curtains * Air conditioning / automatic climate control * Climate control for the driver's area Iisdpfjzp Azmox Aiyog * WC with washroom * Video system with flat-screen monitors * Video surveillance of the center entrance and rear * Surveillance monitor for the driver * 51 + 2 reclining seats + 1 driver seat * TÜV/emission test can be renewed upon request * Subject to errors and prior sale

Condition: used, mileage: 11,67,423 km, power: 315 kW (428.28 HP), first registration: 09/2015, fuel type: diesel, number of seats: 54, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, * Setra S 516 HD * 2-axle, 13 meters long * Vehicle available in quantities of 2 Iisdpfxjzp Azge Aiyeg * Tinted side windows * Curtains * Air conditioning / automatic climate control * Air conditioning for the driver's area * Toilet with washroom * Video system with flat-screen monitors * Video surveillance of the center entrance and rear * Surveillance monitor for the driver * 51+ 2 reclining seats + 1 driver * TÜV/emission test can be renewed upon request * Subject to errors and prior sale

Condition: new, The Holzprofi CNC machine offers working dimensions of 900x600x200mm, a solid cast iron frame and a mechanically welded sheet metal frame. This CNC machine allows you to cut, shape and engrave various materials as well as produce intricate designs and patterns precisely and efficiently. CE compliant, depth probe included. Advantages and features: -Large work surface for many applications, even for larger workpieces - Compatible with many drawing programs thanks to G-Code integration - Made from special steel, it ensures maximum strength and longevity and is suitable for use in all weather conditions - DSP control box guarantees efficient and safe operation - High durability thanks to solid design with cast table and mechanically welded sheet metal frame Technical data: Isdjvrv Ayepfx Aiyoig Working dimensions (L x W x H): 900x600x200mm Cast iron frame: 1230x730x100mm Working height without legs: 750mm Motor: 2.2kW/3CV/230V spindle driven by frequency converter Stepper Motor: Nema 34 stepper motors for X, Y, Z and A axes Drive: The X, Y and Z axes are driven by 2505 ball screws Control: DSP type control box A-axis mandrel Ø: 100mm A-axis distance: 800mm Guide rail: 20x20mm ground stainless guide rail for ball supports Clamping option: ER20 clamp with Ø3, 6 and 12.7mm socket Base area: 1400x1180x1600mm Packaging dimensions: 1550x1235x1590mm Weight: 320kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Nucleus, servomotor -Type: NUDrive MP42 2A Size 42 R Rev.2 IP64 -Item No.: DS421106 -Shaft: Ø 14 x 35 mm Isdpfsyh Axnex Aiyoig -Number: 2 servo motors available -Price: per piece -Dimensions: 134/42/H56 mm -Weight: 0.6 kg/pc.

Condition: used, mileage: 8,83,130 km, power: 340 kW (462.27 HP), first registration: 05/2007, fuel type: diesel, number of seats: 61, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro5, color: white, brakes: retarder, Year of construction: 2007, Equipment: ABS, air conditioning, bathroom, parking heater,

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NM-FF2026, Equipment: CE marking, Frozen fish weighing dispenser integrated into the fish feeding, sorting, 10 kg weighing and packaging line. Designed for installation in the customer's premises, taking into account the dimensions and ceiling height. Multi-head dosing device MBP 14C2 EW 60. Number of heads: 14 pcs. Weighing type: weight sensors. Weighing accuracy: 0.1 – 1.5 gr. Pocket volume: 5 liters. Dosing in one cycle: max. 4000 gr. Pocket opening type: from two sides. Nominal speed: up to 180 cycles/min. Pocket drive: stepper motors. Air dehumidifier: above 0 degrees. Electricity AC 240V, 50 Hz, Consumption 1.0 kW; Equipment weight: 800 kg. Machine dimensions: 2600 x 2600 x 1450 mm (for clarification) Control: 12.1 ” touch-sensitive display. Number of programs: up to 99. Room temperature range: from 0 C to + 40 C; External vibration compensation: 4 built-in load sensors for external vibration compensation. Protection class: IP 66, condensation-resistant, completely washable Automatic zeroing: Yes. Self-diagnostics: Yes. Remote diagnostics: Yes. RCU cable. Conformity: CE. -Flow Pack type packaging machine PFM Zenith EW Servo. Equipment for forming pre-cut packages from a film roll. Packaging data: −Package width 100 - 320 mm. −Package length 80 - 400 mm. −Max. package volume 6 liters. −Max. roll width 700 mm. −Film roll diameter max. 350 mm. Mechanical speed: up to 90 cycles per minute. The actual speed will be specified after tests with real product and packaging material. THE BASIC SET OF THE MACHINE INCLUDES: The machine frame, electrical cabinet, melting jaws, vertical melter support made of stainless steel. Roll holder with centering cones. Ijdev Dit Nopfx Aiyeig One forming tube made of stainless steel for pillow-type packaging (diameter optional). Photo sensor for printed film and encoder for determining the length of the package. Vacuum belts for film feeding. Machine version with a slope for product and packaging safety. Product holding mechanism before jaws. Packaging support. Vertical seam sealing bar with pneumatic drive. Machine functions are controlled via PLC Siemens. Photo sensor for working with printed film. Possibility to save up to 99 different programs. Machine control via touch sensitive panel 12.2". Machine self-diagnosis. Notes: The machine is designed to work with hot jaws MACHINE DIMENSIONS (base model): Height: 1600 mm. Width: 1280 mm. Depth: 2200 mm. Weight 550Kg. Air consumption: 350 NL/minute. Electricity consumption: 4 Kw. Connection: 400 V. 3 Ph. - 50 Hz. 2. Multifunctional line, in accordance with the requirements and premises of the customer. Designed for feeding fish from IFQ, sorting, accumulating in containers, as needed, weighing 10 kg, forming cardboard boxes and feeding tilted boxes to sealing and pallets. The line consists of: - c) Feed conveyor to weighing 10 kg - d) Reversible conveyor for feeding filled boxes to sealing - e) Reversible conveyor with control from scales with two weighing places - f) Roller, gravity, conveyor for feeding empty boxes to 10 kg weighing places - g) Roller conveyor for feeding empty boxes to the 1kg packing table - h) Work table for packing 1kg packages into boxes - i) Rotary table for accumulating 1kg packages - j) Product feed conveyor to the MFG - k) Conveyor for feeding products from the MFG to the packer - l) Conveyor for feeding 1kg packages to the Rotary table - m) carton former, automatic - n) carton sealer -p) Xray

Condition: like new (used), Engines total 52 units: Leroy ISS100LT5; 1 unit ABB M2VA50B-S; 1 unit De Coster ONVT6; 25 units Werhe Kaiser AED3/4C; 1 unit D125; 1 unit LEROY LS11211; 1 unit BAUKNECHT 7587967/K01; 1 unit ABB M2AA160M2; 2 units ALLWEILER 1TZ90011CA134GB42; 2 units Iijdpfx Aiey Eghxjyog Leroy LS80LT; 2 units AACO; 1 unit RBL 473SE; 10 units Leroy LS90ST; 1 unit AEG 11190LY2; 1 unit HANNING L7A-6B-145; 1 unit LEROY LS714; 1 unit

Condition: used, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: SEM Andras, brushless servo motor type HR115A6-88S -Speed: 6000 rpm -Voltage: 530V -Torque: 3.7 Nm Ijdpfxshu Hxcs Aiyeig -Shaft: Ø 19 x 40 mm -Brake: 24VDC 10Nm -Number: 2 engines available -Price per piece -Dimensions: 275/115/H145 mm -Weight: 7 kg/pc.

Condition: used, Year of construction: 1998, overall weight: 80 kg, Equipment: type plate available, Spindle motor SJ - 11AW - 4M Mitsubishi Year of manufacture: 1998 Weight: 80 kg Nameplate present AC spindle motor, made in Japan, Mitsubishi Electric 4-pole, 3-phase, AMP input 200-230V, 50/60Hz, IP 44 Frame B112FU Iiodpozq Atlefx Aiysg IEC 34-1 1994, Manual No. BNP-B3759 Ambient temperature 0-40°C The motor was installed on a Mazak machine. Price: negotiable Our asking price is €1,950.00 net, ex works, plus packaging costs. Subject to technical changes and errors. Sale exclusively to countries within the EU.

Year of construction: 1996, condition: used, Hydraulic motor Year of manufacture: 1996 Iiodey Dvrwepfx Aiysg

Condition: used, mileage: 2,52,696 km, power: 315 kW (428.28 HP), first registration: 04/2023, fuel type: diesel, number of seats: 55, gearing type: automatic, next inspection (TÜV): 01/2027, emission class: euro6, color: white, brakes: retarder, Year of construction: 2023, Equipment: ABS, air conditioning, bathroom, navigation system, parking heater, soot filter,

Condition: good (used), Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 Iedpfxoi I Hdce Aiyeig -Individual components: see photos -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm -Weight: 74kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Isdpjzzlhaofx Aiyjig Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: like new (used), Year of construction: 1999, overall weight: 6,000 kg, volume flow: 300 m³/h, input frequency: 50 Hz, rotational speed (max.): 2,950 rpm, 11: Industrial pumps of the KSB brand 1 unused, 3 used KSB centrifugal pump + motor unit LUV h 150-340/2 Product information: Manufacturer: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture: 1968 Origin: Plant Frankenthal (Pfalz), Germany Condition: Used, but in good condition ⚙️ Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Delivery head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚡ Technical data – Motor: Voltage: 6000 V Current: 37.8 A Power: 300 kW Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 Motor number: 2-151-134 874/1 📦 Description: Iijdpfx Aiowq Shboysg This industrial high-performance pump from KSB is ideal for transporting large amounts of liquid. The pump is sold together with the matching motor unit. Manufactured to the solid German engineering standards of its time, known for durability and high performance. 2. Pump info: KSB centrifugal pump + motor unit Brand: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture of the pump: 1968 Origin: Plant Frankenthal (Pfalz), Germany 🔧 Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Delivery head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚙️ Technical data – Motor: Type: LUv 5/2 F9 30-605 Motor No: 2-151-134 874/2 Voltage: 6000 V Current: 37.8 A Power: 300 kW Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 📌 Condition: Used, but in good condition. Stored after disassembly from an industrial plant. Technical data has been verified based on the nameplate.