Used Support Ribbon Magnet for sale (14,451)

Year of construction: 2005, condition: excellent (used), Magnet plates Year of manufacture: approx. 2005 Bjdexhh Sbspfx Abcjwh LxW: 70x75 cm

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Bwedpfx Abeq E Ti Hocjh Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable.

Condition: not inspected (used), functionality: unexamined, MAGNET FOR CRANE OR EXCAVATOR Bwsdpfx Abjtp Iqvoceh

Year of construction: 2025, condition: new, This robust professional cable stripping machine, type KM1, cuts electrical cables from 1 to 70 mm in diameter. The blades are hardened so when stripping reinforced ground cable they are not immediately blunted. There are 15 different cable entries. The cable is cut from 2 sides so the copper core comes out easily. You can also use it to strip rubber and flat cables. Technical data: Mains voltage: 230 v ~ 50 hz Power: 3000 watts with dual pulley drive. Bsdpfxop I I U De Abcjwh Dimensions: 60 cm long, x 75 cm wide and 90 cm high Machine speed: 35 m/min Output: Depending on the cable 400 and 1200 kg/day Weight: 185 kg.

Condition: good (used), Twin Ribbon Mixer Bwodpfsqu Uyksx Abcsh Fully Stainless Steel Mixing Chamber Dimensions 1500mm Long x 1100mm Wide x 700mm Deep

Condition: excellent (used), For sale: Gaussmeter MAGSYS HGM09s from the renowned manufacturer MAGNET SYSTEME (MAGSYS) – a professional magnetic field meter designed for industrial, service, and laboratory applications. This device is used for precise measurement of magnetic induction (mT / mG) and is widely used in quality control, maintenance, diagnostics of magnetic separators, magnetic grippers, permanent magnets, as well as laboratory applications. — Technical condition • Fully functional equipment, powers on correctly • Clear display, responds to magnetic field • Normal signs of use • No information on current calibration (user calibration may be required if necessary) — Included in the set • MAGSYS HGM09s gaussmeter • 2 MAGSYS magnetic probes • Complete cabling • USB memory stick • Original transport case • Exactly what you see in the photos — Main features • DC magnetic field measurement • Units: mT / mG • Functions: AUTO, HOLD, ZERO (NULL), manual/automatic ranges • Data logging and retrieval capabilities • Robust, industrial-grade construction • Suitable for B2B / laboratory applications — Applications • Maintenance • Industry and manufacturing • Quality control • Magnetic separators and systems • Laboratories and technical services Bwodpfx Aoydfvksbcjh

Condition: new, Year of construction: 2026, ++++our new product line MetalSelect++++ NEW OVERBAND-MAGNETS QUALITY PRODUCTS MADE IN EUROPE 500 TO 1500 MM WIDE 1 YEAR WARRANTY Bwodpfx Aoyg E Ryebcsh FAST DELIVERY ATTRACTIVE PRICES ++++ASK FOR OFFERS++++

Condition: good (used), - Magnet with hydraulic motor for HAMMEL NZS 700 D - supply without belt or optionally with ne belt Bwedpfoyg E Raex Abcsh - Dimensions of the magnetic block: 125 x 125 cm

Condition: new, NEW OVERBAND-MAGNET FOR MOBILE MACHINES DOPPSTADT, KOMPTECH ETC. - dimensions of the magnetic block: length 1440 mm x width 530 mm x height 256 mm - with hydraulic motor suitable for your machine FAST DELIVERY Bodpfsyg E N Nex Abcowh

Condition: new, Year of construction: 2026, ++++our new product line MetalSelect++++ NEW OVERBAND-MAGNETS QUALITY PRODUCTS MADE IN EUROPE 500 TO 1500 MM WIDE 1 YEAR WARRANTY Bodoyg E Apspfx Abcewh FAST DELIVERY ATTRACTIVE PRICES ++++ASK FOR OFFERS++++

Condition: new, NEW OVERBAND-MAGNET FOR MOBILE MACHINES DOPPSTADT, KOMPTECH ETC. - dimensions of the magnetic block: length 1440 mm x width 530 mm x height 256 mm - with hydraulic motor suitable for your machine Bedpeyg E Acsfx Abcowh FAST DELIVERY

Condition: good (used), - Magnet with hydraulic motor for HAMMEL NZS 700 D Bedpfeyg Ezrox Abcewh - supply without belt or optionally with ne belt - Dimensions of the magnetic block: 125 x 125 cm

Condition: excellent (used), Machine ready for operation. Ribbon mixer for bulk materials with a capacity of 1200 liters. Bwedpfxjyg Evve Abcoh

Condition: used, Electro round magnet, crane magnet, load magnet, lifting magnet STEINERT type LR 250-N-2 Serial no.: 421850 Load capacity: 1000 kg Bedpfx Aoxf Uygjbcjwh Magnet diameter: 250 mm Power consumption: 0.662 amperes Mains connection: 200 volts DC = direct current - An external power supply is required (not included) - For crane operation - Load test performed on crane – material-magnet detachment between 2200 - 2250 kg Net weight: 32 kg

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. Bjdpfxotqfhxj Abcswh The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: used, Conveyor belt, belt conveyor, magnetic conveyor belt NEUHÄUSER Type 1700 x 50 / 1,060 + 110S Year of manufacture: approx. 2003 Bwodpfjxcbppox Abceh Usable length: 1700 mm Belt width: 50 mm Belt length: 3700 mm Aluminium frame profile cross-section H x W: 60 x 80 mm Roller diameter drum motor: 110 mm Roller width drum motor: 250 mm Belt speed: approx. 30 m/min. Motor power: 0.22 kW Power connection: 400 Volt, 50 Hz - Drive via drum motor BDL Type 110S - Magnetic rail under belt conveyor - Belt body made of aluminium system profile with 12 mm slot - 1 piece conveyor belt NEW 3700 x 50 mm - Front frame profile slightly damaged (see photo), no impact on function - Guide at front reversing roller broken off (see photo) Overall dimensions L x W x H: 1820 x 370 x 120 mm Weight: approx. 30 kg

Condition: good (used), Ideal for pallet racks with frame depth 800 mm and 2700 mm crossbars. It is also suitable for other uses. Size: 1340*820 mm (55*105 mm) Load capacity: about 400 kg/m2 If you need shelves or accessories in other compositions or designs, please contact us. Bwjdehbhavspfx Abceh We offer a wide range of new and used shelves and accessories and will be happy to assist you in your planning. Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

Condition: good (used), For frame depth 750 mm. All other sizes are shown in the pictures. Price: 0,50 eur In stock we have: 3000 pieces Do you need shelves or accessories in other Bwjdof R Ha Ijpfx Abceh Compositions or executions, please contact us. Shipping: Please inquire by stating your postcode and location, as well as the desired quantity of the article the freight costs.

Condition: excellent (used), You are buying mesh shelves for pallet racking with end station. Size: 1320*850 mm and 890*850 mm Height (L shape): 22 cm Material thickness: 4.24 mm Pitch: 92*48 mm Load capacity: approx. 600 kg/m2 If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories such as Frame, corner and collision protection, push-through protection, chipboard, gratings, rear wall gratings, depth bars available. Shipping: Please enquire about freight costs, stating your zip code and location, as well as the required quantity of items. Further services: Planning, shelf assembly/disassembly, purchase/sale Bwodopu Ad Depfx Abceh Subject to changes and errors in technical data, information and prices as well as prior sale!

Year of construction: 2017, condition: excellent (used), Size: 1290x900x40mm (45x20mm) used, galvanized (42 pieces) Size: 1290x1145x40mm (45x20mm) used, galvanized (44 pieces) Grating cover 1290x900x40mm (45x20mm) 69 EUR/piece net Grating cover 1290x1145x40mm (45x20mm) 90 EUR/piece net If you require shelving or accessories in different configurations or designs, please contact us. We offer a comprehensive range of new and used racking and accessories, and are happy to assist you with your planning. Bjdpfoqfd Hgsx Abcewh Additional accessories such as: Frames, corner and impact protection, push-through protection, chipboard panels, grating, rear mesh panels, and depth supports available. Shipping: Please inquire about freight costs, specifying your postcode, location, and the required quantity of items. Additional services: Planning, racking assembly/disassembly, purchase/sale Specifications, details, and prices are subject to change without notice. Prior sale reserved!

Condition: used, 3700mm long, 960mm high, and adjustable Storage location: Nattheim Bwsdov Dauqopfx Abcjh

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Bwsdpfetq I Rqex Abcoh Rectifier required. 110 volts, 2.86 amps. Reduced special price. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Made of heavy cast iron – high rigidity and durability. Working opening approx. 120 mm (measured with a caliper). Adjustable pins with roller ends. Mounting through holes in the base – secure and stable installation. Very good condition, fully functional and ready for use. Ideally suited for machining shafts, tubes, rods, and other workpieces requiring support during turning. Bwodpfx Abow Sfptecsh

Condition: good (used), I SELL FEIN PS 50 MAGNETIC DRILL. IN VERY GOOD CONDITION. Bedpoulc Tusfx Abcowh

Condition: used, Equalising block for low-bed semi-trailer Dimensions – see photos ##### Bedpfxsyg Rt Te Abcjwh PLEASE CALL – NO EMAILS! #####