Used Upper Support for sale (16,119)

Condition: good (used), Upper support Bolt circle diameter 180 mm Prsdpfjccrqfex Airjc Depth 230 mm Width 600 mm Height 460 mm

Condition: good (used), Upper support Base plate 300 x 320 mm Bolt circle 265 mm in diameter Pjdpjb E Nw Iefx Airjrc Centering flange 100 mm in diameter Distance from base plate to steel holder: 185 mm

Condition: good (used), Upper support Sled width 145 mm Height 72 mm Bolt circle 180 mm Centering pin diameter 70 mm Prjdpfxsdq Nvie Airjc Contact surface 240 x 220 mm Weight 23 kg Shipping dimensions: L 490 mm W 220 mm H 270 mm

Condition: good (used), Obersupport Pjdpfx Asb Eyb Aeirjrc Masse : L.530 x B.270 x H.350 mm

Condition: good (used), Upper support, upper slide, dovetail guide, cross table Prsdpfjfnxw Tjx Airec -Tool slide: from automatic lathe SUGA type STS-2 -Measurements: see photos -Dimensions: 830/610/H300 mm -Weight: 119 kg

Condition: used, Upper support, upper slide, dovetail guide, tool slide, cross table -Tool slide: from automatic lathe SUGA type STS-2 -Measurements: see photos -Dimensions: 1080/530/H290 mm -Weight: 121 kg Psdsfnxxfopfx Airsrc

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, straightening roller diameter: 290 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm Pjdpfx Aie Afxb Esrsrc max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, spindle drive for upper support -Spindle drive: for upper support -Trapezoidal spindle: Ø 20 mm -Dimensions: see photos -Dimensions total: 450/155/H110 mm Psdpfxoxfzuwe Airerc -Weight: 5.4 kg

Year of construction: 2022, condition: used, functionality: fully functional, Single-Use Support Ultra-Freezer RoSS.FRDG Temperature range: +10° to -80°C Capacity: up to 300L Shelf system for 20L Meissner containers included Highest storage density for frozen biopharmaceuticals Easy installation and loading with frozen active ingredients Net weight: 600 kg Currently, up to 5 units are available for sale. Podpfx Aiszhuuversrc The units are currently out of service and stored. The new price per unit was >40,000 EUR.

Condition: used, Upper support, upper slide, dovetail guide -Rezess: Ø mm -Hole circle: Ø mm Podpod Ebpmefx Airerc -Dimensions: 121/295/H200 mm -Weight: 12 kg

Condition: excellent (used), Year of construction: 2024, 100 units of mesh decks, 1 ton per pallet position, for pallet racking 1.20m deep – New: Price per unit ex works: now only €9 instead of €20 (net)! Only available as a complete lot! Manufacturer: MantaMESH Type: MantaMESH Year of manufacture: 2024 Condition: very good Available: immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Performance independent from rack beams Uniformly distributed load (UDL) (kg): 1000 Permissible deflection (mm): 7.3 Load at structural failure (kg): 2000 Features: - ANSI MH 26.2 - 2017 compliant Prjdpfx Aiottu Sgorsc - Made in Germany - Pre-galvanized, hemmed support channels - SafeEDGE® on mesh and support channels - Mesh offers over 70% open area - EU Design Registration No. 002435099-0003 Specifications: Beam type: Box beam 50 Racking depth (mm): 1200 Mesh depth (mm): 1202 Mesh width (mm): 879 Pitch upper wire (mm): 25 Pitch lower wire (mm): 100 Upper wire diameter (mm): 4 Lower wire diameter (mm): 5 Support channel thickness (mm): 1.2 Number of support channels: 5 Finish: Pre-galvanized Weight (kg): 12.24 Front: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward Rear: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, workpiece width (max.): 70 mm, workpiece length (max.): 100 mm, height adjustment type: electric, Equipment: CE marking, For sale: a professional edge banding machine, FELDER FORMAT4 tempora F600 60.06 glueBox, manufactured in 2021. The machine was purchased new and has been used by a single company since its acquisition. It is in very good condition, regularly cleaned, and serviced. It has only been used for 300,000 linear meters. Machine features: X-motion PLUS – control with an 18" Smartouch screen memory for work programs and precise adjustment of parameters feed speed of 10 / 18 m/min pre-milling unit with diamond cutters additionally reinforced pre-milling unit, 2 × 1.5 kW pre-milling unit with a height of 64 mm automatic edge feeding and the option of feeding wooden veneer strips magazine for wooden veneer strips, 120 mm pneumatic pressure unit guillotine shears for edges from rolls, 0.4–3 mm saw unit for trimming with two motors and frequency inverters multi-functional x-motion PLUS milling unit with independent upper and lower motors motorized adjustment of the unit in 2 axes unit for rounding the corners of boards, softforming and postforming profile edge trimming unit – R2 mm upper and lower polishing units sprayer for cleaning agent sprayer for anti-adhesive agent on the feed side application of lubricant for delicate edge surfaces table with air cushion and retractable support extended feed table automatic central lubrication pneumatic-mechanical lock to prevent premature feeding of the next piece Predpfx Aj Aara Reirjc LED lighting Additionally: The machine has two sets of heads. One set is currently in use, while the second set is new and has not yet been sharpened. The machine is ready to operate, without the need for any additional investment to start production. The machine can be inspected and tested while in operation.

Condition: excellent (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Mitsubishi MV2400R precision wire cutting machine (2018) in very good condition, in constant use, fully functional and ready to work – very little used (2700 hours). Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control: Mitsubishi M700 series Axis travel range: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1050 × 800 × 295 mm Max. workpiece weight: 1500 kg Worktable: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 µm Power supply and cooling – complete, functional Machine dimensions: 2687 × 3030 × 2150 mm Weight: approx. 3500 kg Equipment and accessories: Original wire guides - upper and lower Automatic Wire Threading (AWT) Filter tank with ion exchange resin Complete set of mounting and supporting devices (in a carrying case) Wire alignment device Original documentation and operating manuals Additional equipment purchased for over €10,000: Wire guides for angle cutting - upper and lower 30 degrees Processor battery Prsdpfx As Agggyjiroc Precision vice for clamping workpieces 0-600 PSI pressure gauge - 2 pcs MV power contact (259320) - 2 pcs Nlsbiawhcsxu Hvleloa CF card with software 0.25 mm EDM wire - 3 new spools 2 sets of new filters Machine transport and handling system. Machine Condition: The machine is well-maintained, regularly serviced, and ready for immediate operation. Filtration and cooling systems are included. We can assist with transport, setup, and commissioning of the machine, as well as operator training – we are EXPERIENCED. Price is negotiable. I will issue a VAT invoice, export 0%.

Condition: used, Year of construction: 2009, functionality: fully functional, space requirement length: 14,000 mm, space requirement width: 2,000 mm, total height: 1,500 mm, total length: 12,000 mm, total width: 1,500 mm, year of last overhaul: 2025, Equipment: documentation/manual, Folding-Gluing machine Inramik Vesta 800 Plus 2009 - In production, 2 shifts per day, first owner - Up to 3 gluing points, Velco gluing system - Minimum box width 65mm - Maximum box width 800mm - Glue line monitoring/detection system - 1 ejector unit - Press section equipped with an acceleration/speed-up feature - Air nozzles and full tooling for CD envelopes and sleeves - Suction system at the feeder - Support rails (2 per section, 8 in total) - Central guides, including the upper assembly for packaging alignment - Glue pot converted to a conical fitting (similar to Bobst machines) – a more advanced solution - Two glue wheels, 5mm and 3mm - Belts replaced on a regular schedule Prsdpj Aa I Nnofx Airoc The machine has been continuously maintained by our in-house maintenance team; in excellent working condition throughout its entire service life. - Price includes dismantling and loading. Price: 45,000 EUR

Condition: excellent (used), functionality: fully functional, grinding capability on the inside or on a flat surface mechanical oscillation adjustable feed speed via a variator electric adjustment of the upper/lower grinding unit grinding belt height: 150 mm table angle adjustment capability to grind curved parts Predsy N Ry Hopfx Airoc total motor power: 5.7 kW 1994 power supply: 380V Two belt speeds Diameter of the roller for curves: 40 mm Conveyor with pressure roller at the inside Brushing unit with angle adjustment Frame support Mobile construction CE marking External dimensions: 2300x1200x1600

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Prodszc Ilxjpfx Airjc

Year of construction: 2001, condition: used, functionality: fully functional, Bobst Autoplatine SP 104-ER (2001) Automatic die-cutting machine for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The machine is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop operation and a pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system, with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment ### Machine Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centering at stripping and delivery stations Control cabinet cooling unit Gripper bars Bobst C.U.B.E. electronic machine operating system Additional C.U.B.E. control panel at the feeder Bernoulli sheet braking device at the stripping station Bernoulli sheet braking device at the delivery station Motor with frequency converter control ### Feeder Pile tray with handle for lateral adjustment during production Pile height adjustment with front photocell Rear pile guides (OS and OOS) Side blowers adjustable with Centerline marks Suction unit with multiple adjustments Vertical adjustment of the suction head Automatic lateral pile correction Manual non-stop device Synchronization of sheet arrival against the front lays Safety system for lowering the pile tray ### Feed Table Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard, and corrugated board up to 4 mm 4 laterally guided transport belts ### Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Prsdpo Afv Szofx Airjc Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm 3x upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Adjustable supporting plate centering, ±0.9 mm Lowering of the chain guides ### Technical Details Production Rate: 8,000 sheets/hour Max Sheet Size: 1,040 x 740 mm Min Sheet Size: 400 x 350 mm Max Die-Cutting Size (with gripper margin): 1,040 x 725 mm Max Cutting Die Size: 1,050 x 746 mm Convertible Stock: Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Max Platen Pressure: 2.5 MN (250 t) Max Pile Height: Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size: 1,200 x 800 mm ### Net Weight 20,000 kg ### Electricity Main motor 11 kW, total connected load max. 25 kVA ### Note The buyer is responsible for disassembly; no tools are provided. Still connected to power.

Year of construction: 1998, condition: used, functionality: fully functional, Automatic die cutter for paper and carton converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The press is equipped with an automatic waste stripping station and a pile delivery with manual non-stop rack and front waste removal device. Operation is controlled via the Bobst C.U.B.E. control system with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping station. Equipment ###Machine Platform with safety barrier Machine elevated by 415 mm, including platform elevation Centerline system for off-press tool preparation, quick registration, and fast setting of adjustable elements Electrical cabinet with air conditioner Light beam indicator for machine state Sheet passage control unit with infrared cells 4 auxiliary control panels C.U.B.E. centralized microprocessor control unit with LCD display and keyboard for sheet counting, cutting force with adjustable overload limiter, speed setting, and synoptic status display Additional C.U.B.E. control panel at the feeder Bernoulli sheet braking device at stripping station Three-phase asynchronous main motor with frequency converter control ###Feeder Floating pallet tray with manual handle for lateral adjustment during production Suction unit with multiple adjustments Pile height control with front photocell Side blowers laterally adjustable with Centerline marks Automatic vertical compensation of the suction head Manual non-stop device Sheet synchronization device adjustable during operation Psdps Afvruefx Airerc ###Feed Table Anti-static stainless steel plate Upper transport for paper, carton, and corrugated board up to 4 mm Upper frame with manual lifting device 4 fixed position lower feed belts 4 paired adjustable front lays Pull guide (OS) adjustable with Centerline marks Sheet presence control and double sheet detector Sheet synchronization device with manual adjustment, machine stopped ###Platen Press 3x upper chase with quick locking, fixed bottom plate Lower ground steel cutting plate, 5 mm Lower supporting plate of synthetic material, 22.5 mm Device for die-cutting without gripper margin Gripper bar reopening device Compensation plate, 4 mm ground steel Adjustable centerings for the lower supporting plate, ±0.9 mm ###Waste Stripping Station 2x upper pull-out frame 2x lower pull-out frame Central quick lock pull-out frame ###Technical Details Production Rate: 8,000 sheets/hour Max Sheet Size: 1,040 x 740 mm Min Sheet Size: 400 x 350 mm Max Die-Cutting Size: (with gripper margin) 1,040 x 725 mm Max Cutting Die Size: 1,050 x 746 mm Convertible Stock: Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Max Platen Pressure: 2.5 MN (250 t) Max Pile Height: Feeder 1,400 mm (non-stop 1,100 mm), delivery 1,120 mm Max Pallet Size: 1,200 x 800 mm ###Compressed Air min. 6 bar; without a central supply, a compressor of 7.5 m³/h with a 110 l tank is required ###Net Weight 15,000 kg ###Electricity Main motor 11 kW, total connected load max. 25 kVA Note The buyer is responsible for disassembly; no tools are provided. Still connected to power.

Condition: used, functionality: fully functional, Year of construction: 1996, Motorized Swivel Bending Machine Predpfx Ao Afu Hkoiroc Manufacturer: HERA, Model: SM4 2500x6mm Year of manufacture: 1996 Technical data Manufacturer: HERA Model: SM 4 Year of manufacture: 1996 Capacity: 2520 x 6 mm Upper die stroke: 450 mm Lower die adjustment: max. 80 mm Bending die adjustment: max. 100 mm Operating voltage: 400 V / 50 Hz Control voltage: 230 V Dimensions: Width: 3.9 m, Depth: 2.75 m, Height: 1.9 m Weight: approx. 7 t Equipment • Motorized back gauge 1000mm with ball roller support table • Motorized bending die adjustment • Sharp clamping bar 45° • Bending bars: 10mm, 20mm, 40mm • Segmented support foot, height 130mm, length 2500mm All information without guarantee. An inspection while the machine is running is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x100mm, 4x80mm including the piping shown, connected to 200mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be stored Units: Upper pressure, manual adjustment with crank and SIKO counter Infeed guide, manual adjustment with SIKO counter Jointing cutter with diamond cutters, sharpened A total of 2 replaceable glue tanks for quick color change from white to transparent Gluing unit with automatic edge feed for roll material up to 3 mm Pressure zone with 3 rollers Crosscut saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering and radius Corner rounding cutter R2 with diamond cutter, 1 motor Prodpfozn Afpex Airsc Radius trimming blade R2, manually adjustable Glue joint trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking Operating manual in folder format All indexable inserts of the milling units and trimming blades have been replaced or resharpened, saws sharpened, diamond jointing cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been replaced, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses renewed. Approx. 1200 operating hours, i.e. only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight approx. 950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: good (used), Code: 0197 Brand: CASADEI INDUSTRIA Model: K 30/10 HF - CE Standard Automatic edge bander for straight panels, with glue tank for wood, veneer, pvc, melamine, abs and various - CE Standard Technical data Automatic belt conveyor for panel feed - Speed 7 mt/min Panel height mm 10/45 Edge thickness up to 3 mm Gluing unit: Glue tank capacity kg 1,2 - Electronic temperature control Front and rear pneumatic end cutting unit with circular Vidia blades - Micrometric cutting depth adjustment -End cutting speed 9000 rpm - End cutting blade diameter 80 mm Upper and lower end trimming unit - Vidia cutters diameter 80 - Possibility of combined radius/chamfer cutters - End Trimming speed 9000 rpm Total power Kw 2,2 N° 3 suction ports diameter 60 mm Panel support roller conveyor Overall dimensions mm 2150 x 800 x 1200 h Prsdpfxs Aggc Do Airsc Weight kg 405

Condition: excellent (used), 4-axis hydraulic CNC press brake with HACO-Robosoft ATS 590 Graphic control (modernized in 2008) and CE conformity. Pressing force: 135 t Bending length: 4000 mm Dimensions L x W x H: approx. 4500 x 1600 x 2320 mm Weight: 10500 kg Accessories / Special features: • 4-axis CNC control HACO ATS 590 Graphic Y1 + Y2, X, R for bending depth, back gauge, and top/middle/bottom gauge fingers • The gauge fingers are adjusted manually, moving them together/apart • Graphical programming and display • CE conformity through 1 working speed • Hydraulic synchronized control • Manual table crowning by adjustment via hand crank under the die with SIKO counter • Split upper tooling, as new • Continuous universal die with 4 different V-openings up to max. V = 40 mm, as new Prjdpjx Npiyjfx Airoc • Split additional upper and lower tooling • Collecting rail • Tooling system "PROMECAM" • 2 pcs. support arms • Fast, precise and easy to adjust • Foot switch and emergency stop • Electrically secured safety doors (right, left, and rear) • 1 working speed, rapid return • CE conformity UVV valid until 04/2027 Delivery time: immediately from stock in Dortmund, free loading onto a truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2000, Robust oscillating milling machine T 26, swiveling from -45 to +45 degrees. Reversible drive motor 5/6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the swiveling angle is displayed in the upper display, which can then be set on the stop, allowing settings to be implemented according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for overall adjustment and infeed stop separately, as well as input of the cutter diameter; the cutting depth is automatically calculated. Stop with lifting device, can be swiveled away (for curved milling work). Table extension to the right and left with retractable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Foldable stop for plunge milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron table tops, left 500mm, right 500mm, with two insert guide rails. Prsdpfxozbm Tfo Airsc 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed connection, switchable from the control panel. Comfort stand with electrically height-adjustable feed support, which can be swiveled away for machine maintenance and then easily locked into place. Dust extraction port 2 x 120mm. Compressed air connection 6bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belt renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, ///Description: CNC sorting and optimizing line with length sorting, Paul Maschinenfabrik, model C 14 MKL, built in Germany in 2009 and overhauled as new in October 2026. The line has an infeed conveyor of approx. 10 m, a measuring station with 2 rollers for precise length measurement, and a C14 MKL CNC cross-cut head with a 700 mm TCT saw blade, driven by an 11 kW variable-speed motor. Discharge is on 11.5 m / 250 mm conveyor belts with 4 pneumatic ejectors. The Maxi Premium control system features a real-time Linux PC, touchscreen and remote diagnostics over the Internet. 6 months warranty. Prjdpfxjz S Tixs Airsc ///Technical data: //Feed system 1 infeed conveyor belt, approx. 10 m long 1 measuring station: 2 measuring rollers for precise length measurement, height adjustment with linear guide, serrated surface for a perfect grip on the workpiece 1 conveyor belt, discharge from measuring/infeed to the cutting station, approx. 6 m long //CNC model C14 MKL – cross-cut head Welded steel machine frame, 30 mm support wall thickness, 30° tilt angle TCT saw blade, standard diameter 700 mm Motor: 11 kW, variable speed Time adjustment for the energy-saving module Energy saving by connecting the intermediate circuits 6 lower feed rollers, spiral-grooved, large diameter, hard chrome, driven by a durable timing belt 6 upper rollers with easily replaceable polyurethane segments, independent pressure via pneumatic cylinders, with mechanical height-adjustment roller //Discharge 1 conveyor belt 11.5 m / 250 mm, with guided belt, driven by a 1.1 kW gear motor 4 pneumatic ejectors, 250 mm stroke, robust design, suitable for the 250 mm conveyor belt, maintenance-free pneumatic cylinders

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Prjdoxy Tm Ispfx Airjc