Used Swivel Radius for sale (5,288)

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm Rodpfozuyp Ejx Ap Ejcf *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Rodpfezuyh Iex Ap Eocf Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Ready for use after only 10 minutes of heating time Tool-free quick-change system Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Above and below Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. Rjdpfxjzuyhnj Ap Escf - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Single-sided edge banding machine Manufacturer: HOMAG Type: Optimat KAL210/6/A20/S2 Year of manufacture: 2008 Single-sided machine for joint milling of straight workpiece edges, edge banding and finishing of various edge materials from rolls or as strips, up to 20 mm edge thickness, in longitudinal and transverse operation. power control PC22 Modern control system based on Windows PC Technical data - Feed rate 18 - 25 m/min. - Feed rate with profile milling cutters FK11 max. 20 m/min. - Workpiece thickness 8 - 60 mm - Edge material strips max. 0.4 - 20 mm - Edge material rolls 0.3 - 3 mm Rsdpfx Apszux R Io Escf Joint milling unit - 2 motors, each 3 kW, 150 Hz, 9,000 rpm. for joint milling of the workpiece edge before edge banding - electropneumatic control of both motors Gluing unit A20 - 2 rollers Quickmelt hot melt adhesive unit - Temperature control electronically with LED display Magazine for 1 roll, manual - for solid edges, strips and rolls - 1 edge feed - 1 roll holder Pressure zone C - 1 driven pre-pressing roller, diameter 150 mm - 6 after-pressing rollers, diameter 70 mm Trimming unit HL84 / 0.8 kW - 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm. - Motors can be manually swiveled for chamfer trimming Pre-milling unit 1.5 kW - 2 motors arranged one above the other, each 1.5 kW, 200 Hz, 12,000 rpm. Profile milling unit FK11, manual - For processing the edge overhang on the top and bottom edges of the workpiece and for milling the front and rear edges of the workpiece Belt sanding unit KS 10 - for sanding straight and solid wood edges, oscillating, sanding pressure manually adjustable Profile sanding unit PS 10 - sanding from below, for sanding profiles, sanding pressure manually adjustable Automation package Chamfer / Radius KAL210/6/A20 - Automatic adjustment of the infeed fence - Automatic adjustment of the pressure zone - Pneumatic adjustment from chamfer to straight trimming - Pneumatic adjustment of the trimming motors for flush or overhang trimming - Pneumatic adjustment of the pre-milling unit for flush or overhang milling - Automatic adjustment from chamfer to radius milling during profile milling - Pneumatic adjustment PN10 / FA11 - Electronic height adjustment

Condition: new, functionality: fully functional, machine/vehicle number: 9.702-476.0, operating pressure: 180 bar, high-pressure hose length: 20,000 mm, overall weight: 198 kg, warranty duration: 24 months, temperature: 80 °C, The HDS 11/18-4 SXA Farmer hot water pressure washer impresses with its high cost-effectiveness thanks to its economical eco!efficiency mode and optimized burner technology. This reliable machine features high-quality components, such as a water-cooled, slow-running, 4-pole electric motor and a robust 3-piston axial pump with ceramic pistons. Thanks to the energy-saving EASY!Force Advanced HD trigger gun, Servo Control, and the clever mobility concept, the machine is extremely user-friendly and ideal for use on farms. The automatic hose reel attachment kit with a 20 m high-pressure hose significantly reduces setup time and increases the working radius. Technical Specifications: Condition: NEW Catalog Number: 9.702-476.0 Model: HDS 11/18-4 SXA FARMER Manufacturer: KARCHER Country of Production: Germany Series: Professional Condition: NEW Thread Type: KARCHER !EasyLock Series Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 500-1100 Operating Pressure (bar): 30 - 180 Fuel Consumption (kg/h): 5.2 Connected Power (kW): 7.0 Power Cable (m): 5 Max. Temperature (°C): 80 Fuel Tank Capacity (l): 25 Detergent Tank Capacity (l): 20 + 10 Weight (kg): 198 Dimensions (L x W x H) (mm): 1330 x 750 x 1060 Scope of delivery: Automatic hose reel with 20 m DN8, 400 bar hose Hand spray gun: EASY!Force Advanced Spray lance: 1050 mm Power nozzle 25° Servo Control Equipment: 4-pole, water-cooled three-phase motor Pressure cut-off Dry-run protection Automatic hose reel: Rcjdpfoxpgriox Ap Ejf - The integrated original automatic reel allows for quick and easy hose rewinding. High efficiency: - Eco!efficiency mode – economical and environmentally friendly, even during longer use. - Reduces fuel consumption and CO₂ emissions by 20 percent. Detergent dosing: - Precise detergent dosing with rinse function. - Large tank opening with filler chute. Mobility concept: - Jogger principle with large, rubber-tired wheels and a swivel caster. - Integrated tipping trough for effortless transport over steps. - Push handles for easy transport and maneuverability. Simple controls: - Intuitive operation with a large, one-button selector switch.

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Rcjdpfx Apov Sv Ens Ejf Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Platform transport wagon, heavy-duty trailer Industrial trailer with 2-axle swivel steering Manufacturer: PLAN, Type 11 Chassis No.: 31361-1, Year of manufacture 03/2015 Payload: 20,000 kg Unladen weight: approx. 3,760 kg Permissible total weight: 23,760 kg Redsztrv Uopfx Ap Escf Platform height: 850 mm Platform length: 5,000 mm Platform width: 2,500 mm Overall length: 6,100 mm (without drawbar) Overall width: 2,500 mm Tires: Ø 559 x 300 mm (solid rubber tire 559/305-406.4) - 4 wheels with 2-axle swivel steering - Tracking - Interchangeable drawbar, drawbar can be bolted on at the front or rear - Drawbar with a tow eye size of 40 mm diameter - Small turning radius - Very stable outer frame made of I-beams, height 280 mm, width 95 mm - Very stable steel floor made of 10 mm checkered plate Length for transport: 610 cm (with drawbar folded up) Width for transport: 250 cm Height for transport: 85 cm Weight per trailer: approx. 3,760 kg Good condition 2 units available Price quoted per trailer

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024358, empty load weight: 6,149 kg, maximum load weight: 28,851 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2018, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: blue, #Chassis – haulage semi-trailer - Fine-grain steel welded construction, fifth wheel coupling plate with replaceable 2" kingpin - Slightly angled outer frame with "Load-Lock-Profil" for lashing strap attachment - 13 pairs of additional lashing rings recessed into the outer frame, 2.5 t each - 24 t two-speed landing legs, single-side operation, straight foot, without thrust compensation - Pull-out ladder at the rear - Side door retainers - Wheel chocks with holder - Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm - Note: free support-leg corner dimension / rear swivel radius approx. 1930 mm - Galvanised steel rear underrun protection - Full-width rear mudflap - Half-shell mudguards with anti-spray flaps on the last axle only - Rear impact protection - "Blocker" – galvanised transverse steel angle, protecting against forklift damage and shielding the door hinges - 4 pairs of ferry lashing rings, marked yellow - Bolted pallet stop on both sides, approx. 15–20 mm high, reducing loading height by approx. 15–20 mm - Stainless steel storage box, W=600/H=400/D=500 mm, with polished lockable door #Rear wall / rear corner posts - Rear corner posts in steel up to roof edge, tarpaulin attachment with round tube and tensioning ratchet - Two-leaf rear portal doors, each with 2 internal rod locks #Tarpaulin - Tarpaulin with welded-in horizontal and vertical straps - Quick Lock System for side curtain with central locking, on the left (direction of travel) - Stainless steel tensioning locks on the right (direction of travel) - Customs cable running around the trailer with holder on the front wall (no customs seal, not combined with Quick Lock System) - Customer livery on side curtains and rear portal Rodpfswyiw Ejx Ap Eecf - Curtain with high-strength embedded spring steel strips, left side (direction of travel) – insertion battens on the left omitted as a result #Roof - Sliding roof, rear end-lift foldable, roof cover slides from rear to front, curtain colour: white - Eco lift roof, raised by approx. 380 mm on both sides, gas-strut assisted, optimum rain gutter at the rear, at the top of the rear bow above the doors #Paintwork - Frame: hot-dip galvanised incl. passivation - Landing legs: black coated - Front corner posts: galvanised and painted in front wall colour - Front wall: MB 5328 blue - Rear corner posts: galvanised and painted in rear wall colour - Rear wall: MB 5328 blue - Tarpaulin: RAL 5010 gentian blue - Pallet box lid: RAL 2011 deep orange - Note: the images are archive photos; the vehicle may still be in use.

Condition: good (used), Year of construction: 2014, Offer 26252 Technical data: - Drilling capacity in full steel ST 60: 22 mm - Drilling capacity GG 25: 32 mm - Thread cutting ST 60: M 20 - Thread cutting GG 25: M 24 - Drill spindle mounting: MK 4 - Quill stroke: 140 mm - 18 drill spindle speeds: 60 - 3050 rpm - Drilling feed, stepless: 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max: 420 / 1320 mm - Swivel angle: 320° - Table size: 1200 x 600 mm Rjdpozwftzefx Ap Escf - Table height: 905 mm - Motorized height adjustment / stroke of the drill column: 430 mm - Hydraulic column and arm clamping - T-slots, vertical, on the left side of the machine - Coolant system - Drive: 400 V / 1.1 / 1.6 kW - Space requirement: approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight: approx. 1800 kg

Condition: good (used), Motorized Swivel Bending Machine TOS Processing length: 2050 mm Rsdpfozrgu Nox Ap Escf Maximum bending capacity (steel): 4 mm Motorized back gauge Motorized clamping and bending Clamping height approx. 200 mm Bending radius adjustment manually from 0-100 mm The machine is in good condition and fully functional.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, Welding robot Qirox QRC 320 incl. V7 control system and programming handheld device with cable, connection cable robot control cabinet, tactile sensor, arc welding search, point editor Cloos welding machine Qineo Puls 600, wire feeder, welding torch, torch hose package, mechanical cleaning, torch testing gauge OPTION: Motion weld equipment and Qineo Next 452 1 cell base frame incl. partition walls 1 two-station indexing table incl. 2 rotating-swiveling manipulators Load capacity 250 kg/station, rotation radius 500 mm 1 light barrier, 1 start box, arc protection on the indexing table, 1 service door with end-of-travel limit switch, connection control integrated Documentation, manufacturer's declaration Rcodpfx Apezrpf Ds Eof Delivery date: possible within 8 weeks. Subject to prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 2012, Motorized Swivel Bending Machine Mfg. SCHRÖDER Type: MAK 4 EVO 3200/6.0 UD Year: 2012 Technical Data Manufacturer: SCHRÖDER Type: MAK 4 EVO 3200/6 UD Year of manufacture: 2012 Rcedpfx Apszrvdgj Ejf Working length: 3200 mm Capacity: 6 mm Upper die stroke: 850 mm Upper die geometry: 180° Bending center adjustment: 100 mm Dimensions: approx. L 6.45 x W 2.65 x H 2.75 m Machine weight: approx. 20.6 t Accessory weight: approx. 3.4 t Equipment - Up’n Down bending die, automatically controlled by POS 3000 - Upper die tool clamping, hydraulic - Bending die tool clamping, hydraulic - Motorized central crowning - Motorized bending die adjustment, program-controlled - Bending center optimization via bending center adjustment - Foot switch - Protection of operation from the rear, controlled by a light curtain and safety PLC - Safety package EVOLUTION UD with tool changer incl. safety fence - Speed optimizer Z-axis drive (max. axis speed: 120 mm/s) Control system: POS 3000-3D graphic control View of product and machine in 3D – display Radius-Step-Bending function Stop system Positioning stop 10 - 3400 mm in U-shape with 4 sectors (850/1700/2550/3400), Panel for individual positioning of the control, pneumatic lowering of the stop fingers, steel balls in the support table. Angle stop left and right 1500 mm. The support plates are divided and can be removed individually to create the necessary space for existing counter-bends. - 2 pneumatically lowerable angle stops mounted on the frame - Front stop function of the bending die for accommodating bending rail finger segments incl. 2 finger segments matching the bending rail Fully automatic tool changer Tool changing portal for upper die tools with hydraulic tool clamping (total 7 axes) for maximum upper die tool height of 400 mm, two asynchronously movable tool changers each with three gripping units Upper die tool Tools WZS 2000, approx. 1000 N/mm2 tensile strength • Tool set for automatic tool changer, upper die Goosefoot set h= 180 mm incl. corner pieces left and right. Bending die tools Tool system for the bending die WZS 3000, approx. 1000 N/mm2 tensile strength Bending rail "A", segmented, stepped, b= 15 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm Bending rail "A", segmented, stepped, b= 20 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 20 mm •Bending rail "A", segmented, b= 30 mm h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 30 mm Lower die tools Lower die rail with recesses segmented, same radius as upper die tool b= 117 mm h= 40 mm Total length 3.240 mm, divided into 4 x 500, 2 x 620 mm All information is without guarantee. A demonstration under power is possible at any time by arrangement.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN4407, Technical data: IHF Jungenthal manipulator handling device, lifting aid, lifting arm Model Vector 180 (180 kg payload) Payload at full extension 75 kg (dependent on equipment/configuration) Height: approx. 3.75 m Upper arm length: approx. 3.2 m Reach: approx. 1.5 + 1.35 + 0.8 m = 3.65 m, articulated arm (height 2 m) Working radius 2.4 m, lift 1.4 m Total weight approx. 750 kg Dowel plate 75x75 cm Attachment/mounting equipment for round material/shafts, etc. (see images) Swivel range 360° Manipulator is disassembled and immediately available. Item location is 75053 Gondelsheim See images Rjdpfx Apszv E Dwo Eocf Shipping by freight forwarder or collection only after prior arrangement.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2693/4533, Technical data: IHF Jungenthal manipulator, handling device, lifting aid, lifting arm Model Vector 130 (130 kg payload) Manipulator available in quantities of 2!!! Payload at full extension: 30 kg (dependent on equipment/configuration) Height: approx. 4.2 m Upper arm: approx. 3.2 m Reach: approx. 1.6 + 1.9 m = 3.5 m to the articulated arm (height 2.1 m) Working radius 2.4 m, lift 1.4 m Total weight approx. 600 kg Mounting plate 75 x 75 cm Mounting/attachment equipment for tire handling (see pictures) Swivel range 360° Manipulator is disassembled and immediately available. Rcodezv Et Espfx Ap Ejf Item location is 75053 Gondelsheim See pictures Shipping via freight forwarder or collection only by prior appointment.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Used 4-axis CNC machining center Manufacturer: Homag Type: BAZ 211 Venture 21L Year of manufacture: 2010 Highlights! - Flex 5+ unit - PowerEdge gluing unit - MPU drilling head - and more Console table with 8 manually adjustable consoles, 2 vacuum cups each, side and end stops, LED position indicator for vacuum cups 6 sets of extraction rails, vacuum connection for templates WORKPIECE PARAMETERS: – Workpiece dimensions / work table: 4175*1550 mm – Workpiece thickness: – Max. 300 mm including clamping devices for milling; with standard clamp max. 60 mm; gluing: max. 40 mm – Up to max. 60 mm with standard clamp SAFETY AND PROTECTION DEVICES: CE compliant; SAFETY GUARD ON THE RIGHT WITH DOOR left and rear: wall mounting! Tooling: Rcodpszp Edqsfx Ap Ejf 18 kW spindle and 18-position tool changer (turret) + 10-position turret changer, C-axis and interface for Flex5+ unit MPU drilling head with 30 spindles (V20/H10/S360°) (integrated swivel axis 0-185°) Flex5+ sawing/drilling/milling unit Power Edge 360° gluing package with pre-trimming station and 1-roll Blowing nozzle for workpiece edge 2* combined edge/radius milling and pull blade unit Tool change station on the right VACUUM PUMP 100/140 m3/h Control: POWERCONTROL PC85 CONTROL PANEL FOR PROGRAM START; WOODWOP Version 6.0 DOCUMENTATION AND CONTROL TEXTS: GERMAN Delivery includes only the tools and HSK chucks shown in the pictures!

Condition: new, functionality: fully functional, power: 8.09 kW (11.00 HP), color: orange, overall weight: 1,000 kg, Year of construction: 2024, operating hours: 1 h, OFFER!! Old price: €8,925 gross Now: €8,8508 gross! (We also offer the larger VIP 12 mini excavator with a 3-cylinder KUBOTA engine and a gross weight of 1,200 kg – now at a special price of €11,300 gross!) Mini Excavator VIP10 Articulated Boom - Professional and durable. The VIP10 RS model is the perfect equipment for the most demanding construction, electrical, plumbing, repair, and service companies in similar industries. The VIP10 RS model is also equipped with extendable tracks and a pivoting boom, making working in tight spaces much easier. We also guarantee after-warranty service. Mini excavators are manufactured on the basis of and under the supervision of European technicians. The equipment is built on a strong structure and can operate in all conditions. BUCKET: (3 buckets are included in the price) - 300 mm - 500 mm - 800 mm We also have: - Swivel bucket - Auger - Grab - Ripper tooth - Rake Rjdpfx Aevzxl Aep Eocf - Quick coupler - Demolition hammer TECHNICAL DATA: - Weight: 1,000 kg - Digging depth: 1,568 mm - Width: approximately adjustable (800 mm - 954 mm) - Engine: Koop - Number of cylinders: 1 cylinder - Fuel: Diesel Power: 8 kW / 11 HP - Rotation speed: 10.5 rpm - Gradeability: 30° - Pump type: Gear pump - Pressure: 16 MPa - Oil flow: 16.6 l/min - Color: yellow/orange DIMENSIONS: - Wheelbase: 914 mm - Track length: 1234 mm - Upper chassis clearance: 453 mm - Counterweight turning radius: 660 mm - Chassis width: 954/800 mm - Track width: 180 mm - Transport length: 2850 mm - Seat-to-ground height: 1525 mm - Overall height: 2211 mm - Left arm swing: 363 mm - Right arm swing: 325 mm WORKING RANGE: Ground digging radius: 3039 mm Digging radius: 3136 mm Max. digging depth: 1568 mm Max. digging height: 2646 mm Max. unloading height: 1876 mm Maximum vertical digging depth: 1377 mm Raised blade height: 141 mm Lowering depth Dozer blade: 200 mm - 3-circuit control system for e.g., drill - hammer operation, etc. - LED work lights PRICE: €7,150 net €8,508.5 gross - INCLUDES 3 excavator buckets (300, 500, 800) - For machines regularly serviced by us, we EXTEND the WARRANTY to TWO YEARS - FREE 12-MONTH WARRANTY - after this period, we offer all original parts if needed! - FREE delivery within a 200 km radius - Sales possible WITHOUT TAX (only with VAT number) - FINANCING available - We are always at your disposal! KINGWAY GERMANY is the only stationary distributor of the Kingway brand in Germany. Only here can you inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the headquarters of Kingway in Germany. We have a huge selection of machines in stock, with around 100 available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we also offer our customers access to all spare parts and mobile service. KINGWAY GERMANY Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, mileage: 1 km, power: 11.03 kW (15.00 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,700 kg, empty load weight: 1,700 kg, operation weight: 1,700 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2026, Equipment: additional headlights, hydraulics, GG1700 3 cilinder kubota . Professional new excavator model: GG1700 from the international brand Günter Grossmann. Every Günter Grossmann machine comes with a company warranty. The GG1700 model is a great piece of equipment for the most demanding construction, electrical and plumbing companies. We guarantee service after the equipment warranty. Excavators are manufactured on the basis of advanced technology. We have all parts for our brand machines in stock in Europe Price EUR 16600 (excl. VAT) (Including: Excavator GG1700 + bucket 400 mm) SPECIFICATIONS Model: GG1700 Brand: Günter Grossmann Weight: 1700kg Joystick: Yes Extendable Tracks: Yes Movable swivel arm: Yes Engine brand: KUBOTA D902 Power: 25 HP Pump: TF PSA12NOO Distributor: TF TKM15BX-08LP 01 Rotary Motor: Eaton VS Drive Motor: Eaton USA Driving speed: 0-8.5 km/h MEASUREMENTS Rcsdpfx Aohlv N Iep Eof Total length:: 3585 mm Total width: 1300 mm Total height: 2362 mm Minimum ground clearance: 1605 mm WORKING RANGE max. digging depth: 2300 mm Maximum digging radius: 4050 mm Maximum dump height: 2550 mm ACCESSORIES Bucket 300mm: 260 Eur ex Bucket 400mm: 300 Eur ex Bucket 600mm: 330 Eur ex Bucket 1000mm: 400 Eur ex Log grab: 600 Eur ex Ripper: 320 Eur ex Rake: 320 Eur ex Drill: 1800 Eur ex Quick coupler: 450 Eur ex Demolition Hammer: 1800 Eur ex

Condition: new, functionality: fully functional, power: 10 kW (13.60 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,035 kg, empty load weight: 1,305 kg, operation weight: 1,350 kg, lifting height: 2,150 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 08/2026, emission class: euro5, mast type: other, brakes: other, suspension: steel, Year of construction: 2026, operating hours: 2 h, Equipment: additional headlights, adjustable boom, hydraulics, low noise, rubber tracks, standard shovel, Mini Excavator GT JAPAN1000J Crawler Mini Excavator The GT JAPAN1000J mini excavator, in its new and improved version, is a compact machine weighing 1035 kg, designed for precise excavation work in confined spaces. Thanks to its adjustable width of 750–950 mm, it is ideal for narrow passages, private properties, gardens, and urban environments. Perfect for excavation work for installations, foundations, fences, and for clearing and leveling tasks. Kubota D722 engine – reliability and power The machine is equipped with a 3-cylinder Kubota D722 diesel engine with an output of 10.2 kW at 2500 rpm. This engine is known for its smooth operation, low fuel consumption, and high durability. This ensures that the mini excavator delivers stable and efficient performance, even under heavy use. Advanced hydraulic system Redpfx Aszrqpkjp Eocf The GT JAPAN1000J is equipped with a double gear pump with a capacity of 25 l/min and a Load Sensing valve system, which ensures smooth, precise, and energy-efficient operation. The working pressure of 16 MPa guarantees sufficient power for demanding tasks, while the maximum drawbar pull of 19 kN ensures good mobility on difficult terrain. Precision and ease of operation The mini excavator features ergonomic joysticks that enable intuitive and precise control. The swivel boom (54° to the left / 59° to the right) significantly facilitates working along walls and obstacles, while the extendable tracks provide extra stability and adaptation to different working conditions. Compact dimensions and mobility The total length of the machine is 3005 mm, the height is 2160 mm, and the width is adjustable from 750 to 950 mm. The turning radius at the rear is only 510 mm, which allows operation in very confined spaces. The ground clearance at the rear is 380 mm and the minimum ground clearance is 140 mm, which facilitates driving on uneven terrain. The tracks with a width of 180 mm and a length of 1330 mm provide stability and good grip. Technical data Weight 1035 kg Engine Kubota Configuration 3-cylinder diesel Rated power 10.2 kW / 2500 rpm Maximum drawbar pull 19 kN Type of hydraulic pump double gear pump Main pump output 25 l/min Working pressure 16 MPa Type of control valve Load Sensing valve Fuel tank capacity 15 l Arm digging force 5.5 kN Bucket digging force 6.5 kN Joystick Yes Swivel boom Yes Extendable tracks Yes Travel drive Two travel speeds Bucket capacity 0.02 m³ Travel speed 2.1 / 4 km/h Platform rotation speed 13 rpm Boom swivel angle left 54° / right 59° Grading ability 30° Maximum digging height 3060 mm Maximum dumping height 2150 mm Maximum digging depth 1870 mm Maximum digging radius 3410 mm Maximum reach at ground level 3350 mm Turning radius rear 510 mm Overall length 3005 mm Overall width 750–950 mm Overall height 2160 mm Ground clearance rear 380 mm Minimum ground clearance 140 mm Track width 180 mm Track length 1330 mm

Condition: new, functionality: fully functional, mileage: 1 km, power: 10 kW (13.60 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,000 kg, empty load weight: 1,000 kg, operation weight: 1,000 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, first registration: 07/2026, emission class: euro5, shovel volume: 0.2 m³, digging bucket width: 4,200 mm, Year of construction: 2026, machine/vehicle number: GT1000, Equipment: additional headlights, adjustable boom, adjustable chassis, steel tracks, GT1000 mini excavator Mini excavator The GT1000 mini excavator is a lightweight and exceptionally maneuverable machine weighing 1000 kg, designed for precise earthmoving, installation work, and landscaping. Thanks to its compact dimensions, this machine is ideal for locations with limited space, such as private plots, narrow passages, or work inside buildings. Engine The machine is equipped with a reliable Yanmar 3TNV70 engine that meets the EURO 5 emission standard. The engine, with an output of 13.6 hp (10 kW), ensures stable, quiet, and fuel-efficient operation, which guarantees high reliability and a long service life. Work equipment and operation The GT1000 mini excavator features a precise hydraulic system that is operated via ergonomic joysticks. The counter-cylinder on the boom provides extra protection for the working parts and increases safety during operation. The standard bucket with a width of 420 mm and a capacity of 0.02 m³ enables precise digging work. Working range The GT1000 offers a maximum digging depth of 1680 mm and a maximum digging height of 2490 mm. The dumping height is 1760 mm, and the maximum digging reach on the ground is 2430 mm, ensuring efficient execution of basic earthworks. Maneuverability The minimum digging radius is 1340 mm, and the turning radius of the platform is only 733 mm, ensuring very good maneuverability in tight spaces and easy operation of the machine. Rcsdpezifkqofx Ap Eof Dimensions The total length of the machine is 2650 mm, the total width is 930 mm, and the total height is 2200 mm. Thanks to its compact design and extendable tracks, the machine is easy to transport and deploy in confined spaces. Technical data Model GT1000 Engine Yanmar 3TNV70 EURO 5 Weight 1000 kg Power 13.6 hp Bucket width 420 mm Bucket capacity 0.02 m³ Joystick Yes Counter-cylinder on the boom Yes Swivel boom Yes Extendable tracks Yes Max. digging reach on the ground 2430 mm Max. digging depth 1680 mm Max. digging height 2490 mm Max. dumping height 1760 mm Turning radius 1190 mm Min. digging radius 1340 mm Max. lifting height dozer blade 175 mm Total length 2650 mm Total height 2200 mm Total width 930 mm Total track length 1100 mm Platform swing radius 733 mm Ground clearance upper structure 380 mm Undercarriage width 950 mm Track width 180 mm Track width 320 mm

Year of construction: 2026, condition: new, Suitable for automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc electroerosion process. Accessories: Total enclosure, SK 40 or 50 workpiece carrier according to preference, Cooling unit for dielectric, Automatic fire extinguishing system, Measuring probe, SK 40 or 50 measuring mandrel depending on workpiece carrier, Alphanumeric keyboard for data management, Software package for peripheral machining of end mills and jointing cutters, linear machining in all common axis directions, Software package for compact and radius machining, profile cutters in path-travel and plunge-cutting processes, Software package for profile tools, 4-path program for peripheral electrodes, Software package for circular saws for complete machining of tooth backs and flanks of all common geometries, Automatic central lubrication, Rcedpfey T It Eox Ap Ejf 1 short dressing holder, 1 mounting flange for erosion wheel. Machine is brand new!! Originally packed and full warranty from Vollmer! Cutter outer diameter: max. 250 mm Shank tool diameter: from 10 - 100 mm Outside diameter of disc-shaped tools: 380mm cutting length: Max. 20 mm Cutting length: Max. 20 mm Tangential clearance angle: max. 6 ° Radial clearance angle: -15° to + 6° Chamfering: automatic max. 70° X axis travel: 280 mm Z-axis travel: 330 mm workpiece carrier cone: SK 50 Y axis travel: 280 mm Workpiece carrier cone: SK 50 A-axis rotation range: 360° B-axis swivel range: +/- 30 ° Tool weight max: 20 kg clearance angle: 30° Dimensions L x W x H: = 1905 x 2520 x 2430 mm Connected load: 3.4 kW (400 V / 50 Hz) colour: grey RAL7045 / RAL 7047 Diameter of rotating electrode: Max. 150 mm Rotational electrode speed: 80 - 1500 rpm weight: approx. 3000 kg

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch Rsdpfx Aelthgujp Eecf * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 101-335, functionality: fully functional, Machine available starting in early October 2026. The machine can be inspected and demonstrated at the customer's site. Workpiece thickness: 8 - 60 mm Workpiece length: min. 160 mm Feed rate: 10 m/min -extendable workpiece support -motor-driven pressure bridge, PLC-controlled Rcsdozg Upwjpfx Ap Eof -1888 control panel PPC 231 U+E -1801 joint milling unit incl. 2 joint milling cutters 70x64x30 -1903 edge feeder, fully automatic -GJ 301 Glue-Jet adhesive application system incl. sensing nozzle and cartridge magazine for EVA & PUR adhesive cartridges -1912-3 printing unit, pneumatic -1918 trimming unit with pneumatic swivel 0 -12° via PLC -1827 milling unit, motor 4, pneumatic, via PLC 1832 profile milling unit (Auriga SPS) 1929 radius scraping unit, motor 2, SPS 1964 surface scraping unit 1856 release agent application at the front, cleaning agent application at the rear, spraying 1940 wiping unit Overall length: 4930 mm Weight: approx. 1430 kg

Condition: as good as new (ex-display), Year of construction: 1991, machine/vehicle number: Mü0136, Technical data: 1 Demag KBK column slewing crane NL 2x 250KG with 2 booms Payload at full radius 2x 250KG / 0.25ton payload Rcjdpfx Aeqmillop Eef Height: approx. 4.23m, UK boom: approx. 3.75 + 3.2m Projection: approx. 2+3m, hook height: approx. 3.3m + 2.75m Weight completely approx. 700 KG with 2x 250Kg Demag PK chain hoist with floor control Connection to 400V 16A, swivel range 2x 270° Crane is dismantled and packed on a pallet Good condition, see pictures Location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Shipping by courier or collection by appointment

Condition: new, thread dia. bis M 36 turning speeds max. 150 U/min thread M5 - M36 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 4.0 kW weight - pallet system 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers Rcedpfx Apey Umd Ej Ejf - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: new, thread dia. bis M 24 turning speeds max. 280 U/min thread M5 - M24 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3.0 kW weight - pallet system 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) Rsdpfjy Umdlsx Ap Escf * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert