Used Aufspannen Swivelling Table for sale (19,162)

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Gjdpfx Ajzt Ai Eop Dsbu Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: good (used), DECKEL universal table - small - , used Clamping surface 800 x 240 mm Gbsdpfxjzucr Ne Ap Dju Weight estimated approx. 0.1 t

Condition: used, well-maintained universal milling table for Gbjdpez A Hlyefx Ap Dsu DECKEL milling machine.

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - Table milling machine with swiveling milling spindle and table extensions Table milling machine with a swiveling milling spindle from -45° to +45° Stable steel cast iron construction Dynamically balanced milling head anchored to the work table Particularly robust design Smooth operation thanks to precision components and high weight Standard with right/left rotation and electronic locking during direction change 5 speeds from 3000 - 10000 min-1 Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large work table made of cast iron for lasting precision Easy operation thanks to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence cheeks included as standard Powerful industrial motors Equipment details: Milling fence Milling fence with crank/handwheel adjustment from the front With numerical display Quick-change spindle Quick-change spindle MK 4 standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenon cutting operations and for slotting Scope of delivery: Manually swiveling milling spindle from +45° to -45° Speed display via LED on the front Aluminum fence cheeks Arc milling guard Gjdjdqzcxepfx Ap Djbu Right/left rotation of the milling spindle MK 4 quick-change milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article no.: 5220728 Technical data Dimensions of work table: 2500 x 810 mm Swiveling range of milling spindle: +45 to -45 degrees Usable length of spindle with Ø 30-35 mm: 140 mm Usable length of spindle with Ø 40-50 mm: 180 mm Milling spindle stroke: 90 mm Max. tool Ø for profiling: 250 mm Max. tenon tool Ø: 350 mm Max. form cutter tool Ø: 160 mm Max. tool Ø, plunge-cutting: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 min-1 Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle Ø on the fence: 1 x 120 mm Extraction nozzle Ø under the table: 2 x 80 mm Location: In stock at 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 1996, Tilting Spindle Moulder Table Moulder Woodworking Moulder Joiner’s Moulder CASOLIN Model: F45 Year of manufacture: 1996 5 adjustable spindle speeds: 3000/4500/6000/8000/10,000 rpm Table dimensions approx. 130 x 90 cm Milling fence with fine adjustment Electric height adjustment with digital display Electric tilting from -5° to +45° with digital angle display Spindle diameter: 30 mm Matching power feeders can be found in my other listings. Condition as shown in the pictures, please also refer to the item description. Parts may also be collected by the buyer. All dimensions are approximate. All information is provided to the best of our knowledge, but without guarantee. Subject to prior sale. Items can be collected in person or shipped at the buyer’s expense. Shipping costs are indicative and may vary depending on distance and unloading options. The listed sale price is a net amount plus VAT. An invoice with VAT shown will be provided. Gsdpfx Apsx Dmnaj Djbu Warranty terms: Due to wear and tear on used parts, items are generally sold as defective – for parts donors only – and only to businesses. By placing a bid, the buyer accepts this as the basis for the purchase agreement.

Condition: like new (used), Like-new tilting and swiveling rotary table Length: 800 mm Width: 300 mm Gbjdpfsy Ul D Rjx Ap Deu

Condition: new, Year of construction: 2025, Table saw/router combination minimax tw 45c With aluminum sliding table and pivoting router spindle – high performance at a low investment Article number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and weights Net weight approx. 290 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1000 mm, Sliding table length 1000 mm Work table width 435 mm, Sliding table width 270 mm Table height 900 mm Installation information Space requirement length 1945 mm, Machine body width/depth 710 mm Space requirement width/depth 2220 mm, Working area length 1600 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm, Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400V, Power of drive motor 5.0 kW Mains frequency 50Hz Router spindle Spindle inclination 0 to -45°, Spindle speed 3500/7000/10000 min⁻¹ Gedpfjhp Rcyjx Ap Djbu Usable length of the spindle 100 mm, Spindle arbor diameter 30 mm Maximum spindle overhang above the table 130 mm Maximum router tool diameter Maximum tool diameter, plunge-cut 180 mm, Maximum tool diameter, mortising cutters 275 mm Maximum tool diameter, profile cutters 210 mm DELIVERY SCOPE Arched router guard Anodized aluminum sliding table Telescopic miter fence Aluminum fence cheek

Condition: used, Universal swivel-tilt-rotary table DECKEL type FVW, suitable for FP 2 or FP 3 (Deckel no. 62473). Table size: 700 x 240 mm. Swivel range: +/- 30° in all directions. Weight: approx. 90 kg. Gedpfoxcilrsx Ap Djbu

Condition: good (used), Machine table Type: Turn-tilt and swivel table Origin: probably WMW or TOS milling machine Size: 800 x 240 mm Clamping surface: 700 x 240 mm Number of clamping grooves: 5 Clamping groove width: 12 / 20 mm Clamping groove depth: 13 / 22 mm Gbsdpfsva D Tiex Ap Dou Stop surface: 320 x 200 mm Features: can be rotated, tilted and swiveled Dimensions: 800 x 250 x 300 mm Weight: 67 kg

Condition: new, Year of construction: 2025, Woodworking Machines, Table Saws, Minimax twf55 es Article number: 5502261 Godpfxsi Dphto Ap Djbu Stable steel and cast iron construction Anodized aluminum format sliding table Large-sized cast iron milling head, swiveling up to -45° backwards Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Display for height and inclination, accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for lasting precision Powerful 5.0 kW industrial motor Arc milling hood included Made in Italy Dimensions and Weights Length (product) approx. 1200 mm Width/Depth (product) approx. 2000 mm Weight (net) approx. 510 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1200 mm Work table width 530 mm Table height 900 mm Sliding table length 1200 mm Sliding table width 360 mm Sliding table height 142 mm Installation information Space requirement length 2800 mm Space requirement width/depth 2910 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1200 mm Machine body width/depth 846 mm Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Power of drive motor 5.0 kW Milling spindle Spindle inclination 0 to -45° Usable spindle length 125 mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Milling spindle speed display LED on the front of the machine Spindle arbor diameter 30 mm Milling tool diameter max. Tool diameter max. 240 mm Tool diameter max. with lowering 230 mm Tool diameter max. for profile milling 240 mm Tool diameter max. for mortise milling 320 mm EQUIPMENT Equipment Aluminum sliding table ✔ Milling fence Heavy-duty professional version with hold-down, protective cover and aluminum milling fence cheeks Telescopic miter fence with two folding stops Extension table ✔ Arc milling protection hood ✔ Eccentric clamp ✔ Handle on the sliding table ✔ Spindle height adjustment manual Spindle inclination adjustment manual Control manual height and swivel adjustment of the milling unit Position of control elements on the machine body Location: In stock 54634 Bitburg - immediately available -

Condition: used, Univ. Schwenk-Tilting-Rotary Table DECKEL Universal tool and milling machine mounting table, suitable for FP 2L, FP 3L or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with a scale - Can be tilted +/- 15 degrees from/towards the machine Godpfx Apjd E A I Ne Djbu - Can be swiveled +/- 15 degrees - Swiveling table, tilting table, angular table Permissible load max. 1000 kg Weight: 400 kg Good condition

Year of construction: 1990, condition: used, machine/vehicle number: xxxx; Lg-Nr. 17250, Technical specifications: - Load capacity approx. 200 kg - Outreach 800 mm - Working height in horizontal position approx. 1000 mm Gbedodd Ilxspfx Ap Dsu - Boom arm can be rotated to the left and right by motor - Boom arm can be tilted manually - Grinding wheel can be rotated to the left and right by motor - Grinding wheel speed can be adjusted continuously - Grinding wheel diameter 300 mm - Swiveling control panel with ESAB control unit, - Type 6 PTF, year of manufacture 1997 - Space required approx. W 1100 x H 1300 x D 1600 mm - Weight approx. 300 kg

Condition: good (used), Manufacturer: WMW Machine type: FUW 200/1 WMW Auerbach Machine number: Type / Model: Turn-tilt-swivel table Table top: 540 x 245 mm Clamping surface: 460 x 175 mm Stop surface: 290 x 195 mm Slot width: mm Godpfxjuan Rme Ap Debu Groove spacing: mm Table cross adjustment: 135 mm Equipment: rotatable, tiltable and swiveling Condition: good Weight: 80 kg Dimensions: 550 x 500 x 300 mm

Condition: used, Univ. swiveling-tilting rotary table Mounting table for Univ. tool grinding machine Table size: 630 x 250 mm Slot width: 14 mm Rotatable and tiltable: +/- 30° Swiveling: +/- 45° - 4x T-slot Weight: approx. 120 kg Gbodpjgp T D Njfx Ap Dsu

Condition: used, Year of construction: 1990, Expert Eda450 Size of table plate 450 mm weight of the machine ca. 380 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Gbsdpfxef Nlrqs Ap Deu

Condition: used, Year of construction: 1985, functionality: fully functional, Universal rotary, swivel, and tilting table from MAHO 800 with mechanical Y-axis adjustment via handwheel. Gsdpfxjb I Irws Ap Debu

Condition: new, Year of construction: 2026, NIVEAU - Lift table HS 300 midi incl. swivelmax Description: ᐳ Mobile scissor lift table with platform base frame and 4 holes for holding pins; 4 swivel castors, 2 of which have brakes; wheel Ø 125 mm; operated via foot pump Load capacity in kg: 300 Weight in kg: 85 Effective stroke in mm: 610 Overall height in mm: 400 Overall height in mm: 1010 Platform size in mm: 1200 x 740 Inclusive ! Swivelmax - platform swivel frame with 2-position locking (vertical/horizontal) Godpfx Apetgychj Debu for panel weights up to approx. 120 kg. The swivel frame can be mounted on the platform base frame of the HS 300 midi in just a few simple steps. Even large-format panels can be swiveled from the vertical to the horizontal position by one person without any effort using this accessory. Size of the panel pivoting frame 1800 x 1480 mm Location: ex stock 54634 Bitburg - available immediately -

Condition: used, machine/vehicle number: 2414-0075 bzw. 2314-0703, Tabletop clamping surface: 520 x 1000 mm Gjdpfeb Hmbpex Ap Dsbu 6 clamping slots: 16 mm Slot spacing: 90 mm Clamping plate can be rotated horizontally to the right and left by: 45° each Can be tilted towards/away from the machine by: 15° each Can be swiveled to the right and left by: 15° each Permissible load, movable: approx. 1000 kg Permissible load, fixed table: approx. 1500 kg Weight: 376 kg Suitable for DECKEL milling machines: FP 3 L; FP 3 LG; FP 3 LV

Condition: used, Rotating Boring Table Gbjdpfxjz Nxmkj Ap Dsu Travel X: 2000 mm Table size: Length 1240 mm x Width 1250 mm Bench width: 1030 mm Diameter of the ball screw: Ø 70 mm 2 motors INDRAMAT: 1 travel X motor + 1 table rotation motor Supplied without electrical panel (electrical cabinet to be redone) Protector hennig in average condition Ideal part for retrofitting Total bench length: 5200 mm Width: 1900 mm Height: 900 mm Weight: approx 7 T

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 210 x 570 mm -T slots: 3 - rotatable and swiveling -Fits Deckel Mikron WMW and other milling machines -Weight: 95 kg Gjdpfsb A Iccex Ap Debu

Condition: used, Year of construction: 1980, Used machine Year of manufacture: 1980 Godez Dyd Sjpfx Ap Dobu Table size 1100 x 760 mm Motor 4.7/5.7 kW, pole-changing with right/left rotation Milling arbor MK 5 / 30 mm Height and swivel adjustment via handwheel Spindle speeds 3000/4500/6000/9000 rpm Swivel range of the milling arbor -5 to +45° Milling stop with Panhans cast iron stop jaws mounted on a round insert plate and thus rotatable by 360° with Haffner 4-roller feed device Weight approx. 850 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2022, DOUBLE-SWIVELING SAW UNIT: MAXIMUM CUTTING HEIGHT WITHOUT COMPROMISE. RIP FENCE FULL SUPPORT & WIRELESS: APPLICATION AND PRECISION MECHANICS. CONSOLE eye-S: THE USER-FRIENDLINESS OF ACCESSING ALL FUNCTIONS VIA THE CONTROL. Technical data Linvincibile si x Max. cutting height at 90° (mm) 200 with 550mm saw blade Max. cutting height at +45° (mm) 130 with 550mm saw blade Max. cutting height at -45° (mm) 105 with 550mm saw blade Saw blade swivel angle (degrees) -46 ÷ +46 Raising and swiveling of the saw unit programmable Control/work height display Easy Touch Saw blade speed (rpm) 3000 ÷ 5000 (inverter) Main motor power kW (hp) 9 (12) Hz50 Format cuts: - with carriage 3200 (mm) - with carriage 3800 (mm) 3200x3200 3800x3200 Cutting width with parallel fence (mm) 1600 Dust extraction port diameter: - on the frame (mm) - on the saw blade guard (mm) - on the riving knife (mm) 120 100 Standard equipment: - Rip fence completely in aluminum structure with guiding system on dovetailed, hardened, and arc-ground steel guides with large contact area - Version with rip fence 3200 mm - 10-year warranty on the guiding system of the saw carriage - On/off switch for main saw/scorer on the rip fence - eye-S 15" electronic control unit complete with: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental mode: - Height adjustment of the main saw blade - Tilting of the saw unit - Parallel fence adjustment - Height and side adjustment of the scorer (the scorer is automatically raised to the set position when the power is turned on, and lowered when the power is turned off) * Speed adjustment with frequency converter * Operator assistance functions for performing complex cuts * Possibility of saving up to 1000 programs with relative images * Possibility of saving up to 1000 different tools with relative images * Cutting sequence control from preloaded parametric machining programs * Environment for creating and saving new sequential work programs * Automatic acquisition of work dimensions from the Thundercut app * USB port * Preparation for network connection - Auxiliary function of the electronic control with: * Determination of the correct stop position on the fence for format machining with a tilted saw blade * Determination of the correct stop position on the fence for angled cuts with a miter fence on the work table with or without a tilted saw blade - Swiveling control panel over the table - Programmable parallel fence with THK guide-controlled axis and guided by a stable ball screw with a travel speed of 25 m/min. - Parallel fence can be completely swung away under the work table, cutting width on the parallel fence 1600 mm - Support arm for the rip fence with positioning on prismatic linear guides with ball bushings - "Full Support & Wireless". Frame for miter cuts complete with wireless function. Adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system on magnetic strip and LCD display. Real-time updating of the position of the fence, with 3 LCD displays, when changing the saw blade swivel and/or the cutting angle. - Motor power 9kW (12hp) 50Hz - 11kW (15hp) 60Hz - Inverter for electronic speed control from 3000 to 5000 rpm Gjdpfx Apjz Ny R Re Debu

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: completely inspected by the workshop Table size 2000 x 880 mm (entire table in a cast construction) with extendable frame support Drive motor with pole change, 5/6 kW Spindle speeds 3000/4500/6000/9000 rpm Vertical adjustment of the milling spindle 110 mm Swivel angle of the milling spindle 45° with Holz Her 3-roller feed mechanism Pictures show the machine in a condition prior to refurbishment. Gbodpfx Apoz Dcp Do Dou Availability: approximately 3-4 weeks after order receipt Location: Flörsheim

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Working area, Y-axis: 1,250 mm Max. panel thickness: 85 mm Number of controlled axes: 3 Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Milling unit Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 9 kW Automatic tool changer: yes Gbjdpfez En Afex Ap Deu Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Control system: PC Control Programming software: WoodWOP 5.0 EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, cutting length (max.): 3,450 mm, The machine has been completely overhauled by the manufacturer! TECHNICAL DETAILS Sawing unit Cutting height: max. 155 mm Cutting height at 45°: max. 105 mm Saw blade diameter: max. 450 mm Saw blade arbor: 30 mm Swivel range: 0–46° Motor power: 5.5 kW Speed: 3,000 / 4,000 / 5,000 / 6,000 rpm Gjdpfx Apez Irygo Djbu Cutting range Cutting width: 1,250 mm Cutting length: 3,450 mm Sliding table length: 3,200 mm Cross slide and stops Digital folding stops: 3 Cross slide extendable up to: 3,500 mm Positioning accuracy parallel stop: 0.1 mm EQUIPMENT Scoring unit Auto-EPS with electromechanical side and height adjustment Electrically controlled parallel stop Electrically controlled axis adjustment Cross slide with 3 digital folding stops Machine completely overhauled by the manufacturer Sliding table completely re-adjusted Linear guide rail converted to a new digital system with 3 stops Stainless steel scale for angle adjustment renewed Cross slide checked 90° locking of the fence completely renewed Electrical system checked Machine re-adjusted, checked, and lubricated German-language documentation