Used Swivel Spindle for sale (14,462)

Condition: new, Year of construction: 2025, Spindle swivels: + 45.5° to -45.5° Height adjustment: electric Swivel adjustment: electric Stop adjustment: electric Height display: digital Pivot angle display: digital Milling stop display: digital Spindle diameter: Speeds: infinitely variable from 900 - 12000min¯¹ Iodpfx Asiqg N Noqpjtg Power consumption: 7.5 kw Motor brake: Yes, automatic Suction connection: 3 x 100 mm, 1 x 120 mm Machine length: 2540 mm Machine width: 1195 mm Weight: 950 kg

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Iedsyi A Tdspfx Aqpjtg Storage location: Nattheim

Condition: used, Used machine Iodpfx Aqsy R Halepstg Year of manufacture: 2007 Equipment and technical data: - Motor 4.7/5.7 kW, pole-switchable - with right/left rotation - Milling spindle MK 5 / 30 mm - Height adjustment via handwheel - Speeds: 3000/4500/6000/9000 rpm - Milling fence with metal jaws, mounted on a round insert plate and thus rotatable 360° - With table extension on both sides with extendable frame support - With attached roller table on the left side - With 4-roller feed unit, year 2007 - Dimensions: 240x65x120 cm - Weight approx. 900 kg Availability: short notice Location: 63934 Röllbach

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), height adjustment type: electric, Tiltable spindle moulder HOFMANN TFS 107 Basic equipment: 7.5 kW motor, 400 V, 50 Hz, table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings Electronic starting and braking device Electric height and swivel adjustment in rapid and creep speed accurate to 1/10, height adjustment approx. 145 mm, swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Itsdpfx Asu Nz Ndeqpjg Paint finish: gray-white/signal blue Electrical connection value: Motor power 7.5 kW - Minimum fuse (A) slow blow 30 Additional equipment installed in this machine: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Infinitely variable speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, instead of standard motor with soft start - HOFMANN milling fence type 2620 instead of standard fence 2601 Efficient Total adjustment via handwheel according to display incl. option to switch to tool zero dimension. Digital display for individual jaw adjustment. Including quick clamping system for the fence jaws - 2 cast iron fence jaws 500/500 mm - Guide rails and fillet board, consisting of 5 rulers, 1 fillet board, 10 sliding blocks - Control panel upwards - Tool compartment for TFS 107 (only possible with top console) - Operating instructions TFS 107 German

Condition: used, reus 3500/6000/8000/10000 U/min Spindle diameter 30 mm Motor output 4 kW Iedpfx Aqoy Nd Uqspstg Holzkraft / SCM Minimax T 55i tilting spindle moulder or bench router for precise routing, profiling and rebating of solid wood and wood-based materials. The machine has a swivel milling spindle and sliding carriage, enabling versatile processing at different angles. Ideal for joineries, furniture construction and interior fittings. Includes feed unit, angle fence and equipment for finger joints in drawer construction.

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Itsdjw Enw Ispfx Aqpjg

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Tilting Spindle Moulder MAKA SF 4510 / GRIGGIO with Power Feed Very good condition, the machine comes from a small village carpentry shop with 3 people. Everything works perfectly. All bearings and guides are in excellent condition; the machine runs very smoothly. Equipped with a moulder fence, with one fence jaw adjustable in depth and featuring fine adjustment with scale, enabling jointing work, e.g., for a glue joint profile. The entire fence can also be adjusted via a set screw, allowing for very precise settings. With spindle locking via clamping lever. Chip extraction is very effective, with two 120mm diameter extraction ports on the fence and machine. Comes with a 30mm spindle, continuously tiltable from -5° to 45°, adjusted via handwheel, with a precise degree scale. Selectable clockwise/counterclockwise rotation. We deliver the machine in person anywhere in Germany for 220.00 EUR and carry out a demonstration, so you have no risk with your purchase. Delivery to other EU countries is also possible. Large table opening, adjustable with rings (this allows the use of cutters with a very large diameter and safe cutting with small cutters). Spindle speeds: 3200, 4200, 6000, and 8000 rpm. Spindle height adjustment via handwheel with locking screw. Iodpoy Rh Nzofx Aqpetg Spindle is exchangeable (a 40mm spindle can also be used). Optimal power transmission via V-belt drive. Machine table is 1070mm wide and 940mm deep. The machine is ready for immediate use. 380V, 5500W, with motor protection switch against overload. Year of manufacture: 1999. Weight: approx. 700kg. The machine has a CE certificate. Comes with manual, motor brake, and emergency stop switch, fully compliant with all requirements of the woodworking trade association (Holz-BG). Included is also a 3-roller power feed from HAFFNER with 8 speeds. Optimal, simple, fast, and safe operation.

Condition: used, Year of construction: 2013, machine/vehicle number: AB214206, functionality: fully functional, operating hours: 100 h, power: 7 kW (9.52 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, pivoting range: 90 °, rip fence adjustment: manual, actuation type: manual, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, table width: 810 mm, table length: 2,500 mm, total length: 2,500 mm, total width: 1,250 mm, overall weight: 640 kg, Equipment: CE marking, We offer this Casadei F25 swivel spindle milling machine, year of construction 2013, but uses only few weeks. Spindle tiltable -45 to 45° Height adjustment: Handwheel Tilt adjustment: Handwheel Height and angle display: mech. counter display spindle diameter: 30 mm spindle speeds: 3000, 4500, 6000, 8000, 10000 rpm power input: 7 kW Itsdpfoy Drraox Aqpsg Suction connection: 1 x 120mm, 2 x 60mm Machine length: 2500mm Machine width: 1250mm Weight: 640kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), For sale is a used Felder spindle moulder F-900 Z with mortising and slotting table length of 1300 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 5 spindle speeds - Spindle tiltable 90° - 45° - Fence for tooling up to Ø 230 mm - Multi-adjustment system - Mortising and slotting table 1300 mm - Electrically height-adjustable and tiltable with "PowerDrive" - Motor power 7.3 kW / 9.9 HP SD-Start Iedpfsw Hfd Ijx Aqpstg - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299. Related terms: spindle moulder, milling machine, moulding Reference: R-A0117

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: Iodpfxexwz Rce Aqpstg - Spindle clamping length: 180 mm - Spindle tilting range: -10° to +45° - Motorized spindle stroke with fine adjustment - Motorized spindle tilting - Motor: 5.5 kW - Table size: 1200 x 730 mm - Maximum table opening: 420 mm - Motor brake - Spindle speeds: 3000 / 4500 / 6000 / 7000 / 10000 rpm - Speed display - Extraction port: 125 mm - Equipped with Aigner integral fence - With 3-roller power feeder Availability: short-term Location: Röllbach

Condition: excellent (used), ZVE152724 Swivel Motor Spindle 24000 HSK-T40 Milling spindle for HT45PM Supplier: Siemens Weiss Technical data: Speed: 24,000 rpm Torque: 21.5 Nm (S1) Power: 11 kW (S1) Interface: HSK-T40 Clamping torque: 300 Nm Lubrication: Grease; lifetime lubricated Drawing no.: 180020 Itodpfx Aoxxamfoqpog

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, power: 11 kW (14.96 HP), spindle diameter: 40 mm, overall weight: 1,500 kg, milling spindle length: 150 mm, Double-sided swivel unit bearings with two sturdy segment guides, modern steel construction column, heavy-walled, heavily ribbed cast iron table, Itodpswcpqqofx Aqpsg replaceable milling arbor, three-phase motor with 4 speeds, electric height and tilt adjustment in rapid and creep speed, and electronic digital display, incremental dimension switching for height adjustment, milling stop with fine adjustment and metal stop jaws and replaceable aluminum splinter guards, extraction nozzles on the milling stop and below the table, each 120 mm in diameter, minimum extraction speed at the extraction nozzle: 20 m/s, rotating table insert, locked reversing switch for left and right rotation, lockable main switch, cam switch, automatic motor brake Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW MK 5 milling arbor mount Speeds 3000/4500/6000/9000 rpm Mill arbor swivel range: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, including extendable frame support Stepless 4-roller feed 2-axis control Mill arbor with 40 mm diameter and 150 mm length

Condition: as good as new (ex-display), Year of construction: 2026, Swivel spindle: Yes 0 to 45° Height adjustment: handwheel / electric Swivel adjustment: Handwheel / electric Milling jaw adjustment: manual Height display: Digital display Swivel angle display: Digital display Milling stop indicator: mech counter Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Itedpouzkxxefx Aqpeg Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: as good as new (ex-display), Year of construction: 2018, Spindle tiltable: Yes -45 to 45° Height adjustment: Handwheel Pivot adjustment: Handwheel Stop adjustment: manual Height display: mech. counter display Swivel angle display: mech. counter display Milling stop display: mechanical counter display Isdpfsgyzzmox Aqpotg spindle diameter: 30 mm spindle speeds: 3000, 4500, 6000, 8000, 10000 rpm power input: 7 kW Motor brake: Yes, automatic Suction connection: 1 x 120mm, 2 x 80mm Machine length: 2500mm Machine width: 1250mm Weight: 510kg

Condition: as good as new (ex-display), Year of construction: 2023, Spindle tiltable: Yes -45 to 45° Height adjustment: electric Pivot adjustment: electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop indicator: mechanical counter spindle diameter: 30 mm spindle speeds: 3000, 4500, 6000, 8000, 10000 rpm power input: 7 kW Motor brake: Yes, automatic Suction connection: 1 x 120mm, 2 x 80mm Machine length: 2500mm Machine width: 1250mm Ijdpegr Ufpsfx Aqpetg Weight: 510kg

Condition: as good as new (ex-display), Year of construction: 2025, Spindle tilting: Yes, 0 to 45° Height adjustment: Electric / Position control Swivel adjustment: Electric / Position control Milling stop adjustment: Electric / Position control Iodpfewhuvcjx Aqpstg Milling jaw adjustment: Manual / Handwheel Height display: Digital display Swivel angle display: Digital display Milling stop display: Mechanical counter Aigner integral stop: Yes Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Weight: 655 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Isdpfewp Ri Uex Aqpetg Related terms: milling cutter, milling machine, milling Reference: R-D1618

Condition: excellent (used), Year of construction: 2007, Tilting spindle moulder Utis CSN Digital & stand for feed unit, feed unit by Maggi Italy Itodpfx Aqswudlyspog Year of manufacture 2007

Condition: used, Year of construction: 1995, Swivel spindle: Yes -5 to 45° Height adjustment: Handwheel Swivel adjustment: Handwheel Milling jaw adjustment: manual Height display: mech. counter Swivel angle display: mech. counter Milling stop display: mech. counter Milling spindle diameter: 30mm / new milling spindle Speeds: 3000, 4500, 6000, 9000 Itjdpfxjuzkwzj Aqpog Motor power: 5.5 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2000mm Machine depth: 1400mm weight: 900kg

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, pivoting range: 46 °, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, The new profil 92 M e-motion spindle moulder is Format4’s premium model, offering maximum operating comfort and ensuring absolute efficiency through minimal setup times during milling operations. The advanced electric spindle features an HSK 63F interface for a tool quick-change system with pneumatic clamping. The swiveling range of ±46° enables limitless machining versatility. With the self-explanatory e-motion control via a 15-inch touchscreen panel, spindle speed, spindle height and angle, as well as the fence position and even the table opening, can be set intuitively and precisely. Integrated memory for tools, spindle settings, and milling programs ensures perfect repeat accuracy and the shortest setup times. Electrically controlled, eccentric inserts provide maximum table support area and significantly reduce adjustment work, especially when swiveling the spindle. The newly developed heavy-duty precision milling fence features two powered axes for precise depth adjustment of the complete fence, plus an independent, adjustable depth stop for the right-hand feeding jaw. For convenient access during curve milling, the fence can be swung completely out of the working area. Optionally, the Format4 profil 92 M e-motion can be equipped with an electrically height-adjustable power feeder. Further technical data: - Maximum tool diameter: 250 mm - Usable spindle height: 140 mm - Height adjustment: electric Optional equipment: 12 Potential-free contact 106 HSK 63F spindle, Ø 30 mm, 140 mm 118 Integral safety rulers, 650 mm 119 Table opening 255 mm with controlled eccentric inserts 183 Table extension on both sides 670 mm with 2200 mm sliding frame 213 Electrically height-adjustable feeder support, incl. horizontal tube 220 Parts list holder with A9 clipboard Advantages: - Highly efficient electric spindle with stepless speed adjustment and HSK 63F interface - Position control for milling height and angle ±46º - Position control for milling fence including offset function - Smartouch with intuitive e-motion control system Iodpfowztr Njx Aqpetg - Table opening with controlled eccentric inserts (optional) - Electrically adjustable height for the feeder on overhead column (optional) Further information: - The electric spindle features a HSK F63 tool quick-change system - Clamping range: 2–25 mm with OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm sliding frame - Table opening 255 mm with controlled, eccentric inserts

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, 4 spindle speeds: 3000/4500/6000/9000 rpm. Right-/left-hand rotation Control panel on top Table extensions and pull-out table support Motor 4.7/5.7 kW Spindle diameter 30 mm Weight approx. 1000 kg Itodjxwxrqspfx Aqpog With feed unit WEGOMA VS 34, 3 rollers Tenoning table for cross machining

Condition: used, Year of construction: 2025, Spindle tiltable: Yes, -5 to 45° Height adjustment: manual / handwheel Spindle stroke: 142 mm Tilting adjustment: manual / handwheel Fence adjustment: manual Height display: scale Tilting angle display: scale Milling fence display: scale Itedpfoxrbihjx Aqpeg Spindle diameter: 30 mm Spindle length: 140 mm Max. tool diameter: 250 mm Speeds: 3500 / 6000 / 8000 / 10000 rpm Motor power: 5.3 kW Motor brake: Yes, automatic Table size: 1000 mm x 520 mm Sliding carriage length: 1200 mm Extraction connection: 2 x 120 mm Machine length: approx. 1200 mm Machine width: approx. 900 mm Weight: 400 kg

Condition: as good as new (ex-display), Year of construction: 2025, Minimax ti 55es LL - spindle moulder Figure shows 55 i T s standard version elite The professional craftsman machine with Swivel Milling spindle and 4 speeds. M Digital: motorized height adjustable and Tiltable Stable steel-cast iron construction Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Display of the cutting speeds by LEDs Quick and easy change of speed of eccentric tension Right left rotation Display height and inclination 1/10 mm exactly Shaper fence heavy-duty professional: with fine adjustment via rack and pinion, with numerical display, ALU stop baking, 3-fold positioned for quick repeat of setting Scope of delivery: Aluminium milling stop baking Milling wheel arch guard Extension table left and right Isdodqzh Ropfx Aqpjtg Model minimax ti 55es LL Item No. 5502252 Technical data Dimensions of the working table 2500 x 655 mm Formatschiebeschlitten commercial length of spindle dimensions 125 mm Max tool diameter 240 mm Max tool diameter lowerable 230 mm Max tool-Ø pin cutter 320 mm Spindle inclination 0-45 degree Speed 3500/6000/8000/10000 min-1 Engine power 400 V / 50 Hz / S6-40% 5.0 kW Suction nozzle diameter 2 x 120 mm

Condition: good (used), Year of construction: 1988, functionality: fully functional, Tilting Spindle Moulder SAC TS 145 Manufacturer: SAC (Süeri Alfredo SpA) Itedpfewt A Dxex Aqpog Year of manufacture: 1988 S/N: 8831 Robust spindle moulder with electrically adjustable height and tilt, powerful motor (7.5 kW), multiple speeds, and extensive equipment. Technical specifications: Spindle diameter: 30 mm Spindle stroke (height): approx. 150 mm Tilting range: −5° to +45° Height adjustment: electric, with digital display Tilting adjustment: electric, with digital display Fence adjustment: manual, with scale indicator Spindle speeds: multi-stage – 3,000; 4,500; 6,000; 8,000; 10,000 rpm Motor power: 7.5 kW Motor brake: automatic Extraction ports: 2 × 120 mm Ø (other options also 100–110 mm) Single-sided table extensions right side: roller/tenoning table/extra accessories with workpiece clamp and end stop ruler, angle adjustable Dimensions & weight Table size: approx. 1,200 × 820 mm Overall dimensions approx.: 2,200–2,400 mm (L) × 1,100–1,400 mm (W) × approx. 1,500 mm (H) Weight: approx. 1,100 kg

Condition: ready for operation (used), Year of construction: 1996, Tilting Spindle Moulder Table Moulder Woodworking Moulder Joiner’s Moulder CASOLIN Ijdpfx Ajx Dmnaeqpjtg Model: F45 Year of manufacture: 1996 5 adjustable spindle speeds: 3000/4500/6000/8000/10,000 rpm Table dimensions approx. 130 x 90 cm Milling fence with fine adjustment Electric height adjustment with digital display Electric tilting from -5° to +45° with digital angle display Spindle diameter: 30 mm Matching power feeders can be found in my other listings. Condition as shown in the pictures, please also refer to the item description. Parts may also be collected by the buyer. All dimensions are approximate. All information is provided to the best of our knowledge, but without guarantee. Subject to prior sale. Items can be collected in person or shipped at the buyer’s expense. Shipping costs are indicative and may vary depending on distance and unloading options. The listed sale price is a net amount plus VAT. An invoice with VAT shown will be provided. Warranty terms: Due to wear and tear on used parts, items are generally sold as defective – for parts donors only – and only to businesses. By placing a bid, the buyer accepts this as the basis for the purchase agreement.