Used T-Nut for sale (71,862)

Condition: new, mileage: 44 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 05/2028, color: white, gearing type: mechanical, number of seats: 3, loading space length: 3,664 mm, loading space width: 2,170 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle no.: 153234 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (ZIP 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Towbar / trailer load 3,500 kg * Heated exterior mirrors * Traction tires, rear Interior * Driver’s comfort air-suspension seat with horizontal suspension * Automatic climate control Safety Gbsdpfx Aow S Afrof Asl * Driver airbag Comfort and Environment * Reverse warning system * Lane departure warning system Additional equipment * 3-year manufacturer’s warranty from initial registration, up to 100,000 km * Exhaust system cover * AdBlue tank cover * Trailer socket with electrical kit * Dual battery cover * Batteries, 2 x 12 V/100 Ah, maintenance-free * Spare wheel holder, double-secured * Euro 6 OBD Step E * PTO (Power Take-Off) 200 Nm for hydraulic pump * Bracket and installation for hand throttle control * Hand throttle control for engine speed * Lifting/lowering device * Rear cross member at frame end * Rear underrun protection * Mounting bracket for handle tools * LED front headlights * Meiller, side wall extension to 500 mm “Trigenius” * Meiller, reversing camera * Meiller, TRIGENIUS tipper 3664 x 2170 x 500 mm * Meiller, reinforced 4 mm floor “Trigenius” * Meiller, side-mounted plastic toolbox * Hire purchase/financing or leasing via Daimler Truck Financial Service Germany (DTFSD) possible. We will be happy to prepare an offer for you. * Multifunctional front wall extension with storage frame * Payload: 3,660 kg * Frame cover, behind driver’s cab * Fuso safety package incl. floor mats * Medium mirror bracket incl. wide-angle mirror * Valve extensions * Preparation for battery cut-off relay 12V * Limited slip differential lock Miscellaneous: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all transporters: used vehicle warranty from Mercedes-Benz available for 12 or 24 months upon request. * We are happy to take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing / financing via Mercedes-Benz Bank available. We are happy to provide you with an offer. * No liability for printing & typographical errors * Subject to change and prior sale ----.

Condition: used, mileage: 318 km, power: 95 kW (129.16 HP), first registration: 03/2026, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 05/2028, color: white, gearing type: mechanical, number of seats: 3, loading space length: 3,600 mm, loading space width: 2,200 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle no.: 1537 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (ZIP code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Tow bar / Towing capacity 3,500 kg * Heated exterior mirrors Interior * Driver’s comfort suspension seat, horizontal suspension * Automatic climate control Safety * Airbag Comfort and Environment * Rear-view camera * Reverse warning system Additional features * 2-DIN 7" touchscreen radio, including Apple CarPlay, Android Auto, and hands-free system * Exhaust system cover * AdBlue tank cover * Trailer socket with electrical kit * Dual battery cover * Batteries, 2 x 12 V / 100 Ah, maintenance-free * Dropside protector * Three-way tipper, side panels and floor made of steel, 3,600 x 2,200 x 400 mm * Spare wheel holder, double-secured * Euro 6 OBD Step E * PTO (Power Take-off) 200 Nm for hydraulic pump * Hand throttle for engine speed * Rear underrun protection * LED front headlights * Lease-purchase/financing or leasing available through Daimler Truck Financial Services Germany (DTFSD). We are happy to provide an offer. * Payload 3,800 kg * Protective grilles for rear lights Gbodpfsyu Hr Isx Af Ael * Fuso safety package incl. floor mats * Short mirror arm incl. wide-angle mirror * Valve extensions * Preparation for battery isolator relay 12V * Toolbox, mounted underneath at the side * Limited-slip differential Miscellaneous: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all vans: Optional 12- or 24-month Mercedes-Benz used vehicle warranty available on request. * We are happy to take your current vehicle in part exchange, offset it against the new vehicle, or pay you the purchase amount. * Leasing/financing available through Mercedes-Benz Bank. We are happy to provide an offer. * No liability for printing & typographical errors * Subject to errors and prior sale ----.

Condition: used, mileage: 318 km, power: 95 kW (129.16 HP), first registration: 03/2026, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 05/2028, color: white, gearing type: mechanical, number of seats: 3, loading space length: 3,600 mm, loading space width: 2,200 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle number: 153420 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (Postal Code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Trailer coupling / towing capacity 3,500 kg * Heated exterior mirrors Interior * Driver's comfort air-suspension seat with horizontal suspension * Automatic climate control Safety * Airbag Comfort and Environment * Rear-view camera * Reversing alarm Gbjdpfx Aeyu Htref Asl Additional Features * 2 DIN 7" touchscreen radio, including Apple CarPlay, Android CarPlay, and hands-free system * Exhaust system cover * AdBlue tank cover * Trailer socket with wiring kit * Dual battery cover * Batteries, 2 x 12 V/100 Ah, maintenance-free * Platform side guard * Three-way tipper, side panels and floor made of steel, dimensions: 3600 x 2200 x 400 mm * Spare wheel mounting, double-secured * Euro 6 OBD Step E * PTO (power take-off) 200 Nm for hydraulic pump * Manual engine speed control * Rear under-run protection * LED front headlights * Hire purchase/financing or leasing through Daimler Truck Financial Service Deutschland (DTFSD) possible. We will be happy to provide you with an offer. * Payload 3,800 kg * Rear light protection guards * Fuso safety package including floor mats * Short mirror arm including wide-angle mirror * Valve extensions * Preparation for battery disconnect relay 12V * Tool box, side-mounted * Limited-slip differential lock Other information: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all vans: Optional 12 or 24 months Mercedes-Benz used vehicle warranty available upon request. * We are happy to accept your current vehicle as trade-in, offsetting it against the new vehicle, or pay you the purchase price. * Leasing/financing through Mercedes-Benz Bank. We are happy to provide you with an offer. * No liability for printing or typographical errors * Subject to prior sale and errors

Condition: new, mileage: 44 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 05/2028, color: white, gearing type: mechanical, number of seats: 3, loading space length: 3,664 mm, loading space width: 2,170 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle no.: 153216 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (ZIP 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Towbar / towing capacity 3,500 kg * Heated exterior mirrors * Traction tyres on rear axle Interior * Driver’s comfort suspension seat with horizontal suspension * Automatic climate control Safety * Driver airbag Comfort and Environment * Reverse warning system * Lane keeping assist Gbjdpfx Aow S Affsf Ajl Additional Features * 3-year manufacturer warranty from first registration up to 100,000 km * Exhaust system cover * AdBlue tank cover * Trailer socket with wiring kit * Dual battery cover * Batteries, 2 x 12 V/100 Ah, maintenance-free * Spare wheel bracket, double secured * Euro 6 OBD Step E * PTO 200 Nm for hydraulic pump * Bracket and installation for hand throttle * Hand throttle for engine speed * Lifting/lowering device * Rear end cross member at frame end * Rear underrun protection * Holder for stick tools * LED front headlights * Meiller, Trigenius sideboard extension to 500 mm * Meiller, reversing camera * Meiller, TRIGENIUS tipper body 3664 x 2170 x 500 mm * Meiller, reinforced floor 4mm "Trigenius" * Meiller, plastic toolbox, mounted on the side * Hire-purchase/financing or leasing through Daimler Truck Financial Service Germany (DTFSD) possible. We are happy to provide you with an offer. * Multifunctional front board extension with storage rack * Payload 3,660 kg * Frame cover behind cab * Fuso safety package incl. floor mats * Medium mirror holder incl. wide-angle mirror * Valve extensions * Prewiring for battery isolation relay 12V * Limited-slip differential Additional Information: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all transporters: Optional 12 or 24 months Mercedes-Benz Used Vehicle Warranty available upon request. * We are happy to take your current vehicle in part exchange, offset the value against your new vehicle or buy it from you outright. * Leasing/financing through Mercedes-Benz Bank available. We are happy to provide you with an offer. * No liability for typographical or printing errors. * Errors and prior sale excepted.

Condition: used, mileage: 864 km, power: 129 kW (175.39 HP), first registration: 06/2024, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 05/2028, color: white, gearing type: mechanical, number of seats: 3, loading space length: 6,100 mm, loading space width: 2,540 mm, loading space height: 2,550 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, Internal vehicle number: 153332 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (postal code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior: Gjdpfxjyvdqde Af Aebl * Heated exterior mirrors Interior: * Driver's comfort suspension seat with horizontal suspension * Automatic climate control Safety: * Driver's airbag Comfort and Environment: * Reversing warning system * Lane keeping assist Multimedia: * Radio with Bluetooth and hands-free function Other features: * 3-year manufacturer's warranty from initial registration up to 100,000 KM * 3D roof spoiler * Turn assist system * AdBlue tank cover * Dual battery cover * Spare wheel holder with double securing * Euro 6 OBD Step E * Box body approx. 6,100 x 2,540 x 2,550 mm * Baer tail lift, 1000kg capacity * LED front headlights * Hire purchase/financing or leasing available via Daimler Truck Financial Service Deutschland (DTFSD). We will be happy to provide you with a quote. * Payload 2,925 KG * Fuso safety package incl. floor mats * Extended mirror mounts, long version incl. wide-angle mirror * Day registration to Daimler Truck AG * Valve extensions * Preparation for 12V battery disconnect relay * Permissible trailer load (braked) 3,500 kg Other information: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all vans: Optional 12 or 24 months Mercedes-Benz used vehicle warranty available on request. * We are happy to take your current vehicle in part exchange, offset it against your new vehicle, or pay you the purchase price directly. * Leasing / financing available via Mercedes-Benz Bank. We are happy to provide you with a quote. * No liability for printing or typographical errors * Subject to prior sale and errors ----.

Condition: used, mileage: 473 km, power: 129 kW (175.39 HP), first registration: 06/2024, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 05/2028, color: white, gearing type: mechanical, number of seats: 3, loading space length: 6,100 mm, loading space width: 2,540 mm, loading space height: 2,550 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, Internal vehicle number: 153328 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (Postal code 49076), Prof.-Porsche-Str. 7 * Phone: Exterior * Heated exterior mirrors Interior * Driver’s comfort suspension seat, horizontal damping * Automatic climate control Safety * Driver airbag Comfort and Environment * Rear parking sensors * Lane keeping assistant Multimedia * Radio with Bluetooth and hands-free function Additional features Gedpoyvdqksfx Af Aobl * 3-year manufacturer’s warranty from initial registration or up to 100,000 KM * 3D roof spoiler * Turning assistant * AdBlue tank cover * Dual battery cover * Batteries, 2 x 12 V/100 Ah, maintenance-free * Spare wheel holder, double secured * Euro 6 OBD Step E * Box body, dimensions 6,100 x 2,540 x 2,550 mm * Baer tail lift, 1000 kg * LED front headlights * Hire purchase/financing or leasing possible via Daimler Truck Financial Service Deutschland (DTFSD). We are happy to provide you with an offer. * Payload 2,925 KG * Fuso safety package incl. floor mats * Extended mirror brackets, long version incl. wide-angle mirror * Day registration to Daimler Truck AG * Valve extensions * Preparation for battery isolator relay 12V * Permissible trailer load, braked: 3,500 kg Miscellaneous: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all transporters: optional 12 or 24 month Mercedes-Benz used vehicle warranty available upon request. * We are happy to take back your current vehicle, trade it in against the new vehicle or pay you the purchase amount. * Leasing/financing possible through Mercedes-Benz Bank. We are happy to provide you with an offer. * No liability for printing or typographical errors. * Subject to prior sale and errors.

Condition: used, mileage: 318 km, power: 95 kW (129.16 HP), first registration: 03/2026, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 05/2028, color: white, gearing type: mechanical, number of seats: 3, loading space length: 3,600 mm, loading space width: 2,200 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle no.: 153420 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (ZIP 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Trailer coupling / towing capacity 3,500 KG * Heated exterior mirrors Interior * Driver’s comfort suspension seat with horizontal suspension * Automatic climate control Safety * Airbag Comfort and Environment * Reversing camera * Reversing warning system Other features * 2-DIN 7" touchscreen radio, including Apple CarPlay and Android CarPlay and hands-free system * Exhaust system cover * AdBlue tank cover * Trailer socket with wiring kit * Double battery cover * Batteries, 2 x 12 V/100 Ah, maintenance-free * Sideboard deflector * Three-way tipper, side walls and floor made of steel 3600 x 2200 x 400mm * Spare wheel holder, double secured * Euro 6 OBD Step E * PTO (Power Take-Off) 200 Nm for hydraulic pump * Hand throttle control for engine speed * Rear underrun protection Gjdpeyu Htlofx Af Asbl * LED front headlights * Hire purchase/financing or leasing available via Daimler Truck Financial Service Deutschland (DTFSD). We are happy to provide you with an offer. * Payload 3,800 KG * Protective grille for rear lights * Fuso safety package incl. floor mats * Short mirror bracket incl. wide-angle mirror * Valve extensions * Preparation for battery disconnect relay 12V * Tool box, mounted below on the side * Limited-slip differential lock Miscellaneous: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all transporters: Optional 12 or 24-month Mercedes-Benz used vehicle warranty available upon request. * We are happy to take back your current vehicle, offset it against this new vehicle, or pay you the purchase amount directly. * Leasing/financing possible through Mercedes-Benz Bank. We are happy to provide you with an offer. * No liability for printing or typographical errors * Subject to errors and prior sale ----

Condition: used, mileage: 473 km, power: 129 kW (175.39 HP), first registration: 06/2024, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 05/2028, color: white, gearing type: mechanical, number of seats: 3, loading space length: 6,100 mm, loading space width: 2,540 mm, loading space height: 2,550 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, Internal vehicle no.: 153329 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (postcode 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Heated exterior mirrors Interior * Driver comfort air suspension seat, horizontal suspension * Automatic climate control Safety * Driver airbag Comfort and Environment * Rear parking aid * Lane keep assist Multimedia * Radio with Bluetooth and hands-free function Additional Features * 3-year manufacturer’s warranty from first registration up to 100,000 km * 3D roof spoiler * Turning assistant * AdBlue tank cover * Double battery cover * Spare wheel holder, double secured * Euro 6 OBD Step E * Box body dimensions 6,100 x 2,540 x 2,550 mm * Tail lift 1,000 kg Gedsyvdqqepfx Af Aebl * LED front headlights * Hire purchase/financing or leasing possible via Daimler Truck Financial Service Germany (DTFSD). We will be happy to provide you with an offer. * Payload 2,910 kg * Fuso safety package incl. floor mats * Extended mirror brackets, long version incl. wide-angle mirror * Day registration to Daimler Truck AG * Valve extensions * Prepared for battery disconnect relay 12V * Permissible trailer load (braked) 3,500 kg Other information: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all vans: 12 or 24 months Mercedes-Benz used vehicle warranty available on request. * We are happy to take back your current vehicle, offset it against the new vehicle, or pay you the purchase amount. * Leasing/financing via Mercedes-Benz Bank. We will be happy to provide an offer. * No liability for printing & typographical errors * Subject to errors and prior sale ----.

Condition: used, Type: AE 100 S Gbedpfxsy Apcme Af Aol Part No.: 202-00023 Steps/revolution: 1024 Model/Version: 471/V001 Interface/Code: Parallel/Binary Output level: Push/Pull +(11-27) Volts Option: F/R, Latch incremental adjustment

Condition: excellent (used), mileage: 4,33,000 km, power: 125 kW (169.95 HP), first registration: 10/1991, fuel type: diesel, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 5, emission class: euro2, suspension: steel, permissible axle load (axle 1): 4,100 kg, permissible axle load (axle 2): 7,500 kg, loading space length: 5,250 mm, loading space width: 2,400 mm, loading space height: 520 mm, Year of construction: 1991, = Additional options and equipment = - 2 berths - 5-speed manual transmission - Heated exterior mirrors - Leaf spring suspension - Comfort driver's seat - Speed limiter - Radio/CD player - Sleeper cab = Remarks = GOOD CONDITION MERCEDES-BENZ 1117K (6-CYLINDER) SLEEPER CAB 4x2 FULL STEEL CHASSIS WITH CURTAIN-SIDED BOX, ALUMINIUM SIDE BOARDS, MANUAL GEARBOX & STEEL SUSPENSION!! 170HP, 6-CYLINDER ENGINE!! 5-SPEED MANUAL GEARBOX!! STEEL SUSPENSION!! ROOF SPOILER!! ETC.!! KOGEL CURTAIN-SIDE BOX: LENGTH x WIDTH x HEIGHT Approx. 5.25 x 2.40 x 2.30 M!! Gbsdpsxp Hhwsfx Af Asl ALUMINIUM SIDE BOARDS!! GOOD DRIVING TRUCK, READY FOR HEAVY-DUTY TRANSPORT JOBS!! MORE MERCEDES-BENZ 4x2 / 6x4 / 6x6 / 8x4 / 8x8 (CONSTRUCTION) TRUCKS AVAILABLE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPPING, LOADING, TRANSPORT, TRANSIT REGISTRATION OR HANDLING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR WEBSITE FOR CURRENT STOCK; YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical information Number of cylinders: 6 Engine displacement: 5,958 cc Transmission Gearbox: 5-speed manual gearbox, 5 gears, manual transmission Axle configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Tyre size: 285/70R19.5; Max. axle load: 4,100 kg; Steered; Tyre tread left: 40%; Tyre tread right: 40% Rear axle: Tyre size: 265/70R19.5; Twin wheels; Max. axle load: 7,500 kg; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80%; Single reduction Weights Unladen weight: 4,950 kg Payload: 6,050 kg gross vehicle weight: 11,000 kg Functional Body make: KOGEL OPEN BOX WITH CURTAIN AND ALUMINIUM SIDE BOARDS Loading platform height: 102 cm Condition Technical condition: very good Visual condition: good Further information Please contact the Sales Department or Erik Engel for more information.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth Gbjdemhhypjpfx Af Ael 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time Gbodpomhh Dhjfx Af Asl - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Gsdpfx Aomhh Dzsf Aebl Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm Gjdpod Tbbdsfx Af Asbl - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth Gbsdpfx Aomhhx Iof Ajl 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Gsdpfsmhhyajx Af Asbl - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Gjdomhh Anjpfx Af Ajbl - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: Gbodpfx Afofdkb Ue Asl 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) Gbodpfx Afjguk A He Ael - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone Godpfx Aefdkbhef Ajbl - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Gbsdpsguk Dksfx Af Ael Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Godpsmhhf Sofx Af Aobl - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard Gjdpfxemhhl He Af Aebl

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Gbodjmidyfjpfx Af Asl Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Gbedjmhh Dtjpfx Af Aol Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.