Used Taper Roller Bearing for sale (14,180)

Condition: used, Year of construction: 1997, - Manufacturer Cefla / Sorbini - Type T / 20-SP-1 - year of construction 1997 - Working width 1300 mm - working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side right - Filler application cylinder ~250 mm - Hard chrome-plated metering roller 174 mm - Hard chrome-plated smoothing roller 245 mm - Reverse drive - Belt transport Bedpfxozf N E Re Abtell - Belt control - Length ~ 1640 mm - width 2590 mm - height ~ 1700 mm - Feed rate 6 - 24 m/min - Total connection 4.5 kW - Weight 2,000 kg - With switch cabinet - Volt, Hz 400 / 50 - Location, not in stock

Condition: used, Year of construction: 2001, - Manufacturer: Bürkle - Type: SLC - Year of manufacture: 2001 - Operating side: left Bsdpfx Aeykuzvebtjll - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: - Maximum working width: 1.300 mm - Minimum workpiece length: 350 mm - Maximum workpiece weight: 250 kg - Conveyor belt width 1.270 mm - Workpiece thickness 3 - 100 mm - Machine length: 800 mm - Machine width: 3.200 mm - Application roller, rubberized, EPDM approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) - Metering roller, chrome-plated, D: 174 mm - Counterpressure roller, rubberized, D: 186 mm - Conveyor speed, adjustable from approx. 8-25 m/min. - Working height ~ 900 mm + - 30 mm - Clearance height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load approx. 5.5 kW - With control cabinet - Weight approx. 1.450 kg - Location: in stock 32825 Blomberg

Year of construction: 2014, condition: used, Technical data: - Manufacturer: Cefla - Type: TR 3000 - With own control cabinet - Feed speed adjustment ~ 2,2 - 20m/min. Bjdpfjyatdzjx Abtsll - Emergency Stop - Display converter - Year of manufacture: 2014 - Transport length: 3,000 mm - Working width: 1,300 mm - Roller length: 1,450 mm - Working height: 900 +-20 mm - Roller diameter: 65 mm - Roller pitch: 125 mm - Adjustable feed (manual): 3-15 m/min - Installed power: 0.8 KW - Location: in storage

Condition: used, Year of construction: 2001, - Manufacturer: Bürkle - Type: SLC Blodpfxjyifwij Abtjl - Year of manufacture: 2001 - Right-hand operation - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: - Maximum working width: 1300 mm - Conveyor belt width: 1270 mm - Workpiece thickness 3 - 120 mm - Installation length: ~ 800 mm - Width: ~ 2,800 mm - 1 piece, rubberized application roller, approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) - 1 piece, chrome-plated metering roller, D: 174 mm - 1 piece, counterpressure roller, D: 186 mm - Transport speed, adjustable from approx. 6 - 30 m/min. - Working height ~ 900 mm - Passage height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load approx. 2 kW - With control cabinet - Weight approx. 1,400 kg - Location: in warehouse 32825 Blomberg

Condition: used, Year of construction: 2003, - Manufacturer: Cefa/Sorbini - Type: SMARTCOATER REVERSE MF - Two application units, one in REVERSE - Year of manufacture: 2003 - Working width: 1.300 mm - Working height: 880 mm - 940 mm - Workpiece height ~ 3 - 80 mm - Operating side: right - Paint application shaft 50 - 60 Shore - Roller diameter: 250 mm - Metering roller: 173 mm - Double diaphragm pump 1 piece for both application machines - Transport system with roller conveyor - Roller conveyor pitch: 150 mm - Roller diameter: 100 mm - Compressed air connection: 6 bar - Compressed air consumption: 54 NL/min. Blsdpjzmh Erofx Abtsl - Machine length: 1.640 mm - Machine width: 3.000 mm - Mobile on flanged rollers - Feed speed: ~ 4 - 20 m/min - Application quantity ~ 4 - 50 g/m² - Machine weight 2.520 kg - Control cabinet on the machine, traveling with it - With chassis - Total power 5.5 W / 30 A - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: new, load capacity: 3,000 kg, Various support blocks, rollers adjustable in 5 positions, suitable for heavy material. For transverse and longitudinal rotation. Bearing-mounted rollers insertable for longitudinal and transverse transport. Designed to relieve, for example, welding positioners or for transporting or rotating round parts. Available in various versions. Stepless height adjustment available on request. The beams themselves have a load capacity up to 6 tons. Price per piece. Prices from 450 €; with stepless height adjustment 850 €. Bjdpfx Abjy Rf S Hstjll

Condition: new, Year of construction: 2026, functionality: fully functional, Ball Roller Conveyor – Precise and Lightweight Multi-Directional Material Handling The ball roller conveyor is a specialized material handling solution designed for easy and precise maneuvering of workpieces in multiple directions. Thanks to its ball transfer units, it enables accurate positioning of workpieces of various sizes, significantly improving ergonomics and workflow efficiency at workstations such as band saws, cutting machines, CNC machining centers, and packaging machines. It is a practical, lightweight, and functional solution for supporting internal material handling processes. Key Advantages Multi-directional movement – ball transfer units allow workpieces to be freely moved in all directions. Compact design – its low weight and compact dimensions make it easy to position in confined workspaces. Height adjustment from 680–1100 mm – allows the conveyor to be adapted to different machines and workstations. Stable steel base – provides rigidity and safe operation. Easy operation – quick setup and intuitive height adjustment. Construction and Technology The conveyor is built on a rigid steel frame with a single transport module equipped with a ball transfer system. Each ball is mounted in a bearing housing, ensuring durability and virtually friction-free movement of workpieces in all directions. The design allows precise adjustment of the working height within a range of 680–1100 mm. With a working width of 400 mm, the conveyor can be used independently or as part of an integrated roller conveyor system. Precision and Productivity Unlike conventional conveyors equipped with straight rollers, the ball roller conveyor enables not only linear movement but also lateral and rotational movement of materials. This solution significantly simplifies workpiece positioning during cutting, marking, packaging, and machining operations. The operator can quickly and accurately position the workpiece, minimizing the risk of errors and damage. With a low weight of just 10 kg, the unit can be easily moved between workstations. Applications Ball transfer conveyors are widely used in industrial environments where the following are required: precise handling of large or heavy workpieces, intermediate material transport between workstations, material support during packaging, cutting, or machining operations, optimization of logistics processes in warehouses and production facilities. This type of conveyor works perfectly with conveyor lines, CNC machines, and assembly workstations. Standard Equipment Ball transfer module with a working width of 400 mm, powder-coated steel construction, height adjustment from 680–1100 mm with locking mechanism, stable base with non-slip feet. Optional Equipment Transport wheels with brakes, ball transfer modules in other widths, connection systems for additional conveyors, rubber-coated ball surfaces for handling delicate materials. Bledpozwdr Nsfx Abtel Technical Specifications Technical specification Value Working width 400 mm Height adjustment 680–1100 mm Transport dimensions (packaging) 480 × 445 × 150 mm Weight 10 kg

Condition: excellent (used), power: 23 kW (31.27 HP), fuel type: diesel, color: orange, first registration: 08/2017, Year of construction: 2017, operating hours: 3,032 h, General information Model year: 2017 Serial number: H2008891 Technical information Number of cylinders: 3 Drive: Wheel Weights Empty weight: 2.510 kg Carrying capacity: 185 kg GVW: 2.695 kg Functional Working width: 120 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request Product safety Manufacturer: Hamm DE Other information Track width: 120 cm Additional information Please contact Ernst van Hek for more information = Additional options and accessories = - Power steering - Rotating beacon - Spotlight front - Spotlight rear = Remarks = Bjdpfxjzwmgpe Abtsll Hamm HD12VV Tandem Roller (2017) Hours: 3,032 hrs | Operating Weight: 2,695 kg Engine: Kubota D1503 (22.9 kW / 31 HP at 2700 rpm) Condition: Excellent, fully tested and ready for work!

Year of construction: 2000, condition: used, machine/vehicle number: 001170, SECOND-HAND SEMICIRCULAR ROLLER CONVEYOR OMEF - CE RULES Blsdpfx Asrnkmlebtjl - SN 001170 - Year 2000

Condition: new, Year of construction: 2026, Adhesive application machine / Adhesive roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) Working width: 1,300 mm Maximum passage height: 100 mm Speed: 18 m/min Working height: 900 mm Blodpfx Abed Iz Dfetol Diameter of application rollers: 185 mm Power rating: 0.5 Hp 0.37 KW Operating side: right Electrical system: 400 V/50 Hz/3 phases Technical features: - Structure of the adhesive application machine made of welded sheet metal. - 1 motor for driving the two rollers - Adhesive application rollers coated with acid-resistant special rubber, ground to shape and grooved, wear-resistant. - The thickness of the rubber layer can be ground to shape multiple times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to a maximum of 5 mm on the workpieces. - Adhesive dosing via a distribution trough made of zinc sheet. Easily removable for cleaning. - 1 handwheel for adjusting the roller gap - Safety guard for the rollers to prevent accidents - Electrical components according to the highest quality standard - CE standard

Condition: used, Roller conveyor Length: 14m Width: 1.1m Roller width: 0.85m with spiral roller conveyor Length: approx. 7m Bledpezx Ehuefx Abtel Width: 1.1m Roller width: 0.85m Location: Germany, near Lake Chiemsee

Condition: used, Spiral conveyor system Length: approx. 6 m Width: 1.2 m with a lift for boards Location: Germany, near Lake Chiemsee Bledpfx Abezx Egkstjl

Condition: used, Powered roller conveyor Length: 9m Width: 1.4m Roller width: 1.2m Location: Germany, near Lake Chiemsee Bedpfozx Ef Tex Abtjll

Condition: excellent (used), Straightening machine, Optimatic RMO 880. Bedpozu Ix Isfx Abtoll

Condition: as good as new (ex-display), Gravity roller conveyor for pallets and metal boxes (3-lane),4.26 m, Brand new condition (without warranty) Manufacturer / System: ELD Raktártechnika Type: Gravity roller conveyor / gravity lane 3 item in stock Transportable unit: Pallet, metal box, storage container, and other custom loads Length: 4264 mm (Sections: A2 L=1768 mm + C L=2496 mm) Installation width (EL): 850 mm Usable width (CW): 810 – 812 mm Overall width: 930 mm Roller pitch: 78 mm Conveyor slope: 4% Load capacity (per unit): Minimum 120 kg when using brake rollers Maximum 720 kg (Max. weight ratio 1:4) Finish / Material: Galvanized and painted steel frame (Grey RAL 7005 / Yellow RAL 1021) Blsdpozr Hv Tofx Abtol Features: - Integrated brake rollers (with speed control against load acceleration) - 2 stop elements - Manually released intermediate stop (with yellow operating lever) - Entry guide plates (yellow) and side guide rollers - End stop Operating temperature: 0 – 45 °C (dry warehouse environment)

Year of construction: 1997, condition: used, Suitable for firing ceramics and clay, number of burners: 10+1, fuel: natural gas or liquefied petroleum gas (LPG), connected load: 8kW, length: 8800mm, width: 2200mm, height: 2300mm, with control cabinet, control panel and spare parts, the machine has few operating hours, an on-site inspection is possible. Bsdozybwbspfx Abtsll

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: 3033647, load capacity: 3,000 kg, TREPEL - 2 scissor lift tables, type CL 30/16 Serial no. 3033647, year of manufacture 1975 Bljdpfx Abezx E Nfotol Load capacity 3000 kg Each table is equipped with transport rollers and additional transport rollers are included (loose).

Condition: good (used), Powered roller conveyor, L 2450 mm, W 620 mm, NORD gear motor, data according to the nameplate. To operate the roller conveyor, a control unit must be installed, preferably with a frequency inverter for speed regulation. The roller conveyors were set up on the floor. See the attached photo with the leveling plate. Price per unit. 24 units available. Bsdpfx Asx Tfrxobtoll

Condition: good (used), Year of construction: 2006, functionality: fully functional, Tank volume: 60 liters and 30 liters Motor power: 1.9 kW Power supply: 3 x 400 V (three-phase current). Bjdpfozwmxlsx Abtell Speed: Continuous mechanical regulation (variator) in the range of approximately 53 to 288 rpm.

Condition: used, 4-roll feed unit Manufacturer: Steff Technical data - Feed rate: 6.5 - 33 m/min Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding. Blsdpfx Abozuz N Hetol

Year of construction: 1996, condition: used, machine/vehicle number: 366826, enginetype: Diesel, manufacturer: DELMAG Bsdpfxszt Uide Abtjll

Year of construction: 1990, condition: good (used), Board conveyor with side pushers - It was used after a band saw with a shift to the side with the help of a chain. - Can be used after sawing the boards. - Weight around 2 tons - length: 7,4 m, Bjdotdd Acopfx Abtsll - roller width: 400 mm, - width: 2,4 m. - electric motors: 1.1 kW, 1.5 kW

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 2,000 mm Projection: approx. 2,550 mm Bedpovnr Rrjfx Abtsll Total width: approx. 1,225 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,210 x 270 mm Number of steps: 10 steps Step height: approx. 175 mm Total length of the staircase: approx. 3,700 mm End stop: L-profile: 65 x 110 mm The end stop of the steel staircase is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel staircases were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x Steel staircase Material color: yellow Floor height: approx. 1,890 mm Projection: approx. 2,650 mm Total width: approx. 1,208 mm Stringer profile: 200 x 5 mm Railings: on both sides Bsdpfevntb Ssx Abtjll Handrail and knee rail: rectangular tubing Steps: smooth Step dimensions: 1,108 x 250 mm Number of steps: 11 steps Riser height: approx. 180 mm Overall stair length: approx. 3,320 mm End stop: L-profile: 100 x 55 mm Note: The steel staircases are partially assembled and partially unassembled. The images are for material illustration purposes only. The steel staircases are picked and shipped unassembled. This is a used item; scratches, dents, and signs of use may be present. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this is subject to additional costs which can be requested from us depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 1,9450 mm Bledpjvntmnsfx Abtol Projection: approx. 2,645 mm Total width: approx. 1,220 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,204 x 270 mm Number of steps: 10 steps Step height: approx. 190 mm Total length of the stairs: approx. 3,320 mm End stop: L-profile: 85 x 85 mm The end stop of the steel stairs is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel stairs were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.