Used Tearing for sale (220)

Condition: used, No. 04474 Veneer press Ott JU 2513 Fgedpfx Ajw Htfmjabeh Used Press plates electrically heated Press pressure hydraulic Aluminum plates, plate dimensions 2550 x 1350 mm LW 4 hydraulic cylinders each 90 mm diameter Total pressing pressure 90 tons Specific pressing pressure 2.8 - 4.0 kg/cm2 Button control for closing, opening, stop Emergency stop tear line Opening width 400 mm Total power 19 kW Sturdy construction with 3 longitudinal beams in the upper part of the press and 2 longitudinal beams in the press table Transport dimensions approx. 3000 x 1500 x 2000 mm LWH Weight approx. 4000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2024, operating hours: 61 h, Mecalac Ahlmann AX700 bucket, pallet fork, 61 operating hours, demonstration model, like new, TOP condition Year of manufacture: 2024 - Type: AX 700 - Operating hours: 61 hours - With bucket and pallet fork - 4100 mm high loader - Operating weight: 4,710 kg - Monoboom with Z-bar bucket assembly including precise parallel guidance and bucket position indicator - Mecalac Cat II-Z electro-hydraulic quick coupler - Water-cooled Deutz TD 2.9 L4 turbo diesel engine - Diesel Oxidation Catalyst (DOC) 50 kW / 68 hp - 2300 rpm - Temperature-dependent fan control - Central self-stabilizing articulated joint - Tires 12.5-18 (profile: AT 603) - Travel speed 20 km/h km/h - Sound insulation - Cyclone air filter - 2-stage - 12V electrical system - Battery master switch - Automotive hydrostatic drive - Planetary axles with disc brakes acting on all four wheels - All-wheel drive - 100% engageable differential lock on both axles - Single-circuit hydraulic system with a 62 l/min constant-displacement pump at 250 bar with priority valve for the steering supply - 1st control circuit: lift/lower and float position - 2nd control circuit: tilt/untilt - 1st additional control circuit for quick coupler - Test connection for hydraulic system Performance data Bucket position: - Tilt angle 47º - Max. dump angle at top: 45º Lifting force at ground level: 3500 daN Tear-out force: 3500 daN Thrust force: 3800 daN Tipping load: - Standard bucket, frontal: 3250 kg - Standard bucket, articulated: 2900 kg Equipment payload (level terrain): - On forks, frontal: 2100 kg - On forks, articulated: 1900 kg - Smooth joystick operation with integrated direction and speed control and differential lock actuation - ROPS comfort cab with removable upper section - Tinted windows including skylight - Parallel-guided windshield wiper - Rear window wiper - Windshield washer system, front and rear - Rear window heater - 2 large exterior mirrors - Central multifunction display with display and integrated on-board computer for machine monitoring - Tilt adjustment of the steering column Fgodpfx Aajw U Twwebeh - Multi-adjustable driver's seat - Safety belt - Coat hook - Storage compartments - 12V socket - 2 front headlights - 2 roof-mounted work lights - Tow bar Machine dimensions Height: 2470 mm Width: 1600 mm Despite the utmost care, errors in this listing cannot be ruled out. We reserve the right to make errors and to sell the machine prior to purchase.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 112A011713008, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 112A011713008 Fodpjwclgnofx Aabogh Year of construction: 2017 for parcels max. 600 mm width x 600 mm height 12-month guarantee (excluding: machine control, travel costs and wear and tear) Properties / features: - ASLF anti-strap loss function permanent strap control - Automatic tape feed - Strap width 5 - 12 mm, optional - Operator terminal with soft tension button - DAT Direct-Access-Technology - Torque-controlled retensioning force, adjustable - Single item strapping - Foot switch on the operator side - Mobile machine - Table height infinitely adjustable - Table top hinged at the front and removable at the rear - Machine colour: Frame RAL 7004 / Frame RAL 7016 - Internal strapping coil - Mains connection at the top - Strapping tape 5x0.47mm, white, 7000 m/coil, polypropylene DIN EN 13 394 The machines are delivered with this strap, the remaining strap is included. - Table top front 600, hinged - Rear table top 600, screwed

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 1,500 kg, total length: 2,985 mm, total width: 3,972 mm, total height: 3,000 mm, Equipment: documentation/manual, type plate available, The ASCO GS Medi is a reliable and efficient Grizzly screen designed for demanding applications in mining, construction, and recycling. Its robust build and stable, solid screen bars make it ideal for separating coarse material such as large rocks, soil clods, and other bulky components before they reach the main screening stage. By using strong, parallel bars set at equal distances, the ASCO GS Medi effectively retains larger particles while allowing smaller material to pass through for further processing. This not only ensures high material quality but also minimizes wear and tear on downstream equipment, extending the lifespan of the entire system and lowering maintenance costs. Built for continuous use in tough conditions, the ASCO GS Medi delivers dependable pre-screening for stone processing, demolition waste, earthmoving, and raw material extraction. Its durable design and low-maintenance operation make it a smart investment for any material processing operation that demands efficiency and long-term performance. Technical details: - System performance: 85t/h with springs, 75t/h without springs - Maximum bucket width: 3,7 m - Screen area: 6,8 m² Fgodpfx Aasw R N Ecsbeh - Weight: 1500 kg - Width: 3,97 m - Length: 2,98 m - Height: 3 m - Loading height: 2,78 m

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optiturn L44 CNC Premium CNC lathe direct from the manufacturer. L44 CNC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and long service life. Dimensions and weights Width/depth max. 2300 mm Length approx. 2530 mm Width/depth approx. 1595 mm Height approx. 1795 mm Weight approx. 2600 kg Working areas Lathe chuck diameter 150 mm Lathe chuck Hydraulic control of the clamping movement Center height 223 mm Center width 850 mm Swing diameter over machine bed 446 mm Swing diameter in the bed bridge 520 mm Swing diameter over cross slide 240 mm Bed width 300 mm Motor torque X-axis 6 Nm Z-axis 8.5 Nm Speed range Number of speed ranges 1 Speed range 10 - 3000 min¯¹ Electrical data Drive motor power 7 kW Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 23 kVA Accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Hydraulic system Motor output 0.75 kW Tank capacity 50 l Coolant system Coolant pump output 270 W Tank capacity 90 l Machine data Chuck opening diameter 40 mm Motor(s) Torque drive motor 33 Nm Tailstock Mounting MK 4 Quill stroke 165 mm Quill diameter 52 mm Spindle Spindle holder DIN ISO 702-1 No. 5 Spindle bore/bar passage diameter 52 mm Control system Type Sinumerik 828D PPU 240 System software SW 24 CNC memory 3 MB Look Ahead 50 Block change time 3 ms Number of tools 128 Travel distance X-axis 250 mm Z-axis 760 mm Vertical spindle Power drive motor continuous operation S1 7 kW Power drive motor S6-30 % operation 16 kW Drive motor torque 33 Nm Drive motor S6-30 % operation 80 Nm Feed rate Speed X-axis 15000 mm/min Z-axis 15000 mm/min Feed force Feed force X-axis 7.5 kN Feed force Z-axis 5.3 kN Tool changer Hydraulic type; VDI 30 Number of tool positions 8 pcs Mounting height, width square max. 20 x 20 mm Boring bar mounting diameter max. 25 mm SIEMENS SAFETY INTEGRATED Equipment Main spindle - Solid design Machine bed - Heavily ribbed - High rigidity and durability Guideways - Stable flat bed guide Recirculating ball screw - For high rapid traverse speeds in all axes - Less wear and tear Fsdpfew Ea Tujx Aabsgh - For high positioning and repeat accuracy Cast body - Hardened HRC48-52 and heat-treated Machine feet - Six pieces - Optimum alignment of the machine Heat exchanger - Closed switch cabinet with intelligent cooling management - Optimum temperature even at high outside temperatures Tool changing system - Eight tool stations - Hydraulic VDI30 tool changer - Pick-up height max. 20 mm Hydraulic unit - Motor power 750 W - Tank capacity 50 liters - Clamping pressure / operating pressure 2,500 - 2,942 kPa Three-jaw chuck - Hydraulic three-jaw lathe chuck Ø 150 mm - Hydraulic loosening and clamping via foot switch - Simple clamping of workpieces - Hard and soft block jaws Central lubrication system - Automatic supply at intervals - Reduces wear on bearings, ledges and ball screws - With float switch. An acoustic signal sounds if the oil level is too low

Condition: ready for operation (used), Peddinghaus extraction system installation cutting machine Year of construction: 2009 Works on 400v Working removed from machine installation Dimensions part 1: 245x180x340cm LxWxH Dimensions part 2: 160x95x285cm LxWxH Transport possible at more price. See also our other ads Also throughout the year we are looking for industrial machines. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Peddinghaus-Absaugsystem-Installationsschneidemaschine Baujahr: 2009 Operates with 400 V In funktionsfähigem Zustand aus der Maschineninstallation entfernt Dimensions part 1: 245x180x340cm LxWxH Dimensions part 2: 160x95x285cm LxWxH Transport gegen Aufpreis möglich. Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer Peddinghaus extraction system installation cutting machine Fgodpfevilz Tox Aabeh Year of construction: 2009 Works on 400v Working removed from machine installation Dimensions part 1: 245x180x340cm LxWxH Dimensions part 2: 160x95x285cm LxWxH Transport possible at additional cost. Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. The seller is not liable for typing or data transfer errors. The machine is in terms of appearance, technology and wear and tear in accordance with its age; used machines are sold without warranty. The displayed price is exclusive of VAT

Year of construction: 2025, condition: new, For dispensing double-sided adhesive tape and tear tape. However, this series is also designed for processing corrugated board. Due to the automatic non-stop feeder also larger quantities can be processed. Most paper tapes, plastic tapes, foamed tapes or reinforced tapes up to a thickness of approx. 3mm can be dispensed with the RAP applicator. The RAP applicators are available in three working widths up to approx. 100 mm tape width. In addition to solid board and cardboard, Athos machines can process a wide range of materials up to a thickness of approx. 10 mm. Also wood, metal, plastic and much more. Fgedpfx Ajhb Th Sjabsh With the RAP Mag, an applicator for magnetic tapes is also available. You are welcome to send us samples and we will clarify the suitable machine configuration with APR Solutions. For special shapes and applications, there is the Athos Industrial model series. There are different models of these machines. Please contact us which one is the right one for you.

Condition: excellent (used), Year of construction: 1996, Technical data: Fsdpsummw Tofx Aabogh maximum cutting width: 3100 mm maximum cutting performance for steel St40: 15.0 mm motorized adjustable parallel stop: 1500 mm motorized adjustable cutting gap adjustment cutting angle adjustment working height: 860 mm motor power: 22 kW side protective grille with light barrier on the back dimensions (length x width x height): approx. 4650 x 3600 x 2050 mm weight: approx. 13.5 tons We can only show a small part of our current range of used machines here. Please also visit our homepage! The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear and tear are in keeping with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 10,000 mm, total length: 9,000 mm, total height: 4,500 mm, Equipment: roof tent, NEW EQUIPMENT Our various sizes – please let us know which one you require: 6m Widths → 6.1m x 6.1m x 3.66m → from €2,599 → 6.1m x 9.15m x 3.66m → from €2,999 → 6.1m x 12m x 3.66m → from €4,499 → 6.1m x 18m x 3.66m → from €4,520 9m Widths (Arch Spacing 1m or 2m) → 9.15m x 10m x 4.5m → from €3,600 → 9.15m x 12m x 4.5m → from €4,149 → 9.15m x 16m x 4.5m → from €4,999 → 9.15m x 20m x 4.5m → from €6,799 → 9.15m x 26m x 4.5m → from €8,399 12m Widths (Arch Spacing 1.5m or 3m) → 12.2m x 12m x 6.1m → from €12,399 → 12.2m x 21m x 6.1m → from €17,999 15m Widths (Arch Spacing 1.5m or 3m) → 15.25m x 12m x 6.1m → from €14,899 → 15.25m x 21m x 6.1m → from €22,199 ☆ FINANCING OR LEASING AVAILABLE from €69.89 per month ☆ CERTIFIED PRODUCTS ☆ TRANSPARENT OFFERS ☆ INCLUDES GERMAN STRUCTURAL ANALYSIS ☆ INSTALLATION AVAILABLE ☆ OPTIONAL FIRE OR STORM INSURANCE ☑️ Genuine 750 g/m² PVC tarpaulin → more durable than standard products on the market ☑️ Extra sturdy and tear-resistant thanks to fabric reinforcement ☑️ High UV resistance ☑️ 100% waterproof Fgsdpfjudwfnox Aabsh ☑️ Extra strong, galvanized tubing for maximum stability ☑️ Suitable for year-round use ☑️ German customer service and support during purchase and assembly ☑️ Snow load: up to 130kg/m² (arch spacing 1m) and 70kg/m² (2m) ☑️ Wind load: up to wind zone 4 (1m) and up to wind zone 2 (2m) ☑️ Includes ground anchors, concrete anchors and all other small parts ☑️ Spare parts guaranteed ☑️ 5-year warranty on properly installed PVC tarpaulin ☑️ 10-year warranty against corrosion of steel frame ► Most models available for immediate delivery ► Colours: green or white ► Includes German structural analysis ► Gates at both gable ends ☏ Call us! We are happy to provide you with a non-binding offer with best price guarantee. THE IDEAL ALTERNATIVE TO TRADITIONAL CONSTRUCTIONS Optimal protection against wind, sun, rain, hail, and snow! ☑️ Mostly permit-free (unlike wooden, steel or sheet metal buildings) ☑️ No foundations required ☑️ High stability and safety (certified by German engineering office) ☑️ Decades of use: high quality, warranty, and spare part availability ☑️ Robust, corrosion-free framework ☑️ Various shapes, colours, and sizes VERSATILE APPLICATIONS ☑️ For agriculture, forestry, industry, commercial, and private use ☑️ Storage space for goods, materials, or machinery ☑️ Garage / carport for trucks, motorhomes, boats or yachts ☑️ Workshop within the lightweight hall ☑️ Construction site roofing ☑️ Shelter or stable for livestock ☑️ Barn for straw, hay, and wood ☑️ Greenhouse for plants ! Prices include structural analysis ! Delivery and installation available *Images similar • Prices & colours may vary • All prices subject to change • Please request a non-binding quote for an exact price • Available while stocks last • Non-binding offer

Condition: used, mileage: 21,000 km, power: 58 kW (78.86 HP), first registration: 11/1989, overall weight: 3,500 kg, fuel type: diesel, color: red, next inspection (TÜV): 02/2026, gearing type: mechanical, loading space width: 1,730 mm, loading space length: 3,250 mm, loading space height: 1,830 mm, Year of construction: 1989, total length: 5,350 mm, total width: 1,975 mm, total height: 2,700 mm, number of seats: 2, 1st hand – German volunteer fire brigade. Directly from the garage, deregistered as of 26.08.2025; up until then, always registered with the original title document and even the vehicle registration from 1989. Only 21,000 total kilometers driven. MOT valid until 02/2026. Very sound Bremer T1 panel van, mid-length version with factory steel high roof. Body condition in detail: Only 2 rust spots (rear right wheel arch and left side panel). Nothing else—not even at the "typical Bremer rust spots," which are all "clean" on this vehicle and have never been reworked. Only the front right wheel arch has been repaired. Normal wear and tear present. Underside is in good shape. Overall, a really good vehicle for its 36 years. The vehicle was explicitly sold to us by the original municipal owner as "accident-free." As-new winter tires (DOT 2022). Tall 270-degree rear doors and fog lights, rear axle stabilizer, and reinforced shock absorbers. Otherwise, absolute base version. No seat belts. No power steering. No ABS. Pure 1980s—back when durable, reliable vehicles were still built. There is hardly anything here that can break. OM 601 4-cylinder naturally aspirated diesel engine with 79 hp. 5-speed manual gearbox. 127 km/h is the registered maximum speed. When opened, a large mechanical running board extends from the sliding door. The vehicle was used by the fire brigade as an equipment transporter (GW) and has several racking installations, which can easily be removed if not needed. Conversion carried out by: Hermann Schmitz KG, 5901 Wilnsdorf near Siegen. Fgodpfxsw Tpfue Aabsh Registered as "Other vehicle, fire engine." Unladen weight 2,320 kg (including all fittings). Permissible gross weight – original from factory, unchanged since 1989 – exactly 3,500 kg. This means this 308 D-KA can be driven immediately with the current car driver’s license. The emergency lighting system has been removed and is no longer included. The vehicle runs very well; the transfer journey on the motorway was a real pleasure. This offer is only available to commercial buyers or public authorities. Sale subject to intermediate sale and errors. The purchase price is final, gross = net. Differential taxation according to §25a UStG as a government vehicle. Therefore, 19% VAT will not be added. VAT cannot be shown separately or deducted from the purchase price.

Condition: used, functionality: fully functional, A Kawasaki Robot D Controller Teach Pendant - Part Number 50817-1298 - Tested and working properly - some wear and tear visable - request more pictures and videos via Whats App Ready to ship worldwide Fgodoxby I Ijpfx Aabeh Export Paperwork and shipping can be arranged also

Condition: ready for operation (used), Universal external top support Plate Roller External top support to support plates during rolling. It is only the top support without the rolling machine itself. Capacity: 3000mm x 8mm. The machine is mobile and foldable. The height adjustment is by means of an electrically driven spindle on 400V. It is not attached to the roller so very versatile. Location: Hamont-Achel, Belgium Transport possible at more price See also our other ads Also throughout the year we are looking for industrial machines. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Universelle external obere Stützplattenrolle External obere Stütze zur Unterstützung der Platten während des Rollens. Es betrifft nur die obere Stütze ohne die Walzmaschine selbst. Kapazität: 3000 mm x 8 mm. Die Maschine ist mobil und klappbar. Die Höhenverstellung erfolgt mittels eine elektrisch angetriebene Spindel mit 400V. Da es nicht an der Walze befestigt ist, ist es sehr vielseitig einsetzbar. Standort: Hamont-Achel, Belgium Transport gegen Aufpreis möglich Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Fgjdpfxsvil Hco Aabeh Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer Universal external top support Plate roller External top support to support plates during rolling. It only concerns the top support without the rolling machine itself. Capacity: 3000mm x 8mm. The machine is mobile and foldable. The height adjustment is by means of an electrically driven spindle on 400V. It is not attached to the roller so can be used in a wide range of applications. Location: Hamont-Achel, Belgium Transport possible at an additional cost Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. The seller is not liable for typing or data transfer errors. The machine is in terms of appearance, technology and wear and tear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT

Year of construction: 2025, condition: new, For dispensing double-sided adhesive tape and tear tape. Most paper tapes, plastic tapes, foamed tapes or reinforced tapes up to a thickness of approx. 3mm can be dispensed with the RAP applicator. Due to the automatic non-stop feeder also larger quantities can be processed. The RAP applicators are available in three working widths up to approx. 100 mm tape width. In addition to solid board and cardboard, Athos machines can process a wide range of materials up to a thickness of approx. 10 mm. Also wood, metal, plastic and much more. With the RAP Mag, an applicator for magnetic tapes is also available. You are welcome to send us samples and we will clarify the suitable machine configuration with APR Solutions. For special shapes and applications, there is the Athos Industrial model series. There are different models of these machines. Please contact us which one is the right one for you. Fjdpfx Aashb Tb Ejbsgh

Condition: used, mileage: 3,68,000 km, power: 250 kW (339.91 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, overall weight: 19 kg, first registration: 03/2001, loading space length: 7,000 mm, loading space width: 2,450 mm, loading space height: 600 mm, color: white, Year of construction: 2001, Equipment: ABS, air conditioning, crane, Scania 114 G 340 PLATFORM 7,00 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2001 ? MILAGE: 368 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? POWER STEARING ? POWER STEERING ? TACHOGRAPH CAPACITY: 7 000 kg TOTAL WEIGHT: 19 000 kg WHEELBASE: 525 cm TIRE SIZE: 315/80R22,5 SUSPENSION: SPRING CRANE: EFFER 210 3S + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Fsdpfxsw Ikx Es Aabegh RADEK - ????? Ref. nr: 59283

Condition: new, Year of construction: 2025, CONSTMACH is proud to present the Log Washer, which stands out among sand washing machines with its innovative technology and superior performance. These high-capacity and durable machines are specially designed for heavily contaminated materials with high clay content, thus ensuring effective and thorough cleaning even in the toughest conditions. Fgjdpfx Aasud Stmobsh The CONSTMACH Log Washer effectively removes dirt and impurities by vigorously scrubbing the materials with its twin-shaft rotating pallets. This process results in cleaner and more valuable aggregates. Its durable construction is made of high quality materials and is long-lasting and reliable against harsh working conditions. You can also customise the cleaning process according to the type of materials and the level of contamination by adjusting the angle and speed of the shafts. This sand washing machine can handle large volumes of materials with ease, making it an excellent choice for high-demand operations. Moreover, despite its high capacity, it does not compromise on cleaning quality, thus ensuring efficient cleaning at all times. Thanks to its easy-to-maintain design, its components can be quickly accessed and serviced or replaced, minimising downtime and operating costs. The CONSTMACH Log Washer is versatile for use in a variety of environments. The cleaning of aggregates is the main benefit of these machines, as this process increases the durability and strength of the final building materials. It also reduces wear and tear on other processing equipment, extending its operational life and reducing maintenance costs. The CONSTMACH Log Washer represents a significant advance in sand washing technology. With its innovative design, high efficiency and durable construction, it is an indispensable tool for all industries requiring clean and high quality aggregates. By investing in the CONSTMACH Log Washer, you can increase the efficiency of your business, reduce costs and produce superior construction materials. Technical Specifications of Crawler Washer (Coarse Material Washer) (LOG WASHER) Size: 2000 x 7000 mm (Double Row) Electric Motor 2 x 37 kW, GAMAK Brand, IE3 Efficiency class, 1500 rpm Feeding Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Sheet Metal, Twisted Type Speed: 15 - 25 rpm Screws Double Row Carriage Spiral Spoons, S235JR, 8 mm Sheet Metal and Anti-Wear Sleeves to be Coated with Castings, Helices Coated with Hardox. Shaft: Cr-Ni-Mo Alloy Steel Protection GS52 Cast Steel Bearing: SKF or FAG, Heavy Duty spherical bearings Capacity 200 - 400 tph Weight 24000 kg

Year of construction: 2025, condition: used, machine/vehicle number: TSC.154.266, Application: For soil conditioning, incorporation of lime, mixed binders, sand, compost, and other soils. Crushing and disintegrating soil clumps, separating stones, branches, roots, etc. Particle size 0-60/80 mm. Aerating, shredding, tearing, and turning of biomass, organic waste, and compost. Price without mounting plate Fgodjw R Ukdopfx Aaboh Suitable for excavators from 14 t Suitable for wheel loaders from 8.5 t Weight in kg: 1450 Throughput: 44 - 65 m³/hr Leak oil connection required: no

Condition: used, A used mesh container with standard Euronorm dimensions 1200x800 mm and a capacity of 450 liters offering ample storage capacity, ideal for storing or transporting large quantities of bulk goods or loose items. Fgjdpfx Asw A N Rqsaboh Manufactured from painted steel which provides protection against rust and wear and tear, making it durable and able to

Condition: ready for operation (used), Grit pipe grinder GR 75 belt sander offered. Dimensions: 140cm x 60cm x 100cm (LxWxH) 380v With several extra rolls Location: Hamont-Achel, Belgium Transport possible at more price Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Grit pipe grinder GR 75 belt sander offered. Fedpfx Aevily Noabjgh Dimensions: 140cm x 60cm x 100cm (LxWxH) 380v With various extra rollers Location: Hamont-Achel, Belgium Transport possible at extra cost Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. The seller is not liable for typing or data transfer errors. The machine is in terms of appearance, technology and wear and tear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Angeboten wird der Kornrohrschleifer GR 75 Bandschleifer. Dimensions: 140 cm x 60 cm x 100 cm (LxWxH). 380 V Mit diversen Zusatzrollen Standort: Hamont-Achel, Belgium Transport gegen Aufpreis möglich Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Condition: new, CAT350 Marble Bucket Fodpfx Asn Tm Ekeabogh The Galen marble bucket is a specialized attachment used in the mining and extraction of marble, designed to handle the unique characteristics of this natural stone. Its construction typically includes features that minimize wear and tear, utilizing materials and engineering tailored to the hardness and abrasiveness of marble to ensure efficient excavation and prolonged bucket life. For detailed information please contact us

Condition: ready for operation (used), Year of construction: 2000, Recirculating air thermal cabinet / warming oven / drying cabinet / drying oven Alltherm WS 3750 - 1.5 - E - 24l The heated cabinet is equipped with two separately controllable chambers. Maximum temperature per chamber: 250 degrees Celsius Approximate dimensions: Fgedpfxowuqvrj Aabjh Left chamber: Height 167 cm x Width 131 cm x Depth 91 cm Right chamber: Height 167 cm x Width 145 cm x Depth 96 cm Approx. external dimensions of the entire oven: Length 380 cm x Height 250 cm x Depth 128 cm The left chamber is additionally fitted with a viewing window. Location: Siegen ____ Our general terms and conditions apply. The seller assumes no liability for typographical or data transmission errors. The information and images were provided by the owner and released for publication. The appearance of the items on offer corresponds to their age and the photos shown. The technology and wear and tear of the items offered are age-appropriate. Used machines are sold exclusively to commercial customers and without warranty.

Condition: new, Year of construction: 2023, RUF LIGNUM CLASSIC BRIQUETTING PRESS FOR WOOD Fodpfxonxkrbo Aabegh THE ADVANTAGES FOR YOU AT A GLANCE: - Fully automatic 24h operation possible - Long service life - Low maintenance costs - Compact construction - Direct incorporation into existing production facilities possible - More than 35 years’ experience The RUF LIGNUM Classic wood briquette press is ideally suited to briquetting medium quantities of wood chips that are produced as a waste product of the wood processing industry. Thanks to the process of briquetting, additional revenue can be earned and storage and transport costs are cut. Another advantage can be found in the flexibility of our wood briquette presses. They can press various grain sizes of material into high-quality briquettes, completely without the use of binding agents. As a result, as a valuable source of energy, RUF briquettes actually have a higher utilisation value and an optimum CO2 balance. Our LIGNUM range also performs well in terms of having a high level of energy efficiency and a low level of wear and tear, thanks to our innovative RUF hydraulics. - Max. throughput rate (kg/h) Wood: 410 - Power (kW): 30 - spec. Pressure, max. (kg/cm²): 1700 - briquette formats (mm): 150x60 - Size (m) Lenght x Width x Hight: 2,1 x 1,9 x 2,0 - ca. weight (t): 3,3 t - with suction hoods - PACKAGING TABLE is GRATIS

Year of construction: 2024, condition: used, machine/vehicle number: TSC.154.309, Application: Fsdpfx Aew Rrg Aeabogh For soil conditioning, mixing lime, binding agents, sand, compost, and other soils. Crushing and pulverizing soil clumps, separating stones, branches, roots, etc. Grain size 0-60/80 mm Aerating, shredding, tearing, and turning biomass, bio-waste, and compost. Price without adapter For excavators from 14 t For wheel loaders from 8.5 t Weight in kg: 1450 Throughput: 44 - 65 m³/h Leak oil connection required: no

Condition: used, A used mesh container with standard Euronorm dimensions 1200x800 mm and a capacity of 660 liters offering ample storage capacity, ideal for storing or transporting large quantities of bulk goods or loose items. Manufactured from blue painted steel which provides protection against rust and wear and tear, making it durable and able to Fgodpfxou U Azis Aabjh

Year of construction: 2023, condition: used, Application: For soil conditioning, mixing in lime, binding agents, sand, compost, and other soils. Crushing and breaking up soil clumps, separating stones, branches, roots, etc. Grain size 0-60/80 mm Aerating, shredding, tearing, and turning biomass, organic waste, and compost. Price without OQ45 For excavators from 6 t For wheel loaders from 4 t Weight in kg: 600 Throughput: 16 - 23 m³/h Leak oil line required: no Fsdpjw Ralysfx Aabogh

Condition: used, A used mesh container with standard Euronorm dimensions 1200x800 mm and a capacity of 660 liters offering ample storage capacity, ideal for storing or transporting large quantities of bulk goods or loose items. Fgjdpfx Asw Swwpeabjh Manufactured from blue painted steel which provides protection against rust and wear and tear, making it durable and able to