Used Rotary Indexing Machine for sale (65,551)

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine. Lsdpfx Alodzp T Negeab

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Ljdpfx Aljgd D U Eegsab Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Lasdpfxeu Tln Ns Algeb Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Year of construction: 1980, condition: good (used), Equipment: 4 horiz. Pinol drilling units, 3 vert. Pinol drilling units rotary table diameter: 400 mm rotary indexing table: 60° pitch weight: 2,6 to 1 switch cabinet Ljdenvdmwjpfx Algsab 1 coolant tank

Condition: used, machine/vehicle number: 65333, Equipment: type plate available, Rotary indexing machine No. 171 Coil winding machine Blume & Redecker 8 stations, double flyer, max. wire diameter: 2 x 1 mm No. 170 Coil winding machine Blume & Redecker 8 stations, single flyer, max. wire diameter: 1.4 mm Ledpfxoylx Tlj Algeab

Condition: ready for operation (used), Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible. Ledpfx Alovriq Rogeab

Condition: used, Year of construction: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of Manufacture: 1971 Weight: approx. 4,500 kg General Information / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling operations in workpieces, with manual collet clamping. Drilling units: 7 units Ledpfew E Hpvsx Algsab Station 1 – Loading and unloading Station 2 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 3 – Vertical drilling unit, type: BE VK, collet chuck mounting Station 4 – Horizontal drilling unit, type: BE VK, spindle mount: sleeve Ø 36 mm Station 5 – Vertical spindle unit, type: BE VK, spindle mount: sleeve Ø 28 mm Station 6 – Horizontal drilling unit, type BE VK with additional guide, spindle mount: sleeve Ø 28 mm Station 7 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 8 – Vertical spindle unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 28 mm Drilling feed: mechanical feed via quill Rotary indexing table: mechanically indexing, 8 positions, Ø 500 mm Workpiece clamping: manual via collet Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • Machine is designed for high-volume production • Features a robust cast machine table with chip conveyor to the rear and a separate large coolant tank • Extensive range of clamping devices and auxiliary tools included • The machine is equipped with a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Extremely stable machine bed, also ideally suited for rebuilding as a special-purpose machine

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Manufacturer: Hau Rotary table with 6 working spindles and 3 polishing stations with high pressure guns, 5,5 kW motors, Lasdpfjh Ug Ulsx Algob control cabinet

Condition: good (used), Used rotary indexing table polishing machine Manufacturer: Hau Ljdpfx Asqmfv Selgeab Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, 5.5 kW motors, gripper clamping system, switch cabinet

Condition: used, Year of construction: 2013, functionality: fully functional, Mobile valve machining / turning machine Unigrind FDA 500 for sale. The machine is used, in good condition and fully operational. Inspection and testing on site are possible. The Unigrind FDA 500 is designed for machining and repair of valve sealing surfaces, seats, and flanges. The equipment allows precise turning, milling, and surface refurbishment directly at the worksite. Specification: Model: Unigrind FDA 500 Year: 2013 Mobile valve machining machine Suitable for repair of valves, flanges, and sealing surfaces Accurate machining of flat and conical surfaces Ledpfx Ajy R R Imslgsab Fits various types of industrial valves Compact and robust design Professional industrial equipment German quality More info: Unigrind FDA 500 Suitable for energy, oil, gas, chemical, and industrial companies as well as repair workshops. If you have further questions, we will be happy to assist you.

Condition: used, Year of construction: 2019, functionality: fully functional, For sale: Unigrind KSM600 flat surface grinding/lapping table. The equipment is in good condition and fully operational. Inspection and testing on site are possible. The Unigrind KSM600 is designed for grinding and lapping flat sealing surfaces. It is suitable for machining and refurbishing surfaces of valves, gates, flanges, and other industrial components. Specification: Model: Unigrind KSM600 Stationary flat surface grinding/lapping table Intended for machining flat sealing surfaces Laodpfx Aljy R Rl Sogsb Suitable for valve, gate, and flange repair Robust industrial housing Stable and precise processing Simple and user-friendly operation Professional industrial equipment More information: Unigrind KSM600 Suitable for repair workshops, energy, oil, gas, and industrial companies. If you have any further questions, we will be happy to assist you.

Condition: used, Year of construction: 2017, Rotary indexing table Manufacturer: Expert Tünkers Type: EDX810/0250/8 Year of manufacture: 2017 Lasdpfxoyl Swwo Algob 8-station table (45° indexing) 19526ä

Condition: used, Year of construction: 2001, stations 10 / 22 tool taper SK 40 control SIEMENS SIMATIC OP 3 total power requirement ca. 112 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 7 units, drilling and thread cutting 8 units; drilling and sinking 5 units; drilling, sinking and thread- cutting 2 unit), spindle taper SK 40 each, engine power of the individual units between 4.0 and 4.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Lasdpetqqlqofx Algeb Accessories.: chucks (without jaws), chip conveyor, coolant device

Condition: used, Year of construction: 1997, stations 10 / 22 tool taper SK 40 control SIEMENS SIMATIC OP 3 total power requirement ca. 130 kW = transfer machine Ledpfx Aetqqlrjlgeab Shift drum with 10 workpiece stations, 22 machining units (drilling 10 units, drilling and thread cutting 5 units; drilling and sinking 3 units; drilling, sinking and thread- cutting 1 unit, thread cutting 3 units), spindle taper SK 40 each, engine power of the individual units between 4.5 and 5.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Permissible load max. 1000 kg Weight: 400 kg Good condition Ljdod E A I Nopfx Algjab

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technische Details Lasdoy Tlrrepfx Algjb Werkstückdurchmesser 1000 mm Werkstückgewicht - kg Werkstückhöhe - mm Steuerung Schleifspindelmotor 11 kW Gesamtleistungsbedarf 25 kW Maschinengewicht ca. 6500 kg Raumbedarf ca. 4100 x 3200 x 2600 mm Zusatzinformationen Maschine kommt aus einer Betriebsschließung Ausstattung: Kühlmitteleinrichtung 500 Liter mit Papierbandfilter 4 Stück Schleifscheiben (3 Stück unbenutzt) Technische Daten: Rundtischdurchmesser 800 mm Max. Abstand Rundtisch zu Schleifspindelmitte 850 mm Schleifscheibendurchmesser 400 mm Schleifscheibenbreite 80 mm

Condition: used, ZUMBACH - JUROCA Z 14 is a Rotary transfer machine of high precision, engineered for excellent accuracy and reliability. Capacities: 14 working positions, 6 CNC-controlled and 8 mechanical; 1 loading/unloading station; table travel 20 mm; workspace 40 mm; screw diameters 75/35/42 mm; spindle speeds 3000–18000 t/min; production 35 pcs/min. Technical data: 3x400 V 50 Hz supply; machine weight ~3500 kg; footprint 2000×2000×2400 mm; control cabinet 1200×1200×2100 mm. Equipment: integrated control cabinet (dimensions given). Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Lsdsy S Dfzopfx Algsab

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Ledjw R St Nopfx Algsab

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Serial no.: 10930 Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table - Swing-out worm for direct indexing Lodpfx Asxf Uytslgeab - Clamping via clamping lever - 14 mm T-slots in the table plate (one place damaged) - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 360 mm Table height: 130 mm Transmission ratio: 120 : 1 Clamping surface: 375 x 430 mm Lasdpfjy Sbwzsx Algsb Grid pattern on clamping surface: 400 x 125 mm, Ø 14 mm - Indirect indexing via handwheel on the worm gear, transmission ratio: 120:1 - Worm gear can be engaged/disengaged for direct and indirect indexing - Clamping via 2 clamping levers in any position - Crank handle with index plate - 1 index plate with hole counts: 22, 24, 29, 36, 37, 49, 57, 63 - 1 index plate with hole counts: 16, 27, 30, 33, 41, 47, 53, 61 - 1 index plate with hole counts: 23, 25, 28, 31, 39, 43, 51, 59 - 14 mm T-slots in the table surface - Table surface slightly face milled Overall dimensions L x W x H: 600 x 440 x 130 mm Weight: 81 kg Good condition

Condition: used, Year of construction: 1997, Fully automatic index cutting machine Equipped with: Feeding Opening Counting/cutting 1 Counting/cutting 2 Printing station 1. colour Printing station 2. colour Delivery Technical data: Max. size: 185 x 130 mm Lasdpfx Asy Syulolgeb Min. size: 50 x 60 mm Book thickness max. 15 mm (depending on product) Binding category: all standard binding sorts Cover bendable (no hardcover) Cut form angular cut Types Printing European/Arabic index combined indexes double and multiple indexes Printing: one or two colours letters and words Dürrer promotional/explanatory video:

Condition: used, Year of construction: 2016, Manufacturer : Thimonnier Model : THD 400 Year: 2016 Application: Filling pre-formed pouches or doypacks 4-station rotary turret · Solids & liquids · Atmospheric or vacuum Cycle machine – 4 stations Station 1 – Loading of sachets using a suction arm Station 2 – Opening of sachets (internal forceps + air blast) Station 3 – Filling (solid and liquid dosing) Station 4 – Sealing / closing (atmospheric or vacuum) Product discharge via flat belt conveyor Pouch sizes Max: 300 × 350 × 80 mm Min: 200 × 250 × 50 mm Other sizes available (requires replacement parts) Speed and dosage 100 kg/h (solid product) 4 to 10 bags/min depending on size Solid dosing: bowl/hopper + weighing unit 0.3–2.5 kg Liquid dosing: flow meter Submersible filling available Supply Electrical: 400 V 3-phase + N + T, 50 Hz, 8 kVA Pneumatic: 6–9 bar, 35 m³/h Water: 1–3 kg/cm², 250 L/h, free return General specifications Lodpfsy Tp D Eex Algeab Dimensions: 311 × 302 × 260 cm Weight: approx. 1,000 kg Material in contact with the product: 316 stainless steel Vacuum pump or venturi (vacuum option) Documentation available Video of workshop tests (on request) Full technical dossier (digital version) Spare parts

Condition: used, Year of construction: 1995, rotary table diameter 600 mm boring diameter 600 mm grinding height 450 mm control Siemens Sinumerik 840 C total power requirement 30 kW Lsdpfey Nfdajx Algsab weight of the machine ca. 14,5 t

Condition: used, Year of construction: 2002, Article: Rotary transfer machine Lodpjy N Agrefx Algsab Manufacturer: Pfiffner Type: Hydromat HB-32/45 Yob: 2002 Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, glue application, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1,300 mm, feed speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion projection adjustable 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) is automatically set in conjunction with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indication in the glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm 1 pc. TCT control with: Integrated industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, error diagnosis with plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle Lasdpfx Aey Ih Skjlgeb 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm) travel speed max. 30 mm/sec 1 Single-spindle vertical drilling unit from above, 0.65 kW, (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) 4 Vertical-angled clamping cylinders 10° with holders, additional 1 Keyboard with holder Availability: by arrangement; currently being overhauled at Ganner factory Location: Austria