Used Telehandler for sale (589)

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, Rotating forklift Manitou MRT 2660 vision Drive Diesel Year built 2026 Lifting height (mm) 25,900 Hjdszxug Hepfx Aahou Lifting weight (kg) 6,000

Condition: new, Year of construction: 2026, load capacity: 8,000 kg, lifting height: 27,000 mm, total length: 9,450 mm, Rotating forklift Hsdpfxeztf Ttj Aahju Magni RTH 8.27-V/D Drive Diesel Year built 2026 Lifting height (mm) 27,000 Lifting weight (kg) 8,000

Condition: used, Year of construction: 2026, load capacity: 8,000 kg, lifting height: 34,900 mm, total length: 9,290 mm, Rotating forklift Magni RTH 8.35 Drive Diesel Year built 2026 Hjdpfxeztgbls Aahsu Lifting height (mm) 34,900 Lifting weight (kg) 8,000

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 29,900 mm, total length: 9,140 mm, Rotating forklift Manitou MRT 3060 Hodpsztgdgofx Aahou Drive Diesel Year built 2026 Lifting height (mm) 29,900 Lifting weight (kg) 6,000

Condition: used, Year of construction: 2019, load capacity: 18,000 kg, lifting height: 9,630 mm, total length: 9,830 mm, - Max. Tragkraft 18000 kg - Schwerpunkt der Last 600 mm Hodpfx Aeztgg Ueahou - Max. Hubhöhe 9.63 m - Max. Reichweite 5.56 m - Neigungswinkel nach unten 105 ° - Neigungswinkel nach oben 12 ° - Äußerer Wenderadius (über Reifen) 5.5 m - Äußerer Wenderadius (mit Gabeln) 6.15 m - Niveauausgleich Regler 10 ° - Motornorm Stage IV / Tier 4 Final - Motor Modell OM 934 LA. E4-3 - Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 5100 cm³ - Nennleistung Verbrennungsmotor / Leistung (kW) 176 Hp / 129 kW - Max. Drehmoment / Motordrehzahl 750 Nm@1600 rpm - Kühlsystem des Motors Wasser - Number of batteries 2 - Batterie / Batteriekapazität 12 V / 120 Ah - Zugkraft 15970 daN - Typ Hydrostatisch - Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 - Max. travel speed 25 km/h - Feststellbremse Automatische negative Handbremse - Betriebsbremse Hydraulik - Steigfähigkeit - beladen 37 % - Pumpenart Verstellpumpe - Hydraulikfluss - Hydraulikdruck 205 l/min - 350 Bar - Motoröl 21 l - Hydrauliköl 290 l - Kapazität des Kraftstoffbehälters 315 l - Abgasnachbehandlung für Diesel (Typ AdBlue®) 63 l - Innenschallpegel (lpa) 80 dB(A) - Umgebungsgeräusch (LwA) 107 dB(A) - Vibrationswert an Händen/Armen < 2.5 m/s² - Sicherheit Zulassung der Kabine ROPS - FOPS cab (level 2) - Steuerungen JSM

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 21,800 mm, fork length: 1,200 mm, total length: 8,210 mm, - Max. Tragkraft 6000 kg - Max.Hubhöhe 21.80 m - Maximale seitliche Reichweite 18.20 m - Kippwinkel a4 12 ° - Schüttwinkel a5 110 ° - Drehung des Oberwagens 360 ° - Gewicht 18000 kg - Reifenmodelle 445/65 R22,5 - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Hersteller Yanmar - Motornorm Stage V / Stufe 4 - Motor Modell 4TN107FHT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 156 Hp / 115 kW - Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift/2 / 2 - Max. travel speed 40 km/h - Zugkraft 8600 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 260 l - Fassungsvermögen des Kraftstofftanks 270 l - Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 68 dB Hjdpfozt Tdmox Aaheu - Außenschallpegel (LwA) 108 dB - Vibrationswert an Händen/Armen < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Steuerungen 2 Joysticks - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: used, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,130 mm, · Maximale seitliche Reichweite 3.30 m · Reichweite bei max. Hubhöhe 0.50 m · Ausbrechkraft mit Schaufel 4205 daN · Überhang vorne 0.99 m · Schüttwinkel 117 ° · Kippwinkel 12 ° · Wenderadius (über Räder) 3.31 m · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Heben 7.30 s Hedpfx Aaoxd Hv Djhsu · Senken 4.95 s · Teleskop ausfahren 5.20 s · Teleskop Einfahren 3.70 s · Ankippen 3.20 s · Auskippen 3.20 s · Motor: Kubota, Motornorm, Stage V · Motor Modell V3307-CR-T-E5B · Anzahl der Zylinder - Tragfähigkeit der Zylinder4 - 3331 cm³ · Nennleistung Verbrennungsmotor / Leistung 75 Hp / 55.40 kW · Max. Drehmoment / Motordrehzahl 265 Nm @1400 rpm · Zugkraft 3240 daN · Wendelüfter Standard · Kühlsystem des Motors 2 Wasserkühler + Hydrauliköl · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre Sperrdifferenzial an der Vorderachse · Parkbremse: Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorderachsen · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 86 l/min - 235 bar · Fassungsvermögen des Kraftstofftanks: 63 l · Schallpegel (LpA) gemäß Norm NF EN 12053 geprüft: 76 dB · Umgebungsgeräusch (LwA) 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 1 · Steuerungen: JSM

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 1,740 kg, lifting height: 2,825 mm, tire size: 26 x 12.00 - 12, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, mast type: telescopic, Year of construction: 2025, Equipment: additional headlights, all wheel drive, cabin, head guard, hydraulics, standard shovel, The H&R 1507T telescopic wheel loader is our smallest telescopic yard loader – perfect for tight work spaces. With a lifting capacity of 700 kg, the H&R 1507T telescopic loader lifts loads of up to 700 kg to a height of 2.82 m. Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the 1507T loader reaches speeds of approximately 16 km/h and is comfortable to drive. The additional hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-end tools. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machines have a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 1507T Telehandler • Technical and visual optimization in-house • Efficient engine made in Germany • Telescopic boom for greater reach • Ideal for tight work spaces • Includes standard 120cm bucket • Hydraulic quick coupler • Joystick control with float position • Electric gear on the joystick • Auxiliary hydraulics for front-mounted tools • Hydraulic oil cooler • Brake inching pedal • Open cab and safety bar with removable canopy • Rotating beacon • LED work lights front and rear • Wide tires 26 x 12.00-12 • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch ball head • CE compliant (EU Machinery Directive) and approved by the German Road Traffic Licensing Regulations (STVZO) • 1-year spare parts warranty Price Net: €17,710.00 VAT: €3,364.90 € Gross: €21,074.90 Financing available! Optional 2-year warranty €590 net Pallet fork €650 net TÜV (road approval) €870 net Transport to Germany / Austria upon request Technical specifications Lifting capacity: 700 kg Lift height: 2825 mm (bottom edge of standard pallet fork) Unloading height: 2383 mm (standard bucket tipped out) Hjdpfxsv T T N Ts Aaheu Lift time / Lowering time: 4.0 / 3.5 seconds Engine: 3-cylinder Perkins Power: 25 HP Emissions class: Euro 5 Drive: Hydrostatic (PWG) All-wheel drive, speed approx. 16 km/h Dimensions: 3805 x 1160 x 2235 mm Weight: 1740 kg Tires: 26 x 12.00-12 Turning radius: 4.3 m Accessories and Spare parts are available from us. Please provide your phone number when you inquire!

Condition: excellent (used), power: 129 kW (175.39 HP), fuel type: diesel, lifting height: 30,000 mm, Year of construction: 2018, operating hours: 2,770 h, Year of manufacture: 2018 Model year: 2018 Empty weight: 21.810 kg Hodpfx Aaszp Hmtehsu Carrying capacity: 5.000 kg GVW: 26.810 kg Lifting capacity: 5.000 kg CE mark: yes Technical condition: very good Visual appearance: very good Manitou MRT 3050+ – Year 2018 | 2,770 Operating Hours | 5,000 kg Capacity | New Manitou PSE4400 Platform For sale: a very well-maintained Manitou MRT 3050+ from 2018 with 2,770 operating hours. This powerful rotating telehandler offers a 30-metre lift height and a 5,000 kg lifting capacity, making it the perfect machine for construction, industrial, steel erection and heavy lifting applications. The machine is equipped with air conditioning, radio remote control, and a new genuine Manitou PSE4400 work platform, allowing safe and efficient work at height. Its 360° rotating turret, extendable outriggers and outstanding stability ensure maximum productivity on every job site. The machine is in excellent condition, has been well maintained and is ready for immediate use. Key Features: Year: 2018 2,770 operating hours Lift height: 30 m Lift capacity: 5,000 kg 360° rotating turret Air conditioning Radio remote control New genuine Manitou PSE4400 work platform 5,000 kg winch Extendable outriggers Excellent condition Ready for immediate use A fully equipped rotating telehandler designed for maximum performance and versatility.

Condition: new, functionality: fully functional, mileage: 1 km, power: 44.13 kW (60.00 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: yellow, overall weight: 4,200 kg, empty load weight: 4,200 kg, operation weight: 4,200 kg, maximum load weight: 1,900 kg, lifting power: 1,900 kg/m, lifting height: 6,015 mm, tire size: 400/60-15.5, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 4x4, number of seats: 1, first registration: 01/2026, emission class: euro5, mast type: telescopic, brakes: other, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: GG1900T, Equipment: additional headlights, all wheel drive, cabin, hydraulics, Telehandler GG1900T The GG1900T telehandler from Gunter Grossmann is a powerful and versatile machine, engineered to deliver outstanding performance in demanding sectors such as construction, agriculture, and manufacturing. Built with advanced technologies and robust components, it guarantees high efficiency, reliability, and operator comfort, even on challenging terrain. Engine and Power – Reliable Performance Powered by a 61 HP (45 kW) Yuchai engine, the GG1900T delivers ample power for handling heavy loads and completing tasks quickly and efficiently. This reliable engine contributes to the machine's durability and ensures consistent performance during demanding workdays. Hydraulics and Steering – Precise Control The articulated hydraulic steering system provides precise manoeuvrability, especially in confined spaces. With a hydraulic working pressure of 16 MPa, the system offers powerful and responsive control, enhancing both safety and comfort during operation. Working Range and Lifting Capacity – Excellent Efficiency The GG1900T has a lifting capacity of 1,900 kg and a bucket capacity of 0.8 m³, ensuring efficient material handling. With a maximum lifting height of 5,680 mm, it offers versatility and precision for a wide range of applications in diverse environments. Operator Safety and Comfort – Advanced Features Designed with the operator in mind, the GG1900T features an adjustable steering wheel for ergonomic control, LED headlights for improved visibility in low-light conditions, and a reversing camera for enhanced safety during manoeuvres. Hydraulic disc brakes and a four-wheel drive system guarantee stability and control on all terrains. Technical Specifications Engine model: Yuchai Rated power: 61 HP (45 kW) Total machine weight: 4,200 kg Lifting capacity: 1,900 kg Pressure: 16 MPa Fuel tank capacity: 60 L Steering system: Articulated hydraulic steering Drive system: Four-wheel drive Hour meter: Yes Tyre size: 400/60-15.5 Work light: LED Reversing camera: Yes Steering wheel: Adjustable Mechanical joystick: Yes Brake system: Hydraulic disc brake Maximum speed: 20 km/h Hjdpfx Aeytymisahsu Wheel diameter: 920 mm Bucket capacity: 0.8 m³ Maximum lift height: 5,680 mm Mid lift height: 4,450 mm Minimum working height: 3,450 mm Overall length (with extended equipment): 6,015 mm Width: 1,900 mm Overall height (folded position): 2,620 mm Ground clearance: 400 mm Wheelbase: 3,259 mm Distance from front axle to end of equipment: 1,500 mm Distance from rear axle to end of machine: 2,359 mm Minimum height with boom lowered: 1,652 mm Base length (without equipment): 5,115 mm

Year of construction: 2022, condition: used, For inquiries about the attachment, Mr. Herden will assist you (by phone). Westtech Woodcracker CL320 Felling Grapple / in stock & immediately available / Year of manufacture: 2022 / DEMO unit / like new Price: €8,890.00 net / €10,579.10 gross Hodpfxeyix N Us Aahju Cutting diameter softwood (mm): 400 Cutting diameter hardwood (mm): 320 Grapple opening = shear opening (mm): 1,060 Own weight (basic – fully equipped) (kg): 620 – 1,170 Recommended main circuit oil flow (l/min): 70 – 150 Recommended main circuit operating pressure (bar): 280 Recommended auxiliary circuit oil flow (l/min): 45 – 60 Recommended auxiliary circuit operating pressure (bar): 200 Carrier vehicle operating weight (t): 12 – 20 We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. Our warehouse holds a wide selection of various Westtech products, all immediately available! Mr. Herden will be happy to assist you (by phone). Upon request, we can also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Errors and prior sale excepted! Internal ref. no.: 121059-F = More information = New: No Part suitable for: Application in forestry Please contact Marius Herden for further information.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone at ...). Kinshofer Clamshell Bucket / Two-Shell Grab / Grab / KM 604 - 350 / NEW Price: €5,300.00 net / €6,307.00 gross Capacity (liters): 350 Build width E (mm): 650 Max. opening (mm): 1,390 Number of teeth: 5 Weight (kg): 240 Closing force (kN): 20 Lifting capacity (kg): 3,000 - Incl. bolt-on excavator teeth - Incl. KM 04 F rotator Operating pressure at flow rate: 26 – 32 MPa (260 – 320 bar) at 40 – max. 75 l/min The KM 604 is a practical two-shell grab for everyday use – robust, functional, and cost-effective. - Maximum dumping height thanks to compact design with horizontal cylinder layout. - Long service life due to use of cutting edge material with 500 HB Brinell hardness and generously dimensioned bearings. - Synchronous shell movement ensured by a sturdy, forged equaliser linkage. - Bolt-on excavator teeth included in delivery. - Excellent digging performance thanks to high closing force (20 kN at 26 MPa operating pressure). Hedpsyi Rz Nsfx Aaheu We have a very large selection of various attachments in stock and available for immediate delivery! Mr. Herden (phone: ...) will be happy to assist you. Financing options are available upon request. We are an official dealer and service partner for: Magni Telehandlers Westtech Gierking GMT OilQuick Weber MT Holp DMS Seppi M. JCB Construction Machinery Mercedes-Benz Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = Application: Construction Please contact Marius Herden for further details.

Condition: used, gearing type: automatic, lifting height: 26,000 mm, Year of construction: 2024, operating hours: 849 h, Magni RTH 6.26 Telehandler, year of manufacture: 2024, operating hours: only 849h! Equipped with Magni quick coupler, pallet forks, radio remote control, work basket pre-installation, 3rd hydraulic circuit, air conditioning, radio, touchscreen display, ROPS/FOBS cab, engine: Deutz [100kW/136hp], scissor stabilizers, automatic self-leveling, 20km/h (optionally 40km/h), maximum lifting height: 25.8m, horizontal outreach: 22.2m, maximum lifting capacity: 6,000kg, weight: 19,600kg. Machine is in very good condition and immediately available! Optional for an additional charge: - 5t winch = €7,500 net Leasing or financing offers available on request. Mr. Mihm (Tel.) is happy to assist. For more information, please visit our website. Subject to prior sale and errors. Power steering, enclosed cab, protective roof = Additional Information = Hodpfeyfu Tuex Aahou Engine type: Diesel Lifting capacity: 6,000kg Please contact Tobias Ebert for further details.

Condition: used, Year of construction: 2022, load capacity: 9,000 kg, lifting height: 7,000 mm, total length: 7,360 mm, - Max. Tragfähigkeit bei 600 mm LSP 9 000 kg - Max. Hubhöhe 6.84 m - Max. Reichweite 3.72 m - Heben 9.2 s - Senken 7.8 s - Teleskop Ausfahren 6.6 s - Teleskop Einfahren 6.1 s - Betriebsbremse Ölbad Lamellenbremse an Vorder- und Hinterachse - Parkbremse Automatische Negativbremse - Hubraum 4.5 l - Leistung 141 PS / 104 kW - Max. Drehmoment 534 Nm / 1500 U/min - Einspritzung direkt - Zugleistung (unter Last) 10.905 daN - Steigfähigkeit (beladen) 48% - Getriebe hydrostatisch - Fahrtrichtungswahl elektro-hydraulisch - Anzahl Gänge vorwärts / rückwärts 2/2 - Max. Fahrgeschwindigkeit 30 km/h - Achsen DANA - Lenkarten Allradlenkung mit 3 Lenkarten - Hydraulikbedienung JSM® Multifunktions Joystick - Lastmomentanzeige und Überlastabschaltung nach EN 15000 Norm Hsdpfoztgdmsx Aaheu - Hydraulik variable Axialkolbenpumpe - Load Sensing Pumpe 180 l/min - 270 bar - Hydrauliköl 151 l - Kraftstoff 150 l - Wenderadius (Aussenkante Räder) 4.88 m - Kippwinke Geräteaufnahme (An- / Auskippen) 137 ° - Innenschallpegel (LpA) 79.7 dB - Außenschallpegel (LwA) 103 dB - Vibrationswert an Händen / Armen

Condition: used, Year of construction: 2022, operating hours: 131 h, lifting height: 4,000 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, YEAR OF MANUFACTURE: 2022 HOURS: only 131h! JCB TELEHANDLER TLT35-22E - Fully electric industrial telescopic handler - Lifting height: 4.00 m Load capacity: 3,500 kg - Immediately available & directly from the JCB dealer! - - CommandPlus cab with heating, driver's seat with air suspension + heating - Joystick control / single-lever control like on wheel loaders / telescopic loaders - Load moment indicator with overload cut-off according to EN15000 - LED lighting front and rear - 1x charger - 1x auxiliary hydraulics (side shift) - Reversing warning device "noise" - BlueSpot (optical warning device) - Pneumatic tires: Front 27x10x12 & Rear 21x8-9 - Radio - LiveLink telemetry system hardware incl. remaining license - 1x hydraulic quick coupler - 1x pallet fork FEM3A with fork tines 1,200 mm - 1x side shift, integrated - 1x hydraulically secured quick coupler - We are a JCB contract partner (A-dealer) - We kindly request that you arrange an appointment before your visit. Please contact Mihm Sebastian (tel.: Do you need transport? We work with various logistics companies. Unless otherwise stated, the sale of used vehicles is without any guarantee or warranty. Hodozbgnpepfx Aahju We are an authorized Mercedes Benz service partner, JCB contract partner, IVECO contract partner and MAGNI contract partner. Always over 700 trucks / commercial vehicles, used & new construction machinery, aerial platforms, forklifts, telescopic loaders and more! This offer is non-binding. Errors and prior sale excepted. Power steering, cab = Further information = Lifting capacity: 3,500 kg Overall height: 224 cm Please contact Tobias Ebert for further information.

Condition: new, functionality: fully functional, power: 55.16 kW (75.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 5,500 kg, lifting power: 4,050 kg/m, lifting height: 5,499 mm, tire size: 16x70-20, number of seats: 1, shovel volume: 1 m³, Year of construction: 2026, Equipment: additional headlights, adjustable boom, all wheel drive, hydraulics, onboard computer, standard shovel, The HZM 825-T Profi is the flagship model in the HZM telehandler series, offering maximum performance, maximum reach, and maximum reliability. Powered by the robust Yunnei diesel engine with 75 hp / 55 kW and Bosch common-rail high-pressure injection, it achieves a tipping load of 4,050 kg at the attachment point and a lifting height of 4,541 mm – figures that other telehandlers in its class cannot match. The operating weight of 5,500 kg ensures maximum stability, even with the telescopic arm fully extended and carrying the maximum load. As standard, the machine is equipped with a 1.0 m³ standard bucket with a Euro attachment and a hydraulic quick-change system for tool-free attachment changes from the driver's seat. With a lifting height of 4,541 mm, the HZM 825-T Profi reaches areas that are usually reserved for cranes or forklifts: truck loading ramps, building openings on the third floor, high warehouses, and agricultural silos. The powerful torque converter transmission with powershift function ensures powerful, smooth movements even under maximum load, and the electronically controlled reversing switch on the joystick enables quick changes in direction without having to move your hand. The fully equipped cabin offers a sprung comfort seat, heating, ventilation, windshield wipers with a washer system, lockable doors, and a standard rearview camera. A complete LED lighting system with main and work headlights, as well as a rotating beacon, enables operation even in the early morning and during night shifts. Rear hydraulics and a 13-pin socket according to EU standards for trailers and electric tools are also included as standard. The machine is CE-certified according to EU Machinery Directive 2006/42/EC and complies with the EN 474 standard for earth-moving machinery. Each machine undergoes a complete quality and function test before delivery. The scope of delivery includes the COC document for straightforward road approval. For operation on public roads, a driver's license of class L (up to 25 km/h) is sufficient; no driver's license is required on private property. A 2-year manufacturer's warranty is included. Technical data: Feature Value Engine Yunnei DEF20CAF4, Diesel, Bosch Common-Rail Engine power 55.8 kW / 75 hp Max. torque 320 Nm Drive type Torque converter with powershift, 2 forward gears Maximum speed 20 km/h Fuel tank 98 l Hydraulic tank 95 l Max. hydraulic pressure 180 bar Max. hydraulic flow rate 120 l/min Operating weight 5,500 kg Tipping load at the attachment (machine level) 4,050 kg Standard bucket 1.0 m³ Lifting height (telescopic arm, lower edge of bucket) 4,541 mm Turning radius inside / outside 1,892 mm / 4,043 mm Equipment / Highlights: Full cab with heating, ventilation, rearview camera; sprung comfort seat; adjustable steering wheel; LED main and work headlights; rotating beacon; windshield wiper/washer system; electronic Profi joystick for driving, telescopic function, and hydraulic circuit; Euro quick-change system with pressure relief; 3rd/4th hydraulic circuit with continuous pressure function; rear hydraulics with 13-pin socket; Powershift function (automatic neutral position when braking); floating position; hydraulic auxiliary oil cooler; lockable doors. Hodpezzxt Ajfx Aahju Scope of delivery: HZM 825-T Profi including Euro attachment & 1.0 m³ standard bucket, German operating manual, COC documentation, 2-year mobile warranty with free choice of workshop, invoice with VAT shown. Financing/Leasing: Available upon r

Condition: used, Year of construction: 2011, operating hours: 4,116 h, 2011 | Dieci Pegasus 45.21 | Used Telescopic Forklift | 4116 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 78400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 55 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The state of preservation of the rotary telescopic is bad. Significant wear on the seat base, impact on rigid piping on boom. The left rear tire is out of service. Engine noise when starting cold. Support for the left rear light is damaged. The auxiliary remote control is heavily damaged. One of the two batteries is out of service. Noise in the transmission. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41109 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Hodpfx Aezv Emreaheu ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2021, load capacity: 9,000 kg, lifting height: 6,840 mm, total length: 6,473 mm, - Max. Tragfähigkeit bei 600 mm LSP 9 000 kg - Max. Hubhöhe 6.84 m - Max. Reichweite 3.72 m - Heben 9.2 s - Senken 7.8 s - Teleskop Ausfahren 6.6 s - Teleskop Einfahren 6.1 s - Betriebsbremse Ölbad Lamellenbremse an Vorder- und Hinterachse - Parkbremse Automatische Negativbremse - Hubraum 4.5 l - Leistung 141 PS / 104 kW - Max. Drehmoment 534 Nm / 1500 U/min - Einspritzung direkt - Zugleistung (unter Last) 10.905 daN - Steigfähigkeit (beladen) 48% - Getriebe hydrostatisch - Fahrtrichtungswahl elektro-hydraulisch - Anzahl Gänge vorwärts / rückwärts 2/2 Hsdpfx Aajztgl Rjheu - Max. Fahrgeschwindigkeit 30 km/h - Achsen DANA - Lenkarten Allradlenkung mit 3 Lenkarten - Hydraulikbedienung JSM® Multifunktions Joystick - Lastmomentanzeige und Überlastabschaltung nach EN 15000 Norm - Hydraulik variable Axialkolbenpumpe - Load Sensing Pumpe 180 l/min - 270 bar - Hydrauliköl 151 l - Kraftstoff 150 l - Wenderadius (Aussenkante Räder) 4.88 m - Kippwinke Geräteaufnahme (An- / Auskippen) 137 ° - Innenschallpegel (LpA) 79.7 dB - Außenschallpegel (LwA) 103 dB - Vibrationswert an Händen / Armen

Condition: used, Year of construction: 2018, For inquiries regarding the vehicle, please contact Mr. Herden (at tel. number). Pefra trailer 3100 / Loading platform length: 2.55 m / Permissible total weight: 2,810 kg / Year of manufacture: 2018 Price: €3,990.00 net / €4,748.10 gross - Permissible driving speed (km/h): 25 - Load capacity (kg): 2,000 - Unladen weight (kg): 810 - Permissible total weight (kg): 2,810 - Loading area width (mm): 2,550 - Loading area length (mm): 1,320 - Loading area height (mm): 600 The previous owner was the German Armed Forces. A total of three identical trailers are available. We have a very large selection of various trailers in our warehouse that are immediately available! Mr. Herden (tel. number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 150400 = Further information = GVW: 810 kg Please contact Marius Herden for more information. Hodezpdhhjpfx Aahju

Year of construction: 2016, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number). Stabau roller tracks S1-RGSCH 100 / 8, load capacity / year of manufacture: 2016 / in stock & immediately available / very good condition Price per pair: €2,190.00 net / €2,606.10 gross Load capacity: 8,000 kg Load center of gravity: 1,500 mm Weight: 710 kg (complete set) Overall length: 3,000 mm Overall width: 500 mm Please refer to the attached images for precise pocket dimensions. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (tel. number) will be happy to assist you. Upon request, we will gladly provide you with a financing offer. We are the official Magni telehandler sales and service partner. We are the official Holp sales and service partner. We are the official Gierking GMT sales and service partner. We are the official OilQuick sales and service partner. We are the official Weber MT sales and service partner. We are the official Westtech sales and service partner. We are the official DMS sales and service partner. We are the official Seppi M. sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Hsdpeznryijfx Aaheu We will supply you with the complete Magni range! Subject to errors and prior sale! Internal ID: 160520 = Further information = New: No Suitable for: Machines for loading and unloading Please contact Marius Herden for further information.

Year of construction: 2020, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Magni Rotating and Extendable Work Platform for Roof Work / 1,000 kg / Suitable for RTH Series / Year of Manufacture: 2022 Price: €17,890.00 net / €21,289.10 gross - Max. load capacity: 1,000 kg - Width: 1,800 mm - Length (closed): 2,470 mm - Length (extended): 3,420 mm - Front opening: 2,020 mm - Frontal descent: 740 mm - Rotation range: +/- 90° - Maximum occupants: 3 - Automatic attachment recognition: yes Key features: Hodpfx Aajzgq U Njhju - Rotating, extendable work platform - Foldable guardrail for safe entry and exit - Suitable for entering/exiting at height - Sensor monitoring prevents machine movement when the entry is open - Galvanised, reinforced steel construction - Non-slip flooring for safe work at heights - Overload sensor - Rack-and-pinion drive ensures smooth and jerk-free rotation during start-up and braking - Equipped with convenient fork pockets for transportation by forklift - Remote control is required for using the work platform and must be installed on the machine This attachment is suitable for the RTH series. Product code: ATT-01-020 We have many other immediately available attachments for Magni in stock! Mr. Herden (Tel. ...) will be happy to assist you. We are pleased to provide financing options upon request. We are official sales and service partners for Magni, OilQuick, Weber MT, Holp Telehandlers, DMS, Seppi M., Westtech, JCB Construction Machinery, Mercedes-Benz, and Iveco. With 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the full range of Magni products! Subject to prior sale and errors. Internal No.: 019085 = Further information = New: No Usage: Construction Contact Marius Herden for more information.

Condition: used, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,145 mm, ・Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 Hjdpfxoztgl Ds Aaheu ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: new, Year of construction: 2023, load capacity: 3,300 kg, lifting height: 9,070 mm, fork length: 1,200 mm, total length: 5,878 mm, · Schüttwinkel: 12 Grad · Kippwinkel 114 Grad · Heben: 8,90s · Senken: 5,70s · Wenderadius (über Räder): 3,80m · Teleskop ausfahren: 14,6s · Teleskop einfahren: 8,80s · Ankippen: 3,30s · Auskippen: 3,10s · Motomom: Stage V / Tier 4 final · Anzahl der Zylinder / Tragfähigkeit: 4 - 3621 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW): 75 Hp / 55 kW · Max. Drehmoment / Motordrehzahl: 340 Nm @ 1600 rpm · Zugkraft 7320 daN · Anzahl der Gänge (v/h): 4/4 · Maximale Geschwindigkeit: 24,90 km/h · Hydraulikfördermenge / Hydraulikdruck: 92,7 l/min / 260 bar · Motoröl: 10l · Hydrauliköl: 128l · Fassungsvermögen des Kraftstofftanks: 120l · Geräuschpegel im Fahrerstand (LpA): 79 dB · Umgebungsgeräusch (LwA): 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 Hodpfx Aexd Enfeahju · Sicherheit Zulassung der Kabine: Standard EN 15000 / Cabin ROPS - FOPS Level 2 · Max. Hubhöhe: 9,07 m · Max. Auslage: 6,35 m · Ausbrechwinkel mit Schaufel: 5770 daN

Condition: used, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 29,900 mm, total length: 9,140 mm, Rotating forklift Manitou MRT 3060 Drive Diesel Year built 2026 Lifting height (mm) 29,900 Hedpfxoztgguj Aahju Lifting weight (kg) 6,000

Year of construction: 2021, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Euroholz deep bucket / bucket / OQ70/55 / 800 mm / year of manufacture: 2021 / in stock & immediately available Price: €2,990.00 net / €3,558.10 gross - Cutting width (mm): 800 - Own weight (kg): 641 - Capacity (liters): 640 Features: - Incl. OQ70/55 quick coupler We have a very large selection of different buckets in our warehouse that are immediately available! Mr. Herden (phone number available upon request) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Hsdoz Ht Hfjpfx Aahsu Errors and prior sale excepted! Internal number: 101942 = Further information = New: No Intended use: Construction Unladen weight: 641 kg Please contact Marius Herden for further information.